Fluxo de gases de efeito estufa na implantação de sistema silvipastoril em pastejo com ovinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ensaios não-destrutivos de propagação de ondas em toras e madeira serrada de Pinus. taeda L.

In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on condition. P. taeda L wood (43 years old trees) from Horto Florestal of Manduri (latitude 230 00’ south, longitude 400 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better ju regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, cons right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences between the velocity of stress waves at juvenile wood, mature wood and pith regions. Keywords: stress wave method, velocity 17 destrutivos de propagação da propagação de ondas de tensão em toras e madeira serrada de taeda L. Hernando Alfonso Lara Palma - Universidade Estadual Paulista Faculdade de Ciências Agronômicas – FCA/UNESP – Botucatu - SP, e-mail: awballarin@fca.unesp.br Luiz Antonio Vasques Hellmeister - Universidade Estadual Paulista - Faculdade de Arquitetura, FAAC/UNESP – Bauru - SP, e-mail: hellmeister@faac.unesp.br Este trabalho teve como objetivo analisar a influência do tipo de lenho, da posição da tora ao longo do fuste e das dimensões das peças desdobradas, na velocidade de as de tensão (Stress wave method), na condição de madeira verde. P. taeda L., originária de árvores de plantio do Horto Florestal de SP., com idade aproximada de 43 anos, pela facilidade de identificação dos anéis imento e demarcação das regiões de madeira adulta e madeira juvenil. Foram amostradas 6 árvores distintas, escolhidas ao acaso do talhão selecionado. De cada árvore foram retiradas 4 toras com comprimento de 2,5 m cada. Foram demarcadas nas toras a ha central (8 cm de espessura) e 4 tábuas laterais (espessura comercial de 2,5 cm), sendo duas à esquerda e duas à direita da prancha central. Foram avaliadas as relações existentes entre as velocidades de propagação das ondas de tensão na madeira íntegra (toras) e desdobrada (pranchas e tábuas), na condição de madeira verde, nas três regiões distintas do lenho: medula, madeira adulta e madeira juvenil. A análise comparativa dos resultados revelou a concordância entre as velocidades antes e após o desdobr madeira. Houve diferenciação estatisticamente significativa entre as velocidades de propagação das ondas de tensão nos lenhos adulto, juvenil e na medula. -destrutivos, método das ondas de tensão, Pinus taeda stress wave tests on green logs and lumber of Pinus taeda In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on L wood (43 years old trees) from Horto Florestal of Manduri (latitude 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better juvenile and mature wood regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, considering 2 boards on the left and 2 at the right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood, juvenile wood and pith). Comparative analyses of results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences ty of stress waves at juvenile wood, mature wood and pith regions

Plantas e formigas em diferentes usos da terra e técnicas de restauração no Cerrado

Pós-graduação em Ciência Florestal - FCA

Diagnóstico de situação epidemiológica da Leishmaniose visceral canina em Rio Verde-GO

Pós-graduação em Medicina Veterinária - FCAV

Avaliação da qualidade da madeira de cinco espécies de Pinus destinadas à produção de celulose

Pós-graduação em Ciência Florestal - FCA

Associações entre borboletas frugívoras em áreas de floresta com diferentes históricos de perturbação antrópica

Pós-graduação em Ecologia e Biodiversidade - IBRC

Mapeamento de ocorrências de eventos perigosos no município de Santos SP: integração com dados de vulnerabilidade socioambiental

This study is based on the mapping of occurrences associated with social vulnerability and natural risks, which refer to the resilience of populations and territories, regarding natural hazards associated with the functioning of natural systems (eg, earthquakes, flood, mass movements). According to UNISDR (2014), the state of São Paulo is a reference in working with Urban Resilience and Disaster in the Resilient Cities Campaign (2014), considering the high investment in Risk Areas Mapping and Public Education Campaigns implemented by the Civil Defense. Thus, this study aims to mapping the occurrence of events related to Tree Falls, Erosion, Landslides, Irregular Housing, Rocky Blocks Falls, Wall Falls, Unroofing and Irregular Construction, attended by the Civil Defense in the city of Santos, São Paulo State, from 2011 to 2014. Thereafter, correlated analyzes to the Environmental Vulnerabilities were generated. The Environmental Vulnerability databases used in this dissertation compose the results of the CNPQ Project - Environmental Vulnerability Mapping of the State of Sao Paulo - Brazil: a methodological contribution of Freitas (2013) and Bortolettoet al (2014), with information collected from the 2010 Census (IBGE, 2010), on a census sectors scale. The adopted methodological procedure involves document analysis followed by data integration in Geographic Information System, through algorithms analysis and mapscrossing.The results obtained in Maps of Social and Environmental Vulnerability Occurrences presented areas of High or Very High Vulnerability. The main variables obtained with such characteristics are Irregular Housing, Landslides and Rocky Blocks Falls, which was associated with hilly terrain formations, with slopes above 30%. To the areas of Medium, Low and Very Low Vulnerability were associated the variables Tree Falls, Wall Falls, Erosion, Unroofing and Irregular Construction, which are spatially distributed without an...

