Online document repository for GEM Website (2016)

Resources created at University of Southampton for the module GIS for Environmental Management (GEM)

New mechanical samples positioning system for irradiations on a radial channel at nuclear research reactor in a full-power continuous operation

FAPESP:97/5550

Automated Collection of Sign Inventory Information by Integrating Global Positioning System (GPS) with Videologging Data Collection Activities, 1995

Advances in communication, navigation and imaging technologies are expected to fundamentally change methods currently used to collect data. Electronic data interchange strategies will also minimize data handling and automatically update files at the point of capture. This report summarizes the outcome of using a multi-camera platform as a method to collect roadway inventory data. It defines basic system requirements as expressed by users, who applied these techniques and examines how the application of the technology met those needs. A sign inventory case study was used to determine the advantages of creating and maintaining the database and provides the capability to monitor performance criteria for a Safety Management System. The project identified at least 75 percent of the data elements needed for a sign inventory can be gathered by viewing a high resolution image.

Positioning Australia’s contemporary health and physical education curriculum to address poor physical activity participation rates by adolescent girls

Knowledge Exchange Institutional Repository Workshop

The workshop took place on 16-17 January in Utrecht, with Seventy experts from eight European countries in attendance. The workshop was structured in six sessions: usage statistics research paper metadata exchanging information author identification Open Archives Initiative eTheses Following the workshop, the discussion groups were asked to continue their collaboration and to produce a report for circulation to all participants. The results can be downloaded below. The recommendations contained in the reports above have been reviewed by the Knowledge Exchange partner organisations and formed the basis for new proposals and the next steps in Knowledge Exchange work with institutional repositories. Institutional Repository Workshop - Next steps During April and May 2007 Knowledge Exchange had expert reviewers from the partner organisations go though the workshop strand reports and make their recommendations about the best way to move forward, to set priorities, and find possibilities for furthering the institutional repository cause. The KE partner representatives reviewed the reviews and consulted with their partner organisation management to get an indication of support and funding for the latest ideas and proposals, as follows: Pragmatic interoperability During a review meeting at JISC offices in London on 31 May, the expert reviewers and the KE partner representatives agreed that ‘pragmatic interoperability' is the primary area of interest. It was also agreed that the most relevant and beneficial choice for a Knowledge Exchange approach would be to aim for CRIS-OAR interoperability as a step towards integrated services. Within this context, interlinked joint projects could be undertaken by the partner organisations regarding the areas that most interested them. Interlinked projects The proposed Knowledge Exchange activities involve interlinked joint projects on metadata, persistent author identifiers, and eTheses which are intended to connect to and build on projects such as ISPI, Jisc NAMES and the Digital Author Identifier (DAI) developed by SURF. It is important to stress that the projects are not intended to overlap, but rather to supplement the DRIVER 2 (EU project) approaches. Focus on CRIS and OAR It is believed that the focus on practical interoperability between Current Research Information Systems and Open Access Repository systems will be of genuine benefit to research scientists, research administrators and librarian communities in the Knowledge Exchange countries; accommodating the specific needs of each group. Timing June 2007: Write the draft proposal by KE Working Group members July 2007: Final proposal to be sent to partner organisations by KE Group August 2007: Decision by Knowledge Exchange partner organisations.

Permanent Public Access for Citizens - Finnish Government Publications on a Repository Platform

Poster presented at Open Repositories 2016 in Dublin, Ireland, June 14, 2016

A comparison of the physiological demands of rugby union match-play when determined by absolute (ABS) or individual (IND) velocity bands in Global Positioning System (GPS) analysis

