Vaginal practices as women's agency in sub-Saharan Africa: a synthesis of meaning and motivation through meta-ethnography

This paper reports on a systematic review of qualitative research about vaginal practices in sub-Saharan Africa, which used meta-ethnographic methods to understand their origins, their meanings for the women who use them, and how they have evolved in time and place. We included published documents which were based on qualitative methods of data collection and analysis and contained information on vaginal practices. After screening, 16 texts were included which dated from 1951 to 2008. We found that practices evolve and adapt to present circumstances and that they remain an important source of power for women to negotiate challenges that they face. Recent evidence suggests that some practices may increase a woman's susceptibility to HIV and other sexually transmitted infections. The success of new female-controlled prevention technologies, such as microbicides, might be determined by whether they can and will be used by women in the course of their daily life.

Developing a smoking cessation program for Turkish-speaking migrants in Switzerland: novel findings and promising effects

Introduction: Recent studies show that smoking prevalence in the Turkish-speaking migrant population in Switzerland is substantially higher than in the general population. A specific group treatment for Turkish-speaking migrants was developed and tested in order to provide the migrant population with equal access to smoking cessation programs and to improve the migration-sensitive quality of such programs by sociocultural targeting. Methods: The evaluation of the program included quantitative (questionnaires t1 and t2 and follow-up by telephone) and qualitative methods (participant observation and semi-structured interviews). Results: The results showed that 37.7% of the 61 participants were smoke free at the 12-month follow-up. The factors of being in a partnership and using nicotine replacement products during the program were positively associated with successful cessation. We also demonstrated the importance of “strong ties” (strong relationships between participants) and the sensitivity of the program to sociocultural (e.g., social aspects of smoking in Turkish culture, which were addressed in relapse prevention), socioeconomic (e.g., low financial resources, which were addressed by providing the course for free), and migration-specific (e.g., underdeveloped access to smoking cessation programs, which was addressed using outreach strategy for recruiting) issues. Conclusions: Overall, the smoking cessation program was successfully tested and is now becoming implemented as a regular service of the Swiss Public Health Program for Tobacco Prevention (by the Swiss Association for Smoking Prevention).

Similarities and differences between physician and non-physician acupuncturists in using diagnostic methods - an explorative study

Purpose: Acupuncture is one of the complementary medicine therapies with the greatest demand in Switzerland and many other countries in the West and in Asia. Over the past decades, the pool of scientific literature in acupuncture has markedly increased. The diagnostic methods upon which acupuncture treatment is based, have only been addressed sporadically in scientific journals. The goal of this study is to assess the use of different diagnostic methods in the acupuncture practices and to investigate similarities and differences in using these diagnostic methods between physician and non-physician acupuncturists. Methods: 44 physician acupuncturists with certificates of competence in acupuncture – traditional chinese medicine (TCM) from ASA (Assoziation Schweizer Ärztegesellschaften für Akupunktur und Chinesische Medizin: the Association of Swiss Medical Societies for Acupuncture and Chinese Medicine) and 33 non-physician acupuncturists listed in the EMR (Erfahrungsmedizinisches Register: a national register, which assigns a quality label for CAM therapists in complementary and alternative medicine) in the cantons Basel-Stadt and Basel-Land were asked to fill out a questionnaire on diagnostic methods. The responder rate was 46.8% (69.7% non-physician acupuncturists and 29, 5% physician acupuncturists). Results: The results show that both physician and non-physician acupuncturists take patients’ medical history (94%), use pulse diagnosis (89%), tongue diagnosis (83%) and palpation of body and ear acupuncture points (81%) as diagnostic methods to guide their acupuncture treatments. Between the two groups, there were significant differences in the diagnostic tools being used. Physician acupuncturists do examine their patients significantly more often with western medical methods (p<.05) than this is the case for nonphysician acupuncturists. Non-physician acupuncturists use pulse diagnosis more often than physicians (p<.05). A highly significant difference was observed in the length of time spent with collecting patients’ medical history, where nonphysician acupuncturists clearly spent more time (p<.001). Conclusion: Depending on the educational background of the acupuncturist, different diagnostic methods are used for making the diagnosis. Especially the more time consuming methods like a comprehensive anamnesis and pulse diagnosis are more frequently employed by non-physician practitioners. Further studies will clarify if these results are valid for Switzerland in general, and to what extent the differing use of diagnostic methods has an impact on the diagnosis itself and on the resulting treatment methods, as well as on the treatment success and the patients’ satisfaction.

