Microwave-assisted and solvent-free peroxidative oxidation of 1-phenylethanol to acetophenone with a CuII-TEMPO catalytic system

The water-soluble copper(II) complex [Cu(H2R)(HL)]center dot H2O (1) was prepared by reaction of copper(II) nitrate hydrate with (E)-2-(((1-hydroxynaphthalen-2-yl)methylene)amino) benzenesulfonic acid (H2L) and diethanolamine (H3R). It was characterized by IR and ESI-MS spectroscopies, elemental and X-ray crystal structural analyses. 1 shows a high catalytic activity for the solvent-free microwave (MW) assisted oxidation of 1-phenylethanol with tert-butylhydroperoxide, leading, in the presence of TEMPO, to yields up to 85% (TON = 850) in a remarkably short reaction time (15 min, with the corresponding TOE value of 3.40 x 10(3) h(-1)) under low power (25W) MW irradiation. Crown Copyright (C) 2014 Published by Elsevier B.V. All rights reserved.

InOx thin films deposited by plasma assisted evaporation: application in light shutters

An integration of undoped InOx and commercial ITO thin films into laboratory assembled light shutter devices is made. Accordingly, undoped transparent conductive InOx thin films, about 100 nm thick, are deposited by radiofrequency plasma enhanced reactive thermal evaporation (rf-PERTE) of indium teardrops with no intentional heating of the glass substrates. The process of deposition occurs at very low deposition rates (0.1-0.3 nm/s) to establish an optimized reaction between the oxygen plasma and the metal vapor. These films show the following main characteristics: transparency of 87% (wavelength, lambda = 632.8 nm) and sheet resistance of 52 Omega/sq; while on commercial ITO films the transparency was of 92% and sheet resistance of 83 Omega/sq. The InOx thin film surface characterized by AFM shows a uniform grain texture with a root mean square surface roughness of Rq similar to 2.276 nm. In contrast, commercial ITO topography is characterized by two regions: one smoother with Rq similar to 0.973 nm and one with big grains (Rq similar to 3.617 nm). For the shutters assembled using commercial ITO, the light transmission coefficient (Tr) reaches the highest value (Tr-max) of 89% and the lowest (Tr-min) of 1.3% [13], while for the InOx shutters these values are 80.1% and 3.2%, respectively. Regarding the electric field required to achieve 90% of the maximum transmission in the ON state (E-on), the one presented by the devices assembled with commercial ITO coated glasses is 2.41 V/mu m while the one presented by the devices assembled with InOx coated glasses is smaller, 1.77 V/mu m. These results corroborate the device quality that depends on the base materials and fabrication process used. (C) 2014 Elsevier Ltd. All rights reserved.

Internal structure of the nanogratings generated inside bulk fused sílica by ultrafast laser direct writing

The aim of the present work was to characterize the internal structure of nanogratings generated inside bulk fused silica by ultrafast laser processing and to study the influence of diluted hydrofluoric acid etching on their structure. The nanogratings were inscribed at a depth of 100 mu m within fused silica wafers by a direct writing method, using 1030 nm radiation wavelength and the following processing parameters: E = 5 mu J, tau = 560 fs, f = 10 kHz, and v = 100 mu m/s. The results achieved show that the laser-affected regions are elongated ellipsoids with a typical major diameter of about 30 mu m and a minor diameter of about 6 mu m. The nanogratings within these regions are composed of alternating nanoplanes of damaged and undamaged material, with an average periodicity of 351 +/- 21 nm. The damaged nanoplanes contain nanopores randomly dispersed in a material containing a large density of defects. These nanopores present a roughly bimodal size distribution with average dimensions for each class of pores 65 +/- 20 x 16 +/- 8 x 69 +/- 16 nm(3) and 367 +/- 239 x 16 +/- 8 x 360 +/- 194 nm(3), respectively. The number and size of the nanopores increases drastically when an hydrofluoric acid treatment is performed, leading to the coalescence of these voids into large planar discontinuities parallel to the nanoplanes. The preferential etching of the damaged material by the hydrofluoric acid solution, which is responsible for the pores growth and coalescence, confirms its high defect density. (C) 2014 AIP Publishing LLC.

