c&d-learning implementation architecture: Adapting e-learning to developing countries

From the educational point of view, the most widespread method in developing countries is on-site education. Technical and economic resources cannot support conventional distance learning infrastructures and it is even worse for courses in universities. They usually suffer a lack of qualified faculty staff, especially in technical degrees. The literature suggest that e-learning is a suitable solution for this problem, but its methods are developed attending to educational necessities of the First World and cannot be applied directly to other contexts. The proposed methodology is a variant of traditional e-learning adapted to the needs of developing countries. E-learning for Cooperation and Development (c&d-learning) is oriented to be used for educational institutions without adequate technical or human resources. In this paper we describe the c&d-learning implementation architecture based on three main phases: hardware, communication and software; e.g. computer and technical equipping, internet accessing and e-learning platform adaptation. Proper adaptation of educational contents to c&d-learning is discussed and a real case of application in which the authors are involved is described: the Ngozi University at Burundi.

Experiences in the assessment of the requirement management process

The focus of this paper is to outline the practical experiences and the lessons learned derived from the assessment of the requirements management process in two industrial case studies. Furthermore this paper explains the main structure of an alternative assessment approach that has been used in the appraisal of the two case studies. The assessment approach helped us to know the current state of the organizational requirement management process. We have to point out that these practical experiences and the lessons learned can be helpful to reduce risks and costs of the on-site assessment process.

Evaluation and improvement of empirical models of global solar irradiation: Case study northern Spain

This paper presents a new methodology to build parametric models to estimate global solar irradiation adjusted to specific on-site characteristics based on the evaluation of variable im- portance. Thus, those variables higly correlated to solar irradiation on a site are implemented in the model and therefore, different models might be proposed under different climates. This methodology is applied in a study case in La Rioja region (northern Spain). A new model is proposed and evaluated on stability and accuracy against a review of twenty-two already exist- ing parametric models based on temperatures and rainfall in seventeen meteorological stations in La Rioja. The methodology of model evaluation is based on bootstrapping, which leads to achieve a high level of confidence in model calibration and validation from short time series (in this case five years, from 2007 to 2011). The model proposed improves the estimates of the other twenty-two models with average mean absolute error (MAE) of 2.195 MJ/m2 day and average confidence interval width (95% C.I., n=100) of 0.261 MJ/m2 day. 41.65% of the daily residuals in the case of SIAR and 20.12% in that of SOS Rioja fall within the uncertainty tolerance of the pyranometers of the two networks (10% and 5%, respectively). Relative differences between measured and estimated irradiation on an annual cumulative basis are below 4.82%. Thus, the proposed model might be useful to estimate annual sums of global solar irradiation, reaching insignificant differences between measurements from pyranometers.

Caracterización y optimización de un sistema de sonido profesional

El presente proyecto tiene como objeto caracterizar y optimizar un equipo de sonido profesional, entendiendo por “caracterizar” el determinar los atributos particulares de cada uno de los componentes integrados en el sistema, y entendiendo por “optimizar” el hallar la mejor manera de obtener una respuesta plana para todo el rango de frecuencias, libre de distorsión, y en la mayor área posible. El sistema de sonido utilizado pertenece a un grupo musical de directo, por lo que se instala y se configura en cada concierto en función de las características del recinto, sea cerrado o al aire libre. Con independencia de estas particularidades, el sistema completo se divide en dos formaciones, L y R (lado izquierdo y lado derecho del escenario), por lo que cada formación se compone de un procesador digital de la señal, cuatro etapas de amplificación, un sistema line array de ocho unidades, y un conjunto de ocho altavoces de subgraves. Para llevar a cabo el objetivo planteado, se ha dividido el proyecto en las fases que a continuación se describen. En primer lugar, se han realizado, en la cámara anecoica de la EUITT, las medidas que permiten obtener las características de cada uno de los elementos que componen el sistema. Estas medidas se han almacenado en formato ASCII. En segundo lugar, se ha diseñado una interfaz gráfica que permite, utilizando las medidas almacenadas, caracterizar tanto la respuesta individual de cada elemento de la cadena del sistema de sonido como la respuesta combinada de una unidad line array y una unidad de subgraves. La interfaz es interactiva, y tiene además la capacidad de entregar automáticamente los valores de configuración que permiten la optimización del conjunto. Esto es, obtener alineamiento en el rango de frecuencias compartido por ambas unidades. Las medidas realizadas en la cámara anecoica se han utilizado igualmente para modelar el sistema line array al completo y poder realizar simulaciones en campo libre utilizando programas de predicción acústica. Se ha experimentado con los valores de configuración que permiten el alineamiento de los elementos individuales y obtenidos a través de la interfaz desarrollada, para comprobar la validez de los mismos con la formación line array y subgraves al completo. Por otro lado, se han analizado los métodos de optimización de sistemas propuestos por profesionales reconocidos del medio con el objetivo de aplicarlos en un evento real. En la preparación y montaje del evento, se han aplicado los valores de configuración proporcionados por la interfaz, y se ha comprobado la validez de los mismos realizando medidas in situ según los criterios propuestos en los métodos de optimización estudiados. ABSTRACT. This project aims to characterize and optimize a professional sound system. Characterize must be understood as determining the particular attributes of each component integrated in the system; optimize must be understood as finding the best way to get a flat response for all the frequency range, distortion free, in the largest possible area. The sound system under test belongs to a live musical group, so it is setup and configured on each concert depending on the characteristics of the enclosure, whether it’s indoor or outdoor. Apart from these features, the whole system is divided into two clusters, L and R (left and right side of the stage), so that each one is provided with a digital signal processor, four amplification stages, an eight-units line array system, and a set of eight subwoofers . To accomplish the stated objective, the project has been divided into the steps described below. To begin with, measures have been realized in the anechoic chamber of EUITT, which make possible obtaining the characteristics of each of the elements of the system. These measures have been stored in ASCII format. Then, a graphical interface has been designed that allow, using the stored measurements and from graphics, to characterize both the individual response of each element of the string sound system and the combined response of the several elements. The interface is interactive, and also has the ability to automatically deliver the configuration settings that allow the whole optimization. That means to get alignment in the frequency range shared by a line array unit and a subwoofer unit. The measurements made in the anechoic chamber have also been used to model the complete line array system and to perform free-field simulations using acoustical prediction programs. Simulations have been done with the configuration settings that allow the individual elements alignment (provided by the graphical interface developed), in order to check their validity with the full line array and subwoofer systems. On the other hand, analysis about the optimization methods, proposed by renowned professionals of the field, has been made in order to apply them in a real concert. In the setup and assembly of the event, configuration settings provided by the interface have been applied. Their validity has been proved by making measures on-site according to the criteria set in the studied optimization methods.

