Projeto de um sistema de conversor multinível para painéis fotovoltaicos

A produção de energia elétrica a partir de fontes de energia renovável está gradualmente a ser uma alternativa à energia produzida a partir de combustíveis fósseis. A técnica de conversão dessas mesmas energias para energia elétrica, para entrega na Rede de Energia Elétrica (REE), é cada vez mais estudada para que se obtenha uma maior eficiência assim como qualidade. Neste trabalho desenvolve-se um projeto de conversão de energia fotovoltaica, para produção de energia elétrica para a rede utilizando um conversor multinível, otimizando a transferência de potência assim como melhorando a forma da corrente AC. A conversão multinível é uma topologia que tem algumas vantagens relativamente à topologia de 2 níveis, permitindo trabalhar com níveis de tensão mais elevados, melhorando a qualidade de energia. O conversor multinível de díodos ligados ao ponto neutro utiliza condensadores para criar os níveis de tensão, que neste trabalho vão ser usados para ligar os painéis, otimizando a transferência de potência. Aplica-se um método de controlo das correntes AC para terem a forma a alternada e sinusoidal e em fase com a tensão da rede. Os resultados experimentais mostram que a utilização do algoritmo de procura do ponto de máxima potência dos painéis permitem a extrair a máxima potência, de acordo com as condições de irradiação solar e temperatura dos painéis.

Low generation triazine-based dendrimers-synthesis, characterzation and in vitro biological activity

In the present study, two low generation triazine-based dendrimers, G1.0(Cl)4 dendrimer and G1.5(OH)8 dendrimer, were synthesized and their cytotoxicity were tested by using the NIH 3T3 and the A2780 cell lines. In the synthesis process of the G1.0(Cl)4 dendrimer, cyanuric chloride (CAC) which has high reactivity chlorine atom was connected to the terminal of triethylene glycol (TEG) via nucleophilic substitution by controlling temperature. The prepared G1.0(Cl)4 dendrimer was purified by silica gel column chromatography. Then the four chlorine atoms in the G1.0(Cl)4 dendrimer were substituted by diethanolamine (DEA) to give dendrimer with the hydroxyl terminal group G1.5(OH)8. The starting materials, CAC, G1.0(Cl)4 dendrimer and G1.5(OH)8 dendrimer were analyzed by one-dimensional NMR, FTIR and MS techniques. The two dendrimers, G1.0(Cl)4 and G1.5(OH)8, showed perfect stability in the air environment at room temperature. However, G1.0(Cl)4 is not soluble in water while the G1.5(OH)8 dendrimer is a water soluble compound. Furthermore, cell biological evaluation at the studied concentrations showed that the CAC, as well as the prepared G1.0(Cl)4 and G1.5(OH)8 dendrimers, have no cytotoxicity towards the NIH 3T3 and A2780 cell lines.

Controlo de estufagem do Vinho Madeira em escala piloto

Um dos processos de envelhecimento do Vinho Madeira é a “Estufagem” realizada através da circulação de água aquecida a uma determinada temperatura por um sistema de serpentina existente no interior de cada estufa. De modo a tornar o processo de estufagem eficiente e preservar a qualidade do Vinho Madeira, a monitorização, registo e controlo da temperatura reveste-se da maior importância sendo, atualmente, todo esse processo realizado, por norma, manualmente, quer no sistema de dez estufas de aço inox existente no laboratório de enologia da Universidade da Madeira (UMa), quer nos sistemas das cooperativas de Vinho Madeira. Existem, no mercado, alguns sistemas que solucionam, com menor ou maior limitação, este problema. Porém, nenhum desses sistemas implementa um sistema de controlo “inteligente” capaz de se adaptar automaticamente a diferentes períodos de temperaturas predefinidos e manter o aquecimento das estufas de acordo com essas temperaturas com uma margem de erro inferior a ±0,5℃, bem como o custo associado aos mesmos é elevado o que dificulta a sua implementação neste setor. O sistema implementado, nesta tese, consiste em duas aplicações: uma aplicação web e uma Windows Forms Application. A aplicação web foi desenvolvida em C# com recurso à framework ASP.NET Web Pages e implementa toda a lógica necessária à monitorização gráfica e à gestão do sistema, nomeadamente a definição do setpoint para cada estufa. A Windows Forms Application, também desenvolvida em C# devido à necessidade de interligação com a biblioteca fornecida pela CAREL para conexão aos controladores de temperatura IR32, efetua o registo e controlo automático da temperatura, de acordo com o setpoint definido para cada estufa através da aplicação web. O controlo de temperatura realiza-se com recurso às redes neuronais, nomeadamente através dum controlador DIC (Direct Inverse Controller) que obteve, de entre os vários controladores testados, o melhor Erro Quadrático Médio (MSE) e o melhor Coeficiente de Correlação (R). Através da utilização do sistema implementado conseguiu-se eliminar a limitação física de erro com ± 1℃ em torno do setpoint tendo-se conseguido, para o melhor caso, uma margem de erro de ± 0,1℃ relativamente ao setpoint reduzindo-se, assim, a margem de variação de temperatura até um máximo de 1,8ºC e, consequentemente, o erro associado.

