The impact of structured teaching methods on the quality of education

This paper estimates the impact of the use of structured methods on the quality of education of the students in primary public school in Brazil. Structure methods encompass a range of pedagogical and managerial instruments applied to the education system. In recent years, several municipalities in the State of São Paulo have contracted out private educational providers to implement these structured methods in their schooling system. Their pedagogical proposal involves structuring curriculum contents, elaboration and use of teachers and students textbooks, and training and supervision of the teachers and instructors. Using a difference in differences estimation strategy, we find that the fourth and eighth grader students in the municipalities with structured methods performed better in Portuguese and Math than students in municipalities not exposed to the methods. We find no differences in approval rates. However, a robustness check is not able to discard the possibility that unobserved municipal characteristics may affect the results.

Tree-structured smooth transition models

The goal of this paper is to introduce a class of tree-structured models that combines aspects of regression trees and smooth transition regression models. The model is called the Smooth Transition Regression Tree (STR-Tree). The main idea relies on specifying a multiple-regime parametric model through a tree-growing procedure with smooth transitions among different regimes. Decisions about splits are entirely based on a sequence of Lagrange Multiplier (LM) tests of hypotheses.

Performance and intestinal mucosa development of broiler chickens fed diets containing Saccharomyces cerevisiae cell wall

Use of antibiotics as an additive in poultry diets to improve growth has been discussed in relation to bacterial resistance and the development of new products and management practices. This study was carried out to test the efficacy of a new substance (Saccharomyces cereviside cell walls, var. Calsberg- SCCW) obtained from the brewery industry, added (at 0.1 and 0.2%) to broiler chicken diets (based on corn and soybean meal), on performance and intestinal mucosa development. In Experiment 1 (carried out in litter-floor pens) the results revealed higher body weight gain,for the total experimental period and higher villus height at 7 d of age for the birds fed 0.2%,SCCW. In a field test using 44,000 broilers that,received feed containing 0.2% SCCW,. The results also showed higher body weight gain and better feed conversion for SCCW-supplemented birds. The present findings show that SCCW improved body weight gain in broiler chickens and that this effect can be attributed to the trophic effect of this product on the intestinal mucosa, because it increases villus height, particularly during the first 7. d of a chicken's life.

Saccharomyces Cerevisiae cell wall dietary supplementation on the performance and intestinal mucosa development and integrity of broiler chickens vaccinated against coccidiosis

This study was carried out to verify if Saccharomyces cerevisiae cell wall (SCCW) dietary supplementation (0.2%) was capable of protecting the intestinal mucosa of broiler chickens vaccinated against coccidiosis. Body weight gain, feed intake, feed conversion and intestinal mucosa morphometric parameters and epithelial loss were evaluated. In the experiment,400 day-old male chicks were distributed according to a completely randomized design in a 2x2 factorial arrangement. The following treatments were applied: T1 - no vaccination/ no SCCW supplementation; T2 - no vaccination/SCCW supplementation; T3 - vaccination/no SCCW supplementation; and T4 - vaccination/SCCW supplementation to four replicates of 25 birds each. Birds were vaccinated on the first day of age using a spray vaccine (Coccivac B®, Coopers), containing E. acervulina, E. maxima, E. mivati and E. tenella. S. cerevisiae cell wall was supplied from the first day of age. Live performance, intestinal morphometric parameters and epithelial loss were evaluated at 14, 21 and 28 days of age. Performance was affected by vaccination only at 21-days of age, when body weight gain was reduced in the vaccinated birds, but no body weight difference was observed on day 28. Vaccine also increased the crypt depth (p<0.05) in the duodenum and jejunum, suggesting a high cell activity in the crypt:villus transition area to maintain the epithelial cell turnover. Villi number/area (103,269 µm²) was not affected (p>0.05) by vaccine or cell wall supplementation, and epithelial loss was more pronounced in the duodenum and jejunum. In conclusion, the findings of this study suggest that S. cerevisiae cell wall supplementation may be an useful management tool to maintain the intestinal integrity of broilers vaccinated against coccidiosis.