Estudio Acústico del Teatro Tomás y Valiente de Fuenlabrada

El objetivo de este Proyecto Fin de Carrera es realizar el estudio de las características acústicas del Teatro Tomás y Valiente de Fuenlabrada mediante medidas y con el apoyo de los resultados obtenidos mediante la simulación del campo sonoro. El recinto está destinado principalmente a representaciones teatrales, empleándose también como sala polivalente, de forma que se analizará su comportamiento acústico e idoneidad ante la variedad de usos a los que se destina. Para ello, se realizan medidas experimentales in situ de todos los parámetros representativos de un recinto acústico y la predicción de los mismos mediante la simulación de la sala a través del software de simulación acústica EASE, de forma que las características acústicas obtenidas mediante ambos procesos sean comparadas proponiéndose mejoras en el entorno para cumplimiento de parámetros acústicos óptimos exigibles a la sala. En primer lugar se exponen los principales conceptos teóricos a tener en cuenta en el ámbito de la acústica, detallando las diferentes teorías de estudio, los principios básicos de la psicoacústica. Además, se definen los criterios utilizados en el diseño de recintos acústicos y parámetros que definan la calidad según el uso al que se destine en función del estudio de la utilización habitual de la sala y valores óptimos de los parámetros acústicos correspondientes a salas de tamaño y uso similar. A continuación, se describe la metodología aplicada para la realización de las medidas in situ obteniendo resultados de los parámetros acústicos representativos del recinto para el análisis de sus características acústicas y posterior comparación con la predicción de los mismos mediante la simulación del modelo informático. También se muestra el proceso que se ha seguido para el diseño del modelo acústico a partir de los planos del teatro y medidas realizadas en el recinto, para la simulación de parámetros y características acústicas. Finalmente se exponen las conclusiones extraídas tras el estudio realizado y la propuesta de mejoras en el entorno para cumplimiento de parámetros acústicos óptimos que se puedan exigir a esta sala, incluyendo un presupuesto que muestre la viabilidad económica del proyecto. ABSTRACT. The goal of this final project, is to perform an acoustic study and simulation of the Tomás y Valiente theatre in Fuenlabrada. These premises are mainly used for stage plays, but also as a multipurpose space, therefore its acustic behaviour and suitability for the expected uses will be analyzed. To accomplish this task, experimental measures for all the representative parameters for an acoustic hall, will be taken on site. The prediction for those measurements will be simulated through EASE software, so the acoustic characteristics obtained using both methods will be compared, and improvements will be proposed in order to achieve the best acoustic parameters, the hall can have. First at all, the theoretical concepts definition involves exposing the main concepts to consider in the acoustics field, detailing the basic principles of the psychoacoustic. On top of the criteria used in the design of acoustic enclosures and parameters defining the quality according to the use the enclosure is intended for. Research on the most common usage for the space, and optimal values, comparing it with similar rooms in size and use. Experimental measures are made of the acoustic parameters representative of the enclosure for the analysis of its acoustic characteristics and its later comparison with the prediction of the parameters through informatics model simulation. Also the process which has been followed for the design of acoustic model of the theater are taken from on site measurements, experimental representative measures and acoustic parameters, for the acoustic characteristics analysis and post comparison with the software model simulation and prediction. Acoustic design of the theater taking as a base the building blueprints, and manual measures, for the parameters and acoustic characteristics simulation. Finally, the conclusions extracted after the performed research are shown and the propose of improvements in the environment for fulfillment of acoustic optimal parameters which can be required to this room, including a quote with shows the economical viability of the project.

