Temperature dependence of fractal dimension of grain boundary region in SnO2 based ceramics

Fractal dimensions of grain boundary region in doped SnO2 ceramics were determined based on previously derived fractal model. This model considers fractal dimension as a measure of homogeneity of distribution of charge carriers. Application of the derived fractal model enables calculation of fractal dimension using results of impedance spectroscopy. The model was verified by experimentally determined temperature dependence of the fractal dimension of SnO2 ceramics. Obtained results confirm that the non-Debye response of the grain boundary region is connected with distribution of defects and consequently with a homogeneity of a distribution of the charge carriers. Also, it was found that C-T-1 function has maximum at temperature at which the change in dominant type of defects takes place. This effect could be considered as a third-order transition.

Temperature dependence of electron properties of Sn doped In2O3 nanobelts

This paper reports on the measurements of transport properties of high crystalline quality Sn doped In2O3 nanobelts. The samples presented metallic conduction in a large range of temperatures; however, at low temperatures, the resistivity showed a slight increase and the current-voltage curves showed a tendency to saturate even in the low-voltage range. From these observations, we discuss some arguments on the possibility of low dimensional conducting channels as the main responsible for the conduction at low temperatures. Additionally, we present an alternative technique for production of low resistance ohmic contacts, which can be further used in devices' construction. (C) 2007 Elsevier B.V. All rights reserved.

A model for optimal chemical control of leaf area damaged by fungi population - Parameter dependence

We present a model to study a fungi population submitted to chemical control, incorporating the fungicide application directly into the model. From that, we obtain an optimal control strategy that minimizes both the fungicide application (cost) and leaf area damaged by fungi population during the interval between the moment when the disease is detected (t = 0) and the time of harvest (t = t(f)). Initially, the parameters of the model are considered constant. Later, we consider the apparent infection rate depending on the time (and the temperature) and do some simulations to illustrate and to compare with the constant case.

Temperature and wavelength dependence of the thermo-optical properties of tellurite and chalcogenide glasses

The refractive index and the temperature coefficient of the optical path length change of tellurite (80TeO(2):20Li(2)O) and chalcogenide glasses (72.5Ga(2)S(3):27.5La(2)O(3)) were determined as a function of temperature (up to 150 degrees C) and wavelength (in the range between 454 and 632.8 nm). The tellurite glass exhibits the usual refractive index dispersion in the wavelength range analyzed, while anomalous refractive index dispersion was observed for the chalcogenide glass between 454 and 530 nm. The dispersion parameters were determined by means of the single-effective oscillator model. In addition, a strong dependence of the temperature coefficient of the optical path length on the photon energy and temperature was found for the chalcogenide glass. The latter was correlated to the shift of the optical band gap (or electronic edge) with temperature, which was interpreted by the electron-phonon interaction model. (C) 2007 American Institute of Physics.

Temperature and concentration dependence of density of model liquid foods

Density of binary solutions and combinations of sucrose, glucose, fructose, citric acid, malic acid, pectin, and inorganic salts were measured with an oscillating tube density meter in the temperature range from 10degrees to 60degreesC, at varying concentrations. Density can be predicted with accuracy better than 5 x 10(-5) g cm(-3) using predictive equations obtained by fitting the experimental data. Available literature values agreed well with experimental data. Relations for the excess molar volume of these solutions were derived in terms of mole fraction and temperature. A thermodynamic model for the volumetric analysis of multicomponent aqueous solutions containing electrolyte and non-electrolyte compounds was also proposed. These models can be used for prediction of density of liquid food systems, specially fruit juices and beverages, based on composition and temperature, with high accuracy and without elaborate experimental work.

Temperature dependence on the electrical properties of Ba(Ti0.90Zr0.10)O-3:2V ceramics

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ovarian follicle diameter at timed insemination and estrous response influence likelihood of ovulation and pregnancy after estrous synchronization with progesterone or progestin-based protocols in suckled Bos indicus cows

