男性不育患者精浆中表皮生长因子含量测定

为了探讨表皮生长因子与男性精子发生的关系, 采用放射免疫学方法对正常男性精浆中表皮生长因子 (EGF) 含量进行测定, 结果二组之间EGF 含量经t′检验差异有显著性( P < 0105) , 提示EGF 可能参与了男性生殖 系统中精子发生的调控。

涡鞭毛虫类的染色质碱性蛋白研究及其进化地位的重新认识

通过对涡鞭毛虫这一特殊生物类群的染色质碱性蛋白研究的综述,并结合作者近来的工作和国际上有关的最新进展,对这类生物染色质碱性蛋白的特殊性和多样性进行了阐述。在此基础上对这类生物进化地位及系统发育进行了探讨。认为其染色质碱性蛋白不应是组蛋白的祖先蛋白,相反,它们是一些由于次生的原因而替代了组蛋白的碱性蛋白,并由于替代蛋白的不同而形成了它们的次生多样性;其染色质的特性即是由此而形成的与真细菌类核体的趋同相似性;其进化地位并非以前所认为的位于原核生物向真核生物的过渡环节,这类生物应是在真核细胞的基础上由于次生原因而形成的特殊类群;其系统发育也正是这一次生物进化过程的反映。

Heat source modelling and natural ventilation efficiency

We compare natural ventilation flows established by a range of heat source distributions at floor level. Both evenly distributed and highly localised line and point source distributions are considered. We demonstrate that modelling the ventilation flow driven by a uniformly distributed heat source is equivalent to the flow driven by a large number of localised sources. A model is developed for the transient flow development in a room with a uniform heat distribution and is compared with existing models for localised buoyancy inputs. For large vent areas the flow driven by localised heat sources reaches a steady state more rapidly than the uniformly distributed case. For small vent areas there is little difference in the transient development times. Our transient model is then extended to consider the time taken to flush a neutrally buoyant pollutant from a naturally ventilated room. Again comparisons are drawn between uniform and localised (point and line) heat source geometries. It is demonstrated that for large vent areas a uniform heat distribution provides the fastest flushing. However, for smaller vent areas, localised heat sources produce the fastest flushing. These results are used to suggest a definition for the term 'natural ventilation efficiency', and a model is developed to estimate this efficiency as a function of the room and heat source geometries. © 2006 Elsevier Ltd. All rights reserved.

滇池控藻围隔中水生植物和浮游藻类对不同形态铁浓度的影响

运用围隔试验来研究围隔生态系统内浮游藻类的组成和数量以及水生植物变化对不同形态铁浓度的影响,再反过来探讨微量元素铁在蓝藻水华暴发过程中对水生植物和浮游藻类生态生理的作用,从而为探索治理蓝藻水华的新途径提供基础证据。从2003年6月至10月,定期采样测定了控藻围隔水体中的亚铁、颗粒态铁(>0.22μm)、小胶体态铁(0.22～0.025μm)、溶解态铁(<0.025μm)的浓度和叶绿素a的浓度,同时对浮游藻类进行了组成鉴定和细胞计数。结果表明,不同形态的铁之间是可以相互转化的,胶体态铁比颗粒态铁活跃,是溶解

福尔马林固定白鱀豚标本DNA提取及其遗传多样性的初步研究

福尔马林固定标本是宝贵的遗传资源,但是如何有效利用其中的遗传信息一直存在问题。本文尝试从标本预处理、消化、PCR扩增各方面综合考虑和优化改进,成功提取并扩增21头福尔马林固定白豚标本线粒体DNA控制区410bp片段。采用了3种预处理方法尽量去除固定标本中残存的甲醛,从试验结果来看,从酒精梯度+临界点干燥处理的标本中提取的DNA在扩增时具有明显优势。通过蛋白酶K消化过程中对于酶的浓度、温浴时间的比较试验,发现随着采用大幅提高酶浓度、延长消化时间等高强度的蛋白酶消化操作后,DNA的质量和产量均得到显著提高。

Characterization of the surface acoustic wave devices based on ZnO/nanocrystalline diamond structures

