Maintenance or loss of dialect Andalusian features: Internal and external factors

In the last sixty years a steadily maintained process of convergence towards the Castilian national standard has been occurring in Southern Spain affecting urban middle-class speakers’ varieties, particularly phonology and lexis. As a consequence, unmarked features characterising innovative southern pronunciation have become less frequent and, at the same time, certain standard marked features have been adapted to the southern phonemic inventory. Then, urban middle-class varieties have progressively been stretching out the distance separating them from working-class and rural varieties, and bringing them closer to central Castilian varieties. Intermediate, yet incipient koineised varieties have been described including also transitional Murcia and Extremadura dialects (Hernández & Villena 2009, Villena, Vida & von Essen 2015). (1) Some of the standard phonologically marked features have spread out among southern speakers exclusively based on their mainstream social prestige and producing not only changes in obstruent phoneme inventory –i.e. acquisition of /s/ vs. /θ/ contrast, but also standstill and even reversion of old consonant push- or pull-chain shifts –e.g. /h/ or /d/ fortition, affricate /ʧ/, etc. as well as traditional lexis shift (Villena et al. 2016). Internal (grammar and word frequency) and external (stratification, network and style) factors constraining those features follow similar patterns in the Andalusian speech communities analysed so far (Granada, Malaga) but when we zoom in on central varieties, which are closer to the national standard and then more conservative, differences in frequency increase and conflict sites emerge. (2) Unmarked ‘natural’ phonological features characterising southern dialects, particularly deletion of syllable-final consonant, do not keep pace with this trend of convergence towards the standard. Thus a combination of southern innovative syllable-final and standard conservative onset-consonant features coexist. (3). The main idea is that this intermediate variety is formed through changes suggesting that Andalusian speakers look for the best way of accepting marked prestige features without altering coherence within their inventory. Either reorganisation of the innovative phonemic system in such a way that it may include Castilian and standard /s/ vs. /θ/ contrast or re-syllabification of aspirated /s/ before dental stop are excellent examples of how and why linguistic features are able to integrate intermediate varieties between the dialect-standard continuum.

Nonlinear development of matrix-converter instabilities

Matrix converters convert a three-phase alternating-current power supply to a power supply of a different peak voltage and frequency, and are an emerging technology in a wide variety of applications. However, they are susceptible to an instability, whose behaviour is examined herein. The desired “steady-state” mode of operation of the matrix converter becomes unstable in a Hopf bifurcation as the output/input voltage transfer ratio, q, is increased through some threshold value, qc. Through weakly nonlinear analysis and direct numerical simulation of an averaged model, we show that this bifurcation is subcritical for typical parameter values, leading to hysteresis in the transition to the oscillatory state: there may thus be undesirable large-amplitude oscillations in the output voltages even when q is below the linear stability threshold value qc.

