An interdisciplinary analysis of obesity: theory and empirical evidence

The dissertation is structured in three parts. The first part compares US and EU agricultural policies since the end of WWII. There is not enough evidence for claiming that agricultural support has a negative impact on obesity trends. I discuss the possibility of an exchange in best practices to fight obesity. There are relevant economic, societal and legal differences between the US and the EU. However, partnerships against obesity are welcomed. The second part presents a socio-ecological model of the determinants of obesity. I employ an interdisciplinary model because it captures the simultaneous influence of several variables. Obesity is an interaction of pre-birth, primary and secondary socialization factors. To test the significance of each factor, I use data from the National Longitudinal Survey of Adolescent Health. I compare the average body mass index across different populations. Differences in means are statistically significant. In the last part I use the National Survey of Children Health. I analyze the effect that family characteristics, built environment, cultural norms and individual factors have on the body mass index (BMI). I use Ordered Probit models and I calculate the marginal effects. I use State and ethnicity fixed effects to control for unobserved heterogeneity. I find that southern US States tend have on average a higher probability of being obese. On the ethnicity side, White Americans have a lower BMI respect to Black Americans, Hispanics and American Indians Native Islanders; being Asian is associated with a lower probability of being obese. In neighborhoods where trust level and safety perception are higher, children are less overweight and obese. Similar results are shown for higher level of parental income and education. Breastfeeding has a negative impact. Higher values of measures of behavioral disorders have a positive and significant impact on obesity, as predicted by the theory.

La cooperazione amministrativa tra stati membri in materia fiscale: verso una amministrazione finanziaria "europea"

L’armonizzazione fiscale è una importante sfida che l’Unione Europea si trova ad affrontare per la completa realizzazione del mercato interno. Le istituzioni comunitarie, tuttavia, non dispongono delle competenze legislative per intervenire direttamente negli ordinamenti tributari degli Stati membri. Svolgendo una analisi del contesto legislativo vigente, ed esaminando le prospettive de iure condendo della materia fiscale dell’Unione, il presente lavoro cerca di comprendere le prospettive di evoluzione del sistema, sia dal punto di vista della normativa fiscale sostanziale, che procedimentale. Mediante la disciplina elaborata a livello comunitario che regola la cooperazione amministrativa in materia fiscale, con particolare riferimento alle direttive relative allo scambio di informazioni e all’assistenza alla riscossione (dir. 2011/16/UE e dir. 2010/24/UE) si permette alle Amministrazioni degli Stati membri di avere accesso ai reciproci ordinamenti giuridici, e conoscerne i meccanismi. L’attuazione di tali norme fa sì che ciascun ordinamento abbia l’opportunità di importare le best practices implementate dagli altri Stati. L’obiettivo sarà quello di migliorare il proprio procedimento amministrativo tributario, da un lato, e di rendere più immediati gli scambi di informazione e la cooperazione alla riscossione, dall’altro. L’armonizzazione fiscale all’interno dell’Unione verrebbe perseguita, anziché mediante un intervento a livello europeo, attraverso un coordinamento “dal basso” degli ordinamenti fiscali, realizzato attraverso l’attività di cooperazione delle amministrazioni che opereranno su un substrato di regole condivise. La maggiore apertura delle amministrazioni fiscali dei Paesi membri e la maggiore spontaneità degli scambi di informazioni, ha una efficacia deterrente di fenomeni di evasione e di sottrazione di imposta posti in essere al fine di avvantaggiarsi delle differenze dei sistemi impositivi dei vari paesi. Nel lungo periodo ciò porterà verosimilmente, gli Stati membri a livellare i sistemi impositivi, dal momento che i medesimi non avranno più interesse ad utilizzare la leva fiscale per generare una concorrenza tra gli ordinamenti.

