979 resultados para Clinical consumption materials
Resumo:
Information on fruits and vegetables consumption in Brazil in the three levels of dietary data was analyzed and compared. Data about national supply came from Food Balance Sheets compiled by the FAO; household availability information was obtained from the Brazilian National Household Budget Survey (HBS); and actual intake information came from a large individual dietary intake survey that was representative of the adult population of São Paulo city. All sources of information were collected between 2002 and 2003. A subset of the HBS, representative of São Paulo city, was used in our analysis in order to improve the quality of the comparison with actual intake data. The ratio of national supply to household availability of fruits and vegetables was 2.6 while the ratio of national supply to actual intake was 4.0. The discrepancy ratio in the comparison between household availability and actual intake was smaller, 1.6. While the use of supply and availability data has advantages, as lower cost, must be taken into account that these sources tend to overestimate actual intake of fruits and vegetables.
Resumo:
Revisar e sintetizar as evidências científicas disponíveis sobre a relação entre o consumo alimentar e dislipidemia em pacientes infectados pelo HIV em terapia antirretroviral combinada de alta atividade (TARV). Desenvolveu-se uma revisão sistemática de literatura. Foram pesquisados estudos originais e duas categorias de exposição dietética foram revisadas: consumo de energia e nutriente ou consumo de uma dieta teste. Foi feita síntese narrativa dos estudos selecionados. Os achados foram sintetizados segundo a categoria de desfecho metabólico (efeito sobre colesterol total e LDL-c, efeito sobre HDL-c e efeito sobre triglicérides). Vinte estudos originais foram incluídos na revisão, sendo 13 ensaios clínicos e 7 estudos epidemiológicos observacionais. A suplementação com ácido graxo ω-3 resultou em significativa redução nos níveis séricos de triglicérides. Observou-se evidência insuficiente acerca da efetividade de intervenções dietéticas na prevenção e controle das dislipidemias em pacientes infectados pelo HIV em uso de TARV.
Resumo:
The purpose of this study was to evaluate the possibility of producing circulatory arrest by occlusion of the pulmonary trunk as an alternative to the venous inflow occlusion through the left hemithorax. Eight healthy mongrel dogs were divided in two groups. Group I underwent 4 minutes of outflow occlusion and Group II was submitted to 8 minutes of circulatory arrest. Outflow occlusion was performed through left thoracotomy and pericardiotomy by passing a Rumel tourniquet around the pulmonary trunk. Physical examination, electrocardiography, echocardiography, blood gas analyses, hemodynamic, and oxygen transport variables were obtained before and after the procedure. The dogs from Group I did not have any clinical, electrocardiographic, echocardiographic, or hemo-dynamic abnormalities after anesthetic recover. In the Group II, only one dog survived, which had no clinical, electrocardiographic, or echocardiographic abnormalities. In this last dog, just after releasing the occlusion, it was detected increases in the following parameters: heart rate (HR), systolic, diastolic and mean arterial blood pressure (SAP; DAP; MAP), pulmonary artery pressure (PAP), pulmonary wedge pressure (PWP), central venous pressure (CVP), cardiac output (CO), systolic index (SI), cardiac index (CI), left and right ventricular stroke work (LVSW; RVSW), oxygen delivery index (DO2), oxygen consumption index (VO2), and oxygen extraction (O2 ext). Moreover, the oxygen content of arterial and mixed venous blood (CaO2; CvO2), and the arterial and mixed venous partial pressure of oxygen (PaO2; PvO2) were decreased 5 minutes after circulatory arrest. Outflow occlusion is a feasible surgical procedure for period of 4 minutes of circulatory arrest.