Painéis compósitos de betão leve: comportamento estrutural

Os sucessivos avanços tecnológicos permitem a criação de novos materiais de construção com características otimizadas ao uso que lhes é designado. Nesta categoria enquadram-se os materiais compósitos e mais concretamente os painéis compósitos de betão aligeirado de EPS com revestimento superficial de placas Megapan® estudados neste documento. Neste documento faz-se uma abordagem aos conceitos de material compósito e uma breve análise histórica do seu uso. Descreve-se também sucintamente as características gerais dos painéis em estudo e exemplifica-se algumas aplicações do material até à presente data. São analisados testes de resistência efetuados ao material estudado e efetua-se a caracterização mecânica do mesmo. Verifica-se neste estudo que os painéis de betão aligeirado de EPS com revestimento superficial de placas Megapan® possuem resistências mecânicas que permitem a sua utilização como parte integrante de um sistema estrutural. Sugere-se uma solução construtiva para uma estrutura que utilize os painéis estudados como elemento estrutural e os respetivos pormenores construtivos. É também sugerida uma metodologia de cálculo para dimensionar a estrutura analisada.

Obtenção de organovermiculitas utilizando tensoativos e microemulsões e suas aplicações na separação de isômeros do Xileno

Surfactants are versatile organic compounds that have, in a single molecule, double chemical affinity. The surfactant molecule is composed by a hy drophobic tail group, a hydrocarbon chain (linear, branched, or mixed), and by a hydrophilic head group, which contains polar groups that makes it able to be applied in the organophilization process of natural clays. Microemulsions are microheterogeneous b lends composed by: a surfactant, an oily phase (non - polar solvent), an aqueous phase, and, sometimes, a co - surfactant (short - chain alcohol). They are systems with thermodynamic stability, transparent, and have high solubility power. Vermiculite is a clay m ineral with an expandable crystalline structure that has high cation exchange capacity. In this work vermiculite was used to obtain organoclays. The ionic surfactants dodecyl ammonium chlori de (DDAC) and cetyltrimethylammonium bromide (C 16 TAB) were used in the organophilization process. They were used as surfactant aqueous solutions and, for DDAC, as a microemulsion system. The organoclays were used to promote the separation of binary mixtures of xylene isomers (ortho - and meta - xylene). Dif ferent analytical techniques were used to characterize microemulsion systems and also the nanoclays. It was produced a water - rich microemulsion system with 0.92 nm droplet average diameter. The vermiculite used in this work has a cationic exchange capacity of 172 meq/100g and magnesium as main cation (24.25%). The basal spacing of natural vermiculite and organo - vermiculites were obtained by X - ray Diffraction technique. The basal spacing was 1.48nm for natural vermiculite, 4.01nm for CTAB - vermiculite (CTAB 4 ) , and 3.03nm for DDAC - vermiculite (DDAC M1A), that proves the intercalation process. Separation tests were carried out in glass columns using three binary mixtures of xylene (ortho - xylene and meta - xylene). The results showed that the organovermiculite pre sented an enhanced chemical affinity by the mixture of hydrocarbons, when compared with the natural vermiculite, and also its preference by ortho - xylene. A factorial experimental design 2 2 with triplicate at the central point was used to optimize the xylen e separation process. The experimental design revealed that the initial concentration of isomers in the mixture and the mass of organovermiculite were the significant factors for an improved separation of isomers. In the experiments carried out using a bin ary mixture of ortho - xylene and meta - xylene (2:1), after its percolating through the organovermiculite bed (DDAC M1), it was observed the preference of the organoclay by the ortho - xylene isomer, which was retained in greater quantity than the meta - xylene o ne. At the end of the treatment, it was obtained a final concentration in meta - xylene of 47.52%.