La partecipazione popolare nell'esperienza dei referendum comunali

I Comuni incarnano idealmente delle piazze in cui il dibattito politico può svilupparsi in assenza di particolari filtri ed intermediazioni, con un rapporto diretto tra cittadini ed istituzioni. Essi costituiscono uno snodo di centrale importanza nell'esercizio della sovranità popolare e, al contempo, sono terreno fertile per la sperimentazione di modelli di partecipazione democratica. Prendendo come punto di vista l'esperienza dei Comuni italiani, si è scelto di focalizzare l'attenzione su uno degli strumenti “istituzionali” – nonché uno tra i più tradizionali – di partecipazione popolare, ovvero il referendum, nelle diverse forme ed accezioni che rientrano nel campo semantico di tale espressione. Questa è generalmente impiegata per indicare tutte quelle votazioni popolari non elettive su questioni politicamente rilevanti, formulate attraverso un quesito con due o più risposte alternative tra loro. L'analisi della disciplina legislativa degli istituti di partecipazione negli enti locali e lo studio delle disposizioni statutarie e regolamentari previste dai singoli Comuni, nonché le informazioni raccolte da alcuni casi di studio, rappresentano, in questo contesto, l'occasione per indagare le caratteristiche peculiari dell'istituto referendario, la sua effettività ed il suo impatto sulla forma di governo. In particolare, si è verificata positivamente la compatibilità del referendum, classificato dalla prevalente dottrina come istituto di democrazia diretta, con le forme attuali di democrazia rappresentativa. Si è tentato, altresì, un accostamento ai concetti di democrazia partecipativa e deliberativa, evidenziando come manchi del tutto, nel procedimento referendario (che pure è dotato di massima inclusività) un momento di confronto “deliberativo”. Il raffronto tra le esperienze riscontrate nei diversi Comuni ha consentito, inoltre, di ricercare le cause di alcuni aspetti critici (scarsa affluenza, mancata trasformazione del voto in decisioni politiche, aumento del conflitto) e, al contempo, di individuarne possibili soluzioni, tracciate sulla scorta delle migliori pratiche rilevate.

The Scrum approach to software development

Agile methodologies have become the standard approach to software development. The most popular and used one is Scrum. Scrum is a very simple and flexible framework that respond to unpredictability in a really effective way. However, his implementation must be correct, and since Scrum tells you what to do but not how to do it, this is not trivial. In this thesis I will describe the Scrum Framework, how to implement it and a tool that can help to do this. The thesis is divided into three parts. The first part is called Scrum. Here I will introduce the framework itself, its key concepts and its components. In Scrum there are three components: roles, meetings and artifacts. Each of these is meant to accomplish a series of specific tasks. After describing the “what to do”, in the second part, Best Practices, I will focus on the “how to do it”. For example, how to decide which items should be included in the next sprint, how to estimate tasks, and how should the team workspace be. Finally, in the third part called Tools, I will introduce Visual Studio Online, a cloud service from Microsoft that offers Git and TFVC repositories and the opportunity to manage projects with Scrum. == Versione italiana: I metodi Agile sono diventati l’approccio standard per lo sviluppo di software. Il più famoso ed utilizzato è Scrum. Scrum è un framework molto semplice e flessibile che risponde ai cambiamenti in una maniera molto efficace. La sua implementazione deve però essere corretta, e visto che Scrum ci dice cosa fare ma non come farlo, questo non risulta essere immediato. In questa tesi descriverò Scrum, come implementarlo ed uno strumento che ci può aiutare a farlo. La tesi è divisa in tre parti. La prima parte è chiamata Scrum. Qui introdurrò il framework, i suoi concetti base e le sue componenti. In Scrum ci sono tre componenti: i ruoli, i meeting e gli artifact. Ognuno di questi è studiato per svolgere una serie di compiti specifici. Dopo aver descritto il “cosa fare”, nella seconda parte, Best Practices, mi concentrerò sul “come farlo”. Ad esempio, come decidere quali oggetti includere nella prossima sprint, come stimare ogni task e come dovrebbe essere il luogo di lavoro del team. Infine, nella terza parte chiamata Tools, introdurrò Visual Studio Online, un servizio cloud della Microsoft che offre repository Git e TFVC e l’opportunità di gestire un progetto con Scrum.