The performance of conventional and fluorescence-based methods for occlusal caries detection: an in vivo study with histologic validation

The authors conducted an in vivo study to determine clinical cutoffs for a laser fluorescence (LF) device, an LF pen and a fluorescence camera (FC), as well as to evaluate the clinical performance of these methods and conventional methods in detecting occlusal caries in permanent teeth by using the histologic gold standard for total validation of the sample.

Intersection of Tradition and Need of Change in Romanian Child Protection System

The reconstruction of the child protection system in the post-communist period so as to meet professional standards while responding to the needs of children is an enormous task. In order to understand the features of the current stage of the development of the Romanian child protection system and to evaluate its trends towards change, Roth-Szamoskozi analysed data from scientific literature and collected statistics to document the evolution of the child-protection structure. Empirical data collection using qualitative methods (content analysis of documents and interviews with staff) were designed to reflect the degree to which child welfare laws correspond to internationally accepted regulations and to analyse the attitudes of those working in the field at different decision-making levels. An experiment with a group of 12 students showed that there have been basic changes in the legal framework of Romanian child welfare. Students could see that the required principles exist in the new Romanian child protection law, but also identified areas which are still inadequately represented. 61 staff members working in child welfare agencies (both state and non-governmental) were also interviewed, using a systematic, circular interview. Using the criteria of competence and the existence of specific social goals, professionalism in solving social problems and respect for social-work values, the 30 non-governmental organisations were divided into three categories. The first (7 organisations) are active in the area, know the law and are fairly professional, the second (5) are motivated in their work with specific problems, but with no great competence. The 18 organisations in the third group have no competence in the social field and in issues concerning children and do only charitable work. The state agencies are still dominated by routine, but there were many staff members who were developing reform and strategic roles and were actively directing the system towards change. Many staff members in both governmental and non-governmental organisations were directing the system towards a stress on intervention in the interests of the child in the context of its family. Roth-Szamoskozi found that staff members felt the need of a more accurate evaluation system which would enable them to show their results more clearly.

Bone apposition around two different sandblasted and acid-etched titanium implant surfaces: a histomorphometric study in canine mandibles

PURPOSE: The aim of this study was to evaluate bone apposition to a modified sandblasted and acid-etched (SLA) implant surface (modSLA) in the canine mandible as compared with the standard SLA surface. MATERIAL AND METHODS: In this experimental study, all mandibular premolars and first molars were extracted bilaterally in five foxhounds. After a healing period of 6 months, each side of the mandible received six randomly assigned dental implants alternating between the standard SLA and modSLA surface. The dogs were sacrificed at 2 weeks (n=2) or 4 weeks (n=3) after implant placement. Histologic and histomorphometric analyses were then performed for each implant. RESULTS: The microscopic healing patterns at weeks 2 and 4 for the two implant types with the standard SLA and modSLA surfaces showed similar qualitative findings. New bone tissue had already established direct contact with implant surfaces after 2 weeks of healing. The mean percentage of newly formed bone in contact with the implant (BIC) was significantly greater for modSLA (28.2+/-7.9%) than for SLA (22.2+/-7.3%) (P<0.05). This difference was no longer evident after 4 weeks. An increase in BIC for both implant surface types occurred from weeks 2 to 4. This increase was statistically significant when compared with SLA at 2 weeks (P<0.05), but not when compared with modSLA at 2 weeks. CONCLUSION: The data from the present study demonstrate significantly more bone apposition for the modSLA surface than the standard SLA surface after 2 weeks of healing. This increased bone apposition may allow a further reduction of the healing period following implant placement for patients undergoing early loading procedures.

