Ages, sedimentation rates and geochemical composition of ODP Site 162-983 sediments

A geochemical study of sediments from Ocean Drilling Program Site 983 was conducted to examine low-frequency variations in carbonate content as expressed by blue-band reflectance (450-500 nm) over the last 1.2 Ma. Sedimentary percent organic carbon, percent carbonate, and excess barium (Ba[ex]) were used as the primary tools to evaluate the factors responsible for these long-term changes. We observe positive correlation between the mass-accumulation rate of various biogenic components and the mass-accumulation rate of Ba(ex), especially in sediments younger than ~600 ka. Deeper in the section (~600-1200 ka), the correlation between Ba(ex) and the other biogenic tracers is weak. The lack of correlation between Ba(ex) and biogenic carbonate likely results either from a higher supply of terrigenous material at that time (which confounds Ba[ex] estimation), or remobilization of Ba resulting from low pore-water sulfate ion concentrations, or both. Nonbiogenic sediments at Site 983, represented by Th, K2O, and the molar Ti/Al ratio, exhibit cyclic variations that represent mixing between continental and oceanic (i.e., basaltic) terrigenous sources. The timing of these cycles matches that of the major glacial-interglacial cycles, which suggests that they result from the supply of continental material as ice-rafted debris during glacial periods and fine-grained basaltic material by bottom currents during interglacial periods. Given these observations, the most likely causes for the low-frequency carbonate variations observed in the Site 983 sediments are shifts in surface productivity and, to a lesser extent, dilution by the input of terrigenous material.

Climatological observations from ship logbooks between 1750 and 1854 (release 2.1)

The Climatological Database for the World's Oceans: 1750-1854 (CLIWOC) project, which concluded in 2004, abstracted more than 280,000 daily weather observations from ships' logbooks from British, Dutch, French, and Spanish naval vessels engaged in imperial business in the eighteenth and nineteenth centuries. These data, now compiled into a database, provide valuable information for the reconstruction of oceanic wind field patterns for this key period that precedes the time in which anthropogenic influences on climate became evident. These reconstructions, in turn, provide evidence for such phenomena as the El Niño-Southern Oscillation and the North Atlantic Oscillation. Of equal importance is the finding that the CLIWOC database the first coordinated attempt to harness the scientific potential of this resource represents less than 10 percent of the volume of data currently known to reside in this important but hitherto neglected source.

Sharing analysis of arrays, collections, and recursive structures

Precise modeling of the program heap is fundamental for understanding the behavior of a program, and is thus of signiflcant interest for many optimization applications. One of the fundamental properties of the heap that can be used in a range of optimization techniques is the sharing relationships between the elements in an array or collection. If an analysis can determine that the memory locations pointed to by different entries of an array (or collection) are disjoint, then in many cases loops that traverse the array can be vectorized or transformed into a thread-parallel versión. This paper introduces several novel sharing properties over the concrete heap and corresponding abstractions to represent them. In conjunction with an existing shape analysis technique, these abstractions allow us to precisely resolve the sharing relations in a wide range of heap structures (arrays, collections, recursive data structures, composite heap structures) in a computationally efflcient manner. The effectiveness of the approach is evaluated on a set of challenge problems from the JOlden and SPECjvm98 suites. Sharing information obtained from the analysis is used to achieve substantial thread-level parallel speedups.

