Stabilization of standing waves through time-delay feedback

Standing waves are studied as solutions of a complex Ginzburg-Landau equation subjected to local and global time-delay feedback terms. The onset is described as an instability of the uniform oscillations with respect to spatially periodic perturbations. The solution of the standing wave pattern is given analytically and studied through simulations. © 2013 American Physical Society.

Hydrothermally stable, conformal, sulfated zirconia monolayer catalysts for glucose conversion to 5-HMF

The grafting and sulfation of zirconia conformal monolayers on SBA-15 to create mesoporous catalysts of tunable solid acid/base character is reported. Conformal zirconia and sulfated zirconia (SZ) materials exhibit both Brönsted and Lewis acidity, with the Brönsted/Lewis acid ratio increasing with film thickness and sulfate content. Grafted zirconia films also exhibit amphoteric character, whose Brönsted/Lewis acid site ratio increases with sulfate loading at the expense of base sites. Bilayer ZrO2/SBA-15 affords an ordered mesoporous material with a high acid site loading upon sulfation and excellent hydrothermal stability. Catalytic performance of SZ/SBA-15 was explored in the aqueous phase conversion of glucose to 5-HMF, delivering a 3-fold enhancement in 5-HMF productivity over nonporous SZ counterparts. The coexistence of accessible solid basic/Lewis acid and Brönsted acid sites in grafted SZ/SBA-15 promotes the respective isomerization of glucose to fructose and dehydration of reactively formed fructose to the desired 5-HMF platform chemical.

Pore confinement effects and stabilization of carbon nitride oligomers in macroporous silica for photocatalytic hydrogen production

An ordered macroporous host (mac-SiO2) has been used to prevent aggregation of layered photocatalysts based on carbon nitride. Using typical carbon nitride synthesis conditions, cyanamide was condensed at 550 °C in the presence and absence of mac-SiO2. Condensation in the absence of mac-SiO2 results in materials with structural characteristics consistent with the carbon nitride, melon, accompanied by ca. 2 wt% carbonization. For mac-SiO2 supported materials, condensation occurs with greater carbonization (ca. 6 wt%). On addition of 3 wt% Pt cocatalyst photocatalytic hydrogen production under visible light is found to be up to 10 times greater for the supported composites. Time-resolved photoluminescence spectroscopy shows that excited state relaxation is more rapid for the mac-SiO2 supported materials suggesting faster electron-hole recombination and that supported carbon nitride does not exhibit improved charge separation. CO2 temperature programmed desorption indicates that enhanced photoactivity of supported carbon nitride is attributable to an increased surface area compared to bulk carbon nitride and an increase in the concentration of weakly basic catalytic sites, consistent with carbon nitride oligomers.

Stabilization of self-assembled alumina mesophases

An efficient route to stabilize alumina mesophases derived from evaporation-induced self-assembly is reported after investigating various aspects in-depth: influence of the solvent (EtOH, s-BuOH, and t-BuOH) on the textural and structural properties of the mesophases based on aluminum tri-sec-butoxide (ATSB), synthesis reproducibility, role of nonvolatile acids, and the crystallization and thermal stability of the crystalline counterparts. Mesophase specific surface area and pore uniformity depend notably on the solvent; s-BuOH yields the highest surface area and pore uniformity. The optimal mesophase synthesis is reproducible with standard deviations in the textural parameters below 5%. The most pore-uniform mesophases from the three solvents were thermally activated at 1023 K to crystallize them into γ-alumina. The s-BuOH mesophase is remarkably thermally stable, retaining the mesoscopic wormhole order with 300 m2/g (0.45 cm3/g) and an increased acidic site density. These features are not obtained with EtOH or t-BuOH, where agglomerated γ-Al2O3 crystallites are formed with lower surface areas and broader pore size distributions. This was rationalized by the increase of the hydrolysis rate using EtOH and t-BuOH. t-BuOH dehydrates under the synthesis conditions or reacts with HCl, situations that increase the water concentration and rate of hydrolysis. It was found that EtOH exchanges rapidly, producing a highly reactive Al-ethoxide, thus enhancing the hydrolysis rate as well. Particle heterogeneity with random packing of fibrous and wormhole morphologies, attributed to the high hydrolysis rate, was observed for mesophases derived from both solvents. Such a low particle coordination favors coarsening with enlargement of the pore size distribution upon thermal treatment, explaining the lower thermal stability. Controlled hydrolysis and formation of low-polymerized Al species in s-BuOH are possibly responsible for the adequate assembly onto the surfactant. This was verified by the formation of a regular distribution of relatively size-uniform nanoparticles in the mesophase; high particle coordination prevents coarsening, favors densification, and maintains a relatively uniform pore size distribution upon thermal treatment. The acid removal in the evaporation is another key factor to promote network condensation in this route. © 2013 American Chemical Society.