A bankable method for the field testingor a CPV plant

The bankability of CPV projects is an important issue to pave the way toward a swift and sustained growth in this technology. The bankability of a PV plant is generally addressed through the modeling of its energy yield under a b aseline loss scenario, followed by an on-site measurement campaign aimed at verifying its energetic behavior. The main difference between PV and CPV resides in the proper CPV modules, in particular in the inclusion of optical lements and III-V multijunction cells that are much more sensitive to spectral variations than xSi cells, while the rest of the system behaves in a way that possesses many common points with xSi technology. The modeling of the DC power output of a CPV system thus requires several impo rtant second order parameters to be considered, mainly related to optics, spectral direct solar radiation, wind speed, tracker accuracy and heat dissipation of cells.

Bankable procedures for the technical quality assurance of large scale PV plants

Strict technical quality assurance procedures are essential for PV plant bankability. When large-scale PV plants are concerned, this is typically accomplished in three consecutive phases: an energy yield forecast, that is performed at the beginning of the project and is typically accomplished by means of a simulation exercise performed with dedicated software; a reception test campaign, that is performed at the end of the commissioning and consists of a set of tests for determining the efficiency and the reliability of the PV plant devices; and a performance analysis of the first years of operation, that consists in comparing the real energy production with the one calculated from the recorded operating conditions and taking into account the maintenance records. In the last six years, IES-UPM has offered both indoor and on-site quality control campaigns for more than 60 PV plants, with an accumulated power of more than 300 MW, in close contact with Engineering, Procurement and Construction Contractors and financial entities. This paper presents the lessons learned from such experience.

Design, development and construction of an outdoor testing facility for semi-transparent photovoltaic modules

Building-integrated Photovoltaics (BIPV) is one of the most promising technologies enabling buildings to generate on-site part of their electricity needs while performing architectural functionalities. A clear example of BIPV products consists of semi-transparent photovoltaic modules (STPV), designed to replace the conventional glazing solutions in building façades. Accordingly, the active building envelope is required to perform multiple requirements such as provide solar shading to avoid overheating, supply solar gains and thermal insulation to reduce heat loads and improve daylight utilization. To date, various studies into STPV systems have focused on their energy performance based on existing simulation programs, or on the modelling, normally validated by limited experimental data, of the STPV modules thermal behaviour. Taking into account that very limited experimental research has been conducted on the energy performance of STPV elements and that the characterization in real operation conditions is necessary to promote an energetically efficient integration of this technology in the building envelope, an outdoor testing facility has been designed, developed and built at the Solar Energy Institute of the Technical University of Madrid. In this work, the methodology used in the definition of the testing facility, its capability and limitations are presented and discussed.

Experiences and methodology in a multidisciplinary energy and architecture competition: Solar Decathlon Europe 2012

Solar Decathlon Europe is an international competition among universities which promotes interdisciplinary learning in engineering and architecture. Students from different disciplines participate in teams guided by several professors during a 29 month preparation period plus five weeks of on-site contest. The educational project involves designing, building and testing a solar energy house connected to the electrical grid with the strategy of maximizing self-consumption, supported by bioclimatic technologies and maintaining a low environmental footprint. It culminates in a on-site contest in which teams must assembly the house themselves, test it with ordinary real life tasks and finally disassembly it. The event has also a divulgative aim, trying to make students and visitors get interested in discovering the problems presented by real engineering and architecture applications. In addition, SDE covers R&D aspects in different fields such as energy efficiency, solar energy and bioclimatic architecture. This article presents the methodology followed during the SDE 2012 edition, in which more than 850 students participated. The obtained results show that the educational competition was a success according to the technical and professional ambitions of the students, most of them considering that their knowledge had increased in areas related to technical and multidisciplinary aspects.