The Pull of Beauty The Storefront for Art and Architecture

info:eu-repo/semantics/publishedVersion

High Frequency Class DE Converter Using a Multilayer Coreless PCB Transformer

In modern power electronics equipment, it is desirable to design a low profile, high power density, and fast dynamic response converter. Increases in switching frequency reduce the size of the passive components such as transformers, inductors, and capacitors which results in compact size and less requirement for the energy storage. In addition, the fast dynamic response can be achieved by operating at high frequency. However, achieving high frequency operation while keeping the efficiency high, requires new advanced devices, higher performance magnetic components, and new circuit topology. These are required to absorb and utilize the parasitic components and also to mitigate the frequency dependent losses including switching loss, gating loss, and magnetic loss. Required performance improvements can be achieved through the use of Radio Frequency (RF) design techniques. To reduce switching losses, resonant converter topologies like resonant RF amplifiers (inverters) combined with a rectifier are the effective solution to maintain high efficiency at high switching frequencies through using the techniques such as device parasitic absorption, Zero Voltage Switching (ZVS), Zero Current Switching (ZCS), and a resonant gating. Gallium Nitride (GaN) device technologies are being broadly used in RF amplifiers due to their lower on- resistance and device capacitances compared with silicon (Si) devices. Therefore, this kind of semiconductor is well suited for high frequency power converters. The major problems involved with high frequency magnetics are skin and proximity effects, increased core and copper losses, unbalanced magnetic flux distribution generating localized hot spots, and reduced coupling coefficient. In order to eliminate the magnetic core losses which play a crucial role at higher operating frequencies, a coreless PCB transformer can be used. Compared to the conventional wire-wound transformer, a planar PCB transformer in which the windings are laid on the Printed Board Circuit (PCB) has a low profile structure, excellent thermal characteristics, and ease of manufacturing. Therefore, the work in this thesis demonstrates the design and analysis of an isolated low profile class DE resonant converter operating at 10 MHz switching frequency with a nominal output of 150 W. The power stage consists of a class DE inverter using GaN devices along with a sinusoidal gate drive circuit on the primary side and a class DE rectifier on the secondary side. For obtaining the stringent height converter, isolation is provided by a 10-layered coreless PCB transformer of 1:20 turn’s ratio. It is designed and optimized using 3D Finite Element Method (FEM) tools and radio frequency (RF) circuit design software. Simulation and experimental results are presented for a 10-layered coreless PCB transformer operating in 10 MHz.

La migración infantil indocumentada de Centroamérica, un desafío a la reformulación de la política migratoria de Estados Unidos. Estudio de caso de Honduras (2010-2014)

El siguiente estudio de caso analiza la influencia de la llegada de la migración infantil indocumentada centroamericana en la reformulación de la política migratoria de Estados Unidos en el período 2010-2014. Enfocándose en el caso de Honduras para dar a conocer y analizar las causas que crean las dinámicas migratorias por parte de los menores, este trabajo analiza como la llegada de estas poblaciones genera ciertos efectos en el proceso de toma de decisión de las políticas internas de los Estados Unidos. Por un lado, para resaltar las características del fenómeno migratorio, se utilizan las teorías de redes sociales y la teoría push and pull. Por otro, mediante los conceptos de Sensibilidad y Vulnerabilidad expuestos en la teoría de la Interdependencia Compleja de las Relaciones Internacionales, como también el concepto de Seguridad Societal propuesto por Barry Buzan se estudia el nivel de influencia del fenómeno infantil en el gobierno norteamericano.

Blade pitch control malfunction simulation in a wind energy conversion system with MPC five-level converter

This paper is on a wind energy conversion system simulation of a transient analysis due to a blade pitch control malfunction. The aim of the transient analysis is the study of the behavior of a back-to-back multiple point clamped five-level full-power converter implemented in a wind energy conversion system equipped with a permanent magnet synchronous generator. An alternate current link connects the system to the grid. The drive train is modeled by a three-mass model in order to simulate the dynamic effect of the wind on the tower. The control strategy is based on fractional-order control. Unbalance voltages in the DC-link capacitors are lessen due to the control strategy, balancing the capacitor banks voltages by a selection of the output voltage vectors. Simulation studies are carried out to evaluate not only the system behavior, but also the quality of the energy injected into the electric grid.

HVDC Power Transmission Simulation for Offshore Wind System with Three-Level Converter

An integrated mathematical model for the simulation of an offshore wind system performance is presented in this paper. The mathematical model considers an offshore variable-speed turbine in deep water equipped with a permanent magnet synchronous generator using multiple point full-power clamped three-level converter, converting the energy of a variable frequency source in injected energy into the electric network with constant frequency, through a HVDC transmission submarine cable. The mathematical model for the drive train is a concentrate two mass model which incorporates the dynamic for the blades of the wind turbine, tower and generator due to the need to emulate the effects of the wind and the floating motion. Controller strategy considered is a proportional integral one. Also, pulse width modulation using space vector modulation supplemented with sliding mode is used for trigger the transistors of the converter. Finally, a case study is presented to access the system performance.

