热察绥地区过去300年土地利用覆被变化

The historical land use and land cover changes is one of the key issues in LUCC research. However, the achievement of China in this field doesn't match her position in the world yet. And the reliability of the quantitive records in Chinese historical literature, the basic data for historical land use research, has been doubted. This research focuses on Re-Cha-Sui, a typical area for the farming-pastoral region in the north of China, to make a detailed case study in this field. Based on a deep mining and calibration on the data from massive historical documents and land-use surveys, the author gives a detailed analysis on the administrative region evolution, historical population dynamics, reclamation policy, and the land statistic system. According to textual researches, parallel validation and physical geographical analysis, a unified land use series for recent 300 years, which founded on the results of modern land-use surveys, is constructed. And the thematic maps on the cultivation index for different counties in several temporal sections are plotted. Based on the endeavor above, the dynamic of forest and steppe is reconstructed as well. The temporal-spatial patterns of land use/land cover changes in the area is analyzed. And the influence of different driving forces are discussed. The main conclusions of the research are as followed: 1. The quantitive records in literatures on Re-Cha-Sui area are reflection of real amounts of croplands. It is practical to reconstruct a result comparable with the modern land-use surveys, based of a deep mining and considerate validation on historical documents. The unexceptional negative attitude towards the numerical records in historical documents is unnecessary. 2. In recent 300 years, 3 climax of reclamation appeared in Re-Cha-Sui area and altered the pure pastoral area into a farming-pastoral region. The interval were respectively the early time till mid time of the Qing dynasty, the end of the Qing dynasty till early time of the Republic of China(ROC), and the time after A.D. 1949. After the first expansion, the area of cropland in this region reached 2.0 million ha. Among them, Guisui area, which was most densely cultivated, had a cultivation index over 30%, which is similar with modern situation. The second expansion covered broader area, and the amount of cropland reached 3.5 million ha. The increase of farming area after 1949 is due to the recultivation of abandoned farmland. The current area of cropland in this region is 5.6 million ha. In the southern area where the land was reclaimed early, the amount on of the cropland has some fluctuation in 300 years. While in the new reclaimed area in the north, the area of cropland has kept the trend of increasing. 3. Due to the different natural conditions, most forests in Re-Cha-Sui area distribute in the mountain area of North Hebei province, and the upland of West Liaoning province, especially the former, which has a forest coverage near 70%. However, most of these forests were destroyed before the end of the Qing dynasty. In 1949, the natural forest near Chengde was nearly cleared up. They were partly renewed after 1949 due to plantation. 4. In the steppe zone such as northern Rehe, Suiyuan and Chahar, the area of steppe has a negative correlation with that of cropland. With the expansion of cropland, the percentage of steppe has shrunk from over 80% to 53%. In the mountain area of North Hebei province, steppe expanded with the shrinkage of forest, though cropland was expanding. The percentage once reached 60%, and then fell with the renew of forest. However, in the upland of West Liaoning province, the steppe shrink slowly from original 50% to current 26%, with the expansion of cropland. 5. The land use and land cover change in Re-Cha-Sui area in recent 300 years is driven by various factors, including human dimensions such as population, policy of the government, disorder of the society, cultural tradition, and natural factors such as climate change and natural disasters. Among them, pressure from surplus population is the basic driving force.

Nie tylko Dzierżon: wprowadzenie do bibliografii piśmiennictwa pszczelniczego na Śląsku