The ciao prolog system

Ciao is a public domain, next generation multi-paradigm programming environment with a unique set of features: Ciao offers a complete Prolog system, supporting ISO-Prolog, but its novel modular design allows both restricting and extending the language. As a result, it allows working with fully declarative subsets of Prolog and also to extend these subsets (or ISO-Prolog) both syntactically and semantically. Most importantly, these restrictions and extensions can be activated separately on each program module so that several extensions can coexist in the same application for different modules. Ciao also supports (through such extensions) programming with functions, higher-order (with predicate abstractions), constraints, and objects, as well as feature terms (records), persistence, several control rules (breadth-first search, iterative deepening, ...), concurrency (threads/engines), a good base for distributed execution (agents), and parallel execution. Libraries also support WWW programming, sockets, external interfaces (C, Java, TclTk, relational databases, etc.), etc. Ciao offers support for programming in the large with a robust module/object system, module-based separate/incremental compilation (automatically -no need for makefiles), an assertion language for declaring (optional) program properties (including types and modes, but also determinacy, non-failure, cost, etc.), automatic static inference and static/dynamic checking of such assertions, etc. Ciao also offers support for programming in the small producing small executables (including only those builtins used by the program) and support for writing scripts in Prolog. The Ciao programming environment includes a classical top-level and a rich emacs interface with an embeddable source-level debugger and a number of execution visualization tools. The Ciao compiler (which can be run outside the top level shell) generates several forms of architecture-independent and stand-alone executables, which run with speed, efficiency and executable size which are very competive with other commercial and academic Prolog/CLP systems. Library modules can be compiled into compact bytecode or C source files, and linked statically, dynamically, or autoloaded. The novel modular design of Ciao enables, in addition to modular program development, effective global program analysis and static debugging and optimization via source to source program transformation. These tasks are performed by the Ciao preprocessor ( ciaopp, distributed separately). The Ciao programming environment also includes lpdoc, an automatic documentation generator for LP/CLP programs. It processes Prolog files adorned with (Ciao) assertions and machine-readable comments and generates manuals in many formats including postscript, pdf, texinfo, info, HTML, man, etc. , as well as on-line help, ascii README files, entries for indices of manuals (info, WWW, ...), and maintains WWW distribution sites.

ICTD Work, Plus mFeel : improving communication in resource-poor settings

This issue's Works-In-Progress department has four entries related to the issue's theme, Information and Communication Technologies for Development (ICTD). They are “Sustainable ICT in Agricultural Value Chains”, “Measuring Social Inclusion in Primary Schools”, “An Architecture for Green Mobile Computation”, and “Improving Communication in Resource-Poor Settings”. A fifth entry, “mFeel: An Affective Mobile System”, covers the mFeel mobile system, which combines context awareness with affective and cognitive techniques.

Manual eclesiastico de las ceremonias de la Iglesia : disertacion sobre la rubrica IV del misal romano, de las misas votivas, privadas, cantadas y solemnes

Autor consta en el prólogo

Manual eclesiastico de las ceremonias de la Iglesia : disertacion sobre las rubricas V y XIII del Misal Romano de las misas de requiem

Autor consta en el pról. de: Manual eclesiastico de las ceremonias de la Iglesia : disertacion sobre la rubrica IV del misal romano ... junto a la que está encuadernada esta obra

Sistemas de Gestión de la Calidad. Metodología para implementar proyectos de mejora continua para la reducción de los defectos de construcción en edificación de viviendas

