Alterações dimensionais em pacientes submetidos à expansão rápida da maxila com aparelho do tipo Haas

The maxillary atresia is a alteration in the transverse dimension that can result in a unilateral or bilateral crossbite. For correction of atresia of the upper dental arch appliances with the intent to expand the arch of orthopedic or orthodontic manner are used, obtaining across-compatibility between the dental arches. The purpose of this study was to evaluate the dimensional changes of the maxillary in patients in the mixed dentition with atresia in the upper dental arch, using occlusal radiographs taken before, after rapid maxillary expansion and after removal of the appliance. Methods: the sample consisted of 35 patients who used the appliance type conventional Haas, in the mixed dentition, according to the standard protocol for installation, activation, containment and removal of the appliances rapid maxillary expansion. Results: the results confirm that the suture opening occurs in greater quantities in the anterior (4.3 mm) than posterior to (3.74 mm), representing a triangular opening of 7 degrees on average with the posterior opening 87% of the quantity of anterior opening. The molars region expanded about 5 mm, and the base bone 3.7 mm, representing a 74% bone expansion of the expansion teeth.

Análise tomográfica da articulação temporomandibular no tratamento com Herbst em adulto jovem

Class II malocclusion features a high prevalence in Brazil, being considered as a routine in orthodontic clinics. A number of appliances are shown in the literature in order to correct Class II malocclusion with mandibular retrusion. Herbst´s fixed functional appliance, idealized by Emil Herbst (1905) and reintroduced, in the 1980´s, by Hans Pancherz is highlighted for maintaining the mandible continuously advanced, showing a shorter active treament time, an immediate esthetic impact on the facial profile, as well as requiring no patient´s commitment. Recent researches indicate the use of this appliance in individuals after pubertal growth surge. The aim of the present study is to show the orthodontics practitioner the option to use this appliance so as to treat Class II in individuals after the growth surge, obtaining satisfactory outcomes and further Class II correction.

Aparelho de Thurow modificado e aparelho ortodôntico fixo no tratamento da classe II com mordida aberta anterior

This work had aim to present two clinical cases with open bite Class II malocclusion that treated in the phase of the mixed dentition with the modified Thurow appliance and in the permanent dentition with fixed appliance. The dentoskeletal effects of these appliances were carefully analyzed with the aid of metallic implants inserted in both maxilla and mandible. The correction of the malocclusion and the improvement of the skeletal, dental and facial relationship were observed in both cases. The modified Thurow appliance followed by fixed-appliance as a two-phase treatment protocol revealed to be an effective treatment approach for the two young people that initially presented a Class II division 1 malocclusion associated to anterior open bite presented.

Efeitos esqueléticos e dentários decorrentes da expansão rápida maxilar

This study evaluated the maxillary transversal changes caused by the rapid maxillary expansion (RME) accomplished by Hyrax appliance. Sixteen children from both genders were selected and treated, with ages between 7.7 to 10.8 years, who presented unilateral or bilateral posterior crossbite. Postero-anterior radiographs were taken at the beginning of the treatment, end and post-retention period. The treatment promoted an average opening of 8.8 mm of IMD (intermolar distance), 2.33 mm of IAD (interapex distance) and none of IID (interincisal distance). At the end of retention period, relapse was observed, with a decrease of 4.3 mm of IMD, 1.23 mm of IAD, a non-significant enlargement of IID (0,38 mm).These results confirm the significant influence of Hyrax appliance on transverse dimensions, represented by enlargement of IMD and IAD and its effectiveness to solve posterior crossbites.

Estabilidade oclusal a longo prazo de Classe II, divisão 1, após tratamento com extração de pré-molares

Patients are looking for esthetic and functional changes when seeking orthodontic treatment and expect the remaining of a stable occlusion. Occlusion stability is one of the goals of the orthodontist; however, dental relationships changes in long-term can occur leading to a relapse of the treatment. Teeth and shape of arches tend to return to the original form, been the retention phase important after the appliance removal, even after several years of post-treatment. This article approaches a submission of a clinical case of Class II division 1 treated with extraction of premolars analyzing its long-term stability.

Sistema Essix MTM: uma alternativa estética para a movimentação

The increased interest in orthodontics by adults has led companies to develop new treatment alternatives that use less visible and more aesthetic orthodontic appliances. The aesthetic aligners stand out among the treatment options that attend these expectations. This paper presented some relevant aspects of these devices, as well as two cases treated with Essix MTM (Dentsply) system, in which all aesthetic and functional objectives proposed treatment have been achieved. The results of this study support the idea that, when properly indicated, aesthetic aligners are a viable treatment option within the clinical routine of the orthodontist.

Tratamento da má-oclusão de classe II divisão 1 de Angle, com aparelho de Herbst splint metálico seguido de aparelho fixo, na dentição permanente

The Herbst appliance is currently one of the most used appliances for the correction of Class II division 1 with mandibular retrusion. When used in peak, or just after the peak of growth it can result in some skeletal gain, which is favorable to the correction of anteroposterior discrepancy with effective and stable results. This article aims to report a case of a patient with malocclusion Class II division 1 with mandibular retrusion, associated with maxillary protusion, treated in two stages: with Herbst splint metallic appliance followed by fixed appliance orthodontic treatment.

Utilização do bite block para correção da mordida aberta anterior

Bite block is a functional orthodontic appliance that promotes relative intrusion or dental eruption inhibition. The purpose of this study is to present the effects of bite block on the treatment of an open bite case report.