Resumo:
Descreve-se um surto de disenteria de inverno que afetou 10 vacas leiteiras de uma propriedade localizada em Viamão, Rio Grande do Sul. O quadro clínico caracterizou-se por uma diarréia inicialmente líquida esverdeada com estrias de sangue e muco, evoluindo, em alguns animais, para uma diarréia de coloração marrom escura à sanguinolenta, que persistiu, em média, cinco dias. Drástica diminuição na produção de leite e no consumo de alimentos, além de graus variados de depressão também foram observados. Apenas um dos 10 animais afetados morreu. Durante a necropsia, observaram-se mucosas pálidas, conteúdo sanguinolento com presença de grande quantidade de coágulos, principalmente no cólon espiral e petéquias na mucosa do cólon. Os principais achados histológicos foram encontradas no cólon espiral, onde havia criptas dilatadas, sem epitélio de revestimento ou revestidas por epitélio pavimentoso e/ou cuboidal, por vezes com núcleos grandes e nucléolos proeminentes. Algumas criptas eram preenchidas por debris necróticos e polimorfonucleares. Na imuno-histoquímica com anticorpo monoclonal para coronavírus bovino (8F2) em cortes do cólon espiral, havia marcações positivas no citoplasma de enterócitos das criptas, nos debris necróticos destas e em macrófagos na lâmina própria.
Resumo:
The bacterium Rickettsia rickettsii is the etiological agent of an acute, severe disease called Rocky Mountain spotted fever in the United States or Brazilian spotted fever (BSF) in Brazil. In addition to these two countries, the disease has also been reported to affect humans in Mexico, Costa Rica, Panama, Colombia and Argentina. Like humans, dogs are also susceptible to R. rickettsii infection. However, despite the wide distribution of R. rickettsii in the Western Hemisphere, reports of R. rickettsii-induced illness in dogs has been restricted to the United States. The present study evaluated the pathogenicity for dogs of a South American strain of R. rickettsii. Three groups of dogs were evaluated: group 1 (G1) was inoculated ip with R. rickettsii; group 2 (G2) was infested by R. rickettsii-infected ticks; and the control group (G3) was infested by uninfected ticks. During the study, no clinical abnormalities, Rickettsia DNA or R. rickettsii-reactive antibodies were detected in G3. In contrast, all G1 and G2 dogs developed signs of rickettsial infection, i.e., fever, lethargy, anorexia, ocular lesions, thrombocytopenia, anemia and detectable levels of Rickettsia DNA and R. rickettsii-reactive antibodies in their blood. Rickettsemia started 3-8 days after inoculation or tick infestation and lasted for 3-13 days. Our results indicate that a Brazilian strain of R. rickettsii is pathogenic for dogs, suggesting that canine clinical illness due to R. rickettsii has been unreported in Brazil and possibly in the other South American countries where BSF has been reported among humans.
Resumo:
Rabies is a viral zoonotic infectious disease that affects mammals and is caused by genotypes/species of the Lyssavirus genus (Rhabdoviridae, Mononegavirales), with the genotype 1 (classic rabies virus - RABV) being the most prevalent. Despite continuous efforts, rabies is still an incurable disease that causes thousands of deaths amongst humans worldwide. Due to a wide range of hosts and the different evolutionary paths of RABV in each host, several host-specific variants have arisen in an ongoing process. The result of RABV replication in nervous tissues may lead to two opposite clinical outcomes, i.e., paralytic/dumb form and encephalitic/furious one. The paralytic form creates dead-end hosts mainly amongst herbivores, while the furious form of the disease allows for augmented transmission when manifested in gregarious carnivores, as their natural aggressive behavior is accentuated by the disease itself. The aim of this article is to propose a theoretical model intended to explore how the rabies virus intrinsically modulates the immune system of different host classes, the pathological changes that the virus causes in these animals and how these elements favor its own perpetuation in nature, thus providing a basis for better prediction of the patterns this disease may present.