Espessura da zona de transição do manto sob a Província Borborema, NE Brasil, através de conversões Ps telessísmicas

The mantle transition zone is defined by two seismic discontinuities, nominally at 410 and 660 km depth, which result from transformations in the mineral olivine. The topography of these discontinuities provides information about lateral temperature changes in the transition zone. In this work, P-to-S conversions from teleseismic events recorded at 32 broadband stations in the Borborema Province were used to determine the transition zone thickness beneath this region and to investigate whether there are lateral temperature changes within this depth range. For this analysis, stacking and migration of receiver functions was performed. In the Borborema Province, geophysical studies have revealed a geoid anomaly which could reflect the presence of a thermal anomaly related to the origin of intraplate volcanism and uplift that marked the evolution of the Province in the Cenozoic. Several models have been proposed to explain these phenomena, which include those invoking the presence of a deep-seated mantle plume and those invoking shallower sources, such as small-scale convection cells. The results of this work show that no thermal anomalies are present at transition zone depths, as significant variations in the transition zone thickness were not observed. However, regions of depressed topography for both discontinuities (410 and 660 km) that approximately overlap in space were identified, suggesting that lower-thanaverage, lateral variations in seismic velocity above 410 km depth may exist below the the Borborema Province. This is consistent with the presence of a thermally-induced, low-density body independently inferred from analysis of geoid anomalies. Therefore, the magma source responsible for the Cenozoic intraplate volcanism and related uplift in the Province, is likely to be confined above the upper mantle transition zone.

Síntese e caracterização de niobiosilicatos para produção de biocombustível

The mesoporous materials has been an special attention, among them was discovered in the 1990´s the mesoporous molecular sieve of SBA-15 type. The good features of the SBA- 15 makes this material very promising in catalysis, however, due to the absence of native active sites, it has low catalytic activity. In this way, different metals and oxides have been included in this molecular sieve as a means of introducing active sites and increase its catalytic activity. Among the oxides that are being researched, there is the niobium oxide, which presents strong acid sites and exists in abundance. Brazil is the largest producer of the mineral. On the other hand, the production of biofuels has been desired, but it requires the development of new catalysts for this purpose. The aim of this work was to develop silicate of niobium by impregnation and by new synthesis method for application in the cracking of moringa oil. The methodology consisted of inserting the niobium oxide either by postsynthesis process using wet impregnation and direct insertion. For direct insert a new method was developed for pH adjustment, being tested different pH, and the pH 2.2 was used different ratios of Si/Nb. The materials were characterized by different techniques such as: XRD, N2 adsorption, SEM, EDS, UV-visible, TG/DTG, DSC, TEM, acidity by thermodesorption of n-butilamine and FTIR. After this part of the catalysts developed by the two methods were tested in the thermocatalytic cracking of moringa oil, being used a simple distillation. All silicates of Niobium obtained showed a highly ordered structure, having high specific areas, good distribution of pore diameters, beyond present a morphology in the form of fibers. In the catalysts after synthesis was observed that the niobium inserted has so as octahedrally and tetrahedrally coordinated, demonstrating that there were also oxides formed on the external surface of SBA-15. The materials obtained in the direct synthesis are only tetrahedrally coordinated. The new synthesis method of pH adjusting by using the buffer solution for it, proved to be very efficient for the production of such materials, because the materials obtained showed characteristics and structures similar to the molecular sieve of SBA-15 type. Among the pH tested the material that presented better characteristics was synthesized at pH 2.2. The application of these materials in catalytic cracking showed a higher formation of organic liquids when compared to thermal cracking, in addition to significantly reducing the acidity and residues formed, demonstrating that the use of silicates of Niobium increases both the conversion and the selectivity of the products.