Evaluation of yeast cell wall on the performance of broiles fed diets with or without mycotoxins

This experiment aimed at evaluating the effects of the interactions between aflatoxin (500 or 250 ppb) and ochratoxin (500 or 250 ppb), and the possible benefits of adding yeast cell wall to prevent the effects of these mycotoxins in broiler chickens. Relative organ weight gain and live performance were evaluated at 21 and 42 days of age. Results indicated that at the levels of mycotoxins included in the experimental diets, ochratoxin reduced feed intake and body weight gain, and aflatoxin only affect feed intake of 21-day-old birds. No interaction was observed between aflatoxin and ochratoxin at the levels used in experimental study. Yeast cell wall did not significantly reduced the deleterious effects of ochratoxins. No significant differences were observed in relative organ weight gain. Yeast cell wall improved feed conversion ratio when birds were fed either contaminated or non-contaminated feeds.

Avaliação por pig de perfilagem de danos superfciais nos materiais das paredes de dutos de petróleo

The modern technology of materials and structural integrity of pipelines requests the use of inspection tools named inspection pigs to detect, localize and measure the length, width and depth dimensions of the thickness losses of walls of buried and underwater pipelines in service. These tools run them internally, performing and recording measurements, with performance that varies according to the pig s technology. It has been developed recently an instrumented pig technology, called feller pig. This work aims to indicate factors that influence the feller pig technology performance in the detection and in the accuracy of measurement of the length, width and depth dimensions of the thickness losses on the internal surface of an oil pipeline wall under normal conditions of oil pipe inspection with pig. In this work, is made a collection of factors and an analyses of the technology based on the available literature, as well as an experiment to observe the technology and the factors operating. In the experiment, a feeler pig is used in a pipeline built in carbon steel and in operation that flows petroleum, in witch are observed areas with internal thickness losses occurred naturally. Some of these areas and their dimensions taken by automated ultra-sound scanner are compared with the ones indicated by the feller pig. Based on the data collection, on the analysis and on the experiment, the influence of factors object of this research is discussed. It is concluded that, among these, there are factors related to pipe fabrication tolerances, to wear of pig components, to internal adhesive wear of pipeline, to other pipeline damages and to technology characteristics. Finally, actions are suggested to know better, improve and define the applicability of this technology

Medição e modelagem da resposta de um sensor de pig perfilométrico sob diferentes solicitações dinâmicas

Ensure the integrity of the pipeline network is an extremely important factor in the oil and gas industry. The engineering of pipelines uses sophisticated robotic inspection tools in-line known as instrumented pigs. Several relevant factors difficult the inspection of pipelines, especially in offshore field which uses pipelines with multi-diameters, radii of curvature accentuated, wall thickness of the pipe above the conventional, multi-phase flow and so on. Within this context, appeared a new instrumented Pig, called Feeler PIG, for detection and sizing of thickness loss in pipelines with internal damage. This tool was developed to overcome several limitations that other conventional instrumented pigs have during the inspection. Several factors influence the measurement errors of the pig affecting the reliability of the results. This work shows different operating conditions and provides a test rig for feeler sensors of an inspection pig under different dynamic loads. The results of measurements of the damage type of shoulder and holes in a cyclic flat surface are evaluated, as well as a mathematical model for the sensor response and their errors from the actual behavior

Tubulações de PRFV com adição de areia quartzosa visando sua aplicação na indústria do petróleo

