Resistant starch in cassava products

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção, caracterização nutricional e utilização de farinhas e óleos de resíduos de peixes neotropicais em dietas para Tilápia do Nilo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização de hambúrguer elaborado com farinha de folhas de Moringa (Moringa oleífera Lam.)

The aim of this study was to determine the antioxidant activity of Moringa (Moringa oleifera Lam.) leaves flour in beef burger during storage for 120 days. Six hamburger formulations were processed: one control (without the use of additives), four with addition of Moringa leaves flour (0.10, 0.15, 0.20, and 0.25 g/100 g aggregate), and one with addition of synthetic antioxidant Propyl Gallate (0.01 g/100 g aggregate). The products were analyzed for their chemical composition with determinations of moisture, protein, dietary fiber, lipids, ash, carbohydrate, and caloric value after preparation. Microbiological and acceptance testing were performed at the beginning and after 120 days of storage. Determination of pH, instrumental color and lipid oxidation (TBARS) were performed at 1, 30, 60, 90 and 120 days of storage. All samples showed physical-chemical and microbiological tests in accordance with the Brazilian legislation. pH measurements were between 5.48 and 5.90; however, the intensity of red has changed according to the treatments and storage periods. The addition of Moringa leaves flour had no antioxidant effect on burgers, but its inclusion not only contributed to the improvement of nutritional quality, but also did not harm product acceptance.

Evaluation of the use of probiotic acid lactic bacteria in the development of chicken hambúrguer

The objective of this study was to investigate the effect of fermentation with Lactobacillus acidophilus CRL 1014 on the physicochemical, microbiological and sensory characteristics of a hamburger product like processed with chicken meat and okara flour, with reduction of curing salts. A mixture of ingredients containing 90% chicken meat and 10% okara flour was subjected to the following treatments: F1: fermented with Lactobacillus acidophilus; F2:75 mg nitrite/kg and fermented with Lactobacillus acidophilus; F3: 150 mg nitrite/kg and unfermented. The quality of the “hamburgers” was assessed by physical and chemical analysis (pH, cooking yield and shrinkage), chemical composition, microbiological tests (Salmonella spp., count of sulphite-reducing clostridia, staphylococos coagulase-positive, total coliforms and Escherichia coli) and sensory analysis (sensory acceptance and purchase intent). During the first six days of fermentation, there was a decrease in pH from approximately 6.33 to 5.10. All the samples showed the same chemical composition (p < 0.05). The fermentation process was observed to inhibit the multiplication of microorganisms of several groups: coagulasepositive staphylococci, sulphite-reducing clostridia, Salmonella spp. and E. coli. The different “hamburgers” formulations showed high scores for all the sensory attributes evaluated, without differing from each other (p < 0.05). The results showed that the use of L. acidophilus CRL 1014 enabled the production of a safe product, with good physicochemical and sensory characteristics, in the absence of curing salts.

Produção de amilases pelo cultivo em estado sólido de Rhizopus microsporus var. oligosporus e sua utilização na obtenção de xarope de glicose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito de parâmetros variáveis de fermentação sobre o crescimento celular e composição química do fermentado de batata-doce

This study aimed to evaluate the use of sweet potato as a substrate for the production of spirits. In order to promote an alternative technologically feasible, an experimental design was performed to minimize the operations of preparation, defining the most adequate conditions for the fermentation process. From sweet potato flour obtained by milling and dehydration process of the roots was carried out an enzymatic process of hydrolysis-saccharification of suspension of sweet potato flour with 18% dry matter. The hydrolyzate was used in the fermentation process which followed the 23 full factorial experimental design with central and axial points, and the independent variables were the concentration of reducing sugars, concentration of viable yeast and fermentation temperature. The dependent variables were viable cells, residual sugar, ethanol, glycerol and methanol. The dependent variables were quantified by liquid chromatography. The data analysis indicate that the best fermentation conditions among the tested conditions were: concentration of yeast 5 x 107-1 x 108 in number of viable cells, total reducing sugars from 12.5 to 13.5% and temperature between 33 -34ºC.