Since turning professional in 1995 there have been considerable advances in the research on the demands of rugby union, largely using Global Positioning System (GPS) analysis over the last 10 years. A systematic review on the use of GPS, particularly the setting of absolute (ABS) and individual (IND) velocity bands in field based, intermittent, high-intensity (HI) team sports was undertaken. From 3669 records identified, 38 studies were included for qualitative analysis. Little agreement on the definition of movement intensities within team sports was found, only three papers, all on rugby union, had used IND bands, with only one comparing ABS and IND methods. Thus, the aim of this study was to determine if there is a difference in the demands within positions when comparing ABS and IND methods for GPS analysis and if these differences are significantly different between the forward and back positional groups. A total of 214 data files were recorded from 26 players in 17 matches of the 2015/2016 Scottish BT Premiership. ABS velocity zones 1-7 were set at 1) 0-6, 2) 6.1-11, 3) 11.1-15, 4) 15.1-18, 5) 18.1-21, 6) 21.1-15 and 7) 25.1-40km.h-1 while IND zones 1-7 were 1) <20, 2) 20-40, 3) 40-50, 4) 50-70, 5) 70-80, 6) 80-95 and 7) 95-100% of player’s individually determined maximum velocity (Vmax). A 40m sprint test measured Vmax using OptaPro S4 10 Hz (catapult, Australia) GPS units to derive IND bands. The same GPS units were worn during matches. GPS outputs analysed were % distance, % time, high intensity efforts (HIEs) over 18.1 km.h-1 / 70% max velocity and repeated high intensity efforts (RHIEs) which consists of three HIEs in 21secs. General linear model (GLM) analysis identified a significant difference in the measurement of % total distance covered, between the ABS and IND methods in all zones for forwards (p<0.05) and backs (p<0.05). This difference was also significant between forwards and backs in zones 1, shown as mean difference ± standard deviation (3.7±0.7%), 6 (1.2±0.4%) and 7 (1.0±0.0%) respectively (p<0.05). Percentage time estimations were significantly different between ABS and IND analysis within forwards in zones 1 (1.7±1.7%), 2 (-2.9±1.3%), 3 (1.9±0.8%), 4 (-1.4±0.8%) and 5 (0.2±0.4%), and within backs in zones 1 (-10±1.5%), 2 (-1.2±1.1%), 3 (1.8±0.9%) and 5 (0.6±0.5%) (p<0.05). The difference between groups was significant in zones 1, 2, 4 and 5 (p<0.05). The number of HIEs was significantly different between forwards and backs in zones 6 (6±2) and 7 (3±2). RHIEs were significantly different between ABS and IND for forwards (1±2, p<0.05) although not between groups. Until more research on the differences in ABS and IND methods is carried out, then neither can be deemed a criterion method. In conclusion, there are significant differences between the ABS and IND methods of GPS analysis of the physical demands of rugby union, which must be considered when used to inform training load and recovery to improve performance and reduce injuries.

O! She doth teach the torches to burn bright: How JULIET can help authors and repository advocates.

JULIET is a service provided by SHERPA. Its mission is to provide a brief summary of each funding agency’s policy on self-archiving of the published research they have funded. Each entry covers the requirements and details: -Whether archiving is mandatory or encouraged, -What should be deposited -Within what time frame this deposit should take place -Where articles should be deposited -Any conditions attached to this deposit. JULIET interacts with other services such as RoMEO, which listed publisher policies on self-archiving. JULIET is being developed to include funding agency’s policies on open access to data.

Development of a brand and implementation of a promotional campaign for the products of Ria de Aveiro focus on brand identity and brand positioning

Directed internship

Effectively positioning water loss event in smart water networks

With the eye-catching advances in sensing technologies, smart water networks have been attracting immense research interest in recent years. One of the most overarching tasks in smart water network management is the reduction of water loss (such as leaks and bursts in a pipe network). In this paper, we propose an efficient scheme to position water loss event based on water network topology. The state-of-the-art approach to this problem, however, utilizes the limited topology information of the water network, that is, only one single shortest path between two sensor locations. Consequently, the accuracy of positioning water loss events is still less desirable. To resolve this problem, our scheme consists of two key ingredients: First, we design a novel graph topology-based measure, which can recursively quantify the "average distances" for all pairs of senor locations simultaneously in a water network. This measure will substantially improve the accuracy of our positioning strategy, by capturing the entire water network topology information between every two sensor locations, yet without any sacrifice of computational efficiency. Then, we devise an efficient search algorithm that combines the "average distances" with the difference in the arrival times of the pressure variations detected at sensor locations. The viable experimental evaluations on real-world test bed (WaterWiSe@SG) demonstrate that our proposed positioning scheme can identify water loss event more accurately than the best-known competitor.

Indoor positioning system for mobile devices using radio frequency and perfect sequences

Recent advancements in the area of nanotechnology have brought us into a new age of pervasive computing devices. These computing devices grow ever smaller and are being used in ways which were unimaginable before. Recent interest in developing a precise indoor positioning system, as opposed to existing outdoor systems, has given way to much research heading into the area. The use of these small computing devices offers many conveniences for usage in indoor positioning systems. This thesis will deal with using small computing devices Raspberry Pi’s to enable and improve position estimation of mobile devices within closed spaces. The newly patented Orthogonal Perfect DFT Golay coding sequences will be used inside this scenario, and their positioning properties will be tested. After that, testing and comparisons with other coding sequences will be done.