Propagación del sonido en las iglesias prerrománicas

El presente proyecto tiene como objetivo el estudio de la propagación del sonido en las iglesias prerrománicas. Para ello, se analizarán y aplicarán algunas de las teorías más relevantes de propagación del sonido, con el fin de concluir si, alguna de ellas, se puede establecer como modelo de propagación en estos espacios. Se partirá de valores medidos in situ en diversas iglesias prerrománicas de la geografía española, siendo este un número considerado suficiente para poder valorar los resultados como significativos. Estas iglesias son: - San Cebrián - San Juan de Baños - San Pedro de la Nave - Santa María de Melque - Santa Lucía del Trampal El proyecto se valdrá de los siguientes parámetros acústicos para llevar a cabo el estudio: la Claridad Musical, C80, y la Sonoridad, G. El trabajo se centrará en tres teorías de propagación del sonido en el interior de recintos: • “La Teoría Clásica” • “Modelo de Barron y Lee” • “Método μ “ A partir de estas teorías, se obtendrán los valores, de forma teórica, para de C80 y G y se llevará a cabo una comparativa con los valores empíricos. ABSTRACT The aim of this project is to study the sound propagation in Pre-Romanesque churches. Hence, some of the most relevant sound propagation theories will be analyzed and applied, in order to conclude whether, any of them, can be set as a propagation model in this typology of spaces. On site measured values will be taken in different Pre-Romanesque churches in the Spanish geography, being the number of churches enough to evaluate if the results are significant. These churches are: - San Cebrián - San Juan de Baños - San Pedro de la Nave - Santa María de Melque - Santa Lucía del Trampal The following acoustic parameters will be used to perform the study: the musical clarity, C80, and the sound strength. G. The research will focus on three sound propagation theories in closed spaces: • “Classic Theory” • “Barron & Lee model” • μ Method Trough these theories, theoretical values will be derived, for C80 and G, being compared to the empirical values obtained on site.

Sistema de gestión de residuos de construcción y demolición en obras de edificación residencial. Buenas prácticas en la ejecución de obra

En el sector de la edificación, las grandes constructoras comienzan a considerar aspectos medioambientales, no limitándose a lo establecido por la legislación vigente, y buscando la implementación de buenas prácticas. Si bien este hecho es una realidad para las grandes empresas constructoras, todavía falta que la gran mayoría de las empresas del sector (pequeñas y medianas) adopten ésta tendencia. En este sentido, las publicaciones y estadísticas consultadas revelan que el sector de la construcción sigue siendo el sector con menor número de Sistemas de Gestión Ambiental (SGA) certificados en comparación con otros sectores industriales, debido principalmente a las peculiaridades de su actividad. Por otra parte, el sector de la construcción genera grandes cantidades de residuos de construcción y demolición (RCD). Aunque, en los últimos años la actividad de la construcción ha disminuido, debido a la crisis económica del país, no hay que olvidar todos los problemas causados por este tipo de residuos, o mejor dicho, por su gestión. La gestión de los RCD actual está lejos de alcanzar la meta propuesta en la Directiva Marco de Residuos (DMR), la cual exige un objetivo global para el año 2020 en el que el 70% de todos los RCD generados deberán ser reciclados en los países de la UE. Pero, la realidad es que sólo el 50% de la RCD generados en la Unión Europea se recicla. Por este motivo, en los últimos años se ha producido una completa modificación del régimen jurídico aplicable a los RCD, incorporando importantes novedades a nuestro ordenamiento interno como son: la redacción de un Estudio de gestión de RCD (en fase de diseño) y un Plan de gestión de RCD (en fase de ejecución). Entre estas medidas destaca el poder conocer, con la antelación suficiente, la cantidad y el momento en que los RCD son generados, para así poder planificar la gestión más adecuada para cada categoría de RCD. Es por ello que el desarrollo de cualquier instrumento que determine la estimación de RCD así como iniciativas para su control debe ser considerado como una herramienta para dar respuestas reales en el campo de la sostenibilidad en la edificación. Por todo lo anterior, el principal objetivo de la Tesis Doctoral es mejorar la gestión actual de los RCD, a través de la elaboración e implementación en obra de un Sistema de gestión de RCD en fase de ejecución que podrá ser incluido en el Sistema de Gestión Ambiental de las empresas constructoras. Para ello, se ha identificado la actividad que más residuo genera, así como las diferentes categorías de RCD generadas durante su ejecución, a través del análisis de nueve obras de edificación de nueva planta. Posteriormente, se han determinado y evaluado, en función de su eficacia y viabilidad, veinte buenas prácticas encaminadas a reducir la generación de RCD. También, se han identificado y evaluado, en función de su coste