Tropical terrestrial model ecosystems for evaluation of soil fauna and leaf litter quality effects on litter consumption, soil microbial biomass and plant growth

The aim of this work was to evaluate whether terrestrial model ecosystems (TMEs) are a useful tool for the study of the effects of litter quality, soil invertebrates and mineral fertilizer on litter decomposition and plant growth under controlled conditions in the tropics. Forty-eight intact soil cores (17.5-cm diameter, 30-cm length) were taken out from an abandoned rubber plantation on Ferralsol soil (Latossolo Amarelo) in Central Amazonia, Brazil, and kept at 28ºC in the laboratory during four months. Leaf litter of either Hevea pauciflora (rubber tree), Flemingia macrophylla (a shrubby legume) or Brachiaria decumbens (a pasture grass) was put on top of each TME. Five specimens of either Pontoscolex corethrurus or Eisenia fetida (earthworms), Porcellionides pruinosus or Circoniscus ornatus (woodlice), and Trigoniulus corallinus (millipedes) were then added to the TMEs. Leaf litter type significantly affected litter consumption, soil microbial biomass and nitrate concentration in the leachate of all TMEs, but had no measurable effect on the shoot biomass of rice seedlings planted in top soil taken from the TMEs. Feeding rates measured with bait lamina were significantly higher in TMEs with the earthworm P. corethrurus and the woodlouse C. ornatus. TMEs are an appropriate tool to assess trophic interactions in tropical soil ecossistems under controlled laboratory conditions.

Temporary Speed Hump Impact Evaluation, 2002

The main objective of this research was to evaluate the impact of temporary speed humps and speed tables on vehicle speeds, vehicle speed profiles, and traffic volumes along local and/or collector streets in several rural Iowa cities. A 25 mile per hour (mph) temporary speed hump and a 30 mph temporary speed table, both made of recycled rubber, were purchased to test the impact of temporary devices. Two cities volunteered and the speed hump/table was installed on two test streets in the city of Atlantic (Roosevelt Drive and Redwood Drive) and one test street in the city of Le Claire (Canal Shore Drive). The speed hump was installed first and then converted to a speed table. Each device was installed for a period of at least two weeks at the same location. Speed, volume, and resident opinion data were then collected and evaluated.

Ideal culture conditions for Dicyma pulvinata conidia mass production

The objective of this work was to set up ideal conditions for conidia mass production of Dicyma pulvinata. Four isolates were compared in terms of their growth and conidia production on various substrates (grains of parboiled rice, common rice, maize and wheat, besides chipped maize and rice husk), temperatures (19, 22, 25, 28 and 31ºC), growth containers (aluminum trays, polypropylene bags and Erlenmeyers) and light regimes (continuous darkness, 6 and 12 hours of light/darkness, and continuous light). Temperature effects on conidia germination capacity were also evaluated. The experiments were done in randomized complete block designs, in factorial arrangements (isolates x treatments - substrates, containers, temperatures and light regimes), with four replicates. In general, parboiled rice and polypropylene bags provided the best development of the fungus. Complete darkness and 6 hours of light increased mycelial growth, whereas continuous light favored sporulation. All tested temperatures favored the cultures of the fungus, except 31ºC. Temperatures between 19 and 25ºC ensure spore germination of more than 76%.

Clinical effectiveness of direct class II restorations: a meta-analysis.

Purpose: More than five hundred million direct dental restorations are placed each year worldwide. In about 55% of the cases, resin composites or compomers are used, and in 45% amalgam. The longevity of posterior resin restorations is well documented. However, data on resin composites that are placed without enamel/dentin conditioning and resin composites placed with self-etching adhesive systems are missing. Material and Methods: The database SCOPUS was searched for clinical trials on posterior resin composites without restricting the search to the year of publication. The inclusion criteria were: (1) prospective clinical trial with at least 2 years of observation; (2) minimum number of restorations at last recall = 20; (3) report on dropout rate; (4) report of operative technique and materials used; (5) utilization of Ryge or modified Ryge evaluation criteria. For amalgam, only those studies were included that directly compared composite resin restorations with amalgam. For the statistical analysis, a linear mixed model was used with random effects to account for the heterogeneity between the studies. P-values under 0.05 were considered significant. Results: Of the 373 clinical trials, 59 studies met the inclusion criteria. In 70% of the studies, Class II and Class I restorations had been placed. The overall success rate of composite resin restorations was about 90% after 10 years, which was not different from that of amalgam. Restorations with compomers had a significantly lower longevity. The main reason for replacement were bulk fractures and caries adjacent to restorations. Both of these incidents were infrequent in most studies and accounted only for about 6% of all replaced restorations after 10 years. Restorations with macrofilled composites and compomer suffered significantly more loss of anatomical form than restorations with other types of material. Restorations that were placed without enamel acid etching and a dentin bonding agent showed significantly more marginal staining and detectable margins compared to those restorations placed using the enamel-etch or etch-and-rinse technique; restorations with self-etching systems were between the other groups. Restorations with compomer suffered significantly more chippings (repairable fracture) than restorations with other materials, which did not statistically differ among each other. Restorations that were placed with a rubber-dam showed significantly fewer material fractures that needed replacement, and this also had a significant effect on the overall longevity. Conclusion: Restorations with hybrid and microfilled composites that were placed with the enamel-etching technique and rubber-dam showed the best overall performance; the longevity of these restorations was similar to amalgam restorations. Compomer restorations, restorations placed with macrofilled composites, and resin restorations with no-etching or self-etching adhesives demonstrated significant shortcomings and shorter longevity.