Ecologia de peixes de riachos da bacia do rio Machado, RO: padrões, processos e conservação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

DNA Barcoding em Utricularia (Lentibulariaceae)

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Modelo matemático aplicado na vaporização de toras de Eucalyptus grandis

O objetivo deste estudo é obter um modelo matemático logístico que representa a vaporização de toras de Eucalyptus grandis, em função do diâmetro e do tempo de permanência das toras no tratamento térmico a vapor. Para tanto, foram coletadas toras nas classes diamétricas de 25 a 40 cm de três árvores de E. grandis provenientes do Horto Florestal de Mandurí, SP. Em cada uma das toras foram inseridos três termopares, com profundidades distintas, 1/3 do raio; 2/3 do raio e o terceiro, próximo ao seu centro. Posteriormente, as toras foram vaporizadas a 85ºC e 100% de umidade relativa, até que o último termopar atingisse uma temperatura de 80ºC. Um Datalogger CR10 registrou as temperaturas, no interior do material, durante o tratamento térmico. Conclui-se que o modelo matemático logístico foi bem ajustado, obtido no tratamento térmico com vapor, levando em consideração as três classes de diâmetro e a profundidade máxima de 50 mm de raio, o modelo gerado, apresenta-se uma viabilidade técnica na aplicação do processo de aquecimento de toras com vapor, promovendo um consumo ideal de energia.

Avaliação técnica e econômica da colheita de florestas de eucalipto com harvester

The acquisition of machinery used in timber harvesting depends on high financial investment, which implies the need for assessments that allow defining more precisely, what is the machine or the whole more recommended for streamlining the operation. This study aimed to technically and economically evaluating the performance of a harvester in Eucalyptus forest harvest first cut. The technique analysis included a time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. The results obtained from the technological-economic parameters evidenced that of Diameter at Breast Height directly influenced the productivity of harvester. Consequently the lower costs of forest harvest were obtained for the compartments with wider diameter trees.

Demarcação da madeira juvenil e adulta de Corymbia citriodora

This paper had the objective of determining the transition regions between the juvenile and mature wood of Corymbia citriodora (Eucalyptus citriodora) of 29 years of age from the Experimental Station of Forest Science (EECFA-LCF/ESALQ-USP), located in Anhembi, in the State of São Paulo. The regions of juvenile and mature wood were characterized through anatomical studies - axial fiber length - following the recommendations of the International Association of Wood Anatomists (1989) using disks at the DBH of the trees. The measurements of fiber length were made in equipment for acquisition, diagnosis and image analysis. Five slices were made for every centimeter, in the radial direction and six fiber lengths per slice were measured, producing 30 measurements per sample region. In the total, 1740 lengths of fiber were measured in three disks that were studied. Results indicate a trend of accentuated and linear increase for the length of fibers, from the pith to 11 cm of radial of about 79%. Between 12 cm and 19 cm of the radius, fibers length remained almost constant, and from that point on, the fiber length tended to slightly increase to the bark. It can be concluded that for these trees, at this height of sampling, when the tree has 29 years of age, the extension of the juvenile wood goes up to 52% of its radius.

Análise do índice de cobertura vegetal da área urbana de Piratininga (SP)

The urban area is now home to 50% of world population and the activities related to their disorganized growth, promote the formation of an unhealthy environment. The urban vegetation is necessary and beneficial, because in addition to bringing the man of nature, mitigates climate change and improve the urban microclimate. This study aimed at surveying and analyzing the rate of existing vegetation in urban Piratininga - SP, and from the data obtained, provide allowance for management and planning of green areas and urban areas. Data came from sample survey conducted in 2007 and computerized survey conducted in 2010 indicated that many new neighborhoods have low opt for planting trees of small to medium which does not enhance the urban environment requiring an environmental planning.

O componente arbóreo na Estação Ecológica de Assis, Estado de São Paulo: florística e dinâmica da comunidade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Metano entérico e consumo de ovinos em sistema silvipastoril com diferentes espaçamentos arbóreos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)