Zadaniem artykułu jest ukazanie dorobku piśmiennictwa pszczelniczego na Śląsku. Pretekstem do poruszenia tego tematu jest przypadająca w 2011 roku dwusetna rocznica urodzin wybitnego pszczelarza Jana Dzierżona. Osoba i dokonania najsłynniejszego chyba w świecie Ślązaka do tego stopnia zdominowały historię pszczelarstwa tego regionu, że właściwie bardzo niewiele mówi się o dorobku innych działających aktywnie śląskich pszczelarzach praktykach i publicystach. Tymczasem dorobek ten jest imponujący. W części pierwszej artykułu przypomniano Nickela Jacoba ze Szprotawy, autora pierwszej wydanej na Śląsku książki pszczelarskiej, uznanego jednocześnie za ojca niemieckiej bibliografii pszczelarskiej. Wśród pionierów niemieckiej literatury fachowej dotyczącej pszczół znajduje się też Johann Coler ze Złotoryi. W XVIII wieku swą działalność praktyczną i publicystyczną w znacznej mierze związali ze Śląskiem Łużyczanin Adam Gottlieb Schirach i Niemiec Johann Riem. W dziełach innych autorów z zakresu gospodarstwa wiejskiego pojawiają się również fragmenty poświęcone pszczelarstwu. Dorobek swych poprzedników wzbogacił i swą działalnością rozsławił śląskie pszczelarstwo ksiądz dr Jan Dzierżon, odkrywca partenogenezy, konstruktor nowoczesnego ula, autor licznych publikacji. „Księciu pszczół” poświęcona została druga część artykułu. Przedstawiono w niej pokrótce jego życie i działalność, dzieje walki o uznanie teorii partenogenezy, ogromny dorobek publicystyczny. Wskazano jednocześnie na brak opracowania pełnej bibliografii podmiotowej. Dzierżon był wydawcą jednego z pierwszych na Śląsku czasopism pszczelarskich. Dorobek śląskiego czasopiśmiennictwa pszczelarskiego jest bogaty i dziwi fakt, że właściwie w bardzo małym dotychczas stopniu został poznany. Część trzecią poświęcono niemieckim i polskim czasopismom pszczelarskim wydawanym na Śląsku. Uwzględniono tutaj tytuły samoistne oraz dodatki. W podsumowaniu wykazano, że we wszystkich obszarach bibliografia piśmiennictwa śląskiego wymaga kompleksowego rozpoznania. Stan opracowania piśmiennictwa pszczelarskiego na Śląsku stanowi w pewnej mierze odbicie stanu bibliografii tego zagadnienia na ziemiach polskich.

The ecology of the Irish stoat

The Irish stoat, Mustela erminea hibernica (Thomas and Barrett-Hamilton), has been regarded as an intermediate between the British stoat and the weasel. In this study Irish stoats, mainly from road casualties, were collected and studied. A small number were also live-trapped and radio-tracked. Thus information was gathered on the stoat’s ecology, in particular its form (size and coat colours), reproduction, food habits, parasites, habitat utilisation mortality and predation. The Irish stoats studied were clearly not intermediate in size between British stoats and weasels. They showed considerable size overlap with British stoats, and marked size variation within Ireland. It is argued that size of stoats is determined by food supply early in life. The ventral coat pattern of Irish stoats is apparently unique in the Palaearctic, being similar to that of some stoats found on the west coast of North America. It is argued that this is an example of parallel evolution resulting from adaptation to similar climatic conditions. The stoats were reproductively active in spring and summer. Food consisted mainly of rabbits, but rats, birds, shrews mice and voles were also consumed. Mites were the most numerous ectoparasites, followed by lice, ticks and fleas. Damage by the parasitic nematode Skrjabingylus nasicola was found more frequently in female stoat skulls. Stoats were frequently found in a variety of habitats, both open and wooded. Some of the radio-tracked stoats climbed trees. Dens used were often rat holes. Only one home range, that of a breeding female, was considered to have been accurately measured. It was 22 ha. in size. Mortality is known to have been caused by road accidents and domestic carnivores. It is argued that predation by raptorial birds is important to stoat populations. Results of this study are compared with information available from elsewhere.