Síntese e caracterização estrutural, magnética e térmica da hidroxiapatita dopada com ferro

In this work, composites were prepared using high energy mechanical milling from the precursors hydroxyapatite - HAp (Ca10(PO4)6(OH)2) and metallic iron ( -Fe ). The main goal here is to study composites in order to employ them in magnetic hyperthermia for cancer therapy. The produced samples were characterized by X-ray di raction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), magnetization curves as a function of applied eld (MxH), and nally measurements of magnetic hyperthermia. The XRD patterns of the milled samples HAp/Fe revealed only the presence of precursor materials. The SEM showed clusters with irregular shapes. The magnetization curves indicated typical cases of weak ferromagnetic behavior. For samples submitted to grinding and annealing, the identi ed phases were: HAp (Ca10(PO4)6(OH)2), hematite (Fe2O3) and Calcium Iron Phosphate (Ca9Fe(PO4)7). Analyzing the results of MxH, there was a reduction of the saturation magnetization, given that the Fe was incorporated into HAp. Hysteresis curves obtained at 300 K are characteristics of samples possessing over a phase. At 77 K, the behavior of the hysteresis curve is in uenced by the presence of hematite, which is antiferromagnetic. Already at T = 4.2 K, it is observed a weak ferromagnetic behavior. Furthermore, there is the e ect of exchange bias. Regarding the magnetic hyperthermia, the results of temperature measurements as a function of the alternating eld are promising for applications in magnetic hyperthermia and other biomedical applications.

Konect: framework de desenvolvimento para aplicações do Microsoft Kinect

O desenvolvimento para a plataforma Microsoft Kinect (ou simplesmente Kinect) vem se intensificando à medida que o hardware apresenta-se constantemente como parte integrante de soluções para problemas importantes nas áreas de Computação Médica, Realidade Virtual ou mesmo seu propósito básico inicial: a indústria de Entretenimento. Com a sua popularização, as ferramentas básicas de desenvolvimento oferecidas pela Microsoft têm apresentado ao público geral complicações que poderiam ser evitadas, como a correta configuração e inicialização dos recursos oferecidos pelo hardware. Assim, este trabalho tem como objetivo desenvolver e avaliar um framework específico para a plataforma Kinect, que auxilie usuários que estão começando a desenvolver aplicações para essa plataforma, apresentando os principais componentes e como eles foram testados e avaliados pelos usuários. Este trabalho também apresenta uma pesquisa realizada com os jogos mais vendidos e melhores avaliados do Kinect, visando extrarir os principais componentes neles presentes para formar a estrutura do framework.

Análise sintagmática aplicada ao processo de sumarização automática de documentos do português brasileiro

This research studies the application of syntagmatic analysis of written texts in the language of Brazilian Portuguese as a methodology for the automatic creation of extractive summaries. The automation of abstracts, while linked to the area of natural language processing (PLN) is studying ways the computer can autonomously construct summaries of texts. For this we use as presupposed the idea that switch to the computer the way a language is structured, in our case the Brazilian Portuguese, it will help in the discovery of the most relevant sentences, and consequently build extractive summaries with higher informativeness. In this study, we propose the definition of a summarization method that automatically perform the syntagmatic analysis of texts and through them, to build an automatic summary. The phrases that make up the syntactic structures are then used to analyze the sentences of the text, so the count of these elements determines whether or not a sentence will compose the summary to be generated

Estudo da participação das espécies fortemente oxidantes produzidas durante a oxidação eletroquímica de corantes usando eletrodo de diamante dopado com boro: função das propriedades eletroquímicas do eletrodo e condições experimentais

