The establishment of communication systems depends on the scale of competition

How communication systems emerge and remain stable is an important question in both cognitive science and evolutionary biology. For communication to arise, not only must individuals cooperate by signaling reliable information, but they must also coordinate and perpetuate signals. Most studies on the emergence of communication in humans typically consider scenarios where individuals implicitly share the same interests. Likewise, most studies on human cooperation consider scenarios where shared conventions of signals and meanings cannot be developed de novo. Here, we combined both approaches with an economic experiment where participants could develop a common language, but under different conditions fostering or hindering cooperation. Participants endeavored to acquire a resource through a learning task in a computer-based environment. After this task, participants had the option to transmit a signal (a color) to a fellow group member, who would subsequently play the same learning task. We varied the way participants competed with each other (either global scale or local scale) and the cost of transmitting a signal (either costly or noncostly) and tracked the way in which signals were used as communication among players. Under global competition, players signaled more often and more consistently, scored higher individual payoffs, and established shared associations of signals and meanings. In addition, costly signals were also more likely to be used under global competition; whereas under local competition, fewer signals were sent and no effective communication system was developed. Our results demonstrate that communication involves both a coordination and a cooperative dilemma and show the importance of studying language evolution under different conditions influencing human cooperation.

Attitudes and beliefs of palliative care physicians regarding communication with terminally ill cancer patients.

The subject of communication between palliative care physicians and their patients regarding their diagnosis and prognosis has not been extensively researched. The purpose of this survey was to compare the attitudes and beliefs of palliative care specialists regarding communication with the terminally ill in Europe, South America, and Canada. A sample of palliative care physicians from South America (Argentina and Brazil), French-speaking Europe, and Canada were identified, and posted a questionnaire. Physicians who stated that they practised palliative care at least 30% of their time were considered evaluable as palliative care specialists. Of a total of 272 questionnaires, 228 were returned (84%); and 182/228 (81%) respondents were considered to be palliative care specialists. Palliative care physicians in all three regions believed that cancer patients should be informed of their diagnosis and the terminal nature of their illness. Physicians reported that at least 60% of their patients knew their diagnosis and the terminal stage of their illness in 52% and 24% of cases in South America, and 69% and 38% of cases in Europe, respectively. All physicians agreed that 'do not resuscitate' orders should be present, and should be discussed with the patient in all cases. While 93% of Canadian physicians stated that at least 60% of their patients wanted to know about the terminal stage of their illness, only 18% of South American, and 26% of European physicians said this (P < 0.001). Similar results were found when the physicians were asked the percentage of families who want patients to know the terminal stage of their illness. However, almost all of the physicians agreed that if they had terminal cancer they would like to know. There was a significant association between patient based decision-making and female sex (P = 0.007), older age (P = 0.04), and physicians from Canada and South America (P < 0.001). Finally, in their daily decision making, South American physicians were significantly more likely to support beneficence and justice as compared with autonomy. Canadian physicians were more likely to support autonomy as compared with beneficence. In summary, our findings suggest that there are major regional differences in the attitudes and beliefs of physicians regarding communication at the end of life. More research is badly needed on the attitudes and beliefs of patients, families, and health care professionals in different regions of the world.

Infant's triangular communication in "two for one" versus "two against one" family triangles: Case illustrations

Infants use their social competence very early to communicate not only in dyads but also in triads, in particular in the triangle they form with their mother and father. The development of this triangular communication is largely shaped by the ways the parents support or undermine each other in relation to their child. Whereas triangular communication is facilitated in "two for one" alliances, it is recruited in the service of regulating the parents' conflicts in "two against one" coalitions. These processes are manifest in toddlerhood and may be traced back to the coparenting alliance in formation during pregnancy.

Protéger la main au travail : une exposition itinérante ou l'utilisation d'un moyen de communication dans les actions de prévention

Après une revue de la littérature concernant les médias utilisés dans le cadre de campagne de prévention, le matériel d'exposition est présenté. Le contenu et les moyens mis en oeuvre ne sont traités que dans la mesure où ils influencent directement la présentation du matériel. Enfin pour clore ce travail, une discussion concernant les possibilités et difficultés d'évaluation de ces actions de diffusion de l'information. [Auteur, p. 2]

Identification of Research Portfolio for the Development of Filtration Equipment

This piece of work which is Identification of Research Portfolio for Development of Filtration Equipment aims at presenting a novel approach to identify promising research topics in the field of design and development of filtration equipment and processes. The projected approach consists of identifying technological problems often encountered in filtration processes. The sources of information for the problem retrieval were patent documents and scientific papers that discussed filtration equipments and processes. The problem identification method adopted in this work focussed on the semantic nature of a sentence in order to generate series of subject-action-object structures. This was achieved with software called Knowledgist. List of problems often encountered in filtration processes that have been mentioned in patent documents and scientific papers were generated. These problems were carefully studied and categorized. Suggestions were made on the various classes of these problems that need further investigation in order to propose a research portfolio. The uses and importance of other methods of information retrieval were also highlighted in this work.