Predicting organic acid concentration from UV/vis spectrometry measurements - A comparison of machine learning techniques

The concentration of organic acids in anaerobic digesters is one of the most critical parameters for monitoring and advanced control of anaerobic digestion processes. Thus, a reliable online-measurement system is absolutely necessary. A novel approach to obtaining these measurements indirectly and online using UV/vis spectroscopic probes, in conjunction with powerful pattern recognition methods, is presented in this paper. An UV/vis spectroscopic probe from S::CAN is used in combination with a custom-built dilution system to monitor the absorption of fully fermented sludge at a spectrum from 200 to 750 nm. Advanced pattern recognition methods are then used to map the non-linear relationship between measured absorption spectra to laboratory measurements of organic acid concentrations. Linear discriminant analysis, generalized discriminant analysis (GerDA), support vector machines (SVM), relevance vector machines, random forest and neural networks are investigated for this purpose and their performance compared. To validate the approach, online measurements have been taken at a full-scale 1.3-MW industrial biogas plant. Results show that whereas some of the methods considered do not yield satisfactory results, accurate prediction of organic acid concentration ranges can be obtained with both GerDA and SVM-based classifiers, with classification rates in excess of 87% achieved on test data.

Rapid changes in the level of Kluane Lake in Yukon Territory over the last millennium

The level of Kluane Lake, the largest lake in Yukon Territory, was lower than at present during most of the Holocene. The lake rose rapidly in the late seventeenth century to a level 12 m above present, drowning forest and stranding driftwood on a conspicuous high-stand beach, remnants of which are preserved at the south end of the lake. Kluane Lake fell back to near its present level by the end of the eighteenth century and has fluctuated within a range of about 3 m over the last 50 yr. The primary control on historic fluctuations in lake level is the discharge of Slims River, the largest source of water to the lake. We use tree ring and radiocarbon ages, stratigraphy and sub-bottom acoustic data to evaluate two explanations for the dramatic changes in the level of Kluane Lake. Our data support the hypothesis of Hugh Bostock, who suggested in 1969 that the maximum Little Ice Age advance of Kaskawulsh Glacier deposited large amounts of sediment in the Slims River valley and established the present course of Slims River into Kluane Lake. Bostock argued that these events caused the lake to rise and eventually overflow to the north. The overflowing waters incised the Duke River fan at the north end of Kluane Lake and lowered the lake to its present level. This study highlights the potentially dramatic impacts of climate change on regional hydrology during the Little Ice Age in glacierised mountains. © 2006 University of Washington.

Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC)

In this study, 39 sets of hard turning (HT) experimental trials were performed on a Mori-Seiki SL-25Y (4-axis) computer numerical controlled (CNC) lathe to study the effect of cutting parameters in influencing the machined surface roughness. In all the trials, AISI 4340 steel workpiece (hardened up to 69 HRC) was machined with a commercially available CBN insert (Warren Tooling Limited, UK) under dry conditions. The surface topography of the machined samples was examined by using a white light interferometer and a reconfirmation of measurement was done using a Form Talysurf. The machining outcome was used as an input to develop various regression models to predict the average machined surface roughness on this material. Three regression models - Multiple regression, Random Forest, and Quantile regression were applied to the experimental outcomes. To the best of the authors’ knowledge, this paper is the first to apply Random Forest or Quantile regression techniques to the machining domain. The performance of these models was compared to each other to ascertain how feed, depth of cut, and spindle speed affect surface roughness and finally to obtain a mathematical equation correlating these variables. It was concluded that the random forest regression model is a superior choice over multiple regression models for prediction of surface roughness during machining of AISI 4340 steel (69 HRC).

