Exploring Vertex Interactions in Ferroelectric Flux-Closure Domains

Using piezoresponse force microscopy, we have observed the progressive development of ferroelectric flux-closure domain structures and Landau−Kittel-type domain patterns, in 300 nm thick single-crystal BaTiO3 platelets. As the microstructural development proceeds, the rate of change of the domain configuration is seen to decrease exponentially. Nevertheless, domain wall velocities throughout are commensurate with creep processes in oxide ferroelectrics. Progressive screening of macroscopic destabilizing fields, primarily the surface-related depolarizing field, successfully describes the main features of the observed kinetics. Changes in the separation of domain-wall vertex junctions prompt a consideration that vertex−vertex interactions could be influencing the measured kinetics. However, the expected dynamic signatures associated with direct vertex−vertex interactions are not resolved. If present, our measurements confine the length scale for interaction between vertices to the order of a few hundred nanometers.

Instructional Methods For Optimal Learning For An Aerospace Assembly Task: digital animation v pictogram-based instructions

Previous studies on work instruction delivery for complex assembly tasks have shown that the mode and delivery method for the instructions in an engineering context can influence both build time and product quality. The benefits of digital, animated instructional formats when compared to static pictures and text only formats have already been demonstrated. Although pictograms have found applications for relatively straight forward operations and activities, their applicability to relatively complex assembly tasks has yet to be demonstrated. This study compares animated instructions and pictograms for the assembly of an aircraft panel. Based around a series of build experiments, the work records build time as well as the number of media references to measure and compare build efficiency. The number of build errors and the time required to correct them is also recorded. The experiments included five participants completing five builds over five consecutive days for each media type. Results showed that on average the total build time was 13.1% lower for the group using animated instructions. The benefit of animated instructions on build time was most prominent in the first three builds, by build four this benefit had disappeared. There were a similar number of instructional references for the two groups over the five builds but the pictogram users required a lot more references during build 1. There were more errors among the group using pictograms requiring more time for corrections during the build.

Is there a common water-activity limit for the three domains of life?

Archaea and Bacteria constitute a majority of life systems on Earth but have long been considered inferior to Eukarya in terms of solute tolerance. Whereas the most halophilic prokaryotes are known for an ability to multiply at saturated NaCl (water activity (a_w) 0.755) some xerophilic fungi can germinate, usually at high-sugar concentrations, at values as low as 0.650–0.605 a_w. Here, we present evidence that halophilic prokayotes can grow down to water activities of <0.755 for Halanaerobium lacusrosei (0.748), Halobacterium strain 004.1 (0.728), Halobacterium sp. NRC-1 and Halococcus morrhuae (0.717), Haloquadratum walsbyi (0.709), Halococcus salifodinae (0.693), Halobacterium noricense (0.687), Natrinema pallidum (0.681) and haloarchaeal strains GN-2 and GN-5 (0.635 a_w). Furthermore, extrapolation of growth curves (prone to giving conservative estimates) indicated theoretical minima down to 0.611 a_w for extreme, obligately halophilic Archaea and Bacteria. These were compared with minima for the most solute-tolerant Bacteria in high-sugar (or other non-saline) media (Mycobacterium spp., Tetragenococcus halophilus, Saccharibacter floricola, Staphylococcus aureus and so on) and eukaryotic microbes in saline (Wallemia spp., Basipetospora halophila, Dunaliella spp. and so on) and high-sugar substrates (for example, Xeromyces bisporus, Zygosaccharomyces rouxii, Aspergillus and Eurotium spp.). We also manipulated the balance of chaotropic and kosmotropic stressors for the extreme, xerophilic fungi Aspergillus penicilloides and X. bisporus and, via this approach, their established water-activity limits for mycelial growth (~0.65) were reduced to 0.640. Furthermore, extrapolations indicated theoretical limits of 0.632 and 0.636 a_w for A. penicilloides and X. bisporus, respectively. Collectively, these findings suggest that there is a common water-activity limit that is determined by physicochemical constraints for the three domains of life.