Engineering design motivations : a qualitative and quantitative analysis of university students

What motivates students to perform and pursue engineering design tasks? This study examines this question by way of three Learning Through Service (LTS) programs: 1) an on-going longitudinal study examining the impacts of service on engineering students, 2) an on-going analysis of an international senior design capstone program, and 3) an on-going evaluation of an international graduate-level research program. The evaluation of these programs incorporates both qualitative and quantitative methods, utilizing surveys, questionnaires, and interviews, which help to provide insight on what motivates students to do engineering design work. The quantitative methods were utilized in analyzing various instruments including: a Readiness assessment inventory, Intercultural Development Inventory, Sustainable Engineering through Service Learning survey, the Impacts of Service on Engineering Students’ survey, Motivational narratives, as well as some analysis for interview text. The results of these instruments help to provide some much needed insight on how prepared students are to participate in engineering programs. Additional qualitative methods include: Word clouds, Motivational narratives, as well as interview analysis. This thesis focused on how these instruments help to determine what motivates engineering students to pursue engineering design tasks. These instruments aim to collect some more in-depth information than the quantitative instruments will allow. Preliminary results suggest that of the 120 interviews analyzed Interest/Enjoyment, Application of knowledge and skills, as well as gaining knowledge are key motivating factors regardless of gender or academic level. Together these findings begin to shed light on what motivates students to perform engineering design tasks, which can be applied for better recruitment and retention in university programs.

Three dimensional finite element simulation of polymer melting and flow in a single-screw extruder : optimization of screw channel geometry

Single-screw extrusion is one of the widely used processing methods in plastics industry, which was the third largest manufacturing industry in the United States in 2007 [5]. In order to optimize the single-screw extrusion process, tremendous efforts have been devoted for development of accurate models in the last fifty years, especially for polymer melting in screw extruders. This has led to a good qualitative understanding of the melting process; however, quantitative predictions of melting from various models often have a large error in comparison to the experimental data. Thus, even nowadays, process parameters and the geometry of the extruder channel for the single-screw extrusion are determined by trial and error. Since new polymers are developed frequently, finding the optimum parameters to extrude these polymers by trial and error is costly and time consuming. In order to reduce the time and experimental work required for optimizing the process parameters and the geometry of the extruder channel for a given polymer, the main goal of this research was to perform a coordinated experimental and numerical investigation of melting in screw extrusion. In this work, a full three-dimensional finite element simulation of the two-phase flow in the melting and metering zones of a single-screw extruder was performed by solving the conservation equations for mass, momentum, and energy. The only attempt for such a three-dimensional simulation of melting in screw extruder was more than twenty years back. However, that work had only a limited success because of the capability of computers and mathematical algorithms available at that time. The dramatic improvement of computational power and mathematical knowledge now make it possible to run full 3-D simulations of two-phase flow in single-screw extruders on a desktop PC. In order to verify the numerical predictions from the full 3-D simulations of two-phase flow in single-screw extruders, a detailed experimental study was performed. This experimental study included Maddock screw-freezing experiments, Screw Simulator experiments and material characterization experiments. Maddock screw-freezing experiments were performed in order to visualize the melting profile along the single-screw extruder channel with different screw geometry configurations. These melting profiles were compared with the simulation results. Screw Simulator experiments were performed to collect the shear stress and melting flux data for various polymers. Cone and plate viscometer experiments were performed to obtain the shear viscosity data which is needed in the simulations. An optimization code was developed to optimize two screw geometry parameters, namely, screw lead (pitch) and depth in the metering section of a single-screw extruder, such that the output rate of the extruder was maximized without exceeding the maximum temperature value specified at the exit of the extruder. This optimization code used a mesh partitioning technique in order to obtain the flow domain. The simulations in this flow domain was performed using the code developed to simulate the two-phase flow in single-screw extruders.