Biomass-derived oxymethylene ethers as diesel additives: A techno-economic assessment

Conversion of agricultural biomass such as wood chips, wheat straw and forest residue for the production of fuels can help in reducing GHG emissions since they are considered as nearly carbon neutral. Around the world there is a significant amount of forest and agricultural-biomass available which could be used for the production of liquid fuels that can be blended with the petroleum-based diesel. Oxymethylene ethers (OMEs) can be derived from biomass via gasification, water-gas shift reaction and methanol production. The addition of OMEs to conventional diesel fuel has great potential to reduce soot formation during the combustion in diesel engines. Unlike methanol and dimethyl ether (DMM) which can also reduce soot formation, the physical properties of OMEs allow the use in modern diesel engines without significant change of the engines infrastructure. In this study, a detailed and data intensive process simulation model was developed to simulate all the unit operations involved in the production of OMEs from biomass. The unit operation considered include biomass drying, gasification, gas cleaning, water gas shift reaction, methanol production and OMEs synthesis. The simulation results were then utilized to conduct a detailed techno-economic assessment study of the whole biomass conversion chain to determine the most attractive pathways for OMEs production. Our recent study shows that the key parameters affecting the OMEs production are equivalence ratio, H2/CO ratio and optimal air flow. Overall, the cost of production ($/liter) of OMEs from different biomass feedstock in Alberta will be determined

Biomass fly ash incorporation in cement based materials

In recent years, pressures on global environment and energy security have led to an increasing demand on renewable energy sources, and diversification of Europe’s energy supply. Among these resources the biomass could exert an important role, since it is considered a renewable and CO2 neutral energy resource once the consumption rate is lower than the growth rate, and can potentially provide energy for heat, power and transports from the same installation. Currently, most of the biomass ash produced in industrial plants is either disposed of in landfill or recycled on agricultural fields or forest, and most times this goes on without any form of control. However, considering that the disposal cost of biomass ashes are raising, and that biomass ash volumes are increasing worldwide, a sustainable ash management has to be established. The main objective of the present study is the effect of biomass fly ashes in cement mortars and concretes in order to be used as a supplementary cementitious material. The wastes analyzed in the study were collected from the fluidized bed boilers and grate boilers available in the thermal power plants and paper pulp plants situated in Portugal. The physical as well as chemical characterisations of the biomass fly ashes were investigated. The cement was replaced by the biomass fly ashes in 10, 20 and 30% (weight %) in order to investigate the fresh properties as well as the hardened properties of biomass fly ash incorporated cement mortar and concrete formulations. Expansion reactions such as alkali silica reaction (ASR), sulphate attack (external and internal) were conducted in order to check the durability of the biomass fly ash incorporated cement mortars and concretes. Alternative applications such as incorporation in lime mortars and alkali activation of the biomass fly ashes were also attempted. The biomass fly ash particles were irregular in shape and fine in nature. The chemical characterization revealed that the biomass fly ashes were similar to a class C fly ash. The mortar results showed a good scope for biomass fly ashes as supplementary cementitious materials in lower dosages (<20%). The poor workability, concerns about the organic content, alkalis, chlorides and sulphates stand as the reasons for preventing the use of biomass fly ash in high content in the cement mortars. The results obtained from the durability tests have shown a clear reduction in expansion for the biomass fly ash mortars/concretes and the binder blend made with biomass fly ash (20%) and metakaolin (10%) inhibited the ASR reaction effectively. The biomass fly ash incorporation in lime mortars did not improve the mortar properties significantly though the carbonation was enhanced in the 15-20% incorporation. The biomass fly ash metakaolin blend worked well in the alkali activated complex binder application also. Portland cement free binders (with 30-40 MPa compressive strength) were obtained on the alkali activation of biomass fly ashes (60-80%) blended with metakaolin (20-40%).