Simulation using novel equipment designed to explain spirometric abnormalities in respiratory disease enhances learning in higher cognitive domains

Simulation of disorders of respiratory mechanics shown by spirometry provides insight into the pathophysiology of disease but some clinically important disorders have not been simulated and none have been formally evaluated for education. We have designed simple mechanical devices which, along with existing simulators, enable all the main dysfunctions which have diagnostic value in spirometry to be simulated and clearly explained with visual and haptic feedback. We modelled the airways as Starling resistors by a clearly visible mechanical action to simulate intra- and extra-thoracic obstruction. A narrow tube was used to simulate fixed large airway obstruction and inelastic bands to simulate restriction. We hypothesized that using simulators whose action explains disease promotes learning especially in higher domain educational objectives. The main features of obstruction and restriction were correctly simulated. Simulation of variable extra-thoracic obstruction caused blunting and plateauing of inspiratory flow, and simulation of intra-thoracic obstruction caused limitation of expiratory flow with marked dynamic compression. Multiple choice tests were created with questions allocated to lower (remember and understand) or higher cognitive domains (apply, analyse and evaluate). In a cross-over design, overall mean scores increased after 1½ h simulation spirometry (43-68 %, effect size 1.06, P < 0.0001). In higher cognitive domains the mean score was lower before and increased further than lower domains (Δ 30 vs 20 %, higher vs lower effect size 0.22, P < 0.05). In conclusion, the devices successfully simulate various patterns of obstruction and restriction. Using these devices medical students achieved marked enhancement of learning especially in higher cognitive domains.

Enabling Others in Social Work: Reflexivity and the Theory of Social Domains

This paper sets out a framework to structure reflexivity in social work practice. Based on the thinking of the sociologist, Derek Layder, it comprises five domains that impact on the individual and social life, namely: (i) psycho-biography – referring to a person’s unique experience throughout the life-course; (ii) situated activity – highlighting the impact of every day social interaction; (iii) social settings – addressing the role of organizations in social life; (iv) culture – covering the influence of attitudes, beliefs, tastes and ideas on symbolic meaning; and (v) politico-economy – alluding to the ramifications of political and economic forces on people’s lives. It is contended that power circulates throughout each domain as an enabling and constraining force. The paper then outlines a process for using the reflexive framework in ‘enabling’ activities such as practice learning, supervision, mentoring and coaching. By applying the framework in these contexts, it is argued that social workers can reflect critically on their role and develop emancipatory forms of practice.

Efficiently Scheduling Task Dataflow Parallelism: A Comparison Between Swan and QUARK

Increased system variability and irregularity of parallelism in applications put increasing demands on the ef- ficiency of dynamic task schedulers. This paper presents a new design for a work-stealing scheduler supporting both Cilk- style recursively parallel code and parallelism deduced from dataflow dependences. Initial evaluation on a set of linear algebra kernels demonstrates that our scheduler outperforms PLASMA’s QUARK scheduler by up to 12% on a 16-thread Intel Xeon and by up to 50% on a 32-thread AMD Bulldozer.

Olefin / Paraffin separation using Task-Specific Materials based on Ionic Liquids: Advances in Gas Processing

In this work, 1-hexene was extracted from its mixtures with n-hexane in varying ratios using a task specific ionic liquid. Herein, the ionic liquid (IL) 1-butyl-3-methylimidazolium nitrate, [BMIM][NO3], was used and examined with and without the addition of a metal salt. The impact of water on both selectivity and distribution coefficient was also tested. Four potential metal salts were investigated, the results of which demonstrate that the dissolution of transition-metal salts in the IL improves the separation of 1-hexene from n-hexane through metal-olefin complexation. Additionally, the presence of water in IL solutions containing metal salt enhances this selectivity. Finally, UNIFAC was used to correlate the experimental LLE data with good accuracy.

Reviewing the Literature on the Breakdown of Foster Care Placements for Young People: Complexity and the Social Work Task

Young people in long-term foster care are at risk of experiencing poor social, emotional, behavioural and educational outcomes. Moreover, these placements have a significantly greater chance of breaking down compared to those involving children. This article critically evaluates the factors associated with this particular outcome. It was carried out through a literature review conducted by a social work practitioner in one Health and Social Care Trust in Northern Ireland. The findings evidenced that, apart from overriding safety concerns, placement breakdown was not a one-off event but rather a complex process involving the interplay between a range of dynamic risk and protective factors over time, operating in the wider context of the young person’s history and life experiences. The significance of these findings for social work practitioners is finally considered by identifying key theories to inform understanding and intervention.