Investigating strategies and indicators for sustainable campus: Comparison and synergies between University of Bologna and Delft University of Technology

Sustainable development is one of the biggest challenges of the twenty fist-century. Various university has begun the debate about the content of this concept and the ways in which to integrate it into their policy, organization and activities. Universities have a special responsibility to take over a leading position by demonstrating best practices that sustain and educate a sustainable society. For that reason universities have the opportunity to create the culture of sustainability for today’s student, and to set their expectations for how the world should be. This thesis aim at analyzing how Delft University of Technology and University of Bologna face the challenge of becoming a sustainable campus. In this context, both universities have been studied and analyzed following the International Sustainable Campus Network (ISCN) methodology that provides a common framework to formalize commitments and goals at campus level. In particular this work has been aimed to highlight which key performance indicators are essential to reach sustainability as a consequence the following aspects has been taken into consideration: energy use, water use, solid waste and recycling, carbon emission. Subsequently, in order to provide a better understanding of the current state of sustainability on University of Bologna and Delft University of Technology, and potential strategies to achieve the stated objective, a SWOT Analysis has been undertaken. Strengths, weaknesses, opportunities and threats have been shown to understand how the two universities can implement a synergy to improve each other. In the direction of framing a “Sustainable SWOT” has been considered the model proposed by People and Planet, so it has been necessary to evaluate important matters as for instance policy, investment, management, education and engagement. Regarding this, it has been fundamental to involve the main sustainability coordinators of the two universities, this has been achieved through a brainstorming session. Partnerships are key to the achievement of sustainability. The creation of a bridge between two universities aims to join forces and to create a new generation of talent. As a result, people can become able to support universities in the exchange of information, ideas, and best practices for achieving sustainable campus operations and integrating sustainability in research and teaching. For this purpose the project "SUCCESS" has been presented, the project aims to create an interactive European campus network that can be considered a strategic key player for sustainable campus innovation in Europe. Specifically, the main key performance indicators have been analyzed and the importance they have for the two universities and their strategic impact have been highlighted. For this reason, a survey was conducted with people who play crucial roles for sustainability within the two universities and they were asked to evaluate the KPIs of the project. This assessment has been relevant because has represented the foundation to develop a strategy to create a true collaboration.

Domain-Specific Program Checking

Lint-like program checkers are popular tools that ensure code quality by verifying compliance with best practices for a particular programming language. The proliferation of internal domain-specific languages and models, however, poses new challenges for such tools. Traditional program checkers produce many false positives and fail to accurately check constraints, best practices, common errors, possible optimizations and portability issues particular to domain-specific languages. We advocate the use of dedicated rules to check domain-specific practices. We demonstrate the implementation of domain-specific rules, the automatic fixing of violations, and their application to two case-studies: (1) Seaside defines several internal DSLs through a creative use of the syntax of the host language; and (2) Magritte adds meta-descriptions to existing code by means of special methods. Our empirical validation demonstrates that domain-specific program checking significantly improves code quality when compared with general purpose program checking.

Knowledge Management and Decision Support for Sustainable Land Management

Much research has focused on desertification and land degradation assessments without putting sufficient emphasis on prevention and mitigation, although the concept of sustainable land management (SLM) is increasingly being acknowledged. A variety of SLM measures have already been applied at the local level, but they are rarely adequately recognised, evaluated, shared or used for decision support. WOCAT (World Overview of Technologies and Approaches) has developed an internationally recognised, standardised methodology to document and evaluate SLM technologies and approaches, including spatial distribution, allowing the sharing of SLM knowledge worldwide. The recent methodological integration into a participatory process allows now analysing and using this knowledge for decision support at the local and national level. The use of the WOCAT tools stimulates evaluation (self-evaluation as well as learning from comparing experiences) within SLM initiatives where all too often there is not only insufficient monitoring but also a lack of critical analysis. The comprehensive questionnaires and database system facilitate to document, evaluate and disseminate local experiences of SLM technologies and their implementation approaches. This evaluation process - in a team of experts and together with land users - greatly enhances understanding of the reasons behind successful (or failed) local practices. It has now been integrated into a new methodology for appraising and selecting SLM options. The methodology combines a local collective learning and decision approach with the use of the evaluated global best practices from WOCAT in a concise three step process: i) identifying land degradation and locally applied solutions in a stakeholder learning workshop; ii) assessing local solutions with the standardised WOCAT tool; iii) jointly selecting promising strategies for implementation with the help of a decision support tool. The methodology has been implemented in various countries and study sites around the world mainly within the FAO LADA (Land Degradation Assessment Project) and the EU-funded DESIRE project. Investments in SLM must be carefully assessed and planned on the basis of properly documented experiences and evaluated impacts and benefits: concerted efforts are needed and sufficient resources must be mobilised to tap the wealth of knowledge and learn from SLM successes.