Resumo:
Realizou-se um estudo do tipo caso-controle de base hospitalar no Município de João Pessoa, Paraíba, Brasil. Participaram 183 indivíduos (89 casos e 94 controles) na faixa etária entre 30 e 80 anos, com pareamento por idade. O consumo alimentar de casos e controles foi avaliado por alimentos e grupos de alimentos categorizados em tercis de consumo. A estimativa dos valores da odds ratio (OR) e intervalos de confiança de 95% (IC95%) foi realizada por regressão logística múltipla não-condicional. O consumo de frutas e sucos, feijão e leite e derivados apresentou uma forte associação com a redução no risco de câncer de mama. O consumo de carnes vermelhas e de carnes fritas esteve positivamente associado ao risco de câncer de mama (carne vermelha - OR = 4.30; IC95%: 1,74-10,67; p = 0,00). Não foi observada associação entre o consumo dos grupos de vegetais e embutidos com o câncer de mama. Carne vermelha e carnes fritas podem ser fatores de risco, e o consumo de frutas, feijão e leite e derivados pode atuar como protetor do câncer de mama
Resumo:
study-specific results, their findings should be interpreted with caution
Resumo:
Nickel-based super alloys are used in a variety of applications in which high-temperature strength and resistance to creep, corrosion, and oxidation are required, such as in aircraft gas turbines, combustion chambers, and automotive engine valves. The properties that make these materials suitable for these applications also make them difficult to grind. Grinding systems for such materials are often built around vitrified cBN (cubic boron nitride) wheels to realize maximum productivity and minimum cost per part. Conditions that yield the most economical combination of stock removal rate and wheel wear are key to the successful implementation of the grinding system. Identifying the transition point for excessive wheel wear is important. The aim of this study is to compare the performance of different cBN wheels when grinding difficult-to-grind (DTG) materials by determining the 'wheel wear characteristic curve', which correlates the G-ratio to the calculated tangential force per abrasive grain. With the proposed methodology, a threshold force per grit above which the wheel wear rate increases rapidly can be quickly identified. A comparison of performance for two abrasive product formulations in the grinding of three materials is presented. The obtained results can be applied for the development of grinding applications for DTG materials.
Resumo:
In this work, the effects of indenter tip roundness oil the load-depth indentation curves were analyzed using finite element modeling. The tip roundness level was Studied based on the ratio between tip radius and maximum penetration depth (R/h(max)), which varied from 0.02 to 1. The proportional Curvature constant (C), the exponent of depth during loading (alpha), the initial unloading slope (S), the correction factor (beta), the level of piling-up or sinking-in (h(c)/h(max)), and the ratio h(max)/h(f) are shown to be strongly influenced by the ratio R/h(max). The hardness (H) was found to be independent of R/h(max) in the range studied. The Oliver and Pharr method was successful in following the variation of h(c)/h(max) with the ratio R/h(max) through the variation of S with the ratio R/h(max). However, this work confirmed the differences between the hardness values calculated using the Oliver-Pharr method and those obtained directly from finite element calculations; differences which derive from the error in area calculation that Occurs when given combinations of indented material properties are present. The ratio of plastic work to total work (W(p)/W(t)) was found to be independent of the ratio R/h(max), which demonstrates that the methods for the Calculation of mechanical properties based on the *indentation energy are potentially not Susceptible to errors caused by tip roundness.
Resumo:
In this work, the effects of conical indentation variables on the load-depth indentation curves were analyzed using finite element modeling and dimensional analysis. A factorial design 2(6) was used with the aim of quantifying the effects of the mechanical properties of the indented material and of the indenter geometry. Analysis was based on the input variables Y/E, R/h(max), n, theta, E, and h(max). The dimensional variables E and h(max) were used such that each value of dimensionless Y/E was obtained with two different values of E and each value of dimensionless R/h(max) was obtained with two different h(max) values. A set of dimensionless functions was defined to analyze the effect of the input variables: Pi(1) = P(1)/Eh(2), Pi(2) = h(c)/h, Pi(3) = H/Y, Pi(4) = S/Eh(max), Pi(6) = h(max)/h(f) and Pi(7) = W(P)/W(T). These six functions were found to depend only on the dimensionless variables studied (Y/E, R/h(max), n, theta). Another dimension less function, Pi(5) = beta, was not well defined for most of the dimensionless variables and the only variable that provided a significant effect on beta was theta. However, beta showed a strong dependence on the fraction of the data selected to fit the unloading curve, which means that beta is especially Susceptible to the error in the Calculation of the initial unloading slope.
Resumo:
Currently, the acoustic and nanoindentation techniques are two of the most used techniques for material elastic modulus measurement. In this article fundamental principles and limitations of both techniques are shown and discussed. Last advances in nanoindentation technique are also reviewed. An experimental study in ceramic, metallic, composite and single crystals was also done. Results shown that ultrasonic technique is capable to provide results in agreement with those reported in literature. However, ultrasonic technique does not allow measuring the elastic modulus of some small samples and single crystals. On the other hand, the nanoindentation technique estimates the elastic modulus values in reasonable agreement with those measured by acoustic methods, particularly in amorphous materials, while in some policristaline materials some deviation from expected values was obtained.