The textile industry is one of the most polluting in the world (AHMEDCHEKKAT et al. 2011), generating wastewater with high organic loading. Among the pollutants present in these effluents are dyes, substances with complex structures, toxic and carcinogenic characteristics, besides having a strong staining. Improper disposal of these substances to the environment, without performing a pre-treatment can cause major environmental impacts. The objective this thesis to use a technique of electrochemical oxidation of boron doped diamond anode, BDD, for the treatment of a synthetic dye and a textile real effluent. In addition to studying the behavior of different electrolytes (HClO4, H3PO4, NaCl and Na2SO4) and current densities (15, 60, 90 and 120 mA.cm-2 ), and compare the methods with Rhodamine B (RhB) photolysis, electrolysis and photoelectrocatalytic using H3PO4 and Na2SO4. Electrochemical oxidation studies were performed in different ratio sp3 /sp2 of BDD with solution of RhB. To achieve these objectives, analysis of pH, conductivity, UV-visible, TOC, HPLC and GC-MS were developed. Based on the results with the Rhodamine B, it was observed that in all cases occurred at mineralization, independent of electrolyte and current density, but these parameters affect the speed and efficiency of mineralization. The radiation of light was favorable during the electrolysis of RhB with phosphate and sulfate. Regarding the oxidation in BDD anode with different ratio sp3 /sp2 (165, 176, 206, 220, 262 e 329), with lower carbon-sp3 had a longer favoring the electrochemical conversion of RhB, instead of combustion. The greater the carbon content on the anodes BDD took the biggest favor of direct electrochemical oxidation

Fluidos de perfuração aquosos: a contribuição da goma xantana e carboximetilcelulose no controle de filtrado

This study aimed mainly to evaluate the influence of xanthan gum (XG) and carboxymethylcellulose (CMC) in the filtration process of water-based drilling fluids, considering the conformational changes suffered by the polyelectrolyte with the addition of sodium chloride (NaCl) in different concentrations (0.17, 0.34 and 0.51 mol.L-1). It was also evaluated the behavior of the fluid by the addition of calcium carbonate (CaCO3) in pure water and in brine. Seeking a better understanding of the interaction between the polymers used and CaCO3, polymer adsorption analyzes were performed using a depletion method, which yielded a higher percentage of adsorption of Xanthan Gum in this material (29%), which can justify the formation of a thin and waterproof filter cake for drilling fluids containing this polymer. However, the best values of apparent viscosity (20 and 24 mPa.s) and volume of filtrate (8.0 and 8.1 mL) were obtained for the systems consisting of xanthan gum, CMC and CaCO3, in NaCl aqueous solutions concentrations of 0.34 and 0.51 mol.L-1, respectively. The values can be related to the presence of CMC that increases the apparent viscosity and reduces the volume of filtrate. In addition, the CaCO3 added acts as a bridging agent, promoting the formation of a less permeable filter cake

Desenvolvimento de pastas cimentantes contendo nanossílica como material estendedor para aplicação em fases iniciais, de poços petrolíferos, submetidas à baixa temperatura (5°c ± 3ºc)

The improved performance of hydraulic binders, the base of Portland cement, consists in the careful selection and application of materials that promote greater durability and reduced maintenance costs There is a wide variety of chemical additives used in Portland cement slurries for cementing oil wells. These are designed to work in temperatures below 0 ° C (frozen areas of land) to 300 ° C (thermal recovery wells and geothermal); pressure ranges near ambient pressure (in shallow wells) to greater than 200 MPa (in deep wells). Thus, additives make possible the adaptation of the cement slurries for application under various conditions. Among the materials used in Portland cement slurry, for oil wells, the materials with nanometer scale have been applied with good results. The nanossílica, formed by a dispersion of SiO2 particles, in the nanometer scale, when used in cement systems improves the plastic characteristics and mechanical properties of the hardened material. This dispersion is used commercially as filler material, modifier of rheological properties and / or in recovery processes construction. It is also used in many product formulations such as paints, plastics, synthetic rubbers, adhesives, sealants and insulating materials Based on the above, this study aims to evaluate the performance of nanossílica as extender additive and improver of the performance of cement slurries subjected to low temperatures (5 ° C ± 3 ° C) for application to early stages of marine oil wells. Cement slurries were formulated, with densities 11.0;12.0 and 13.0 ppg, and concentrations of 0; 0.5, 1.0 and 1.5%. The cement slurries were subjected to cold temperatures (5 ° C ± 3 ° C), and its evaluation performed by tests rheological stability, free water and compressive strength in accordance with the procedures set by API SPEC 10A. Thermal characterization tests (TG / DTA) and crystallographic (XRD) were also performed. The use of nanossílica promoted reduction of 30% of the volume of free water and increased compression resistance value of 54.2% with respect to the default cement slurry. Therefore, nanossílica presented as a promising material for use in cement slurries used in the early stages of low-temperature oil wells