Thermo-oxidative stabilization of poly(lactic acid) with antioxidant intercalated layered double hydroxides

Two antioxidant modified layered double hydroxides (AO-LDHs) were successfully prepared by theintercalation of 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionic acid (IrganoxCOOH) and 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (Trolox) in the layered structure of LDH. It was foundthat by anchoring the phenolic moieties to the LDH layers the antioxidant power is retained in the caseof Trolox, and even amplified in the case of IrganoxCOOH. A small amount of the two AO-LDHs wasincorporated into poly(lactic acid), PLA, by solution mixing and melt extrusion. The thermo-oxidativestability of the composites was compared with that of the neat PLA and PLA containing free AOs. SECanalysis indicates that, after a controlled period of ageing, both the AO-LDHs protect the PLA fromchain scission. The oxidation induction time (OIT, DSC) at 230 °C shows also the beneficial effects ofthe presence of the functional filler in the polymer matrix. Further, results from a preliminary migrationtest suggest that the AO species have a low tendency to migrate away from the AO-LDHs embedded inthe polymer matrix thus keeping the AO protected inside the nanofiller layers thereby remaining activefor a longer time.

Kiigazítás recesszió nélkül. Esettanulmány a magyar stabilizációról = Adjustment without recession: A Case Study of Hungarian Stabilization

1995. március 12-én a magyar kormány és a központi bank szigorú kiigazítási és stabilizációs programot hirdetett meg. A cikk az első eredmények számbavételére tesz kísérletet. A program meghirdetése előtt Magyarország két egymást követő év- ben hatalmas fizetésimérleg-hiányt mutatott fel, és nemzetközi megítélése romlani kezdett. A program radikális intézkedései nyomán elkerülhetővé vált a mexikói vál- sághoz hasonló pénzügyi katasztrófa. Sok makrogazdasági mutató jól érzékelhető javulást jelez: lényegesen csökkent a kereskedelmi mérleg és a folyó fizetési mérleg hiánya, a költségvetés elsődleges egyenlege pozitív lett. Az ilyesféle stabilizációs programokat rendszerint súlyos visszaesés és a munkanélküliség nagy növekedése kíséri. Magyarország elkerülte ezeket a mellékhatásokat: a GDP drasztikus vissza- esés helyett valamelyest tovább növekedett, és a munkanélküliség változatlan ma- radt. A javulásnak nagy ára volt: az életszínvonal erőteljes csökkenése, az infláció felgyorsulása, bár a magyarországi infláció még mindig a kézben tartott, mérsékelt infláció sávjában maradt. A cikk ismerteti a program heterodox módszereit: 1. nagy leértékelés, az előre meghirdetett csúszó árfolyam rezsimjének bevezetése, valamint ideiglenes import- vámpótlék kivetése; 2. határozott jövedelempolitika, amely 12 százalékos reálbércsök- kenést kényszerített ki; 3. fiskális intézkedések, köztük jóléti jogosultságok csök- kentése (a program meghirdetése előtt ezek a jogosultságok tabuk voltak); 4. a hitel- kínálat átcsoportosítása a vállalati szektor javára, a jövedelmezőség növekedése; 5. feszített (bár nem mértéktelenül feszített) monetáris politika, amely lehetővé tette a sikeres vállalatok expanzióját; 6. a privatizáció felgyorsítása, nagy és sikeres lépé- sek egyes kulcsszektorok (energia, telekommunikáció) privatizációjában. Végezetül a tanulmány óva int a túlzott magabiztosságtól és felhívja a figyelmet a potenciális veszélyekre. A makrogazdasági javulás még törékeny. A magyar fejlődés legbiztatóbb sajátossága a termelékenység erőteljes és folyamatos növekedése. / === / On March 12, 1995 Hungary s government and central bank announced a tough program of adjustment and stabilization. This study is an attempt to asses the first results. Before the announcement of the program Hungary had a huge current account deficit for two consecutive years, and her international reputation started to decline. The program s radical measures made it possible to avoid a Mexico-style financial catastrophe. Many macroeconomic indicators show tangible improvement: the trade deficit and the deficit on the current account have been reduced significantly, the primary budget shifted to surplus. These kinds of adjustment programs are usually associated with deep recession and a large increase of unemployment. Hungary avoided these adverse side-effects: GDP instead of a drastic decline, continued to grow somewhat, and unemployment remained unchanged. There was a high price for the improvement: a sharp decline in the standard of living, and an acceleration of inflation, although Hungary is still in the range of controlled, moderate inflation. The paper describes the heterodox instruments of the program: (1) large devaluation, followed by a new exchange rate regime of pre-announced crawling peg, and a temporary import surcharge, (2) energetic income policy, enforcing a 12% cut in real wages; (3) fiscal measures, including cuts in welfare entitlements. That happened for the first time: before the program entitlements had been regarded as taboo ; (4) reallocation of credit supply in favor of the enterprise sector; increase of profitability; (5) tight (but not excessively tight) monetary policy, allowing the expansion of successful private busi- ness; (6) acceleration of privatisation, including large and successful steps in the privatisation of some key sectors (energy, telecommunication). Finally the paper warns against excessive self- confidence and draws the attention to potential dangers. The macroeconomic improvement is still fragile. The most reassuring feature of Hungary s development is the impressive and persistent improvement of productivity.