Measurement and simulation of conducted disturbances on DC power grids of a HVDC system with an active DC/DC converter

With the increasing of the distributed generation, DC microgrids have become more and more common in the electrical network. To connect devices in a microgrid, converter are necessary, but they are also source of disturbances due to their functioning. In this thesis, measurement and simulation of conducted emissions, within the frequency range 2-150kHz, of a DC/DC buck converter are studied.

WEC-Sim Application for the Assessment of Wave Energy Generation in the Tyrrhenian Sea and the North Sea Through the 2-Body Point Absorber (2BPA) and the Oscillating Surge Wave Energy Converter (OSWEC)

In recent years, developed countries have turned their attention to clean and renewable energy, such as wind energy and wave energy that can be converted to electrical power. Companies and academic groups worldwide are investigating several wave energy ideas today. Accordingly, this thesis studies the numerical simulation of the dynamic response of the wave energy converters (WECs) subjected to the ocean waves. This study considers a two-body point absorber (2BPA) and an oscillating surge wave energy converter (OSWEC). The first aim is to mesh the bodies of the earlier mentioned WECs to calculate their hydrostatic properties using axiMesh.m and Mesh.m functions provided by NEMOH. The second aim is to calculate the first-order hydrodynamic coefficients of the WECs using the NEMOH BEM solver and to study the ability of this method to eliminate irregular frequencies. The third is to generate a *.h5 file for 2BPA and OSWEC devices, in which all the hydrodynamic data are included. The BEMIO, a pre-and post-processing tool developed by WEC-Sim, is used in this study to create *.h5 files. The primary and final goal is to run the wave energy converter Simulator (WEC-Sim) to simulate the dynamic responses of WECs studied in this thesis and estimate their power performance at different sites located in the Mediterranean Sea and the North Sea. The hydrodynamic data obtained by the NEMOH BEM solver for the 2BPA and OSWEC devices studied in this thesis is imported to WEC-Sim using BEMIO. Lastly, the power matrices and annual energy production (AEP) of WECs are estimated for different sites located in the Sea of Sicily, Sea of Sardinia, Adriatic Sea, Tyrrhenian Sea, and the North Sea. To this end, the NEMOH and WEC-Sim are still the most practical tools to estimate the power generation of WECs numerically.

Modeling and Design of Phase Shifted Full Bridge Isolated DC-DC ZVS Converter with Peak Current Mode Control

Nowadays, there is a boom in the use of electrification. Electric vehicles are gaining interest worldwide due to various factors, including climate and environmental awareness. In this thesis, a step-down isolated power supply for electric tractors is investigated, specifically the phase-shifted full-bridge (PSFB) DC-DC with synchronous rectification and zero-voltage switching (ZVS). This converter was selected for its high-power capacity with high efficiency. A 3500 W PSFB converter with peak current control (PCCM) is designed and modeled in MATLAB. The input voltage range is from 550 V to 820 V and the output voltage range is limited to 9 V to 16 V with a maximum output current of 250 A. All components were commercially designed and selected, including magnetics for the high-frequency transformer and inductors, taking into account loss calculations. Zero voltage switching for the lagging leg is achieved at 13% to 100% load. The proven efficiency of the converter is around 90

Design and implementation of a synchronous interleaved boost converter for fuel cell-powered catamaran

The present work describes the different stages of design, implementation, and validation procedures for an interleaved DC-DC boost converter intended for the 2022 Futura, a fuel cell-powered racing catamaran developed by the UniBoAT team. The main goal of the entire design has been the significant reduction of the weight of the converter by removing heat sinks and reducing component size while increasing its efficiency by adopting high-end power switches and the interleaved architecture operated with a synchronous control strategy. The obtained converter has been integrated into the structure containing the fuel cell stack obtaining a fully integrated system. The realized device has been based on an interleaved architecture with six phases controlled digitally through the average current mode control. The design has been validated through simulations carried out using the software LT-Spice, whereas experimental validations have been performed by means of laboratory bench tests and on-field tests. Detailed thermal and efficiency analyses are provided with the bench tests under the two synchronous and non-synchronous operating modes and with the adoption of the phase shedding technique. The prototype implementation and its performance in real operating conditions are also discussed. Eventually, it is underlined as the designed converter can be used in other applications requiring a voltage-controlled boost converter.