Field capture of Thyanta perditor with pheromone-baited traps

The objective of this work was to evaluate the field attractiveness of Thyanta perditor synthetic sex pheromone-baited traps, its attractivity to other stink bug species, and the response of T. perditor to a geometric isomer of the sex pheromone. Two-liter transparent plastic bottles traps were baited with rubber septa impregnated with the treatments: 1 mg of methyl-(2E,4Z,6Z)-decatrienoate [(2E,4Z,6Z)-10:COOMe], the male sex pheromone of T. perditor; 1 mg of (2E,4Z,6Z)-10:COOMe protected from sunlight in standard PVC plumbing pipe; 1 mg of its geometric isomer [(2E,4E,6Z)-10:COOMe]; and traps with rubber septa impregnated with hexane (control). The experiment was carried out in field during the soybean reproductive stages. Traps were monitored weekly, and the captures were compared to the population density estimated by the sampling cloth and visual inspection monitoring techniques. Traps baited with the sex pheromone, protected or not, were more effective in capturing T. perditor than traps baited with the isomer or the hexane. Thyanta perditor sex pheromone showed cross-attraction to other stink bug species, such as Euschistus heros, Edessa meditabunda, Piezodorus guildinii and Nezara viridula. Pheromone-baited traps can be used in population monitoring and to identify the relative composition of stink bug guilds.

The relationship between virtual body ownership and temperature sensitivity.

In the rubber hand illusion tactile stimulation seen on a rubber hand, that is synchronous with tactile stimulation felt on the hidden real hand, can lead to an illusion of ownership over the rubber hand. This illusion has been shown to produce a temperature decrease in the hidden hand, suggesting that such illusory ownership produces disownership of the real hand. Here we apply immersive virtual reality (VR) to experimentally investigate this with respect to sensitivity to temperature change. Forty participants experienced immersion in a VR with a virtual body (VB) seen from a first person perspective. For half the participants the VB was consistent in posture and movement with their own body, and in the other half there was inconsistency. Temperature sensitivity on the palm of the hand was measured before and during the virtual experience. The results show that temperature sensitivity decreased in the consistent compared to the inconsistent condition. Moreover, the change in sensitivity was significantly correlated with the subjective illusion of virtual arm ownership but modulated by the illusion of ownership over the full virtual body. This suggests that a full body ownership illusion results in a unification of the virtual and real bodies into one overall entity - with proprioception and tactile sensations on the real body integrated with the visual presence of the virtual body. The results are interpreted in the framework of a"body matrix" recently introduced into the literature.

Is my hand connected to my body? The impact of body continuity and arm alignment on the virtual hand illusion

When a rubber hand is placed on a table top in a plausible position as if part of a person"s body, and is stroked synchronously with the person"s corresponding hidden real hand, an illusion of ownership over the rubber hand can occur (Botvinick and Cohen 1998). A similar result has been found with respect to a virtual hand portrayed in a virtual environment, a virtual hand illusion (Slater et al. 2008). The conditions under which these illusions occur have been the subject of considerable study. Here we exploited the flexibility of virtual reality to examine four contributory factors: visuo-tactile synchrony while stroking the virtual and the real arms, body continuity, alignment between the real and virtual arms, and the distance between them. We carried out three experiments on a total of 32 participants where these factors were varied. The results show that the subjective illusion of ownership over the virtual arm and the time to evoke this illusion are highly dependent on synchronous visuo-tactile stimulation and on connectivity of the virtual arm with the rest of the virtual body. The alignment between the real and virtual arms and the distance between these were less important. It was found that proprioceptive drift was not a sensitive measure of the illusion, but was only related to the distance between the real and virtual arms.