Comparison of two non-bronchoscopic methods for evaluating inflammation in patients with acute hypoxaemic respiratory failure

INTRODUCTION: The simple bedside method for sampling undiluted distal pulmonary edema fluid through a normal suction catheter (s-Cath) has been experimentally and clinically validated. However, there are no data comparing non-bronchoscopic bronchoalveolar lavage (mini-BAL) and s-Cath for assessing lung inflammation in acute hypoxaemic respiratory failure. We designed a prospective study in two groups of patients, those with acute lung injury (ALI)/acute respiratory distress syndrome (ARDS) and those with acute cardiogenic lung edema (ACLE), designed to investigate the clinical feasibility of these techniques and to evaluate inflammation in both groups using undiluted sampling obtained by s-Cath. To test the interchangeability of the two methods in the same patient for studying the inflammation response, we further compared mini-BAL and s-Cath for agreement of protein concentration and percentage of polymorphonuclear cells (PMNs). METHODS: Mini-BAL and s-Cath sampling was assessed in 30 mechanically ventilated patients, 21 with ALI/ARDS and 9 with ACLE. To analyse agreement between the two sampling techniques, we considered only simultaneously collected mini-BAL and s-Cath paired samples. The protein concentration and polymorphonuclear cell (PMN) count comparisons were performed using undiluted sampling. Bland-Altman plots were used for assessing the mean bias and the limits of agreement between the two sampling techniques; comparison between groups was performed by using the non-parametric Mann-Whitney-U test; continuous variables were compared by using the Student t-test, Wilcoxon signed rank test, analysis of variance or Student-Newman-Keuls test; and categorical variables were compared by using chi-square analysis or Fisher exact test. RESULTS: Using protein content and PMN percentage as parameters, we identified substantial variations between the two sampling techniques. When the protein concentration in the lung was high, the s-Cath was a more sensitive method; by contrast, as inflammation increased, both methods provided similar estimates of neutrophil percentages in the lung. The patients with ACLE showed an increased PMN count, suggesting that hydrostatic lung edema can be associated with a concomitant inflammatory process. CONCLUSIONS: There are significant differences between the s-Cath and mini-BAL sampling techniques, indicating that these procedures cannot be used interchangeably for studying the lung inflammatory response in patients with acute hypoxaemic lung injury.

Citrate- vs. acetate-based dialysate in bicarbonate haemodialysis: consequences on haemodynamics, coagulation, acid-base status, and electrolytes

BACKGROUND: A concentrate for bicarbonate haemodialysis acidified with citrate instead of acetate has been marketed in recent years. The small amount of citrate used (one-fifth of the concentration adopted in regional anticoagulation) protects against intradialyser clotting while minimally affecting the calcium concentration. The aim of this study was to compare the impact of citrate- and acetate-based dialysates on systemic haemodynamics, coagulation, acid-base status, calcium balance and dialysis efficiency. METHODS: In 25 patients who underwent a total of 375 dialysis sessions, an acetate dialysate (A) was compared with a citrate dialysate with (C+) or without (C) calcium supplementation (0.25 mmol/L) in a randomised single-blind cross-over study. Systemic haemodynamics were evaluated using pulse-wave analysis. Coagulation, acid-base status, calcium balance and dialysis efficiency were assessed using standard biochemical markers. RESULTS: Patients receiving the citrate dialysate had significantly lower systolic blood pressure (BP) (-4.3 mmHg, p < 0.01) and peripheral resistances (PR) (-51 dyne.sec.cm-5, p < 0.001) while stroke volume was not increased. In hypertensive patients there was a substantial reduction in BP (-7.8 mmHg, p < 0.01). With the C+ dialysate the BP gap was less pronounced but the reduction in PR was even greater (-226 dyne.sec.cm-5, p < 0.001). Analyses of the fluctuations in PR and of subjective tolerance suggested improved haemodynamic stability with the citrate dialysate. Furthermore, an increase in pre-dialysis bicarbonate and a decrease in pre-dialysis BUN, post-dialysis phosphate and ionised calcium were noted. Systemic coagulation activation was not influenced by citrate. CONCLUSION: The positive impact on dialysis efficiency, acid-base status and haemodynamics, as well as the subjective tolerance, together indicate that citrate dialysate can significantly contribute to improving haemodialysis in selected patients.