Variáveis que afetam o procedimento de colagem direta ortodôntica: braquetes e materiais adesivos

Following the introduction of the acid-etching technique in enamel surface, direct attachment of orthodontic appliances on the surface of the tooth and/or restorations became a routine procedure in the assembly of the fixed devices. The attainment of a success result is related to the criterion attention to the details and the steps of the bonding technique, as well as, to the knowledge of the characteristics of the adhesive materials and orthodontic brackets. This paper presents some aspects of various types of brackets and adhesives materials.

Descrição do aparelho VABB (Vertically Activated Bite Block) para o tratamento da mordida aberta anterior

Nowadays, the correction of skeletal vertical dysplasia is considered a great challenge in Orthodontics. The skeletal open bite treatment presents limitations related to vertical growth pattern, the extension of open bite and especially the stability, which is very questioned. The treatment of skeletal open bite is mostly realized by the inhibition of vertical alveolar posterior development (relative intrusion) or absolute intrusion of posterior teeth, through vertical forces, generated by the action of masticatory muscles. The purpose of this article is to present a new appliance for the treatment of skeletal open bite, the VABB (Vertically Activated Bite Block) or modified Bite Block, whose action mechanism is to limit the vertical development of the molars, by the action of facial muscles and two bilateral expansion screws that provide a counterclockwise rotation of the mandible. It will also be presented a clinical case and the technical steps for the construction of this appliance.

Ertty System®: distalização segmentar

Introduction: Ertty System® is an intraoral system of biomechanical forces to move teeth anteroposteriorly. The application of forces on this system results in the distalization of the molar and all lateral segment in the side to be distalized, including premolars and canine, resulting in alveolar bone remodeling. This system is indicated to correct uni- or bilateral maxillary dental Class II malocclusion in permanent dentition both in children and adults. It is contraindicated in case of skeletal asymmetries, protrusion of maxillary and mandibular teeth, skeletal Class II and Class II subdivision malocclusions with mandibular midline deviation. This study describes Ertty System® and presents two clinical cases treated using this system. The two female patients presented with Class II malocclusion subdivision and maxillary midline deviation. Results: It was achieved correct alignment and leveling, Class I dental relation and correction of upper midline. Conclusion: The success and stability of results confirmed diagnosis and treatment adequacy.

Tratamento da má oclusão de classe II com aparelho Jasper Jumper

The Jasper Jumper appliance was developed as a fixed orthopedic device that is connected to the upper and lower leveling arches to promote the Class II correction by restricting the maxillary growth (headgear effect), mandibular growth inducement (activator effect) and dentoalveolar changes.

Tratamento da má oclusão de classe II, divisão 1, na dentadura mista com apareljo extrabucal removivel

Extraoral appliances represent an alternative for correction of Class II malocclusions. The application of external force leads to tooth movement and influence the growth of the maxillomandibular complex. This article aims to present the removable headgear as an adjuvant in the treatment of Class II division 1 in the mixed dentition.

Tratamento ortodôntico lingual individualizado com o sistema Incognito

Introduction: The orthodontic treatment using lingual brackets has been desired by adult patients for esthetic factors. In this paper it is described the clinical steps of an orthodontic treatment using Incognito™ system, individualized lingual brackets and archwires designed by CAD/CAM technology. Methods: The presented case describes the treatment of a patient with mesofacial growth pattern,Class I malocclusion, with mandibular crowding and diastema between the upper central incisors, treated using 100% individualized lingual brackets. Results: After treatment, the molar relation of Class I was kept, the spaces between upper central incisors were closed and mandibular crowding corrected. Conclusion: This case report demonstrated the efficiency of the new method for lingual orthodontic treatment.

A survey of the management of patients with temporomandibular disorders by general dental practitioners in southern Brazil

Purpose: Temporomandibular disorders (TMD) are recognized as one of the mostcontroversial topics in dentistry, despite the fact that both basic science and clinicalresearchers have currently reached some degree of consensus. This study aimed toconduct a questionnaire-based survey about the management of TMD patients bygeneral dental practitioners (GDPs).Materials and Methods: One hundred fifty-one GDPs with a private practice in a cityof southern Brazil were included, independent of school of origin, gender, graduationyear, and curriculum content. All participants were administered a questionnaire aboutthe management of patients with TMD, and the responses were analyzed by binomialand chi-square tests (α = 0.05).Results: Of the GDPs, 88.7% received TMD patients, who were primarily diagnosedon the basis of medical history (36.6%) or physical examination (30.4%). Of these,65.4% referred the patients elsewhere, primarily to specialists in occlusion (36.1%) ororthodontics (29.7%). Occlusal splinting was the most commonly used managementmodality (20.8%), followed by occlusal adjustment (18.1%) and pharmacotherapy(16.6%). Splints were fabricated in maximum habitual intercuspation or centric re-lation depending on individual patient (54.8%). The hard stabilization form was themost common type of appliance used (35.0%). Moreover, 73.8% of the GDPs didnot employ semi-adjustable articulators, and 69.5% adjusted the appliances at thetime of fixing. The duration of splint use and the frequency of follow-up were con-sidered patient dependent by 62.1% and 72.8%, respectively. GDPs considered thetwo major TMD etiologic categories as multifactorial (20.8%) and occlusion (19.9%).Multidisciplinary medical and dental treatment was considered necessary by 97.9%.Conclusions: The evaluated general dental practitioners manage TMD patients ac-cording to international guidelines.