La mejora continua debería estar presente siempre en las empresas, dispongan o no de sistemas de gestión. Sin embargo, su aplicación en el sector de la construcción es especialmente difícil debido a las características particulares del mismo. Por este motivo se plantea el objetivo principal de esta Tesis Doctoral: “Establecer una metodología de trabajo que permita a las empresas constructoras implantar proyectos de mejora continua para incrementar la calidad de las viviendas entregadas a los usuarios”. En la investigación llevada a cabo se han inspeccionado 818 viviendas, recogiendo un total de 82.550 incidencias, las cuales se han analizado aplicando cuatro de las siete herramientas estadísticas básicas de la mejora continua (Hoja de recogida de datos, Estratificación, Histograma y Diagrama de Pareto), concluyendo que los tres oficios que concentran el 80% de los defectos, en los que convendría actuar para reducir de manera significativa los fallos de construcción en la fase de pre-entrega, son: Carpintería de Madera, Revestimientos Cerámicos e Instalación de Electricidad. De entre estos tres oficios se ha seleccionado el de Revestimientos Cerámicos para poner en práctica un proyecto de mejora continua. Analizando los datos relativos a este oficio se elabora un listado de 25 defectos tipo en los que se pueden agrupar todas las incidencias detectadas. Aplicando de nuevo las cuatro herramientas básicas de la calidad se destacan los 10 defectos tipo con mayor impacto en volumen de incidencias y en coste de reparación, para focalizar los esfuerzos de mejora. Con esta información se elabora un documento de criterios técnicos para la ejecución de los Revestimientos Cerámicos que se implanta, en parte, en varias obras para tratar de reducir los defectos detectados en las viviendas antes de la entrega a sus propietarios, y se definen unos Índices de Calidad para medir los resultados. Se toman datos de nuevo a 6 y 20 meses desde la implantación del protocolo, se analizan y se calculan los resultados del proyecto de mejora, concluyendo que se está avanzando positivamente. En base a toda la información recogida a lo largo del proceso de la investigación y de la experiencia del proyecto de mejora implantado, se presenta una propuesta de metodología para implementar proyectos de mejora, así como la documentación recomendada para su puesta en práctica, además de la documentación técnica específica para la prevención de los defectos de construcción en Revestimientos Cerámicos incluyendo las fichas de control para la recepción de materiales, control de ejecución y control de recepción del revestimiento terminado. ABSTRACT Continuous improvement should always be a core value in firms of all kinds, whether or not they implement management systems. Nevertheless, its application in the construction sector seems especially difficult due to its inherent intricacies and complexity. The study of this phenomenon is the main aim of the hereby presented PhD dissertation "Establishment of a working methodology that allows construction (related) firms to carry out projects of continuous improvement in order to increase the quality of housing upon delivery to the client". In the present research 818 housing units have been inspected, collecting a total of 82550 incidence entries, which have been analyzed by means of 4 out of the 7 basic statistical tools of continuous improvement: Data collection sheets, stratification, histogram, and Pareto diagram. The data shows that the 3 main trades where special actions should be taken in order to significantly reduce construction defects are: carpentry, ceramic cladding, and electricity systems. These trades combined account for the 80% of the total defects detected during the inspections. Among the mentioned works, ceramic tiling is selected as a continuous improvement case study project. Analysing data relative to this specific trade, a list of 25 defect types is developed. These types gather all detected defects under this group. Further applying the four statistical tools referred to above, the 10 most significant events are highlighted as to clearly determine the improvement measures. These events have the most impact on both volume of defects and reparation costs. This information is then put together in a document of technical criteria for the correct execution of ceramic tiling that is implemented in various ongoing projects under construction as to minimize the defects prior to the final delivery to the client. Also, a series of Quality Index are defined as criteria for execution suitability. 6 to 20 months after the implementation of this control protocol, the same process is repeated with the purpose of comparing results. It is concluded that a positive evolution takes place. Based both on the information collected throughout the research process and the experience of the case study, the dissertation proposes a methodology to successfully implement improvement projects along with reference documentation and specific technical documents for the prevention of construction defects in ceramic tiling, including (i) material reception control sheets, (ii) an execution control sheet, and a sheet relative to the (iii) control of the finished cladding.

Fast human pose estimation using 3D Zernike descriptors

Markerless video-based human pose estimation algorithms face a high-dimensional problem that is frequently broken down into several lower-dimensional ones by estimating the pose of each limb separately. However, in order to do so they need to reliably locate the torso, for which they typically rely on time coherence and tracking algorithms. Their losing track usually results in catastrophic failure of the process, requiring human intervention and thus precluding their usage in real-time applications. We propose a very fast rough pose estimation scheme based on global shape descriptors built on 3D Zernike moments. Using an articulated model that we configure in many poses, a large database of descriptor/pose pairs can be computed off-line. Thus, the only steps that must be done on-line are the extraction of the descriptors for each input volume and a search against the database to get the most likely poses. While the result of such process is not a fine pose estimation, it can be useful to help more sophisticated algorithms to regain track or make more educated guesses when creating new particles in particle-filter-based tracking schemes. We have achieved a performance of about ten fps on a single computer using a database of about one million entries.