Surface morphology and phase transformations of femtosecond laser-processed saphire

The morphological and structural modifications induced in sapphire by surface treatment with femtosecond laser radiation were studied. Single-crystal sapphire wafers cut parallel to the (0 1 2) planes were treated with 560 fs, 1030 nm wavelength laser radiation using wide ranges of pulse energy and repetition rate. Self-ordered periodic structures with an average spatial periodicity of similar to 300 nm were observed for fluences slightly higher than the ablation threshold. For higher fluences the interaction was more disruptive and extensive fracture, exfoliation, and ejection of ablation debris occurred. Four types of particles were found in the ablation debris: (a) spherical nanoparticles about 50 nm in diameter; (b) composite particles between 150 and 400 nm in size; (c) rounded resolidified particles about 100-500 nm in size; and (d) angular particles presenting a lamellar structure and deformation twins. The study of those particles by selected area electron diffraction showed that the spherical nanoparticles and the composite particles are amorphous, while the resolidified droplets and the angular particles, present a crystalline a-alumina structure, the same of the original material. Taking into consideration the existing ablation theories, it is proposed that the spherical nanoparticles are directly emitted from the surface in the ablation plume, while resolidified droplets are emitted as a result of the ablation process, in the liquid phase, in the low intensity regime, and by exfoliation, in the high intensity regime. Nanoparticle clusters are formed by nanoparticle coalescence in the cooling ablation plume. (C) 2013 Elsevier B.V. All rights reserved.

Ordenamento da massa florestal da zona de intervenção florestal de Santo Antão (Caminha)

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

Evidences for direct magnetic patterning via diffusive transformations using femtosecond laser interferometry

The application of femtosecond laser interferometry to direct patterning of thin-film magnetic alloys is demonstrated. The formation of stripe gratings with submicron periodicities is achieved in Fe1-xVx (x=18-34wt. %) layers, with a difference in magnetic moments up to Delta mu/mu similar to 20 between adjacent stripes but without any significant development of the topographical relief (<1% of the film thickness). The produced gratings exhibit a robust effect of their anisotropy shape on magnetization curves in the film plane. The obtained data witness ultrafast diffusive transformations associated with the process of spinodal decomposition and demonstrate an opportunity for producing magnetic nanostructures with engineered properties upon this basis.

Laser surfasse patterning using a Michelson interferometer and a femtosecond laser radiation

We report on a simple method to obtain surface gratings using a Michelson interferometer and femtosecond laser radiation. In the optical setup used, two parallel laser beams are generated using a beam splitter and then focused using the same focusing lens. An interference pattern is created in the focal plane of the focusing lens, which can be used to pattern the surface of materials. The main advantage of this method is that the optical paths difference of the interfering beams is independent of the distance between the beams. As a result, the fringes period can be varied without a need for major realignment of the optical system and the time coincidence between the interfering beams can be easily monitored. The potential of the method was demonstrated by patterning surface gratings with different periods on titanium surfaces in air.

Morbidade da esquistossomose e sua relação com a contagem de ovos de Schistosoma mansoni em uma zona hiperendêmica do Estado de Minas Gerais

Um estudo seccional da esquistossomose foi desenvolvido em Comercinho, cidade de 1474 habitantes situada em Minas Gerais. Foram feitos exame de fezes pelo método de KATO-KATZ e exame clínico em, respectivamente, 90 e 80% da população da cidade. Foram estudados os sinais e sintomas apresentados pelos pacientes com diferentes contagens de ovos de S. mansoni, verificando-se que as alterações do tamanho e da consistência do fígado estavam relacionadas à maior eliminação de ovos (> 1000/gr fezes) nos pacientes com 2-14 anos de idade, mas não nos pacientes mais velhos. Os seguintes sinais clínicos foram mais freqüentes nos pacientes que eliminavam ovos de S. mansoni nas fezes, quando comparados ao grupo controle (sem ovos do parasita nas fezes, sem história de tratamento e com reação intradérmica negativa): a) nos pacientes com 2-14 anos, sangue nas fezes, fígado palpável, aumento da consistência e aumento do tamanho dos lobos direito e esquerdo do fígado; b) nos maiores de 15 anos, presença de fígado palpável; c) em ambos os grupos etários, as esplenomegalias estiveram exclusivamente relacionadas à infecção pelo S. mansoni.