Cultivation of Flammulina velutipesmushroom using various agro-residues as a fruiting substrate

The objective of this work was to evaluate the feasibility of different agro-residues as a carbon source in the fruiting substrates of Flammulina velutipesmushroom and the effect of supplementation with the nitrogen sources spent brewer's yeast and rice bran. The following fruiting substrates were evaluated: rubber wood sawdust (SD), paddy straw (PS), palm empty fruit bunches (EFB), and palm-pressed fiber (PPF). Cultivation was done on each agro-residue, based on formulations consisting of two substrates at the ratios of 3:1, 1:1, and 1:3. Mycelial growth rate and basidiocarp yield were evaluated. The best fruiting substrates were PS+EFB (25:75), PS+PPF (50:50), and PPF (100), with biological efficiency of 185.09±36.98, 150.89±50.35, and 129.06±14.51%, respectively. No significant effects of supplementation with rice bran and spent yeast were observed on mycelial growth rate and biological efficiency. The cultivation of F. velutipes on oil palm wastes does not require additional nitrogen sources.

Injury pattern of the Flash-Ball, a less-lethal weapon used for law enforcement: report of two cases and review of the literature.

Less-lethal weapons are used in law enforcement to neutralize combative individuals and to disperse riot crowds. Local police recently used such an impact weapon, the Flash-Ball, in two different situations. This gun fires large rubber bullets with kinetic energies around 200 J. Although it is designed to avoid skin penetration, impacts at such energies may still create major trauma with associated severe injuries to internal organs. This is a report of 2 patients shot with the Flash-Ball who required medical attention. One could be discharged quickly, but the other required hospitalization for heart and lung contusion. Both patients required advanced investigations including computed tomography (CT) scan. The medical literature on injuries induced by less-lethal impact weapons is reviewed. Impacts from the Flash-Ball can cause significant injury to internal organs, even without penetration. Investigations as for other high-energy blunt traumas are called for in these cases.

Aurinkokeräimien käyttö turpeen kenttäkuivauksessa

Tämä tutkimus tehtiin osana Vapo Oy:n uuden turvetuotantotekniikan kehitystä. Kihniön Aitonevalle on rakennettu uuden turvetuotantotekniikan tutkimusalue, johon kuuluu muun muassa yksi lämmittämätön kuivatuskenttä sekä yksi aurinkolämmöllä lämmitetty kuivatuskenttä aurinkokeräimineen ja putkistoineen. Työn tavoitteena oli selvittää aurinkolämmöllä lämmitetyn kuivatuskentän tuotannon teho verrattuna lämmittämättömään kenttään. Toinen tavoite oli selvittää Aitonevan tutkimusalueella käytössä olevista aurinkokeräimistä turpeen kuivaustarkoitukseen parhaiten soveltuva keräin. Tuotantoa uudella menetelmällä tehtiin vuoden 2005 kesän ajan. Tuotantotehon ero pyrittiin selvittämään seuraamalla yksittäisten turvetuotantoerien eli satokiertojen kuivumista kosteusnäyttein ja toisaalta vertaamalla koko kesän aikana saatua tuotantoa. Aurinkokeräimien vertailu toteutettiin energiamäärä- ja hyötysuhdemittauksin. Lisäksi kuivatuskenttien lämpötiloja mitattiin kentässä tapahtuvan lämmönsiirron selvittämiseksi. Mittausten perusteella havaittiin, ettälämmitetyn ja lämmittämättömän kentän välillä on tutkimuksen aikaisella kenttärakenteella 6-8 % ero satokierron aikana haihdutetussa vesimäärässä. Tätä voidaanpitää odotuksia pienempänä. Kenttien lämpötilamittausten perusteella osoittautui, että kentän pintarakenne tulisi eristää maaperästä, koska kentän alle siirrettyä lämpöä siirtyy häviöinä kylmään pohjamaahan. Käytössä olleista aurinkokeräimistä parhaaksi osoittautui katettu kumimattokeräin niin hyötysuhteen kuin tehokkuudenkin puolesta. Työn aikana todettiin, että tutkimusta keräimien ja varsinkinkenttärakenteen suhteen tulee jatkaa tulevaisuudessa ennen aurinkokeräinkentän laajamittaisen käytön aloittamista.

Naphthylamine, 2-

2-Naphthylamine (2NA, CAS # 91-59-8) was used in as an intermediate in the dye industry and in the rubber industry. 2NA is frequently produced when nitrogenous organic materials are burned or heated. Tobacco smoke, heated cooking oil, and many other smokes contain 2NA as well as other aromatic amines. 2NA is among the most potent human urinary bladder carcinogens. It is well absorbed by all routes.

Modelling of iron-filled magneto-active polymers with a dispersed chain-like microstructure

Magneto-active polymers are a class of smart materials commonly manufactured by mixing micron-sized iron particles in a rubber-like matrix. When cured in the presence of an externally applied magnetic field, the iron particles arrange themselves into chain-like structures that lend an overall anisotropy to the material. It has been observed through electron micrographs and X-ray tomographs that these chains are not always perfect in structure, and may have dispersion due to the conditions present during manufacturing or some undesirable material properties. We model the response of these materials to coupled magneto-mechanical loading in this paper using a probability based structure tensor that accounts for this imperfect anisotropy. The response of the matrix material is decoupled from the chain phase, though still being connected through kinematic constraints. The latter is based on the definition of a 'chain deformation gradient' and a 'chain magnetic field'. We conclude with numerical examples that demonstrate the effect of chain dispersion on the response of the material to magnetoelastic loading.