Lexical phrases in telecommunication blogs: a genre analysis

The study presented in this paper aims to provide a description of telecommunication blogs as a genre. Lexical phrases are analysed in order to reach conclusions regarding the nature of the language in these texts and the extent to which the results obtained are comparable with other written or conversational discourse types. Although the departing hypothesis is that the articles in blogs are basically transactional and their main objective is to transfer information, the conclusions point to interaction as a distinctive characteristic of this type of discourse and also to a more careful organization in the comments to the blogs entries than originally expected. RESUMEN. Este trabajo presenta una descripción de los blogs de Telecomunicación como género. A través del análisis de frases léxicas se llega a conclusiones sobre algunas de las características que definen la lengua que se usa en este tipo de textos y se comparan los resultados obtenidos con otros previos sobre el discurso escrito y el conversacional. Aunque la hipótesis de partida es que los artículos de los blogs son básicamente transaccionales, donde el principal objetivo es transmitir información, los resultados llevan a conclusiones sobre la importancia de la interacción en este tipo de discurso y también apuntan a una mayor organización de la esperable en las entradas de los comentarios al artículo principal del blog.

Modelo para la gestión de la ordenación territorial en el Ecuador en el marco de su Constitución

Ecuador, país sudamericano, aprobó en el año 2008 una Constitución en la que subyace un modelo de desarrollo humano multidimensional y alternativo al vigente. Sus dimensiones sociales, económicas, políticas, culturales y ambientales se encuentran en los textos correspondientes a los “Derechos”, “Régimen de Desarrollo” y “Régimen del Buen Vivir”; en tanto que las dimensiones territoriales se hallan expuestas en la “Organización Territorial del Estado”, conformada por regiones, provincias, cantones y parroquias rurales, con sus respectivos gobiernos autónomos descentralizados, a los que la misma Constitución les atribuye, entre otras, las competencias exclusivas de “planificar el desarrollo” y “formular los correspondientes planes de ordenamiento territorial”, y al Estado central la “planificación nacional”. No obstante, el marco legal dictado posteriormente -que otorga al Estado central la competencia de ordenación territorial, mediante la “Estrategia Territorial Nacional”-, no logra regular con eficacia, efectividad y eficiencia este ejercicio competencial, incluyendo en esta condición a los lineamientos técnicos dictados por el organismo nacional de planificación; volviendo urgente la vigencia de una ley que lo asuma, pero que demanda previamente el diseño de un modelo de gestión de estas competencias, propósito al cual procura contribuir el presente trabajo. Su estructura es la siguiente: Capítulo 1: “La problemática, objetivos y antecedentes”, en cuya formulación se destaca el estudio del marco jurídico y técnico vigente en relación a la ordenación territorial, partiendo de una breve visión sobre los empeños previos en Ecuador por adoptarla, y que se complementa con una evaluación preliminar de la experiencia vivida por los gobiernos autónomos descentralizados al formular y gestionar sus primeros planes de desarrollo y de ordenación territorial, en acatamiento del mandato constitucional. Luego se avanza en la definición del objetivo general del trabajo y de un conjunto coherente de objetivos específicos. Concluye este capítulo con el análisis del estado de la cuestión: los antecedentes sobre la ordenación territorial en América Latina, en el marco de sus predecesoras históricas. Capítulo 2: “Diseño del modelo de gestión”, que se inicia con el planteamiento de la metodología a seguir, condicionada especialmente por los propios textos constitucionales que vinculan en la relación de “correspondencia” a la ordenación territorial con la planificación del desarrollo y en consecuencia con el ejercicio de las competencias sectoriales asignadas por ella misma a los diferentes niveles de gobierno. Efectivamente, tal relación supone básicamente que la planificación del desarrollo adquiera el carácter de global, total, vale decir integral, en el sentido de que igualmente contemple sus dimensiones territoriales y que la planificación de éstas se integre a la de las dimensiones sociales, económicas, políticas, culturales y ambientales, de manera tal que en cada uno de los niveles la planificación del desarrollo sea un proceso único y un todo. Por estas condiciones, el diseño en cuestión demanda el tratamiento previo de los aspectos contemplados por la metodología en relación con la conceptualización y ordenamiento de la planificación y gestión del modelo de desarrollo humano previsto por la Constitución para los distintos niveles territoriales, seguido del análisis y evaluación del reparto competencial. En este marco se diseña el modelo de gestión en siete componentes específicos que definen los objetivos estratégicos generales