económico, cinco alternativas de gestión para cada categoría de RCD generada. Por último, se ha desarrollado e implementado un Sistema de Gestión de RCD en una empresa de construcción real. En definitiva, el Sistema de Gestión de RCD propuesto contiene una herramienta de estimación de RCD y también proporciona una relación de buenas prácticas, según su viabilidad y eficacia, sobre los aspectos más significativos en cuanto a la gestión de RCD se refiere. El uso de este Sistema de gestión de RCD ayudará a los técnicos de la construcción en el desarrollo de los documentos "Estudio de gestión de RCD " y "Plan de gestión de RCD " - requeridos por ley -. Además, el Sistema promueve la gestión ambiental de la empresa, favoreciendo la cohesión del proceso constructivo, estableciendo responsabilidades en el ámbito de RCD y proporcionando un mayor control sobre el proceso. En conclusión, la implementación de un sistema de gestión de RCD en obra ayuda a conseguir una actividad de edificación, cuyo principal objetivo sea la generación de residuos cero. ABSTRACT Currently, in the building sector, the main construction companies are considering environmental issues, not being limited to the current legislation, and seeking the implementation of good practices. While this fact is a reality for large construction companies, still the vast majority of construction companies (small and medium enterprises) need to accept this trend. In this sense, official publications and statistics reveal that the construction sector remains with the lowest number of certified Environmental Management Systems (EMS) compared to other industrial sectors, mainly due to the peculiarities of its activity. Moreover, the construction industry in Spain generates large volumes of construction and demolition waste (CDW) achieving a low recycling rate compared to other European Union countries and to the target set for 2020. Despite the complete change in the legal regime for CDW in Spain, there are still several difficulties for their application at the construction works. Among these difficulties the following can be highlighted: onsite segregation, estimating CDW generation and managing different CDW categories. Despite these difficulties, the proper CDW management must be one of the main aspects considered by construction companies in the EMS. However, at present the EMS used in construction companies consider very superficially CDW management issues. Therefore, current EMS should go a step further and include not only procedures for managing CDW globally, but also specific procedures for each CDW category, taking into account best practices for prevention, minimization and proper CDW management in order to achieve building construction works with zero waste generation. The few scientific studies analysing EMS implementation in construction enterprises focus on studying the benefits and barriers of their implementation. Despite the drawbacks found, implementing an EMS would bring benefits such as improving the corporate image in relation to the environment, ensuring compliance with the law or reducing environmental risks. Also, the international scientific community has shown great interest in defining models to estimate in advance the CDW that will be generated during the building construction or rehabilitation works. These studies analyse the overall waste generation and its different CDW categories. However, despite the many studies found on CDW quantification, analysing its evolution throughout the construction activities is a factor that must be further studied and discussed in greater depth, as results would be of great significance when planning the CDW management. According to the scientific studies analysing the implementation of good environmental practices in construction sites, it seems that, in general, the CDW collection system is done in a decentralized manner by each subcontracted company. In addition, the corporate image generated when poor practices are done may adversely affect the company's reputation and can result in loss of contracts. Finally, although there are numerous guides and manuals of good practices for CDW management, no references have been found implementing these measures in the Environmental Management System of the construction companies. From all the above, this thesis aims to provide answers to reduce the environmental impact caused by CDW generation in building construction works, in order to get a building process with zero waste generation. In this sense, is essential to generate new knowledge in order to implement a system which can carry out comprehensive management of CDW generated onsite, at the design stage until the end of its life cycle, taking into account both technical and economic criteria. Therefore, the main objective of this thesis is to define and implement a CDW management system for residential building construction works, helping construction agents not only to manage the CDW in accordance with current legislation, but also minimizing their generation on site by applying best practices, resulting in achieving the goal of zero waste in building works.