Sub-micron structuring of silicon using femtosecond laser interferometry

We report the fabrication of planar sub-micron gratings in silicon with a period of 720 nm using a modified Michelson interferometer and femtosecond laser radiation. The gratings consist of alternated stripes of laser ablated and unmodified material. Ablated stripes are bordered by parallel ridges which protrude above the unmodified material. In the regions where ridges are formed, the laser radiation intensity is not sufficient to cause ablation. Nevertheless, melting and a significant temperature increase are expected, and ridges may be formed due to expansion of silicon during resolidification or silicon oxidation. These conclusions are consistent with the evolution of the stripes morphology as a function of the distance from the center of the grating.

Unidades de paisagem da zona Castro Verde – Mértola: contributos para uma gestão ambiental eficiente

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Gestão e Políticas Ambientais

Uso de redes mosquiteiras em crianças menores de 5 anos, numa zona rural de Angola

As crianças com menos de 5 anos são um dos grupos mais vulneráveis à malária. O uso de redes mosquiteiras tratadas com inseticida (MTIs) é considerada uma medida eficaz de prevenção e tem sido alvo de investimento internacional como forma de reduzir a morbilidade e mortalidade desta doença. O objetivo deste estudo é avaliar o uso de redes mosquiteiras nesta faixa etária.

Biologia de anofelinos amazônicos: XII. Ocorrência de espécies de Anopheles, dinâmica da transmissão e controle da malária na zona urbana de Ariquemes (Rondônia)

Dados sobre o grau de incidência e distribuição de espécies Anopheles, em Ariquemes (RO), evidenciaram que a diversidade é maior na periferia da cidade e que Anopheles darlingi é registrada em praticamente todas as localidades de coleta. O inquérito entomológico revelou níveis diferentes de penetração da espécie na área urbana, podendo-se constatar que os Setores 1 e 3 são áreas livres de malária; Setores 2 e 4 mostram riscos na periferia; e a Área Industrial e Setor de Áreas Especiais, Conjunto BNH, Setor 5 e Vila Velha constituem áreas de alto risco da malária. Nestes últimos, os índices de mosquitos por homem/hora foram os mais elevados, observando-se variações no decorrer das amostragens e conforme a localização da área urbana. Medidas de densidade populacional revelaram mudanças estacionais, sendo os menores valores registrados no período de inverno. A transmissão da malária é discutida, considerando-se: 1) o papel da estrutura física da cidade, na época da fundação, 2) os igarapés que margeam a área urbana e suas relações com o ciclo de desenvolvimento dos anofelinos, 3) os padrões comportamentais da atividade de picar das espécies correlacionados a ambientes naturais e às áreas ecologicamente alteradas, e 4) a importância do manuseio ambiental no controle da malária, para redução da densidade populacional. Para conter o processo migratório do vetor é proposto um cinturão de proteção à cidade, constituído de mata não densa, incluindo também proteção biológica para incentivar a zoofilia dos anofelinos. Os resultados de infecção natural, obtidos em áreas de autoctonia da malária, permitem citar A. darlingi como vetor, sendo discutida a possibilidade de que outras espécies estejam envolvidas na transmissão.

Non-volatile analysis in fruits by laser resonant ionization spectrometry: application to resveratrol (3,5,4 -trihydroxystilbene) in grapes

Applied Physics B Lasers and Optics, vol.71

Os pequenos proprietários e a gestão da propriedade na Zona de Intervenção Florestal Entre Douro e Sousa

O presente trabalho pretende criar um instrumento de apoio aos proprietários florestais particulares da ZIF EDS na decisão a melhor forma de rentabilizar as suas propriedades. Para responder a esta questão foi necessário, numa primeira fase, identificar quais as suas necessidades e preferências de forma a oferecer as propostas mais adequadas. Para o efeito recorreu-se a um inquérito, o qual permitiu saber quais as principais fontes de receitas. Complementarmente também permitiu recolher informação adicional sobre o comportamento e expectativas desses mesmos proprietários. Após identificado o âmbito de intervenção, fez-se um levantamento das alternativas mais adequadas, para as quais foi efetuado um estudo de rentabilidade.

Spectroscopy studies on conservation issues in modern and contemporary paintings

Dissertation presented to the Faculty of Sciences and Technology of New University of Lisbon in fulfilment of the requirements for the Master’s degree in Conservation and Restoration Specialization in easel painting