Stabilization of troponin I for applications in clinical chemistry and forensic medicine. Cardiac troponin I: A time of death marker

Cardiac troponin I (cTnI) is one of the most useful serum marker test for the determination of myocardial infarction (MI). The first commercial assay of cTnI was released for medical use in the United States and Europe in 1995. It is useful in determining if the source of chest pains, whose etiology may be unknown, is cardiac related. Cardiac TnI is released into the bloodstream following myocardial necrosis (cardiac cell death) as a result of an infarct (heart attack). In this research project the utility of cardiac troponin I as a potential marker for the determination of time of death is investigated. The approach of this research is not to investigate cTnI degradation in serum/plasma, but to investigate the proteolytic breakdown of this protein in heart tissue postmortem. If our hypothesis is correct, cTnI might show a distinctive temporal degradation profile after death. This temporal profile may have potential as a time of death marker in forensic medicine. The field of time of death markers has lagged behind the great advances in technology since the late 1850's. Today medical examiners are using rudimentary time of death markers that offer limited reliability in the medico-legal arena. Cardiac TnI must be stabilized in order to avoid further degradation by proteases in the extraction process. Chemically derivatized magnetic microparticles were covalently linked to anti-cTnI monoclonal antibodies. A charge capture approach was also used to eliminate the antibody from the magnetic microparticles given the negative charge on the microparticles. The magnetic microparticles were used to extract cTnI from heart tissue homogenate for further bio-analysis. Cardiac TnI was eluted from the beads with a buffer and analyzed. This technique exploits banding pattern on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) followed by a western blot transfer to polyvinylidene fluoride (PVDF) paper for probing with anti-cTnI monoclonal antibodies. Bovine hearts were used as a model to establish the relationship of time of death and concentration/band-pattern given its homology to human cardiac TnI. The final concept feasibility was tested with human heart samples from cadavers with known time of death. ^

Drosophila Flight Stabilization Depends on Apparent Distances in Optic Flow Field

To perform daily flight tasks, insects rely heavily on their visual perception of a dynamic environment. They must process visual signals quickly and accurately and update their behavior. Flies are vulnerable to environmental disturbances, such as gusts of wind blowing them off course, but they may use the altered visual field to compensate and regain their original course. In studies using Drosophila melanogaster, it has been shown that their corrective responses can be analyzed by measuring changes in their wing beats. By enclosing a tethered fly in a cuboidal visual arena displaying a computerized optic flow field, it is possible to calculate the change in wing beat amplitudes from an infrared shadow of its wings using photodiodes and a custom wing beat analyzer. In this experiment, manipulations ofthe optic flow field are used to create a field where points have varying relative forward speed, to study how the insect performs corrective maneuvers. The results show that Drosophila have a stronger corrective response to the quickly moving, apparently near points compared to the slower moving, apparently distant points. This implies the flies are distinguishing points based on their relative speeds, inferring distance, and adjusting their corrective actions with this information.