Resumo:
The aim of the present work is the presentation of a quantification methodology for the control of the amount of superparamagnetic iron oxide nanoparticles (SPIONs) administered in biological materials by means of the ferromagnetic resonance technique (FMR) applied to studies both in vivo and in vitro. The in vivo study consisted in the analysis of the elimination and biodistribution kinetics of SPIONs after intravenous administration in Wistar rats. The results were corroborated by X-ray fluorescence. For the in vitro study, a quantitative analysis of the concentration of SPIONs bound to the specific AC133 monoclonal antibodies was carried out in order to detect the expression of the antigenic epitopes (CD133) in stem cells from human umbilical cord blood. In both studies FMR has proven to be an efficient technique for the SPIONs quantification per volume unit (in vivo) or per labeled cell (in vitro).
Resumo:
The objective of this manuscript is to discuss the existing barriers for the dissemination of medical guidelines, and to present strategies that facilitate the adaptation of the recommendations into clinical practice. The literature shows that it usually takes several years until new scientific evidence is adopted in current practice, even when there is obvious impact in patients' morbidity and mortality. There are some examples where more than thirty years have elapsed since the first case reports about the use of a effective therapy were published until its utilization became routine. That is the case of fibrinolysis for the treatment of acute myocardial infarction. Some of the main barriers for the implementation of new recommendations are: the lack of knowledge of a new guideline, personal resistance to changes, uncertainty about the efficacy of the proposed recommendation, fear of potential side-effects, difficulties in remembering the recommendations, inexistence of institutional policies reinforcing the recommendation and even economical restrains. In order to overcome these barriers a strategy that involves a program with multiple tools is always the best. That must include the implementation of easy-to-use algorithms, continuous medical education materials and lectures, electronic or paper alerts, tools to facilitate evaluation and prescription, and periodic audits to show results to the practitioners involved in the process. It is also fundamental that the medical societies involved with the specific medical issue support the program for its scientific and ethical soundness. The creation of multidisciplinary committees in each institution and the inclusion of opinion leaders that have pro-active and lasting attitudes are the key-points for the program's success. In this manuscript we use as an example the implementation of a guideline for venous thromboembolism prophylaxis, but the concepts described here can be easily applied to any other guideline. Therefore, these concepts could be very useful for institutions and services that aim at quality improvement of patient care. Changes in current medical practice recommended by guidelines may take some time. However, if there is a broader participation of opinion leaders and the use of several tools listed here, they surely have a greater probability of reaching the main objectives: improvement in provided medical care and patient safety.
Resumo:
Background: Risperidone long-acting injection (RLAI) has been shown to be efficacious, improve compliance, and increase long-term retention rate on therapy. The aim of this work was to determine the effect of RLAI on clinical outcome and hospitalization rate in patients with schizophrenia or schizoaffective disorder enrolled in the electronic Schizophrenia Treatment Adherence Registry in Latin America. Methods: Data were collected at baseline, retrospectively for the 12 months prior to baseline, and prospectively every three months for 24 months. Hospitalization prior to therapy was assessed by a retrospective chart review. Efficacy and functioning were evaluated using Clinical Global Impression of Illness Severity (CGI-S), Personal and Social Performance (PSP), and Global Assessment of Functioning (GAF) scores. Relapse and treatment were also registered. Results: Patients were recruited in Mexico (n = 53), Brazil (n = 11), and Colombia (n = 15). Sixty-five percent (n = 52) were male, and mean age was 32.9 years. Patients were classified as having schizophrenia (n = 73) or schizoaffective disorder (n = 6). The mean dose of RLAI at six months was 34.1 mg (standard deviation = 10.2 mg). The percentage of hospitalized patients before treatment was 28.2% and 5.1% at six months after initiating RLAI (P < 0.001). Significant changes were registered on CGI-S, GAF, and PSP scores. Conclusions: RLAI was associated with an improvement in clinical symptoms and functioning, and a greater reduction in hospitalization.