Chemical equilibrium analysis and CFD simulation of coal combustion and NOx formation

A full two-fluid model of reacting gas-particle flows with an algebraic unified second-order moment (AUSM) turbulence-chemistry model is used to simulate Beijing coal combustion and NOx formation. The sub-models are the k-epsilon-kp two-phase turbulence model, the EBU-Arrhenius volatile and CO combustion model, the six-flux radiation model, coal devolatilization model and char combustion model. The blocking effect on NOx formation is discussed. In addition, the chemical equilibrium analysis is used to predict NOx concentration at different temperature. Results of CID simulation and chemical equilibrium analysis show that, optimizing air dynamic parameters can delay the NOx formation and decrease NOx emission, but it is effective only in a restricted range. In order to decrease NOx emission near to zero, the re-burning or other chemical methods must be used.

Numerical Sensitivity Analysis and Partial Similarity of Porous Media Flows

A numerical optimisation approach to identify dominant dimensionless variables in porous media flows by sensitivity analysis is proposed. We have validated the approach at first by examining a simple oil reservoir theoretically and numerically as well. A more complex water-flooding reservoir is examined based on sensitivity analysis of oil recovery to the similarity parameters, thus demonstrating the feasibility of the proposed approach to identify dominant similarity parameters for water-oil two-phase flows.

A schematic analysis and discussion of species taken by otter trawl net by the research vessel Orion from July, 1965 to June 1966 in the Chesapeake Bay and major tributaries

From July 1965 to June 1964 the Natural Resources Institute's Research Vessel ORION took 16 minute tows with a forty (40) foot otter trawl net at 38 selected locations in Chesapeake Bay from the south of the Potomac River to Turkey Point at the head of the Bay and including some tributaries. Shallow and deep hauls were taken at most stations with depths ranging from 5 to 140 feet. A schematic summary of the 54 different species caught was compared with "Fishes of the Chesapeake Bay" by S. F. Hildebrand and W. C. Schroeder. Sixteen species including five not contained in the above references were selected for discussion. (PDF contains 21 pages)

Techniques for spatial analysis and visualization of benthic mapping data: final report

The mapping and geospatial analysis of benthic environments are multidisciplinary tasks that have become more accessible in recent years because of advances in technology and cost reductions in survey systems. The complex relationships that exist among physical, biological, and chemical seafloor components require advanced, integrated analysis techniques to enable scientists and others to visualize patterns and, in so doing, allow inferences to be made about benthic processes. Effective mapping, analysis, and visualization of marine habitats are particularly important because the subtidal seafloor environment is not readily viewed directly by eye. Research in benthic environments relies heavily, therefore, on remote sensing techniques to collect effective data. Because many benthic scientists are not mapping professionals, they may not adequately consider the links between data collection, data analysis, and data visualization. Projects often start with clear goals, but may be hampered by the technical details and skills required for maintaining data quality through the entire process from collection through analysis and presentation. The lack of technical understanding of the entire data handling process can represent a significant impediment to success. While many benthic mapping efforts have detailed their methodology as it relates to the overall scientific goals of a project, only a few published papers and reports focus on the analysis and visualization components (Paton et al. 1997, Weihe et al. 1999, Basu and Saxena 1999, Bruce et al. 1997). In particular, the benthic mapping literature often briefly describes data collection and analysis methods, but fails to provide sufficiently detailed explanation of particular analysis techniques or display methodologies so that others can employ them. In general, such techniques are in large part guided by the data acquisition methods, which can include both aerial and water-based remote sensing methods to map the seafloor without physical disturbance, as well as physical sampling methodologies (e.g., grab or core sampling). The terms benthic mapping and benthic habitat mapping are often used synonymously to describe seafloor mapping conducted for the purpose of benthic habitat identification. There is a subtle yet important difference, however, between general benthic mapping and benthic habitat mapping. The distinction is important because it dictates the sequential analysis and visualization techniques that are employed following data collection. In this paper general seafloor mapping for identification of regional geologic features and morphology is defined as benthic mapping. Benthic habitat mapping incorporates the regional scale geologic information but also includes higher resolution surveys and analysis of biological communities to identify the biological habitats. In addition, this paper adopts the definition of habitats established by Kostylev et al. (2001) as a “spatially defined area where the physical, chemical, and biological environment is distinctly different from the surrounding environment.” (PDF contains 31 pages)

A bioregional classification of the continental shelf of northeastern North America for conservation analysis and planning based on representation