Enhanced MDIR receiver for space-time dispersive channels

A particular property of the matched desiredimpulse response receiver is introduced in this paper, namely,the fact that full exploitation of the diversity is obtained withmultiple beamformers when the channel is spatially and timelydispersive. This particularity makes the receiver specially suitablefor mobile and underwater communications. The new structureprovides better performance than conventional and weightedVRAKE receivers, and a diversity gain with no needs of additionalradio frequency equipment. The baseband hardware neededfor this new receiver may be obtained through reconfigurabilityof the RAKE architectures available at the base station. Theproposed receiver is tested through simulations assuming UTRAfrequency-division-duplexing mode.

Intrinsic subspace convergence in TDD MIMO communication

In numerical linear algebra, students encounter earlythe iterative power method, which finds eigenvectors of a matrixfrom an arbitrary starting point through repeated normalizationand multiplications by the matrix itself. In practice, more sophisticatedmethods are used nowadays, threatening to make the powermethod a historical and pedagogic footnote. However, in the contextof communication over a time-division duplex (TDD) multipleinputmultiple-output (MIMO) channel, the power method takes aspecial position. It can be viewed as an intrinsic part of the uplinkand downlink communication switching, enabling estimationof the eigenmodes of the channel without extra overhead. Generalizingthe method to vector subspaces, communication in thesubspaces with the best receive and transmit signal-to-noise ratio(SNR) is made possible. In exploring this intrinsic subspace convergence(ISC), we show that several published and new schemes canbe cast into a common framework where all members benefit fromthe ISC.

Information and Communication Society's Impact on Global Paper Consumption

Tämän tutkielman tavoitteena on selvittää informaatio- ja kommunikaatioyhteiskunnan vaikutusta paperin kulutukseen maailmanlaajuisesti. Tarkoituksena on löytää informaatio- ja kommunikaatioyhteiskuntaa kuvaavia mittareita, joiden avulla voidaan vertailla kehittyneitä ja kehittyviä markkina-alueita keskenään. Tutkimusongelmaan haetaan ratkaisua tutkimalla sekä kirjallisuutta että tilastoja, ja vertaamalla niitä esitettyihin teorioihin informaatio- ja kommunikaatioyhteiskunnan kehityksestä. Tutkielman avulla pyritään arvioimaan ja kuvaamaantoimintaympäristön muutoksia paperin kulutuksen suhteen pitkällä aikavälillä informaatio- ja kommunikaatioyhteiskunnan näkökulmasta.

Sähköverkkotiedonsiirtomenetelmän kehittäminen taajuusmuuttajaohjattuihin sähkökäyttöihin

Sähkömoottorin jatkuva-aikainen kunnonvalvonta vaatii tiedonsiirtoa moottorilta ylemmälle tietojärjestelmätasolle, kuten taajuusmuuttajalle. Uusien kaapeleiden asennus on työlästä ja kallista. Moottorin ja taajuusmuuttajan välillä on kuitenkin aina kaapeli, jota käytetään moottorin tehonsyöttöön. Tätä kaapelia on mahdollista käyttää myös tiedonsiirtokanavana. Tässä diplomityössä käsitellään ja tutkitaan sähköverkkotiedonsiirtomenetelmää, jonka avulla voidaan muodostaa Ethernet-yhteys moottorilta taajuusmuuttajalle tai toisinpäin. Työssä kehitetään simulointimalli tiedonsiirtokanavan taajuusriippuvan vaimennuksen simuloimiseen. Lisäksi kehitetään kytkentärajapinta, joka mahdollistaa tiedonsiirron kolmivaiheisessa taajuusmuuttajan syöttämässä moottorikaapelissa. Työssä suunnitellaan ja toteutetaan tiedonsiirtoa varten pilot-laitteisto, jolla tehdään laboratoriotestit. Laboratoriotesteillä varmistetaan menetelmän soveltuvuus. Laboratoriotestien avulla etsitään myös reunaehdot tiedonsiirron toiminnalle ja tiedonsiirtonopeuteen vaikuttavia tekijöitä taajuusmuuttajakäytössä. Lisäksi tarkastellaan menetelmän aiheuttamaa viivettä, joka on tärkeäsäätösovellusten kannalta. Lopuksi arvioidaan menetelmän soveltuvuus käytännön sovelluksiin.