Defining the content and delivery of an intervention to Change AdhereNce to treatment in BonchiEctasis (CAN-BE): a qualitative approach incorporating the Theoretical Domains Framework, behavioural change techniques and stakeholder expert panels

Background
Low patient adherence to treatment is associated with poorer health outcomes in bronchiectasis. We sought to use the Theoretical Domains Framework (TDF) (a framework derived from 33 psychological theories) and behavioural change techniques (BCTs) to define the content of an intervention to change patients’ adherence in bronchiectasis (Stage 1 and 2) and stakeholder expert panels to define its delivery (Stage 3).

Methods
We conducted semi-structured interviews with patients with bronchiectasis about barriers and motivators to adherence to treatment and focus groups or interviews with bronchiectasis healthcare professionals (HCPs) about their ability to change patients’ adherence to treatment. We coded these data to the 12 domain TDF to identify relevant domains for patients and HCPs (Stage 1). Three researchers independently mapped relevant domains for patients and HCPs to a list of 35 BCTs to identify two lists (patient and HCP) of potential BCTs for inclusion (Stage 2). We presented these lists to three expert panels (two with patients and one with HCPs/academics from across the UK). We asked panels who the intervention should target, who should deliver it, at what intensity, in what format and setting, and using which outcome measures (Stage 3).

Results
Eight TDF domains were perceived to influence patients’ and HCPs’ behaviours: Knowledge, Skills, Beliefs about capability, Beliefs about consequences, Motivation, Social influences, Behavioural regulation and Nature of behaviours (Stage 1). Twelve BCTs common to patients and HCPs were included in the intervention: Monitoring, Self-monitoring, Feedback, Action planning, Problem solving, Persuasive communication, Goal/target specified:behaviour/outcome, Information regarding behaviour/outcome, Role play, Social support and Cognitive restructuring (Stage 2). Participants thought that an individualised combination of these BCTs should be delivered to all patients, by a member of staff, over several one-to-one and/or group visits in secondary care. Efficacy should be measured using pulmonary exacerbations, hospital admissions and quality of life (Stage 3).

Conclusions
Twelve BCTs form the intervention content. An individualised selection from these 12 BCTs will be delivered to all patients over several face-to-face visits in secondary care. Future research should focus on developing physical materials to aid delivery of the intervention prior to feasibility and pilot testing. If effective, this intervention may improve adherence and health outcomes for those with bronchiectasis in the future.

Mineralisation of 2,4-dichlorophenol and glucose placed into the same or different hydrological domains as a bacterial inoculant

The spatial location of microorganisms in the soil three-dimensional structure with respect to their substrates plays an important role in the persistence and turnover of natural and xenobiotic organic compounds. To study the effect of spatial location on the mineralisation of ¹⁴C-2,4-dichlorophenol (2,4-DCP, 0.15 or 0.31 μmol g^-1) and ¹⁴C-glucose (2.77 μmol g^-1), columns packed with autoclaved soil aggregates (2-5 mm) were used. Using a chloride tracer of water movement, the existence of 'immobile' water, which was by-passed by preferentially flowing 'mobile' water, was demonstrated. By manipulation of the soil moisture content, the substrates were putatively placed to these conceptual hydrological domains (immobile and mobile water). Leaching studies revealed that approximately 1.7 (glucose) and 3.4 (2.4-DCP) times the amount of substrate placed in mobile water was recovered in the first 4 fractions of leachate when compared to substrate placed in immobile water. The marked difference in the breakthrough curves was taken as evidence of successful substrate placement. The 2,4-DCP degrading bacterium, Burkholderia sp. RASCc2, was inoculated in mobile water (1.8-5.2 × 10⁷ cells g^-1 soil) and parameters (asymptote, time at maximum rate, calculated maximum rate) describing the mineralisation kinetics of 2,4-DCP and glucose previously added to immobile or mobile water domains were compared, For glucose, there was no significant effect (P > 0.1) of substrate placement on any of the mineralisation parameters. However, substrate placement had a significant effect (P < 0.05) on parameters describing 2,4-DCP mineralisation. In particular, 2,4-DCP added in mobile water was mineralised with a greater maximum rate and with a reduced time at maximum rate when compared to 2,4-DCP added to immobile water. The difference in response between the two test substrates may reflect the importance of sorption in controlling the spatial bioavailability of compounds in soil. © 2002 Elsevier Science Ltd. All rights reserved.