Understanding how well National Marine Sanctuaries and other marine protected areas represent the diversity of species present within and among the biogeographic regions where they occur is essential for assessing their conservation value and identifying gaps in the protection of biological diversity. One of the first steps in any such assessment should be the development of clearly defined and scientifically justified planning boundaries representing distinct oceanographic conditions and faunal assemblages. Here, we propose a set of boundaries for the continental shelf of northeastern North America defined by subdivisions of the Eastern Temperate Province, based on a review and synthesis (i.e. meta-analysis) of the scientific literature. According to this review, the Eastern Temperate Province is generally divided into the Acadian and Virginian Subprovinces. Broad agreement places the Scotian Shelf, Gulf of Maine, and Bay of Fundy within the Acadian Subprovince. The proper association of Georges Bank is less clear; some investigators consider it part of the Acadian and others part of the Virginian. Disparate perspectives emerge from the analysis of different groups of organisms. Further, while some studies suggest a distinction between the Southern New England shelf and the rest of the Mid-Atlantic Bight, others describe the region as a broad transition zone with no unique characteristics of its own. We suggest there exists sufficient evidence to consider the Scotian Shelf, Gulf of Maine, Georges Bank, Southern New England, and Southern Mid-Atlantic Bight as distinct biogeographic regions from a conservation planning perspective, and present a set of proposed mapped boundaries. (PDF contains 23 pages.)

Livelihood analysis and development of a planning support for the poor in aquaculture and aquatic resource management. Workshop proceedings. 13-15 February 2001, Thai Nguyen, Vietnam

The workshop was organized to understand and describe the livelihoods of poor people who manage aquatic resources for planning support. The purpose was to support field workers to carry out livelihood analysis and how to use this information. (PDF contains 13 pages)

Seafood safety: economics of Hazard Analysis and Critical Control Point (HACCP) programmes

Seventy percent of the world's catch of fish and fishery products is consumed as food. Fish and shellfish products represent 15.6 percent of animal protein supply and 5.6 percent of total protein supply on a worldwide basis. Developing countries account for almost 50 percent of global fish exports. Seafood-borne disease or illness outbreaks affect consumers both physically and financially, and create regulatory problems for both importing and exporting countries. Seafood safety as a commodity cannot be purchased in the marketplace and government intervenes to regulate the safety and quality of seafood. Theoretical issues and data limitations create problems in estimating what consumers will pay for seafood safety and quality. The costs and benefits of seafood safety must be considered at all levels, including the fishers, fish farmers, input suppliers to fishing, processing and trade, seafood processors, seafood distributors, consumers and government. Hazard Analysis Critical Control Point (HACCP) programmes are being implemented on a worldwide basis for seafood. Studies have been completed to estimate the cost of HACCP in various shrimp, fish and shellfish plants in the United States, and are underway for some seafood plants in the United Kingdom, Canada and Africa. Major developments within the last two decades have created a set of complex trading situations for seafood. Current events indicate that seafood safety and quality can be used as non-tariff barriers to free trade. Research priorities necessary to estimate the economic value and impacts of achieving safer seafood are outlined at the consumer, seafood production and processing, trade and government levels. An extensive list of references on the economics of seafood safety and quality is presented. (PDF contains 56 pages; captured from html.)

Gillraker analysis and speciation in the thread herring genus Opisthonema

ENGLISH: The thread herrings, genus Opisthonema, family Clupeidae, are marine fishes that occur only in tropical and subtropical waters off both coasts of the American continent. The genus is composed of one Atlantic species and four Pacific species. Opisthonema oglinum (LeSueur), the single species in the western Atlantic Ocean, occurs from Brazil to Massachusetts, at Bermuda, and throughout the West Indies. Opisthonema libertate (Günther), Opisthonema bulleri (Regan), and Opisthonema medirastre, new species, are Pacific coastal species which occur together from Peru to Mexico (with at least one occasionally in California). Opisthonema berlangai, new species, is confined to the vicinity of the Galapagos Islands. SPANISH: Los arenques de hebra, género Opisthonema, familia Clupeidae, son peces marinos que se encuentran sólo en aguas tropicales y subtropicales cerca a ambas costas del continente americano. El género está compuesto de una especie en el Atlántico y de cuatro en el Pacifico. Opisthonema oglinum (LeSueur), única especie que medra el Océano Atlántico occidental, se encuentra del Brasil a Massachusetts, en Bermuda, y las Indias Occidentales. Opisthonema libertate (Günther), Opisthonema bulleri (Regan), y Opisthonema medirastre, especie nueva, son especies costaneras del Pacífico que aparecen entremezcladas del Perú a México (ocasionalmente por lo menos una de ellas en California). Opisthonema berlangai, especie nueva, está confinada a la vecindad de las Islas Galápagos.

Enhanced Operation of Electricity Distribution Grids Through Smart Metering PLC Network Monitoring, Analysis and Grid Conditioning

Low Voltage (LV) electricity distribution grid operations can be improved through a combination of new smart metering systems' capabilities based on real time Power Line Communications (PLC) and LV grid topology mapping. This paper presents two novel contributions. The first one is a new methodology developed for smart metering PLC network monitoring and analysis. It can be used to obtain relevant information from the grid, thus adding value to existing smart metering deployments and facilitating utility operational activities. A second contribution describes grid conditioning used to obtain LV feeder and phase identification of all connected smart electric meters. Real time availability of such information may help utilities with grid planning, fault location and a more accurate point of supply management.