a los cuales apuntará la ordenación territorial, estructuran con sus figuras –los planes–, un sistema integrado de alcance nacional, entienden al propio territorio bajo una visión sistémica y proponen un esquema metodológico general para la redacción de tales instrumentos. Luego se aborda en calidad de tema clave, la articulación con la planificación del desarrollo, el establecimiento de las dimensiones territoriales sectoriales y globales de ordenación en cada nivel territorial, que posibilita a su vez la formulación de los contenidos de las determinaciones de los planes y la definición de un conjunto de lineamientos para su gestión. Capítulo 3. “Verificación”, que se ha concretado en la puesta a consideración de un selecto grupo de expertos nacionales en ordenación territorial, el modelo propuesto siguiendo los procedimientos recomendados para este tipo de consultas. Capítulo 4. “Conclusiones Generales”, esto es, un conjunto coherente de proposiciones que condensan los resultados alcanzados en los diferentes capítulos precedentes y que demuestran la validez del modelo propuesto. ABSTRACT Ecuador approved a constitution, by 2008, where a multidimensional human development model, different to the one in force, underlies. Its social, economic, political, cultural and environmental dimensions are at the entries for "Rights", "Development Scheme" and "Rules of Good Living"; while the territorial dimensions are given by the "Territorial Organization of the State" section, consisting of regions, provinces, cantons and rural parishes, with their respective autonomous governments, to which the Constitution conferred, inter alia, the exclusive powers of "development planning" and "land use plan formulation," while the central state has the "national planning" competence. However, the subsequent issued legal framework - which gives the central state competences over land planning, using the "National Spatial Strategy" - fails to effectively regulate this exercise of jurisdiction, including in this condition the technical guidelines dictated by the national planning agency; thus becoming urgent to put in force a law that assume it, which demands the previous design of a management model of these competences, which is the aim that seeks to contribute the present work. Its structure is as follows: Chapter 1: "The problem, objectives and background" that includes the study of the legal and technical framework in force in relation to land planning, starts with a brief overview of previous efforts to adopt it in Ecuador. The chapter is complemented with a preliminary assessment of the experience of the autonomous governments to formulate and manage their early development plans and land planning, in compliance with the constitutional mandate. Subsequently the overall objective of the work and a coherent set of objectives are defined. This chapter concludes with an analysis of the state of art: the history of land use planning in Latin America in the context of their historical predecessors. Chapter 2, "Design of a management model", which begins with the methodological approach to follow, conditioned by the constitutional texts linking the relationship of "correspondence" land planning with development planning and with the exercise of the sectorial competences assigned by itself to different levels of government. Indeed, such a relationship basically means that development planning should acquire a global, comprehensive, complete, total, character in the sense that it also provides for their territorial dimensions and that their planning is integrated to social, economic, political, cultural and environmental factors, so that in each of the levels, development planning is a unique process and a whole. For these conditions, the design in question demands pretreatment of the aspects covered by the methodology in relation to the conceptualization and management of the planning and management of human development model envisaged by the Constitution to the various territorial levels, followed by analysis and evaluation of the distribution of powers. In this framework a management model is designed into seven specific components that define the overall strategic objectives which aim to land planning, structure plans, and an integrated nationwide system, that understand the territory under a systemic vision and propose a general methodological framework to draft these instruments. Then a key issue is addressed, the coordination with development planning, the establishment of sectorial and regional and global dimensions of management at each territorial level, which in turn allows the formulation of the contents of the plans determinations and defining a set of management guidelines. Chapter 3, "Verification", It has traduced into asking for the revision of the proposed model by a select group of national experts in spatial planning by following recommended procedures for such queries. Chapter 4, "General Conclusions", a coherent set of propositions that summarize the results obtained in the different preceding chapters, which demonstrates the validity of the proposed model.