Democratization, stabilization and social movements : the Bolivian case

In this thesis I assessed the state responses to social movements and in turn the impact of these movements on state policy within the context of the democratization occurring in Bolivia. The democratization process is affected by the conflict between political and economic goals. Politically the governments are faced with the demands from social groups. At the same time, the Bolivian government faces an economic crisis which requires stabilization, impairing the same individuals needed for legitimacy and political support. Two cases which depicted the key issues of this thesis are: the indigenous groups in the Bolivian Beni region and the coca growers, mainly of the Chapare area in the Cochabamba department of Bolivia. To achieve support and legitimacy, the new civilian administrations had no choice but to listen to the requests of the social mobilizations. Because of the economic crisis, conflicting domestic pressures and international influence, however, the government could not accede to all their demands.

The Central European initiative : an approach to regional stabilization and democratic consolidation

This thesis examines how multilateral institutions can contribute to democratization and regional stability. It is a case study of the Central European Initiative (CEI), a regional intergovernmental organization founded by Italy and Austria in 1989 to undertake a regional integration process, and of its role in stabilizing post-communist democracies. Documents were collected at the CEI offices in Trieste, Italy, and interviews conducted with CEI officers, and data obtained from the websites of related organizations and of CEI member countries. The thesis probes the relevance of concepts derived from theories of international regimes and social constructivism. It shows that the CEI diffuses norms and institutional rules conducive to consolidating democracies, including the development of a free civil society, a relatively autonomous political society, rule of law, state bureaucracies that are usable by the new democratic governments, and functioning free market economies, addition, and fosters habits of dialogue, socializes participants, and supports the creation of supra-national identities.

Study of porcelain-zirconia composites for dental applications

Materiais compósitos restauradores representam um dos mais bem sucedidos biomateriais na pesquisa moderna, na substituição do tecido biológico em aparência e função. Nesta linha, a porcelana feldspática tem sido largamente usada em odontologia devido suas interessantes qualidades como estabilidade de cor, propriedades estéticas, elevada durabilidade mecânica, biocompatibilidade, baixa condutividade térmica e elevada resistência ao desgaste. Entretanto, este material é frágil e pode falhar em ambiente oral devido ao micro-vazamento, baixa resistência à tração, descolagem ou fratura. Assim, para melhorar as propriedades mecânicas da porcelana, a zircônia parcialmente estabilizada com Ítria (Y-TZP) pode ser uma boa alternativa para fortalecer e produzir infraestruturas totalmente cerâmicas (coroas e próteses parciais fixas). Portanto, este estudo tem por objetivo avaliar as propriedades mecânicas e características microestruturais da porcelana reforçada com zircônia (3Y-TZP) em diferentes conteúdos e as variáveis que afetam as propriedades mecânicas destes materiais. O estudo de caracterização revelou que a zircônia comercial apresenta melhores resultados quando comparada com a zircônia sintetizada pelo CPM. Assim, os estudos seguintes utilizaram a zircônia comercial para todos os testes requeridos. As partículas de zircônia apresentam elevadas propriedades mecânicas quando comparadas a zircônia aglomerada. Os diferentes conteúdos revelam que as propriedades mecânicas dos compósitos aumentam com o aumento do conteúdo volumétrico até 30% vol.% (198,5Mpa), ou seja, maior resistência à flexão quando comparada com os outros compósitos. Do mesmo modo, a resistência ao desgaste para os compósitos com (30%, vol.% de zircônia) apresenta valores superiores quando comparado aos demais compósitos. Na adesão cerâmico-cerâmico a porcelana exibe elevada adesão para a superfície de zircônia porosa quando comparada a superfície rugosa. Os furos superficiais (PZ) e aplicação de compósitos com camada intermediária (RZI) na zircônia causam separadamente uma melhoria da resistência ao cisalhamento da zircônia-porcelana quando comparados as amostras convencionais de zircônia-porcelana (RZ), embora não sejam estatisticamente significativas (p>0.05). A presença de uma camada intermediaria produz um aumento significativo na força de ligação (~55%) em relação as amostras convencionais (RZ). Portanto, a correta a correta configuração e tratamento superficial podem produzir subestruturas com qualidade e força de ligação adequadas aos requisitos odontológicos.

Selective gas phase hydrogenation of p-nitrobenzonitrile to p-aminobenzonitrile over zirconia supported gold

We acknowledge the contribution of Dr. N. Perret to this work. EPSRC support for free access to the TEM/SEM facility at the University of St. Andrews and financial support to Dr. X. Wang and Y. Hao through the Overseas Research Students Award Scheme (ORSAS) are also acknowledged.