Evaluación de los co-beneficios sobre el desarrollo sostenible y la reducción de la pobreza de proyectos de mitigación del cambio climático en Brasil

El cambio climático y los diferentes aspectos del concepto de “desarrollo” están intrínsecamente interconectados. Por un lado, el desarrollo económico de nuestras sociedades ha contribuido a un aumento insostenible de las emisiones de gases de efecto invernadero, las cuales están desestabilizando el sistema climático global, generando al mismo tiempo una distribución desigual de la capacidad de las personas para hacer frente a estos cambios. Por otro lado, en la actualidad existe un amplio consenso sobre que el cambio climático impacta directamente y de manera negativa sobre el denominando desarrollo sostenible. De igual manera, cada vez existe un mayor consenso de que el cambio climático va a desafiar sustancialmente nuestra capacidad de erradicar la pobreza a medio y largo plazo. Ante esta realidad, no cabe duda de que las estrategias de adaptación son esenciales para mantener el desarrollo. Es por esto que hasta el momento, los mayores esfuerzos realizados por unir las agendas globales de la lucha contra la pobreza y del cambio climático se han dado en el entorno de la adaptación al cambio climático. Sin embargo, cada vez son más los actores que defienden, desde distintos escenarios, que existen sinergias entre la mitigación de emisiones y la mejora de las condiciones de vida de las poblaciones más vulnerables, favoreciendo así un “desarrollo sostenible” sin disminuir los recursos financieros destinados a la adaptación. Para hacer efectivo este potencial, es imprescindible identificar diseños de estrategias de mitigación que incrementen los resultados de desarrollo, contribuyendo al desarrollo sostenible al mismo tiempo que a reducir la pobreza. En este contexto se sitúa el objetivo principal de esta investigación, consistente en analizar los co-beneficios locales, para el desarrollo sostenible y la reducción la pobreza, de proyectos de mitigación del cambio climático que se implementan en Brasil. Por co-beneficios se entienden, en el lenguaje de las discusiones internacionales de cambio climático, aquellos beneficios que van más allá de la reducción de emisiones de Gases de Efecto Invernadero (GEI) intrínsecas por definición a los proyectos de mitigación. Los proyectos de mitigación más relevantes hasta el momento bajo el paraguas de la Convención Marco de las Naciones Unidas para el Cambio Climático (CMNUCC), son los denominados Mecanismos de Desarrollo Limpio (MDL) del Protocolo de Kioto. Sin embargo, existen alternativas de proyectos de mitigación (tales como los denominados “estándares adicionales” a los MDL de los Mercados Voluntarios de Carbono y las Tecnologías Sociales), que también serán tenidos en cuenta en el marco de este estudio. La elección del tema se justifica por la relevancia del mismo en un momento histórico en el que se está decidiendo el futuro del régimen climático a partir del año 2020. Aunque en el momento de redactar este documento, todavía no se ha acordado la forma que tendrán los futuros instrumentos de mitigación, sí que se sabe que los co-beneficios de estos instrumentos serán tan importantes, o incluso más, que las reducciones de GEI que generan. Esto se debe, principalmente, a las presiones realizadas en las negociaciones climáticas por parte de los países menos desarrollados, para los cuales el mayor incentivo de formar parte de dichas negociaciones se basa principalmente en estos potenciales co-beneficios. Los resultados de la tesis se estructuran alrededor de tres preguntas de investigación: ¿cómo están contribuyendo los MDL implementados en Brasil a generar co-beneficios que fomenten el desarrollo sostenible y reduzcan la pobreza?; ¿existen proyectos de mitigación en Brasil que por tener compromisos más exigentes en cuanto a su contribución al desarrollo sostenible y/o la reducción de la pobreza que los MDL estén siendo más eficientes que estos en relación a los co-beneficios que generan?; y ¿qué características de los proyectos de mitigación pueden resultar críticas para potenciar sus co-beneficios en las comunidades en las que se implementan? Para dar respuesta a estas preguntas, se ha desarrollado durante cuatro años una labor de investigación estructurada en varias fases y en la que se combinan diversas metodologías, que abarcan desde el desarrollo de un modelo de análisis de cobeneficios, hasta la aplicación del mismo tanto a nivel documental sobre 194 documentos de diseño de proyecto (denominado análisis ex-ante), como a través de 20 casos de estudio (denominado análisis ex-post). Con la realización de esta investigación, se ha confirmado que los requisitos existentes hasta el momento para registrar un proyecto como MDL bajo la CMNUCC no favorecen sustancialmente la generación de co-beneficios locales para las comunidades en las que se implementan. Adicionalmente, se han identificado prácticas y factores, que vinculadas a las actividades intrínsecas de los proyectos de mitigación, son efectivas para incrementar sus co-beneficios. Estas prácticas y factores podrán ser tenidas en cuenta tanto para mejorar los requisitos de los actuales proyectos MDL, como para apoyar la definición de los nuevos instrumentos climáticos. ABSTRACT Climate change and development are inextricably linked. On the one hand, the economic development of our societies has contributed to the unsustainable increase of Green House Gases emissions, which are destabilizing the global climate system while fostering an unequal distribution of people´s ability to cope with these changes. On the other hand, there is now a consensus that climate change directly impacts the so-called sustainable development. Likely, there is a growing agreement that climate change will substantially threaten our capacity to eradicate poverty in the medium and long term. Given this reality, there is no doubt that adaptation strategies are essentials to keep development. This is why, to date, much of the focus on poverty in the context of climate change has been on adaptation However, without diverting resources from adaptation, there may exist the potential to synergize efforts to mitigate emissions, contribute to sustainable development and reduce poverty. To fulfil this potential, it is key identifying how mitigation strategies can also support sustainable development and reduce poverty. In this context, the main purpose of this investigation is to explore the co-benefits, for sustainable development and for poverty reduction, of climate change mitigation projects being implemented in Brazil. In recent years the term co-benefits, has been used by policy makers and academics to refer the potentially large and diverse range of collateral benefits that can be associated with climate change mitigation policies in addition to the direct avoided climate impact benefits. The most relevant mitigation projects developed during the last years under the United Nations Framework Convention on Climate Change (UNFCCC) are the so-called Clean Development Mechanisms (CDM) of the Kyoto Protocol. Thus, this research will analyse this official mechanism. However, there are alternatives to the mitigation projects (such as the "add-on standards" of the Voluntary Carbon Markets, and the Social Technologies) that will also be assessed as part of the research. The selection of this research theme is justified because its relevance in a historic moment in which proposals for a future climate regime after 2020 are being negotiated. Although at the moment of writing this document, there is not a common understanding on the shape of the new mitigation instruments, there is a great agreement about the importance of the co-benefits of such instruments, which may be even more important for the Least Developed Countries that their expected greenhouse gases emissions reductions. The results of the thesis are structured around three research questions: how are the CDM projects being implemented in Brazil generating local co-benefits that foster sustainable development and poverty reduction?; are other mitigation projects in Brazil that due to their more stringent sustainable development and/o poverty reduction criteria, any more successful at delivering co-benefits than regular CDM projects?; and what are the distinguishing characteristics of mitigation projects that are successful at delivering co-benefits? To answer these research questions, during four years it has been developed a research work structured in several phases and combining various methodologies. Those methodologies cover from the development of a co-benefits assessment model, to the application of such model both to a desktop analysis of 194 project design documents, and to 20 case studies using field data based on site visits to the project sites. With the completion of this research, it has been confirmed that current requirements to register a CDM project under the UNFCCC not substantially favour co-benefits at the local level. In addition, some practices and factors enablers of co-benefits have been identified. These characteristics may be taken into consideration to improve the current CDM and to support the definition of the new international market mechanisms for climate mitigation.