Post-fire vegetation regeneration in Portugal : implications for management

This thesis aims at improving the knowledge on the post-fire vegetation regeneration. For that, forests and shrublands were studied, after forest fires and experimental fires. Maritime Pine (Pinus pinaster) recruitment after fire was studied. Fire severity was evidenced as a major effect on this process. High crown fire severity can combust the pines, destroying the seed bank and impeding post fire pine recruitment. However, crown combustion also influences the post-fire conditions on the soil surface, since high crown combustion (HCC) will decrease the postfire needle cast. After low crown combustion (LCC) (scorched rather than torched crowns), a considerable needle cover was observed, along with a higher density of pine seedlings. The overall trends of post-fire recruitment among LCC and HCC areas could be significantly attributed to cover by needles, as well by the estimation of fire severity using the diameters of the burned twigs (TSI). Fire increased the germination from the soil seed bank of a Pinus pinaster forest, and the effects were also related with fire severity. The densities of seedlings of the dominant taxa (genus Erica and Calluna vulgaris) were contrastingly affected in relation to the unburned situation, depending on fire severity, as estimated from the degree of fire-induced crown damage (LCC/HCC), as well as using a severity index based on the diameters of remaining twigs (TSI). Low severity patches had an increase in germination density relatively to the control, while high severity patches suffered a reduction. After an experimental fire in a heathland dominated by Pterospartum tridentatum, Erica australis and E. umbellata, no net differences in seedling emergence were observed, in relation to the pre-fire situation. However, rather than having no effect, the heterogeneity of temperatures caused by fire promoted caused divergent effects over the burned plot in terms of Erica australis germination – a progressive increased was observed in the plots were maximum temperature recorded ranged from 29 to 42.5ºC and decreased in plots with maximum temperature ranging from 51.5 to 74.5ºC. In this heathland, the seed density of two of the main species (E. australis and E. umbellata) was higher under their canopies, but the same was not true for P. tridentatum. The understory regeneration in pine and eucalypt stands, 5 to 6 years post fire, has been strongly associated with post-fire management practices. The effect of forest type was, comparatively, insignificant. Soil tilling, tree harvesting and shrub clearance, were linked to lower soil cover percentages. However, while all these management operations negatively affected the cover of resprouters, seeders were not affected by soil tilling. A strong influence of biogeographic region was identified, suggesting that more vulnerable regions may suffer higher effects of management, even under comparatively lower management pressure than more productive regions. This emphasizes the need to adequate post-fire management techniques to the target regions.

A desagregação espacial de dados agrícolas: aplicação de uma abordagem baseada na máxima entropia ao concelho de Castelo de Vide

Dissertação mest., Gestão Sustentável de Espaços Rurais, Universidade do Algarve, 2009

Conservation status of the endangered chimpanzee (Pan troglodytes verus) in Lagoas de Cufada Natural Park : (Republic of Guinea-Bissau)

Tese de doutoramento, Biologia (Ecologia), Universidade de Lisboa, Faculdade de Ciências, 2014

Penicillium glabrum cork colonising isolates – preliminary analysis of their genomic similari

Cork stopper manufacturing process includes an operation, known as stabilisation, by which humid cork slabs are extensively colonised by fungi. The effects of fungal growth on cork are yet to be completely understood and are considered to be involved in the so called “cork taint” of bottled wine. It is essential to identify environmental constraints which define the appearance of the colonising fungal species and to trace their origin to the forest and/or as residents in the manufacturing space. The present article correlates two sets of data, from consecutive years and the same season, of systematic biologic sampling of two manufacturing units, located in the North and South of Portugal. Chrysonilia sitophila dominance was identified, followed by a high diversity of Penicillium species. Penicillium glabrum, found in all samples, was the most frequent isolated species. P. glabrum intra-species variability was investigated using DNA fingerprinting techniques revealing highly discriminative polymorphic markers in the genome. Cluster analysis of P. glabrum data was discussed in relation to the geographical location of strains, and results suggest that P. glabrum arise from predominantly the manufacturing space, although cork resident fungi can also contrib

Notes on Niagara /

Exerpts from Houghton's "Niagara and other poems", Hardy's "Through cities and prairie lands", Dickens' "American notes", etc.