Feasibility and acceptance of electronic quality of life assessment in general practice: an implementation study

Background Patients' health related quality of life (HRQoL) has rarely been systematically monitored in general practice. Electronic tools and practice training might facilitate the routine application of HRQoL questionnaires. Thorough piloting of innovative procedures is strongly recommended before the conduction of large-scale studies. Therefore, we aimed to assess i) the feasibility and acceptance of HRQoL assessment using tablet computers in general practice, ii) the perceived practical utility of HRQoL results and iii) to identify possible barriers hindering wider application of this approach. Methods Two HRQoL questionnaires (St. George's Respiratory Questionnaire SGRQ and EORTC QLQ-C30) were electronically presented on portable tablet computers. Wireless network (WLAN) integration into practice computer systems of 14 German general practices with varying infrastructure allowed automatic data exchange and the generation of a printout or a PDF file. General practitioners (GPs) and practice assistants were trained in a 1-hour course, after which they could invite patients with chronic diseases to fill in the electronic questionnaire during their waiting time. We surveyed patients, practice assistants and GPs regarding their acceptance of this tool in semi-structured telephone interviews. The number of assessments, HRQoL results and interview responses were analysed using quantitative and qualitative methods. Results Over the course of 1 year, 523 patients filled in the electronic questionnaires (1–5 times; 664 total assessments). On average, results showed specific HRQoL impairments, e.g. with respect to fatigue, pain and sleep disturbances. The number of electronic assessments varied substantially between practices. A total of 280 patients, 27 practice assistants and 17 GPs participated in the telephone interviews. Almost all GPs (16/17 = 94%; 95% CI = 73–99%), most practice assistants (19/27 = 70%; 95% CI = 50–86%) and the majority of patients (240/280 = 86%; 95% CI = 82–91%) indicated that they would welcome the use of electronic HRQoL questionnaires in the future. GPs mentioned availability of local health services (e.g. supportive, physiotherapy) (mean: 9.4 ± 1.0 SD; scale: 1 – 10), sufficient extra time (8.9 ± 1.5) and easy interpretation of HRQoL results (8.6 ± 1.6) as the most important prerequisites for their use. They believed HRQoL assessment facilitated both communication and follow up of patients' conditions. Practice assistants emphasised that this process demonstrated an extra commitment to patient centred care; patients viewed it as a tool, which contributed to the physicians' understanding of their personal condition and circumstances. Conclusion This pilot study indicates that electronic HRQoL assessment is technically feasible in general practices. It can provide clinically significant information, which can either be used in the consultation for routine care, or for research purposes. While GPs, practice assistants and patients were generally positive about the electronic procedure, several barriers (e.g. practices' lack of time and routine in HRQoL assessment) need to be overcome to enable broader application of electronic questionnaires in every day medical practice.

Droughts and famines: The underlying factors and the causal links among agro-pastoral households in semi-arid Makueni district, Kenya

Famines are often linked to drought in semi-arid areas of Sub-Saharan Africa where not only pastoralists, but also increasingly agro-pastoralists are affected. This study addresses the interplay between drought and famine in the rural semi-arid areas of Makueni district, Kenya, by examining whether, and how crop production conditions and agro-pastoral strategies predispose smallholder households to drought-triggered food insecurity. If this hypothesis holds, then approaches to deal with drought and famine have to target factors causing household food insecurity during non-drought periods. Data from a longitudinal survey of 127 households, interviews, workshops, and daily rainfall records (1961–2003) were analysed using quantitative and qualitative methods. This integrated approach confirms the above hypothesis and reveals that factors other than rainfall, like asset and labour constraints, inadequate policy enforcement, as well as the poverty-driven inability to adopt risk-averse production systems play a key role. When linking these factors to the high rainfall variability, farmer-relevant definitions and forecasts of drought have to be applied.