Nanocrystalline ZnO films with strong (0002) texture and fine grains were deposited onto ultra-nanocrystalline diamond (UNCD) layers on silicon using high target utilization sputtering technology. The unique characteristic of this sputtering technique allows room temperature growth of smooth ZnO films with a low roughness and low stress at high growth rates. Surface acoustic wave (SAW) devices were fabricated on ZnO/UNCD structure and exhibited good transmission signals with a low insertion loss and a strong side-lobe suppression for the Rayleigh mode SAW. Based on the optimization of the layered structure of the SAW device, a good performance with a coupling coefficient of 5.2% has been realized, promising for improving the microfluidic efficiency in droplet transportation comparing with that of the ZnO/Si SAW device. An optimized temperature coefficient of frequency of -23.4 ppm°C-1 was obtained for the SAW devices with the 2.72 μm-thick ZnO and 1.1 μm-thick UNCD film. Significant thermal effect due to the acoustic heating has been redcued which is related to the temperature stability of the ZnO/UNCD SAW device. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Stiffness of clays and silts: Normalizing shear modulus and shear strain

An analysis is presented of a database of 67 tests on 21 clays and silts of undrained shear stress-strain data of fine-grained soils. Normalizations of secant G in terms of initial mean effective stress p9 (i.e., G=p9 versus log g) or undrained shear strength cu (i.e., G=cu versus log g) are shown to be much less successful in reducing the scatter between different clays than the approach that uses the maximum shear modulus,Gmax, a technique still not universally adopted by geotechnical researchers and constitutive modelers. Analysis of semiempirical expressions forGmax is presented and a simple expression that uses only a void-ratio function and a confining-stress function is proposed. This is shown to be superior to a Hardin-style equation, and the void ratio function is demonstrated as an alternative to an overconsolidation ratio (OCR) function. To derive correlations that offer reliable estimates of secant stiffness at any required magnitude of working strain, secant shear modulus G is normalized with respect to its small-strain value Gmax, and shear strain g is normalized with respect to a reference strain gref at which this stiffness has halved. The data are corrected to two standard strain rates to reduce the discrepancy between data obtained from static and cyclic testing. The reference strain gref is approximated as a function of the plasticity index.Aunique normalized shear modulus reduction curve in the shape of a modified hyperbola is fitted to all the available data up to shear strains of the order of 1%. As a result, good estimates can be made of the modulus reduction G/Gmax ±30% across all strain levels in approximately 90% of the cases studied. New design charts are proposed to update the commonly used design curves. © 2013 American Society of Civil Engineers.

Independent Transport and Sorting of Functionally Distinct Protein Families in Tetrahymena thermophila Dense Core Secretory Granules

Dense core granules (DCGs) in Tetrahymena thermophila contain two protein classes. Proteins in the first class, called granule lattice (Grl), coassemble to form a crystalline lattice within the granule lumen. Lattice expansion acts as a propulsive mechanism during DCG release, and Grl proteins are essential for efficient exocytosis. The second protein class, defined by a C-terminal beta/gamma-crystallin domain, is poorly understood. Here, we have analyzed the function and sorting of Grt1p (granule tip), which was previously identified as an abundant protein in this family. Cells lacking all copies of GRT1, together with the closely related GRT2, accumulate wild-type levels of docked DCGs. Unlike cells disrupted in any of the major GRL genes, Delta GRT1 Delta GRT2 cells show no defect in secretion, indicating that neither exocytic fusion nor core expansion depends on GRT1. These results suggest that Grl protein sorting to DCGs is independent of Grt proteins. Consistent with this, the granule core lattice in Delta GRT1 Delta GRT2 cells appears identical to that in wild-type cells by electron microscopy, and the only biochemical component visibly absent is Grt1p itself. Moreover, gel filtration showed that Grl and Grt proteins in cell homogenates exist in nonoverlapping complexes, and affinity-isolated Grt1p complexes do not contain Grl proteins. These data demonstrate that two major classes of proteins in Tetrahymena DCGs are likely to be independently transported during DCG biosynthesis and play distinct roles in granule function. The role of Grt1p may primarily be postexocytic; consistent with this idea, DCG contents from Delta GRT1 Delta GRT2 cells appear less adhesive than those from the wild type.

High efficiency and broad bandwidth grating coupler between nanophotonic waveguide and fibre

A high efficiency and broad bandwidth grating coupler between a silicon-on-insulator (SOI) nanophotonic waveguide and fibre is designed and fabricated. Coupling efficiencies of 46% and 25% at a wavelength of 1.55 mu m are achieved by simulation and experiment, respectively. An optical 3 dB bandwidth of 45 nm from 1530 nm to 1575 nm is also obtained in experiment. Numerical calculation shows that a tolerance to fabrication error of 10 nm in etch depth is achievable. The measurement results indicate that the alignment error of +/-2 mu m results in less than 1 dB additional coupling loss.