REFLECT : logiciel de restitution des réflectances au sol pour l’amélioration de la qualité de l'information extraite des images satellitales à haute résolution spatiale

RÉSUMÉ - Les images satellitales multispectrales, notamment celles à haute résolution spatiale (plus fine que 30 m au sol), représentent une source d’information inestimable pour la prise de décision dans divers domaines liés à la gestion des ressources naturelles, à la préservation de l’environnement ou à l’aménagement et la gestion des centres urbains. Les échelles d’étude peuvent aller du local (résolutions plus fines que 5 m) à des échelles régionales (résolutions plus grossières que 5 m). Ces images caractérisent la variation de la réflectance des objets dans le spectre qui est l’information clé pour un grand nombre d’applications de ces données. Or, les mesures des capteurs satellitaux sont aussi affectées par des facteurs « parasites » liés aux conditions d’éclairement et d’observation, à l’atmosphère, à la topographie et aux propriétés des capteurs. Deux questions nous ont préoccupé dans cette recherche. Quelle est la meilleure approche pour restituer les réflectances au sol à partir des valeurs numériques enregistrées par les capteurs tenant compte des ces facteurs parasites ? Cette restitution est-elle la condition sine qua non pour extraire une information fiable des images en fonction des problématiques propres aux différents domaines d’application des images (cartographie du territoire, monitoring de l’environnement, suivi des changements du paysage, inventaires des ressources, etc.) ? Les recherches effectuées les 30 dernières années ont abouti à une série de techniques de correction des données des effets des facteurs parasites dont certaines permettent de restituer les réflectances au sol. Plusieurs questions sont cependant encore en suspens et d’autres nécessitent des approfondissements afin, d’une part d’améliorer la précision des résultats et d’autre part, de rendre ces techniques plus versatiles en les adaptant à un plus large éventail de conditions d’acquisition des données. Nous pouvons en mentionner quelques unes : - Comment prendre en compte des caractéristiques atmosphériques (notamment des particules d’aérosol) adaptées à des conditions locales et régionales et ne pas se fier à des modèles par défaut qui indiquent des tendances spatiotemporelles à long terme mais s’ajustent mal à des observations instantanées et restreintes spatialement ? - Comment tenir compte des effets de « contamination » du signal provenant de l’objet visé par le capteur par les signaux provenant des objets environnant (effet d’adjacence) ? ce phénomène devient très important pour des images de résolution plus fine que 5 m; - Quels sont les effets des angles de visée des capteurs hors nadir qui sont de plus en plus présents puisqu’ils offrent une meilleure résolution temporelle et la possibilité d’obtenir des couples d’images stéréoscopiques ? - Comment augmenter l’efficacité des techniques de traitement et d’analyse automatique des images multispectrales à des terrains accidentés et montagneux tenant compte des effets multiples du relief topographique sur le signal capté à distance ? D’autre part, malgré les nombreuses démonstrations par des chercheurs que l’information extraite des images satellitales peut être altérée à cause des tous ces facteurs parasites, force est de constater aujourd’hui que les corrections radiométriques demeurent peu utilisées sur une base routinière tel qu’est le cas pour les corrections géométriques. Pour ces dernières, les logiciels commerciaux de télédétection possèdent des algorithmes versatiles, puissants et à la portée des utilisateurs. Les algorithmes des corrections radiométriques, lorsqu’ils sont proposés, demeurent des boîtes noires peu flexibles nécessitant la plupart de temps des utilisateurs experts en la matière. Les objectifs que nous nous sommes fixés dans cette recherche sont les suivants : 1) Développer un logiciel de restitution des réflectances au sol tenant compte des questions posées ci-haut. Ce logiciel devait être suffisamment modulaire pour pouvoir le bonifier, l’améliorer et l’adapter à diverses problématiques d’application d’images satellitales; et 2) Appliquer ce logiciel dans différents contextes (urbain, agricole, forestier) et analyser les résultats obtenus afin d’évaluer le gain en précision de l’information extraite par des images satellitales transformées en images des réflectances au sol et par conséquent la nécessité d’opérer ainsi peu importe la problématique de l’application. Ainsi, à travers cette recherche, nous avons réalisé un outil