"Tecniche di Load Pull attivo a bassa frequenza per la caratterizzazione in banda base di transistori per applicazioni RF"

Una sempre crescente quantità di informazione digitale viene condivisa tra miliardi di dispositivi connessi in ogni angolo del pianeta. Per riuscire a sfruttare una banda più ampia ed aumentare la velocità di trasmissione dei dati, i prossimi standard di telecomunicazioni wireless dovranno adoperare frequenze operative sempre più alte, cercando di rispettare stringenti specifiche in termini di affidabilità ed efficienza energetica. In generale, le prestazioni di un transistor dipenderanno dalle terminazioni a cui esso è collegato. In un setup di caratterizzazione e test, è possibile, tramite un metodo noto come load pull attivo, sintetizzare un determinato valore di impedenza ad uno o più piani di riferimento all'interno di un circuito. Questa strategia si basa in generale sulla manipolazione del rapporto tra onde entranti ed uscenti da un piano di riferimento del dispositivo. Se da una parte tecniche di load pull attivo a banda larga a radiofrequenza hanno ricevuto un notevole interesse sia commerciale che accademico, dall'altra le strategie per la sintesi di impedenze presenti al terminale di alimentazione dell'amplificatore, sono state meno investigate. Questo elaborato si propone di introdurre un algoritmo per il load pull attivo a banda base per amplificatori per applicazioni RF. Dopo un'introduzione sui modelli comportamentali degli amplificatori, è stato considerato il problema degli effetti di memoria. È stata poi descritta la tecnica per l'emulazione di impedenze. Dapprima, è stato considerato il caso lineare. Poi, tramite il design di un amplificatore di potenza per applicazioni a radio frequenza usato come device under test (DUT), sono stati affrontati due esempi in presenza di non linearità, verificando la correttezza della tecnica proposta tramite l'uso di simulazioni.

Bipolar Tribocharging Signal During Friction Force Fluctuations At Metal-insulator Interfaces.

Friction and triboelectrification of materials show a strong correlation during sliding contacts. Friction force fluctuations are always accompanied by two tribocharging events at metal-insulator [e.g., polytetrafluoroethylene (PTFE)] interfaces: injection of charged species from the metal into PTFE followed by the flow of charges from PTFE to the metal surface. Adhesion maps that were obtained by atomic force microscopy (AFM) show that the region of contact increases the pull-off force from 10 to 150 nN, reflecting on a resilient electrostatic adhesion between PTFE and the metallic surface. The reported results suggest that friction and triboelectrification have a common origin that must be associated with the occurrence of strong electrostatic interactions at the interface.

Paired Evaluation Of Calvarial Reconstruction With Prototyped Titanium Implants With And Without Ceramic Coating.

To investigate the osseointegration properties of prototyped implants with tridimensionally interconnected pores made of the Ti6Al4V alloy and the influence of a thin calcium phosphate coating. Bilateral critical size calvarial defects were created in thirty Wistar rats and filled with coated and uncoated implants in a randomized fashion. The animals were kept for 15, 45 and 90 days. Implant mechanical integration was evaluated with a push-out test. Bone-implant interface was analyzed using scanning electron microscopy. The maximum force to produce initial displacement of the implants increased during the study period, reaching values around 100N for both types of implants. Intimate contact between bone and implant was present, with progressive bone growth into the pores. No significant differences were seen between coated and uncoated implants. Adequate osseointegration can be achieved in calvarial reconstructions using prototyped Ti6Al4V Implants with the described characteristics of surface and porosity.