Fillers are often added in composites to enhance performance and/or to reduce cost. Fiberglass pipes must meet performance requirements and industrial sand is frequently added for the pipe to be cost competitive. The sand is added to increase pipe wall thickness, thus increase pipe stiffness. The main goal of the present work is to conduct an experimental investigation between pipes fabricated with and without de addition of sand, to be used in the petroleum industry. Pipes were built using E-glass fibers, polyester resin and siliceous sand. The fabrication process used hand lay up and filament winding and was divided in two different parts: the liner and the structural wall. All tested pipes had the same liner, but different structural wall composition, which is the layer where siliceous sand may be added or not. The comparative investigation was developed considering the results of longitudinal tensile tests, hoop tensile tests, hydrostatic pressure leak tests and parallel-plate loading stiffness tests. SEM was used to analyze if the sand caused any damage to the glass fibers, during the fabrication process, because of the fiber-sand contact. The procedure was also used to verify the composite conditions after the hydrostatic pressure leak test. The results proved that the addition of siliceous sand reduced the leak pressure in about 17 %. In the other hand, this loss in pressure was compensated by a stiffness increment of more than 380 %. MEV analyses show that it is possible to find damage on the fiber-sand contact, but on a very small amount. On most cases, the contact occurs without damage evidences. In summary, the addition of sand filler represented a 27.8 % of cost reduction, when compared to a pipe designed with glass fiber and resin only. This cost reduction combined to the good mechanical tests results make siliceous sand filler suitable for fiberglass pressure pipes

Thermogravimetric studies of decomposition kinetics of six different IAC Hevea rubber clones using Flynn-Wall-Ozawa approach

The thermal degradation behaviour of rubber from six new Hevea brasiliensis clones (IAC 40, 56, 300, 301, 302 and 303) from São Paulo State, Brazil was studied by thermogravimetry using the Flynn-Wall-Ozawa approach to assess the kinetic parameters ( reaction order, activation energy and pre-exponential factor) of the decomposition process. This study indicated that the thermal behaviour is a complex multiple step process, which depends on the type of rubber Hevea clones studied. The rubber from these clones can be classified, following the order of decreasing thermal stability, as IAC 303 > 302 > 56 > 40 > 300 > 301.

Characterization of Paracoccidioides brasiliensis PbDfg5p, a cell-wall protein implicated in filamentous growth

The dimorphic fungus Paracoccidioides brasiliensis is the causative agent of the most frequent systemic mycosis in Latin America. In humans, infection starts by inhalation of fungal propagules, which reach the pulmonary epithelium and differentiate into the yeast parasitic phase. Here we describe the characterization of a Dfg5p ((d) under bar efective for (f) under bar ilamentous (g) under bar rowth) homologue of P. brasiliensis, a predictable cell wall protein, first identified in Saccharomyces cerevisiae. The protein, the cDNA and genomic sequences were analysed. The cloned cDNA was expressed in Escherichia coli and the purified rPbDfg5p was used to obtain polyclonal antibodies. Immunoelectron microscopy and biochemical studies demonstrated the presence of PbDfg5p in the fungal cell wall. Enzymatic treatments identified PbDfg5p as a beta-glucan linked protein that undergoes N -glycosylation. The rPbDfg5p bound to extracellular matrix components, indicating that those interactions could be important for initial steps leading to P. brasiliensis attachment and colonization of host tissues. The P. brasiliensis dfg5 nucleotide and deduced protein, PbDfg5p, sequences reported in this paper had been submitted to the GenBank database under Accession Nos AY307855 (cDNA) and DQ534495 (genomic). Copyright (C) 2007 John Wiley & Sons, Ltd.

Direct observation of oxidative stress on the cell wall of Saccharomyces cerevisiae strains with atomic force microscopy

We imaged pores on the surface of the cell wall of three different industrial strains of Saccharomyces cerevisiae using atomic force microscopy. The pores could be enlarged using 10 mM diamide, an SH residue oxidant that attacks surface proteins. We found that two strains showed signs of oxidative damage via changes in density and diameter of the surface pores. We found that the German strain was resistant to diamide induced oxidative damage, even when the concentration of the oxidant was increased to 50 mM. The normal pore size found on the cell walls of American strains had diameters of about 200nm. Under conditions of oxidative stress the diameters changed to 400nm.This method may prove to be a useful rapid screening process (45-60 min) to determine which strains are oxidative resistant, as well as being able to screen for groups of yeast that are sensitive to oxidative stress. This rapid screening tool may have direct applications in molecular biology (transference of the genes to inside of living cells) and biotechnology (biotransformations reactions to produce chiral synthons in organic chemistry.