Composição química e propriedades de pasta de farinhas de mandioca

This work aimed to analyze the chemical composition and paste properties of cassava flours, from several producers and classifications, marked in different Brazilian cities. Flours were characterized to moisture, ash, fibers, protein, lipids, total sugars and starch. The paste properties were analyzed in RVA. The results showed significant differences to chemical components in cassava flours. The moisture ranged from 4.39 to 10.26, starch (82.19 to 88.90%), ash (0.48 to 1.07%), fiber (3.23 to 6.41%), protein (1.15 to 2.13%), total sugar (0.05 to 0.56%) and lipids (0.40 to 1.24). These differences can be due the variations of raw material and process. The paste properties of flours were different, with viscosity peak ranged from 73.33 to 387.08 RVU, breakdown (2.42 to 248.83RVU, final viscosity (154.92 to 275.5 RVU) and retrogradation tendency (50.75 to 132.5 RVU), showing the influence of kind of processing on flour viscosity.

Composição físico-química e propriedades tecnológicas da farinha de folhas de mandioca

Cassava leaves can be considered an important nutritional source when compared to other commonly consumed vegetables leaves. Cassava leaves have high levels of protein, fiber and minerals, and arestill underexplored due to the lack of information regarding the use of them as afood product, as well as, their use as an industrial raw material. The consumption of cassava leaves in fresh form is impractical due to the presence of cyanide, thereby it is required a pretreatment to be performed to reduce this component. The objective of this study was to produce and characterize the four made with cassava leaves as its chemical composition, color, indices of absorption and water solubility, and pasting properties, aiming to provide information of interest for possible application as an ingredient in the food industry. Cassava leaf flour showed low moisture content (6.6 %)and significant amounts of fiber (30.68 %), protein (23.00 %), and total carbohydrate (22.27%). Drying and milling processes allowed to obtain a flour with a low content of total cyanide (0.3 mg 100g-1 ), and the presence of vitamin C (56.6 mg 100g-1 ) and β –carotene (38 mg 100g- 1 ). The color analysis of cassava leaf flour showed low lightness with, predominantly, green and yellow pigments. The cassava leaf flour presented good solubility (14.85 %) and water absorption (6.87 g gel. g-1 ). Pasting properties showed a low peak of viscosity and a higher final viscosity with a retrogradation tendency, indicating a low capacity of this flour to form gel. The flour of cassava leaves can be a good source of nutrition when used as a food ingredient in soups and pasta. However, it is not indicated to products that require high gel formation.

Propriedades de pasta e térmicas de misturas instantâneas de farinha de soja, fécula e farelo de mandioca

The application of extrusion technology in the food industry has enabled the development of new commercial products of fast preparation, and maintaining the nutritional characteristics after the process. During this process there are changes in raw material due to the action of temperature, humidity and mechanical friction resulting in a modified product which can be used in various industrial applications. This work aimed to evaluate the effect of the composition of the raw material and operating conditions of the extrusion process on the properties of paste and thermal properties in the development of a functional instant flour of cassava and soybean. The results showed significant effects of all operating parameters on the rheological properties studied. The extruded flours showed no residual gelatinization enthalpy, suggesting that the starch in the samples was gelatinized. The experimental conditions of the smallest percentages of cassava residue (10%) and high soybean flour (25%) mixed with cassava starch, extrusion temperature of 75ºC and low screw speed (170rpm) leads to obtain instant flour with desirable characteristics.

Produção semissólida de metarhizium anisopliae e beauveria bassiana em diferentes substratos e efeito da radiação ultravioleta e da temperatura sobre propágulos desses entomopatógenos

The present study was aimed to evaluate different (semi-solid) media for the production of Metarhizium anisopliae and Beauveria bassiana propagules, and to evaluate the tolerance of these propagules to ultraviolet radiation and temperature. The experiments were performed at the Biological Control Laboratory of the Instituto Biológico at Campinas, São Paulo, Brazil. For both fungi, 6 repetitions were performed for each of the 17 treatments: corn starch, full rice, parboiled rice, type-1 rice, type-2 rice, oat flakes, canjiquinha [grits], wheat flour, raw cassava flour, yellow corn flour, special wheat flour, corn flour, corn in grains, cassava starch, soy in grains, crushed wheat, and turf. The viability analysis was done in plastic plates containing BDA. For the bioassays involving exposure to ultraviolet light and temperature, BDA was also used for viability analysis, and each treatment was exposed to the UV radiation for 0, 25 and 50 seconds, the temperature exposure being at 20, 25, 30 and 35º C. Using a Potter tower, 2 mL of fungus suspension from each treatment was inoculated to the Diatraea saccharalis caterpillars. Regarding the sporulation, the largest concentrations of M. anisopliae and B. bassiana were found for the treatments with parboiled rice, type-1 rice, type-2 rice, yellow corn flour, corn flour and crushed wheat. The viability of all treatments was superior to 94.00%. Also, the longer the duration of the exposition to the UV, the smaller the number of fertile conidia. At 35o C, a significant loss of conidia viability was observed, and all the treatments presented some level of virulence.