Le Corbusier y el proyecto para Saint Marie de la Tourette: De la celda al espacio inefable

El convento de la Tourette se concibe en un marco temporal concreto. Sin embargo sería erróneo limitarse a él a la hora de intentar desentrañar las claves del proyecto y llegar a un entendimiento completo del mismo. Es necesario analizarlo atendiendo al conjunto global de la producción del arquitecto, la cual ha ido forjando una forma propia de hacer que condicionará en gran medida las decisiones tomadas en cada momento. Esta tesis realiza una investigación de doble sentido (recogida en los dos volúmenes que la componen). Por un lado analiza el proceso evolutivo en el que se enhebra la obra intentando desentrañar la influencia de aquel en ésta, pero por otro, invirtiendo el sentido, también desvela ciertas claves de la arquitectura de Le Corbusier a través del preciso análisis de proyecto de la Tourette. Pero aún más, la pertenencia del convento de la Tourette al “tipo monacal” introduce la presencia de un tiempo histórico “ab origine, in hillo tempore” del que la investigación se hace eco. Un tiempo al que Le Corbusier siempre volverá la mirada, y que en este caso se encuentra muy presente, determinando el devenir del proyecto de una forma particular y definitiva. Por tanto este trabajo pretende convocar los dos tiempos que conviven en el proyecto del convento de la Tourette, el corto, concreto y cerrado de su génesis y desarrollo, que se circunscribe al periodo de proyecto comprendido entre los años 1953 y 1956, y el más dilatado, abstracto y abierto, que enlaza el proyecto con la producción de Le Corbusier, y aún más atrás, con el tiempo histórico. En la primera parte del trabajo (A. “PROYECTO”) se realiza un análisis cronológico de la documentación gráfica ‐incluyendo su re‐dibujo‐ y escrita del proyecto, desde los croquis que el arquitecto esboza en su primera visita al valle del Turdine hasta el documento final del project d’exécution, a partir del cual se materializará la obra. El objetivo de la investigación no es describir la realidad construida, sino participar del secreto de su génesis analizando y intentando comprender los dibujos o el pensamiento de sus creadores. Frente a la multitud de escritos sobre la obra del convento de la Tourette el foco de atención de la tesis se centra en el proyecto. Es en esta fase de elaboración y desarrollo de las ideas, previa a la acción de construir, donde pensamos que La deriva de la propia actividad del arquitecto avala esta decisión. A lo largo de su carrera Le Corbusier va reduciendo progresivamente su presencia en la obra centrándose cada vez más en las fases de la concepción y proyecto arquitectónico. Considera que en ellas se produce lo “esencial” mientras que deja las decisiones de obra en manos de sus colaboradores y de los diversos “operadores”, participando tan solo en el visto bueno final de las mismas (esta posición contrasta con la entrega de los constructores para quienes el arquitecto encarna la innovación tecnológica). En la Tourette realiza exclusivamente tres visitas de obra en las que actúa como un mero escenógrafo, ajustando aquí y allá pequeñas decisiones de la construcción. Esta distancia refuerza su posición en el proceso y subraya su búsqueda de un ideal teórico desarrollado sobre todo en la fase de proyecto frente a lo subsidiario de la realidad práctica. En la segunda parte de la tesis, denominada “RE‐VISIONES”, se abre el campo de acción a otras facetas de la ingente actividad de Le Corbusier como la pintura, la escritura o incluso la escultura; una nueva MIRADA bajo el prisma de una serie de conceptos‐llave recurrentes en su Petit vocabulaire (l’homme, la céllule, la bôite, l’organisme). Se amplía, por tanto, el marco temporal, repasando de modo genérico y transversal la evolución de los mismos en la trayectoria del arquitecto, comprobándose como el convento de la Tourette es un eslabón característico y clave en todos ellos. ABSTRACT The Convent of La Tourette is conceived in a specific time frame. However, it would be erroneous to limit oneself simply to this when trying to unravel the keys to the project and to fully understand it. It is necessary to analyse the project attending to the entire production of the architect, who progressively shaped his own way of doing things which would condition to a large extent the decisions taken at each point in time. This thesis carries out its research in a dual sense (brought together in both its volumes). On the one hand, it analyses the development process threading the work attempting to fathom the influence of the former on the latter but, on the other hand, inverting the sense which also reveals certain keys to the architecture of Le Corbusier by means of a detailed analysis of the project for La Tourette. Even more so, the Convent of La Tourette belonging to the “monastic type” introduces the presence of a historical period “ab origine, in hillo tempore" reflected in the research. A period to which Le Corbusier would always look back on and which is extremely present in this case, determining the evolution of the project in a particular and definitive manner. Therefore, this piece of work attempts to bring together both time periods co‐existing in the project for the Convent of La Tourette, the short, specific and closed one regarding its genesis development, encompassing the project period going from 1953 to 1956, and the broader, more abstract and open one linking the project with the production by Le Corbusier, and even further back, with the historical period. The first part of this work (A. “PROJECT") performs a chronological analysis of the graphic – including its re‐drawing –and written documentation of the project, from the outlines the architect sketched in his first visit to the Turdine valley up to the final document of the project d’exécution from which the works would materialise. The main object of the investigation is not intend to describe the reality constructed, but to participate in the secret of its genesis, analysing and trying to understand the drawings or the thoughts of its creators. As opposed to the many writings on the work of the Convent of La Tourette, the attention of this thesis focusses on the project. It is in this preparation and development stage, previous to the construction action, where it is believed the real keys to understand and explain it lie. The enormous work collecting, ordering and analysing the abundant graphic and written information reveals “a multidirectional process, full of regrets and securities, errors and certainties, leaps backwards and tremendous foresight in the process” directed not only by the conditions of the assignment, but also by the way of doing things of Le Corbusier and his collaborator I. Xenakis. A web of hidden relationships is weaved in this open space of the process, often distant in time, allowing us to draw a new route, not only towards the constructed works of the Convent of La Tourette, but towards understanding his entire production. It is in the creation of this new path of knowledge, and not only in its conclusion, where the “thesis” acquires its true meaning. In second place, the drift in the actual activity of the architect backs this decision. Throughout his career, Le Corbusier progressively reduced his presence on site, focussing more and more on the conception and architectural project stages. He considered that which was “essential” took place in these, while leaving the on‐site decisions to his collaborators and the different “operators”, only participating in their final approval (this position is in contrast with the delivery by the constructors for whom the architect embodies the technological innovation). In La Tourette he exclusively made three on‐site visits, in which acted as a pure stage designer, adjusting small construction decisions here and there. This distance reinforces his position in the process and underlines his search for a theoretical ideal developed primarily in the project stage as opposed to that which is secondary of the practical reality. The second part of the thesis, called “RE‐VISIONS”, widens the scope of action to other aspects of the huge activity by Le Corbusier, encompassing painting, writing or even sculpture; a new VIEW under the prism of a series of recurrent key concepts in his Petit vocabulaire (l’homme, la céllule, la bôite, l’organisme). The time frame is therefore extended, revising in a generic and transversal manner the development of these concepts throughout the career of Le Corbusier, confirming how the Convent of La Tourette is a characteristic and key link to each of them.