de restitution de la réflectance au sol (la nouvelle version du logiciel REFLECT). Ce logiciel est basé sur la formulation (et les routines) du code 6S (Seconde Simulation du Signal Satellitaire dans le Spectre Solaire) et sur la méthode des cibles obscures pour l’estimation de l’épaisseur optique des aérosols (aerosol optical depth, AOD), qui est le facteur le plus difficile à corriger. Des améliorations substantielles ont été apportées aux modèles existants. Ces améliorations concernent essentiellement les propriétés des aérosols (intégration d’un modèle plus récent, amélioration de la recherche des cibles obscures pour l’estimation de l’AOD), la prise en compte de l’effet d’adjacence à l’aide d’un modèle de réflexion spéculaire, la prise en compte de la majorité des capteurs multispectraux à haute résolution (Landsat TM et ETM+, tous les HR de SPOT 1 à 5, EO-1 ALI et ASTER) et à très haute résolution (QuickBird et Ikonos) utilisés actuellement et la correction des effets topographiques l’aide d’un modèle qui sépare les composantes directe et diffuse du rayonnement solaire et qui s’adapte également à la canopée forestière. Les travaux de validation ont montré que la restitution de la réflectance au sol par REFLECT se fait avec une précision de l’ordre de ±0.01 unités de réflectance (pour les bandes spectrales du visible, PIR et MIR), même dans le cas d’une surface à topographie variable. Ce logiciel a permis de montrer, à travers des simulations de réflectances apparentes à quel point les facteurs parasites influant les valeurs numériques des images pouvaient modifier le signal utile qui est la réflectance au sol (erreurs de 10 à plus de 50%). REFLECT a également été utilisé pour voir l’importance de l’utilisation des réflectances au sol plutôt que les valeurs numériques brutes pour diverses applications courantes de la télédétection dans les domaines des classifications, du suivi des changements, de l’agriculture et de la foresterie. Dans la majorité des applications (suivi des changements par images multi-dates, utilisation d’indices de végétation, estimation de paramètres biophysiques, …), la correction des images est une opération cruciale pour obtenir des résultats fiables. D’un point de vue informatique, le logiciel REFLECT se présente comme une série de menus simples d’utilisation correspondant aux différentes étapes de saisie des intrants de la scène, calcul des transmittances gazeuses, estimation de l’AOD par la méthode des cibles obscures et enfin, l’application des corrections radiométriques à l’image, notamment par l’option rapide qui permet de traiter une image de 5000 par 5000 pixels en 15 minutes environ. Cette recherche ouvre une série de pistes pour d’autres améliorations des modèles et méthodes liés au domaine des corrections radiométriques, notamment en ce qui concerne l’intégration de la FDRB (fonction de distribution de la réflectance bidirectionnelle) dans la formulation, la prise en compte des nuages translucides à l’aide de la modélisation de la diffusion non sélective et l’automatisation de la méthode des pentes équivalentes proposée pour les corrections topographiques.

The Impact of Recycling on the Long-Run Stock of Trees

Interest in recycling of forest products has grown in recent years, one of the goals being to conserve the stock of trees or possibly increase it to compensate for positive externalities generated by the forest and neglected by the market. This paper explores the issue as to whether recycling is an appropriate measure to attain such a goal. We do this by considering the problem of the private owner of an area of land, who, acting as a price taker, decides how to allocate his land over time between forestry and some other use, and at what age to harvest the forest area chosen. Once the forest is cut, he makes a new land allocation decision and replants. He does so indefinitely, in a Faustmann-like framework. The wood from the harvest is transformed into a final product which is partly recycled into a substitute for the virgin wood, so that past output affects the current price. We show that in such a context, increasing the rate of recycling will result in less area being devoted to forestry. It will also have the effect of increasing the harvest age of the forest, as long as the planting cost is positive. The net effect on the flow of virgin wood being harvested to supply the market will as a result be ambiguous. The main point however is that recycling will result in a smaller, not a larger, stock of trees in the long run. It would therefore be best to resort to other means if the goal is to increase the stock of trees.