Laiteohjauksessamuodostuvan informaation jalostamisen mahdollisuudet

Teollisuuden automaatiojärjestelmät digitalisoituvat, samalla niiden tuottaman reaaliaikaisen datan määrä kasvaa ja etenkin sen saatavuus helpottuu. Samanaikaisesti laitevalmistajan liiketoimintamallit ovat muuttumassa perinteisestä konevalmistuksesta kohti palveluntarjontaa. Muuttuneessa tilanteessa laitteiden ohjauksessa käytettäviltä järjestelmiltä vaaditaan uusia ominaisuuksia. Informaation käsittely ja jalostaminen muodostuvat tärkeiksi kilpailu-tekijöiksi. Kirjallisuusosassa on tarkasteltu, miten data jalostuu informaatioksi ja siitä edelleen tietämykseksi. Työssä myös selvitetään, miten niitä voidaan hyödyntää liiketoiminnassa. Samalla perehdytään teollisuudesta löytyviin informaatio- ja tietämysjärjestelmiin. Kokeellisessa osassa esitellään toimiva tiedonkeruu- ja raportointijärjestelmä ja tutkitaan, miten sitä tulisi kehittää, jotta se sopisi paremmin muuttuviin liiketoimintamalleihin. Lopputuloksena kehitettiin mallijärjestelmä, jolla pystytään täyttämään laitevalmistajan ja loppukäyttäjän muuttuneet informaatiotarpeet osana laiteohjausta.

Characteristics of a good customer reference for a process equipment supplier

Työn tavoitteena oli tutkia hyvän asiakasreferenssin ominaisuuksia suodatinvalmistaja Laroxin myynnin ja huollon sekä yrityksen asiakkaiden näkökulmasta. Larox voi käyttää saatua tietoa referenssien tehokkaampaan valintaan ja hyödyntämiseen. Kaksi internet-kyselyä toteutettiin, välineenä Webropol. Alustava kysely sunnattiin Laroxin myynnille ja huollolle. Kysely koostui viidestä kategoriasta asiakasreferenssejä, joiden tärkeyttä arvioitiin, sekä vapaista vastauksista. Tunnistettuja hyvän asiakasreferenssin ominaisuuksia ovat hyvä suhde referenssiasiakkaaseen, positiiviset jarehelliset suosittelut asiakkaalta, referenssilaitteen hyvä toimintakyky ja asiakas joka ymmärtää huollon tärkeyden. Pääkysely suunnattiin Laroxin asiakkaille. Tilastollisilla analyyseilla tutkittiin koetun riskin mallinmuuttujien välisiä yhteyksiä. Analyysit eivät paljastaneet merkittäviä riippuvuuksia asiakasreferenssin ominaisuuksien tärkeydessä eritaustaisten vastaajien tai tilannetekijöiden välillä, mutta asiakasreferenssin ominaisuuksien faktorit tukevat mallia. Referenssilaitteiden toimintakyky vaikuttaa tärkeimmältä ja huollon tärkeys on myös merkittävä.

Container Handling Equipment Monitoring System, case: Steveco Oy

Container Handling Equipment Monitoring System (CHEMS) is a system developed by Savcor One Oy. CHEMS measures important information for container ports performance and produces performance indicators. The aim of this thesis was to clarify performance measurement contents to Savcor and to develop, as an example, performance measures to Steveco Oy's container operations. The theoretical part of the thesis clarifies performance measurement and which of its components are important to container port. Performance measurement and measures are presented from the operational level's point of view, in which CHEMS is planned to aim. The theory of development process of performance measures is introduced at the end of the theoretical part. To make sure that performance measures are efficiently used, Steveco Oy's performance measures are developed in cooperation with the users. The measurement in operational level is continuous and the results must be reacted asquickly as possible. CHEMS is very suitable to continuous measurement and to produce real time-measures of container operations which are hard to get any otherway.