The objectives of the present study were to evaluate factors associated with estrous synchronization responses and pregnancy per insemination (P/AI) in Bos indicus beef cows submitted to progesterone-based fixed-time artificial insemination (FTAI) protocols. A total of 2388 cows (1869 Nellore and 519 crossbred Nellore x Angus) from 10 commercial farms were evaluated to determine the relationships among breed, body condition score (BCS) on the first day of the FTAI protocol, the occurrence of estrus between progesterone device removal and FTAI and diameter of largest ovarian follicle (LF) at FTAI on estrous synchronization responses and P/AI. Cows (n=412 primiparous; 1976 multiparous) received an intravaginal device containing progesterone or an ear implant containing norgestomet (a progestin), and an injection of estradiol at the beginning of the estrous synchronization protocol. Body condition was scored using a 1-5 scale on the first day of the FTAI protocol and at 30-60 days postpartum. Females received 300IU of equine chorionic gonadotropin (eCG) and PGF(2 alpha) on the day the progesterone device/implant was removed and were inseminated 48-60h later. At insemination, cows (n=2388) were submitted to an ultrasonographic exam to determine the diameter of the LF. Follicles were classified into four categories based on mean and standard deviation (SD) of the LF (LF1 = two SD below the mean; LF2 = mean minus one SD; LF3 = mean plus one SD; LF4 = two SD above the mean). Ovulation rate was determined in a subset of cows (n=813) by three consecutive ultrasonographic exams: (1) at time of progesterone device/implant removal, (2) at time of FTAI and (3) 48 h after FTAI. Ovulation was defined as the disappearance of a large follicle (>= 8.0 mm) that was previously recorded. Estrus was determined in a subset of the cows (n = 445) by the activation of a detection of estrous patch placed on the tail head on the day of progesterone device/implant removal. Pregnancy was diagnosed 30 days after FTAI. Pregnancy was influenced (P = 0.001) by follicle diameter [LF1 = 27.5% (81/295), LF2 = 46.6% (328/705), LF3 = 57.9% (647/1118), LF4 = 63.3% (171/270)] and the occurrence of estrus [estrus = 67.7% (174/257) and no estrus = 36.2% (68/188)]. Follicle diameter at FTAI influenced ovulation rate [LF1 = 42.5% (34/80), LF2 = 73.9% (161/218), LF3 = 95.8% (407/425), LF4 = 97.8% (88/90)], the occurrence of estrus [LF1 = 54.8% (51/93), LF2 = 33.6% (43/128), LF3 = 68.9% (126/183), LF4 = 90.2% (37/41)] and P/AI among cows that had ovulations [LF1 =32.4% (11/34), LF2 = 50.3% (81/161), LF3 = 60.0% (244/407), LF4 = 68.2% (60/88)]. Improving estrous responses between progesterone device withdrawal and FTAI and increasing the diameter of the LF at FTAI may be important aspects to achieve improved estrous synchronization responses and P/AI following progesterone/progestin and estradiol based FTAI protocols in suckled Bos indicus cows. (C) 2010 Elsevier B.V. All rights reserved.

Magnetic field dependence of the magnetic susceptibility and the specific heat of the doped plasticized polyaniline (PANI-DB3EPSA)0.5

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spatial variability of infiltration and its relationship to some physical properties

Water infiltration into soil is one of the basic factors for estimating irrigation intensity according to the plants' requirements; this is aimed at avoiding problems of surface run-off and degradation. The purpose of the present investigation was to determine the spatial variation of infiltration and its relationship to some physical properties of soil by means of geostatistical techniques in Typic Plinthaquult soils having average texture and flat relief. A 113 point mesh was designned, having a regular distance of 10 m between points, samples being taken from 0 to 0.20 meters depth. Sand, silt and clay content, bulk density, macroporosity, microporosity and total porosity were determined. Infiltration tests were carried out in the field by means of a 15 cm diameter ring. Descriptive statistics and geostatistics were used for analysing the data. Infiltration, silt and microporosity data did not fit a normal distribution curve. Infiltration had high variability, having an average 36.03 mm h(-1). Total porosity was 56.73%, this being the only property that did not show spatial dependency. The smallest ranges were observed for bulk density, macroporosity and microporosity, having values of less than 40 m. The smallest degrees of spatial dependence were observed for infiltration, silt and clay, evidence also being shown of the influence of silt and clay on infiltration rate. Contour maps were constructed; fitting them to the semivariogram models, together with studying the correlations, led to establishing relationships between the properties.

Optical transition probabilities and compositional dependence of Judd-Ofelt parameters of Er3+ ions in fluoroindate glass

Fluoroindate glasses containing 1, 2, 3, and 4 mol% ErF3 were prepared in a dry box under an argon atmosphere. Absorption spectra of these glasses at room temperature were obtained. The Judd-Ofelt parameters Ωλ (λ = 2, 4, 6) for f-f transitions of Er3+ ions as well as transition probabilities, branching ratios, radiative lifetimes, and peak cross-sections for stimulated emission of each band were determined. The concentration effect on the intensities is analyzed. The optical properties of the fluoroindate glasses doped with Er3+ ions are compared with those of other glasses described in the literature. © 1995.

On the picture dependence of Ramond-Ramond cohomology

Closed string physical states are BRST cohomology classes computed on the space of states annihilated by b- 0. Since b- 0 does not commute with the operations of picture changing, BRST cohomologies at different pictures need not agree. We show explicitly that Ramond-Ramond (RR) zero-momentum physical states are inequivalent at different pictures, and prove that non-zero-momentum physical states are equivalent in all pictures. We find that D-brane states represent BRST classes that are non-polynomial on the superghost zero-modes, while RR gauge fields appear as polynomial BRST classes. We also prove that in x-cohomology, the cohomology where the zero-mode of the spatial coordinates is included, there is a unique ghost-number one BRST class responsible for the Green-Schwarz anomaly, and a unique ghost number minus one BRST class associated with RR charge. © 1998 Elsevier Science B.V.

Preparation and characterization of glass-ceramic materials in the BaO-Li2O-ZrO2-SiO2 system and their dependence on treatment temperatures

The preparation and characterization of transparent glass-ceramics in the composition of 30Li2O:5ZrO2:xBaO:(100-x) SiO2 with x = 0, 5, 10, 15, and 20 mol% are described. Glasses were melted in a platinum crucible at 1100°C for 2 h and then heat-treated at 900°C for 3 h. The characterizations were performed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman and infrared spectroscopy, and scanning electron microscopy (SEM). The experimental results indicate that there was a structural change in the glass-ceramics as the BaO concentration in the mixture increased. In the XRD patterns of samples without heat treatment, only the halo was observed. After heat treatment, the appearance of the materials was verified by X-ray diffraction peaks. The reorganization of the amorphous solid was confirmed by Raman and IR spectroscopy along with XPS and SEM, with a more homogeneous phase formation being observed.