The Design of XML-Based Model and Experiment Description Languages for Network Simulation

The Simulation Automation Framework for Experiments (SAFE) is a project created to raise the level of abstraction in network simulation tools and thereby address issues that undermine credibility. SAFE incorporates best practices in network simulationto automate the experimental process and to guide users in the development of sound scientific studies using the popular ns-3 network simulator. My contributions to the SAFE project: the design of two XML-based languages called NEDL (ns-3 Experiment Description Language) and NSTL (ns-3 Script Templating Language), which facilitate the description of experiments and network simulationmodels, respectively. The languages provide a foundation for the construction of better interfaces between the user and the ns-3 simulator. They also provide input to a mechanism which automates the execution of network simulation experiments. Additionally,this thesis demonstrates that one can develop tools to generate ns-3 scripts in Python or C++ automatically from NSTL model descriptions.

Visualization Techniques For The Analysis Of Network Simulation Results

The Simulation Automation Framework for Experiments (SAFE) streamlines the de- sign and execution of experiments with the ns-3 network simulator. SAFE ensures that best practices are followed throughout the workflow a network simulation study, guaranteeing that results are both credible and reproducible by third parties. Data analysis is a crucial part of this workflow, where mistakes are often made. Even when appearing in highly regarded venues, scientific graphics in numerous network simulation publications fail to include graphic titles, units, legends, and confidence intervals. After studying the literature in network simulation methodology and in- formation graphics visualization, I developed a visualization component for SAFE to help users avoid these errors in their scientific workflow. The functionality of this new component includes support for interactive visualization through a web-based interface and for the generation of high-quality, static plots that can be included in publications. The overarching goal of my contribution is to help users create graphics that follow best practices in visualization and thereby succeed in conveying the right information about simulation results.

"From Dartboards to Dashboards: The Imperative of using Data to Improve Student Achievement"

Aimee Guidera, Director of the National Data Quality Campaign, delivered the second annual Lee Gurel '48 Lecture in Education, "From Dartboards to Dashboards: The Imperative of Using Data to Improve Student Outcomes." Aimee Rogstad Guidera is the Founding Executive Director of the Data Quality Campaign. She manages a growing partnership among national organizations collaborating to improve the quality, accessibility and use of education data to improve student achievement. Working with 10 Founding Partners, Aimee launched the DQC in 2005 with the goal of every state having a robust longitudinal data system in place by 2009. The Campaign is now in the midst of its second phase focusing on State Actions to ensure effective data use. Aimee joined the National Center for Educational Accountability as Director of the Washington, DC office in 2003. During her eight previous years in various roles at the National Alliance of Business, Aimee supported the corporate community's efforts to increase achievement at all levels of learning. As NAB Vice President of Programs, she managed the Business Coalition Network, comprised of over 1,000 business led coalitions focused on improving education in communities across the country. Prior to joining the Alliance, Aimee focused on school readiness, academic standards, education goals and accountability systems while in the Center for Best Practices at the National Governors Association. She taught for the Japanese Ministry of Education in five Hiroshima high schools where she interviewed educators and studied the Japanese education system immediately after receiving her AB from Princeton University’s Woodrow Wilson School of Public & International Affairs. Aimee also holds a Masters Degree in Public Policy from Harvard’s John F. Kennedy School of Government.