Digital radiography using digital detector arrays fulfills critical applications for offshore pipelines

Digital radiography in the inspection of welded pipes to be installed under deep water offshore gas and oil pipelines, like a presalt in Brazil, in the paper has been investigated. The aim is to use digital radiography for nondestructive testing of welds as it is already in use in the medical, aerospace, security, automotive, and petrochemical sectors. Among the current options, the DDA (Digital Detector Array) is considered as one of the best solutions to replace industrial films, as well as to increase the sensitivity to reduce the inspection cycle time. This paper shows the results of this new technique, comparing it to radiography with industrial films systems. In this paper, 20 test specimens of longitudinal welded pipe joints, specially prepared with artificial defects like cracks, lack of fusion, lack of penetration, and porosities and slag inclusions with varying dimensions and in 06 different base metal wall thicknesses, were tested and a comparison of the techniques was made. These experiments verified the purposed rules for parameter definitions and selections to control the required digital radiographic image quality as described in the draft international standard ISO/DIS 10893-7. This draft is first standard establishing the parameters for digital radiography on weld seam of welded steel pipes for pressure purposes to be used on gas and oil pipelines.

Mast cell and eosinophils in the wall of the gut and eosinophils in the blood stream during Toxocara vitulorum infection of the water buffalo calves (Bubalus bubalis)

Toxocara vitulorum is a pathogenic nematode from the small intestine of very young buffalo calves. To understand the development of the inflammatory responses in the wall of the gut, samples of tissues were removed from the duodenum, jejunum and ileum of buffalo calves naturally infected with T. vitulorum during the beginning of the infection, at the peak of egg output, as well as during the periods of rejection of the worms and post-rejection. Two additional control groups of uninfected calves (by anti-helminthic therapy of their mothers and after the birth) were also necropsied on days 30 and 50 after birth. Blood samples were fortnightly collected from birth to 174 days post-birth. Blood smears were prepared and stained with Giemsa for eosinophils. The parasitological status of buffalo calves was evaluated through weekly fecal egg counts (EPG) from 1 to 106 days after birth, which revealed that T. vitulorum egg shedding started on day 11, reached the peak of the infection on day 49 and finally expelled the parasites between days 50 and 85 after birth. In the infected buffalo calves, the mast cell population increased significantly, by two-fold in the mucosa (villus-crypt unit (VCU)) of the duodenum and four-fold in the proximal jejunum; but these increases were statistically significant only at the peak of the infection. Although mast cell numbers increased in the mucosa of the ileum as well as in both the submucosal and muscle tissues of the duodenum, proximal jejunum and ileum, the data was not significantly different from the controls. Eosinophil numbers increased in the mucosa of the duodenum (two-five times higher than the control) and proximal jejunum (three-five-fold) during the period of the infection (beginning, peak and rejection). The relative numbers of eosinophils increased in the blood stream from the second to the seventh week. In conclusion, T. vitulorum infection elicited mastocytosis and tissue eosinophilia in the duodenum and proximal jejunum, as well as eosinophilia in the blood stream, during the beginning, at the peak and during the rejection of the worm. After the rejection of the worms, the numbers of these cells returned to normal levels suggesting that these cells may have a role in the process of rejection of T. vitulorum by the host. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Experimental Investigation into the Characteristics of In-Pipe Leak Noise in Plastic Water Filled Pipes

This paper presents an experimental investigation of the characteristics of leak noise in plastic water-filled pipes. An experimental set-up was designed to identify the physical mechanisms of leak noise generation. Possible mechanisms include cavitation and turbulence. The experiments show that cavitation is not responsible for leak noise generation and clearly indicate that turbulence is the main mechanism, at least in the experiments conducted. An alternative experimental set-up was also designed to identify the characteristics of leak noise spectra and to investigate how the spectra are affected by the leak size and the leak flow velocity. A number of different hole sizes (leaks) starting from 1 mm diameter, increasing progressively every 0.5 mm until a size of 4 mm diameter were tested for different jet velocities and an empirical model that describes this behaviour is proposed.