Probabilistic assessment of risk from the exposure to mercury in artisanal gold mining communities in Colombia

Colombia is one the largest per capita mercury polluters as a consequence of its artisanal gold mining operations, which are steadily increasing following the rising price of this metal. Compared to gravimetric separation methods and cyanidation, the concentration of gold using Hg amalgams presents several advantages: the process is less time-consuming and minimizes gold losses, and Hg is easily transported and inexpensive relative to the selling price of gold. Very often, mercury amalgamation is carried out on site by unprotected workers. During this operation large amounts of mercury are discharged to the environment and eventually reach the fresh water bodies in the vicinity where it is subjected to methylation. Additionally, as gold is released from the amalgam by heating on open charcoal furnaces in small workshops, mercury vapors are emitted and inhaled by the artisanal smelters and the general population

Technical evolution of 3d modular construction from the nineteenth century to world war II

3D Modular construction is poorly known and scarcely published in technical literature. In spite of that there are an increasing number of manufacturers offering their products in different countries. This method has largely evolved from early examples such as the American Gold Rush prefabrication in the nineteenth century, the Sears precut homes or Voisin´s prototypes for modular homes, to the end of the first half of the twentieth century. In this period a non negligible number of attempts in 3D modular construction have been carried out, ranging from theoretical proposals to several hundred or thousand units produced. Selected examples of modular architecture will be analyses in order to illustrate its technical evolution, concerning materials, structure, transportation and on site assembly. Success and failure factors of the different systems will be discussed. Conclusions about building criteria shown in them and their applicability in current architecture will be drawn.