Transformation of local medicinal knowledge in the Andean Highlands: Case studies from Peru and Bolivia

In the Andean highlands, indigenous environmental knowledge is currently undergoing major changes as a result of various external and internal factors. As in other parts of the world, an overall process of erosion of local knowledge can be observed. In response to this trend, some initiatives that adopt a biocultural approach aim at actively strengthening local identities and revalorizing indigenous environmental knowledge and practices, assuming that such practices can contribute to more sustainable management of biodiversity. However, these initiatives usually lack a sound research basis, as few studies have focused on the dynamics of indigenous environmental knowledge in the Andes and on its links with biodiversity management. Against this background, the general objective of this research project was to contribute to the understanding of the dynamics of indigenous environmental knowledge in the Andean highlands of Peru and Bolivia by investigating how local medicinal knowledge is socially differentiated within rural communities, how it is transformed, and which external and internal factors influence these transformation processes. The project adopted an actor-oriented perspective and emphasized the concept of knowledge dialogue by analyzing the integration of traditional and formal medicinal systems within family therapeutic strategies. It also aimed at grasping some of the links between the dynamics of medicinal knowledge and the types of land use systems and biodiversity management. Research was conducted in two case study areas of the Andes, both Quechua-speaking and situated in comparable agro-ecological production belts - Pitumarca District, Department of Cusco (Southern Peruvian Highlands) and the Tunari National Park, Department of Cochabamba (Bolivian inner-Andean valleys). In each case study area, the land use systems and strategies of 18 families from two rural communities, their environmental knowledge related to medicine and to the local therapeutic flora, and an appreciation of the dynamics of this knowledge were assessed. Data were collected through a combination of disciplinary and participatory action-research methods. It was mostly analyzed using qualitative methods, though some quantitative ethnobotanical methods were also used. In both case studies, traditional medicine still constitutes the preferred option for the families interviewed, independently of their age, education level, economic status, religion, or migration status. Surprisingly and contrary to general assertions among local NGOs and researchers, results show that there is a revival of Andean medicine within the younger generation, who have greater knowledge of medicinal plants than the previous one, value this knowledge as an important element of their way of life and relationship with “Mother Earth” (Pachamama), and, at least in the Bolivian case, prefer to consult the traditional healer rather than go to the health post. Migration to the urban centres and the Amazon lowlands, commonly thought to be an important factor of local medicinal knowledge loss, only affects people’s knowledge in the case of families who migrate over half of the year or permanently. Migration does not influence the knowledge of medicinal plants or the therapeutic strategies of families who migrate temporarily for shorter periods of time. Finally, economic status influences neither the status of people’s medicinal knowledge, nor families’ therapeutic strategies, even though the financial factor is often mentioned by practitioners and local people as the main reason for not using the formal health system. The influence of the formal health system on traditional medicinal knowledge varies in each case study area. In the Bolivian case, where it was only introduced in the 1990s and access to it is still very limited, the main impact was to give local communities access to contraceptive methods and to vaccination. In the Peruvian case, the formal system had a much greater impact on families’ health practices, due to local and national policies that, for instance, practically prohibit some traditional practices such as home birth. But in both cases, biomedicine is not considered capable of responding to cultural illnesses such as “fear” (susto), “bad air” (malviento), or “anger” (colerina). As a consequence, Andean farmers integrate the traditional medicinal system and the formal one within their multiple therapeutic strategies, reflecting an inter-ontological dialogue between different conceptions of health and illness. These findings reflect a more general trend in the Andes, where indigenous communities are currently actively revalorizing their knowledge and taking up traditional practices, thus strengthening their indigenous collective identities in a process of cultural resistance.