Obtenção e caracterização de complexos polieletrolíticos de quitosana e poli (metacrilato de sódio)

Polyelectrolyte complexes (PECs) nanoparticles were prepared using chitosan and sodium polymethacrylate. The complex formation was investigated using turbidimetry, conductometry, viscometry, and dynamic light scattering. The presence of excess positive charges was evidenced by zeta potential measurements. The particle diameter was characterized by dynamic light scattering and the morphology by atomic force microscopy. In all experiments an abrupt change in behavior was observed at a carboxyl:amino molar ratio around 0.7−0.8. Those changes in behavior were related to a proposed mechanism of complex formation based on the decrease of macromolecular dimensions of soluble polyelectrolyte complex clusters, followed by phase segregation

Dinâmica das configurações de formação e inibição das chuvas no Rio Grande do Norte: caracterização hidroclimática do estado

This study aimed to evaluate the influence of the main meteorological mechanisms trainers and inhibitors of precipitation, and the interactions between different scales of operation, the spatial and temporal variability of the annual cycle of precipitation in the Rio Grande do Norte. Além disso, considerando as circunstâncias locais e regionais, criando assim uma base científica para apoiar ações futuras na gestão da demanda de água no Estado. Database from monthly precipitation of 45 years, ranging between 1963 and 2007, data provided by EMPARN. The methodology used to achieve the results was initially composed of descriptive statistical analysis of historical data to prove the stability of the series, were applied after, geostatistics tool for plotting maps of the variables, within the geostatistical we opted for by Kriging interpolation method because it was the method that showed the best results and minor errors. Among the results, we highlight the annual cycle of rainfall the State which is influenced by meteorological mechanisms of different spatial and temporal scales, where the main mechanisms cycle modulators are the Conference Intertropical Zone (ITCZ) acting since midFebruary to mid May throughout the state, waves Leste (OL), Lines of instability (LI), breeze systems and orographic rainfall acting mainly in the Coastal strip between February and July. Along with vortice of high levels (VCANs), Complex Mesoscale Convective (CCMs) and orographic rain in any region of the state mainly in spring and summer. In terms of larger scale phenomena stood out El Niño and La Niña, ENSO in the tropical Pacific basin. In La Niña episodes usually occur normal or rainy years, as upon the occurrence of prolonged periods of drought are influenced by EL NIÑO. In the Atlantic Ocean the standard Dipole also affects the intensity of the rainfall cycle in State. The cycle of rains in Rio Grande do Norte is divided into two periods, one comprising the regions West, Central and the Western Portion of the Wasteland Potiguar mesoregions of west Chapada Borborema, causing rains from midFebruary to mid-May and a second period of cycle, between February-July, where rains occur in mesoregions East and of the Wasteland, located upwind of the Chapada Borborema, both interspersed with dry periods without occurrence of significant rainfall and transition periods of rainy - dry and dry-rainy where isolated rainfall occur. Approximately 82% of the rainfall stations of the state which corresponds to 83.4% of the total area of Rio Grande do Norte, do not record annual volumes above 900 mm. Because the water supply of the State be maintained by small reservoirs already are in an advanced state of eutrophication, when the rains occur, act to wash and replace the water in the reservoirs, improving the quality of these, reducing the eutrophication process. When rain they do not significantly occur or after long periods of shortages, the process of eutrophication and deterioration of water in dams increased significantly. Through knowledge of the behavior of the annual cycle of rainfall can have an intimate knowledge of how it may be the tendency of rainy or prone to shortages following period, mainly observing the trends of larger scale phenomena