Elastomeerien kesto viherlipeäkäsittelyissä

Työssä on tutkittu eri kumilaatujen soveltuvuutta viherlipeäympäristöön laboratoriomittausten avulla. Kumia tultaisiin käyttämään viherlipeälinjan letkuventtiilissä. Suomalaisista sellutehtaista saaduista viherlipeänäytteistä mitattiin alkali- ja vierasainepitoisuudet. Kumitestauksissa viherlipeässä pyrittiin selvittämään kumien kesto prosessiolosuhteita vastaavissa olosuhteissa. Kumit asetettiin kuumaan viherlipeään jännitettynä ja pidettiin siinä kolme vuorokautta. Kumista tutkittavia ominaisuuksia olivat kumin massan muutos, kovuus, vetolujuus sekä murtovenymä. Kolmen vuorokauden testien tulosten perusteella valittiin kolme kumilaatua tuhannen tunnin kestotestiin, joissa seurattiin kumin massan käyttäytymistä sekä kumin pitkäaikaisen altistamisen viherlipeässä vaikutusta lujuusominaisuuksiin. Kokeissa havaittiin osan testatuista kumeista sitovan viherlipeää itseensä, mikä aiheuttaisi viherlipeän pääsyn letkun vahvikkeisiin ja aiheuttaisi letkun hajoamisen. Osa kumeista kului kemiallisesti, mikä taas aiheuttaisi letkun rasitustilanteissa repeämiä letkun pinnassa ja lopulta letkun hajoamisen. Kuitenkin suuressa osassa testatuissa kumimateriaaleissa ei ollut suuria massanmuutoksia. Tällöin lujuusmittaukset kertoivat muilta osin kumin kestosta. Muutamilla kumeilla massanmuutokset olivat alhaisia, mutta lujuusarvot olivat romahtaneet. Kuitenkin laboratoriomittausten tulosten perusteella pystyttiin löytämään kumimateriaali, joka kestäisi paremmin viherlipeäprosessissa kuin teollisuudessa käytössä ollut kumimateriaali. Kuitenkin lopullinen varmuus tästä voidaan saada teollisuudessa tehtyjen testausten avulla.

Virtual hand illusion induced by visuomotor correlations

Our body schema gives the subjective impression of being highly stable. However, a number of easily-evoked illusions illustrate its remarkable malleability. In the rubber-hand illusion, illusory ownership of a rubber-hand is evoked by synchronous visual and tactile stimulation on a visible rubber arm and on the hidden real arm. Ownership is concurrent with a proprioceptive illusion of displacement of the arm position towards the fake arm. We have previously shown that this illusion of ownership plus the proprioceptive displacement also occurs towards a virtual 3D projection of an arm when the appropriate synchronous visuotactile stimulation is provided. Our objective here was to explore whether these illusions (ownership and proprioceptive displacement) can be induced by only synchronous visuomotor stimulation, in the absence of tactile stimulation.

Sekoitusprosessin laadunvalvonnan suunnittelu

Nokian Renkaat Oyj:ssä on suuntaus päivittäin valmistettavien kumisekoitusten määrien lisäämiseen. Sekoitusmäärien kasvaessa myös laadunvalvontamittauksien kapasiteettia pitää nostaa tai vaihtoehtoisesti vähentää näytteiden tutkimiseen kuluvaa aikaa tai tutkittavien näytteiden määrää. On mietitty, voitaisiinko näytteenottopaikkaa vaihtamalla saada edustavampi näyte. Aikaistamalla näytteenottopaikkaa näytteet saataisiin tutkittua aikaisemmin ja siten sekoitukset saataisiin käyttöön entistä nopeammin. Teoriaosassa käsitellään kumisekoitusprosessia ja tutustutaan käytettävään prosessilaitteistoon ja prosessin eri vaiheisiin. Lisäksi tutustutaan prosessin ohjaukseen, prosessimittauksiin, prosessin säätöihin ja hälytyksiin. Työssä käsitellään myös laatuun vaikuttavia tekijöitä ja perehdytään käytössä oleviin laadunvalvontamittauksiin ja näytteiden analysointiin. Kokeellisessa osassa tutkitaan, mikä olisi paras näytteenottokohta, mietitään mittausten ja mittausajan vähentämisen vaikutuksia sekä sitä, miten näytteet tulisi merkitä. Lisäksi kokeellisessa osassa tehdään neuroverkkomalli viskositeetin ennustamiseksi.