Aproveitamento da casca de banana na elaboração de barras de cereais: avaliação dos compostos bioativos, características físicas e sensoriais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

EC33-136 Corn in Nebraska

Corn is Nebraska's most important crop. Of the nearly 19 million acres under cultivation in the state, over 10 million acres or more than 50 percent is normally planted to corn. This is three times the acreage of wheat, four times that of oats, and ten times that of barley. The 10-year average acre yield of corn for this state is 25.8 bushels compared with 26.9 bushels for the entire United States. Nebraska, with an average annual crop of approximately 258 million bushels, usually ranks third among all states in the total production of corn, being exceeded by Iowa and Illinois. This 1933 extension circular discusses the importance of corn, seed, varieties of corn, freezing injury, testing seed corn, hybrid corn, soil fertility and rotation, cultural practices, harvesting and storing corn, power machinery in relation to costs in corn production, corn diseases and insects, and utilization of corn.

QUANTITATIVE TRAIT LOCI FOR AGRONOMIC AND END-USE QUALITY PERFORMANCE AND THE EFFECT OF SOILBORNE WHEAT MOSAIC VIRUS IN A HARD WINTER WHEAT POPULATION IN NEBRASKA

To better understand agronomic and end-use quality in wheat (Triticum aestivum L.) we developed a population containing 154 F6:8 recombinant inbred lines (RILs) from the cross TAM107-R7/Arlin. The parental lines and RILs were phenotyped at six environments in Nebraska and differed for resistance to Wheat soilborne mosaic virus (WSBMV), morphological, agronomic, and end-use quality traits. Additionally, a 2300 cM genome-wide linkage map was created for quantitative trait loci (QTL) analysis. Based on our results across multiple environments, the best RILs could be used for cultivar improvement. The population and marker data are publicly available for interested researchers for future research. The population was used to determine the effect of WSBMV on agronomic and end-use quality and for the mapping of a resistance locus. Results from two infected environments showed that all but two agronomic traits were significantly affected by the disease. Specifically, the disease reduced grain yield by 30% of susceptible RILs and they flowered 5 d later and were 11 cm shorter. End-use quality traits were not negatively affected but flour protein content was increased in susceptible RILs. The resistance locus SbmTmr1 mapped to 27.1 cM near marker wPt-5870 on chromosome 5DL using ELISA data. Finally, we investigated how WSBMV affected QTL detection in the population. QTLs were mapped at two WSBMV infected environments, four uninfected environments, and in the resistant and susceptible RIL subpopulations in the infected environments. Fifty-two significant (LOD≥3) QTLs were mapped in RILs at uninfected environments. Many of the QTLs were pleiotropic or closely linked at 6 chromosomal regions. Forty-seven QTLs were mapped in RILs at WSBMV infected environments. Comparisons between uninfected and infected environments identified 20 common QTLs and 21 environmentally specific QTLs. Finally, 24 QTLs were determined to be affected by WSBMV by comparing the subpopulations in QTL analyses within the same environment. The comparisons were statistically validated using marker by disease interactions. These results showed that QTLs can be affected by WSBMV and careful interpretation of QTL results is needed where biotic stresses are present. Finally, beneficial QTLs not affected by WSBMV or the environment are candidates for marker-assisted selection.