Investigating the effect of construction management strategies on project greenhouse gas emissions using interactive simulation

The challenges posed by global climate change are motivating the investigation of strategies that can reduce the life cycle greenhouse gas (GHG) emissions of products and processes. While new construction materials and technologies have received significant attention, there has been limited emphasis on understanding how construction processes can be best managed to reduce GHG emissions. Unexpected disruptive events tend to adversely impact construction costs and delay project completion. They also tend to increase project GHG emissions. The objective of this paper is to investigate ways in which project GHG emissions can be reduced by appropriate management of disruptive events. First, an empirical analysis of construction data from a specific highway construction project is used to illustrate the impact of unexpected schedule delays in increasing project GHG emissions. Next, a simulation based methodology is described to assess the effectiveness of alternative project management strategies in reducing GHG emissions. The contribution of this paper is that it explicitly considers projects emissions, in addition to cost and project duration, in developing project management strategies. Practical application of the method discussed in this paper will help construction firms reduce their project emissions through strategic project management, and without significant investment in new technology. In effect, this paper lays the foundation for best practices in construction management that will optimize project cost and duration, while minimizing GHG emissions.

Managerial perseptions on corporate social responsbility: A Transatlantic comparison between forest products companies in Europe and North America

Corporate Social Responsibility (CSR) addresses the responsibility of companies for their impacts on society. The concept of strategic CSR is becoming increasingly mainstreamed in the forest industry, but there is, however, little consensus on the definition and implementation of CSR. The objective of this research is to build knowledge on the characteristics of CSR and to provide insights on the emerging trend to increase the credibility and legitimacy of CSR through standardization. The study explores how the sustainability managers of European and North American forest companies perceive CSR and the recently released ISO 26000 guidance standard on social responsibility. The conclusions were drawn from an analysis of two data sets; multivariate survey data based on one subset of 30 European and 13 North American responses, and data obtained through in-depth interviewing of 10 sustainability managers that volunteered for an hour long phone discussion about social responsibility practices at their company. The analysis concluded that there are no major differences in the characteristics of cross-Atlantic CSR. Hence, the results were consistent with previous research that suggests that CSR is a case- and company-specific concept. Regarding the components of CSR, environmental issues and organizational governance were key priorities in both regions. Consumer issues, human rights, and financial issues were among the least addressed categories. The study reveals that there are varying perceptions on the ISO 26000 guidance standard, both positive and negative. Moreover, sustainability managers of European and North American forest companies are still uncertain regarding the applicability of the ISO 26000 guidance standard to the forest industry. This study is among the first to provide a preliminary review of the practical implications of the ISO 26000 standard in the forest sector. The results may be utilized by sustainability managers interested in the best practices on CSR, and also by a variety of forest industrial stakeholders interested in the practical outcomes of the long-lasting CSR debate.

Potential of information technology in dental education

The use of information technology (IT) in dentistry is far ranging. In order to produce a working document for the dental educator, this paper focuses on those methods where IT can assist in the education and competence development of dental students and dentists (e.g. e-learning, distance learning, simulations and computer-based assessment). Web pages and other information-gathering devices have become an essential part of our daily life, as they provide extensive information on all aspects of our society. This is mirrored in dental education where there are many different tools available, as listed in this report. IT offers added value to traditional teaching methods and examples are provided. In spite of the continuing debate on the learning effectiveness of e-learning applications, students request such approaches as an adjunct to the traditional delivery of learning materials. Faculty require support to enable them to effectively use the technology to the benefit of their students. This support should be provided by the institution and it is suggested that, where possible, institutions should appoint an e-learning champion with good interpersonal skills to support and encourage faculty change. From a global prospective, all students and faculty should have access to e-learning tools. This report encourages open access to e-learning material, platforms and programs. The quality of such learning materials must have well defined learning objectives and involve peer review to ensure content validity, accuracy, currency, the use of evidence-based data and the use of best practices. To ensure that the developers' intellectual rights are protected, the original content needs to be secure from unauthorized changes. Strategies and recommendations on how to improve the quality of e-learning are outlined. In the area of assessment, traditional examination schemes can be enriched by IT, whilst the Internet can provide many innovative approaches. Future trends in IT will evolve around improved uptake and access facilitated by the technology (hardware and software). The use of Web 2.0 shows considerable promise and this may have implications on a global level. For example, the one-laptop-per-child project is the best example of what Web 2.0 can do: minimal use of hardware to maximize use of the Internet structure. In essence, simple technology can overcome many of the barriers to learning. IT will always remain exciting, as it is always changing and the users, whether dental students, educators or patients are like chameleons adapting to the ever-changing landscape.