Melting Alpine Glaciers Enrich High-Elevation Lakes with Reactive Nitrogen

Alpine glaciers have receded substantially over the last century in many regions of the world. Resulting changes in glacial runoff not only affect the hydrological cycle, but can also alter the physical (i.e., turbidity from glacial flour) and biogeochemical properties of downstream ecosystems. Here we compare nutrient concentrations, transparency gradients, algal biomass, and fossil diatom species richness in two sets of high-elevation lakes: those fed by snowpack melt alone (SF lakes) and those fed by both glacial and snowpack meltwaters (GSF lakes). We found that nitrate (NO3-) concentrations in the GSF lakes were 1-2 orders of magnitude higher than in SF lakes. Although nitrogen (N) limitation is common in alpine lakes, algal biomass was lower in highly N-enriched GSF lakes than in the N-poor SF lakes. Contrary to expectations, GSF lakes were more transparent than SF lakes to ultraviolet and equally transparent to photosynthetically active radiation.Sediment diatom assemblages had lower taxonomic richness in the GSF lakes, a feature that has persisted over the last century. Our results demonstrate that the presence of glaciers on alpine watersheds more strongly influences NO3- concentrations in high-elevation lake ecosystems than any other geomorphic or biogeographic characteristic.

Prediction of apparent protein digestibility of ingredients and diets by in vitro pH-stat degree of protein hydrolysis with species-specific enzymes for juvenile Pacific white shrimp Litopenaeus vannamei

Aquafeed production faces global issues related to availability of feed ingredients. Feed manufacturers require greater flexibility in order to develop nutritional and cost-effective formulations that take into account nutrient content and availability of ingredients. The search for appropriate ingredients requires detailed screening of their potential nutritional value and variability at the industrial level. In vitro digestion of feedstuffs by enzymes extracted from the target species has been correlated with apparent protein digestibility (APD) in fish and shrimp species. The present study verified the relationship between APD and in vitro degree of protein hydrolysis (DH) with Litopenaeus vannamei hepatopancreas enzymes in several different ingredients (n = 26): blood meals, casein, corn gluten meal, crab meal, distiller`s dried grains with solubles, feather meal, fish meals, gelatin, krill meals, poultry by-product meal, soybean meals, squid meals and wheat gluten. The relationship between APD and DH was further verified in diets formulated with these ingredients at 30% inclusion into a reference diet. APD was determined in vivo (30.1 +/- 0.5 degrees C, 32.2 +/- 0.4%.) with juvenile L vannamei (9 to 12 g) after placement of test ingredients into a reference diet (35 g kg(-1) CP: 8.03 g kg(-1) lipid; 2.01 kcal g(-1)) with chromic oxide as the inert marker. In vitro DH was assessed in ingredients and diets with standardized hepatopancreas enzymes extracted from pond-reared shrimp. The DH of ingredients was determined under different assay conditions to check for the most suitable in vitro protocol for APD prediction: different batches of enzyme extracts (HPf5 or HPf6), temperatures (25 or 30 degrees C) and enzyme activity (azocasein): crude protein ratios (4 U: 80 mg CP or 4 U: 40 mg CP). DH was not affected by ingredient proximate composition. APD was significantly correlated to DH in regressions considering either ingredients or diets. The relationships between APD and DH of the ingredients could be suitably adjusted to a Rational Function (y = (a + bx)/(1 + cx + dx2), n = 26. Best in vitro APD predictions were obtained at 25 degrees C, 4 U: 80 mg CP both for ingredients (R(2) = 0.86: P = 0.001) and test diets (R(2) = 0.96; P = 0.007). The regression model including all 26 ingredients generated higher prediction residuals (i.e., predicted APD - determined APD) for corn gluten meal, feather meal. poultry by-product meal and krill flour. The remaining test ingredients presented mean prediction residuals of 3.5 points. A model including only ingredients with APD>80% showed higher prediction precision (R(2) = 0.98: P = 0.000004; n = 20) with average residual of 1.8 points. Predictive models including only ingredients from the same origin (e.g., marine-based, R(2) = 0.98; P = 0.033) also displayed low residuals. Since in vitro techniques have been usually validated through regressions against in vivo APD, the DH predictive capacity may depend on the consistency of the in vivo methodology. Regressions between APD and DH suggested a close relationship between peptide bond breakage by hepatopancreas digestive proteases and the apparent nitrogen assimilation in shrimp, and this may be a useful tool to provide rapid nutritional information. (C) 2009 Elsevier B.V. All rights reserved.