Resources Taken to the Nest by Protopolybia exigua (Hymenoptera, Vespidae) in Different Phases of the Colony Cycle, in a Region of the Medio Sao Francisco River, Bahia, Brazil

The present study aimed to identify what resources were taken to the nest by workers of Protopolybia exigua (de Saussure), to verify if there is a relationship between physical factors of weather and phases of colony development and the collection of different resources and also to observe if the wasps carry macerated prey in the crop. The species collected nectar (62.8%), wood pulp for nest building (6.1%), water(2.9%), prey (0.8%) and resin (0.2%). Moreover, workers of P exigua do carry macerated prey in the crop. There was a positive correlation (r = 0.85, p = 0.0004) between the presence of larvae in the nest and the carrying of solid contents in the crop, which provides strong evidence that this species macerates its prey while still in the field, before taking it to the nest. There was positive influence of the temperature on the collection of nectar (r = 0.89, p = 0.0001) and water (r = 0.46, p = 0.0066) and negative influence of relative air humidity on the collection of the same resources (r = - 0.88, p = 0.0001 and r = - 0.37, p = 0.0160, respectively). Luminosity influenced the gathering of water (r = 0.43, p = 0.0089) and Pulp for nest building (r = 0.31, p = 0.0274) and the wind speed did nor influence the collection of any resources. Nectar is the main item taken to the nest during all phases of the colony.

Chromosomal location of heterochromatin and 45S rDNA sites in four South American triatomines (Heteroptera: Reduviidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nest deprivation and mating success in Nile tilapia (Teleostei: Cichlidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Influence of Cutting Speed and Cutting Initiation Location in Specimen Preparation for the Microtensile Bond Strength Test

Purpose: This study evaluated the effect of cutting initiation location and cutting speed on the bond strength between resin cement and feldspathic ceramic.Materials and Methods: Thirty-six blocks (6.4 x 6.4 x 4.8 mm) of ceramic (Vita VM7) were produced. The ceramic surfaces were etched with 10% hydrofluoric acid gel for 60 s and then silanized. Each ceramic block was placed in a silicon mold with the treated surface exposed. A resin cement (Variolink II) was injected into the mold over the treated surface and polymerized. The resin cement-ceramic blocks were divided into two groups according to experimental conditions: a) cutting initiation location - resin cement, ceramic and interface; and b) cutting speed - 10,000, 15,000, and 20,000 rpm. The blocks were sectioned to achieve non-trimmed bar specimens. The microtensile test was performed in a universal testing machine (1 mm/min). The failure modes were examined using an optical light microscope and SEM. Bond strength results were analyzed using one-way ANOVA and Tukey's test (alpha = 0.05).Results: Significant influences of cutting speed and initiation location on bond strength (p < 0.05) were observed. The highest mean was achieved for specimens cut at 15,000 rpm at the interface (15.12 +/- 5.36 MPa). The lowest means were obtained for specimens cut at the highest cutting speed in resin cement (8.50 +/- 3.27 MPa), and cut at the lowest cutting speed in ceramic (8.60 +/- 2.65MPa). All groups showed mainly mixed failure (75% to 100%).Conclusion: The cutting speed and initiation location are important factors that should be considered during specimen preparation for microtensile bond strength testing, as both may influence the bond strength results.

Spectroscopy properties and energy level location of Gd(2)O(2)S:Pr(3+),Ce(3+)

In this work we propose the study of the spectroscopy properties and the energy level location of Ce(3+) and Pr(3+) in Gd(2)O(2)S, along with the effects of Ce(4+) (Ce(2)O(2)S(2)) incorporation in Gd(2)O(2)S and Gd(2)O(2)S: Pr(3+) in order to understand the formation and position of the associated defects energy levels in relation to the band structure of Gd(2)O(2)S and Pr(3+) energy levels. Ce-, Pr(3+)-doped and Pr(3+), Ce-doped Gd(2)O(2)S were prepared by the sulfidization of a basic gadolinium carbonate with S(8) using H(2)/N(2) (3.0/97.0%) and air during the firing of the precursor. Samples were analyzed by X-ray diffraction in order to guarantee the formation of the Gd(2)O(2)S single phase. Diffuse reflectance spectroscopy and luminescent measurements (emission/excitation) were used to locate Ce(3+), Pr(3+) and defects energy levels in relation to the band structure of Gd(2)O(2)S. (C) 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Foam nest in Scinax rizibilis (Amphibia: Anura: Hylidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Errors due to the tropospheric and ionospheric effects on the geographic location of data collection platforms

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nest architecture of the leaf-cutting ant Acromyrmex rugosus rugosus

The prominent nests mounds of many ant species are one of the most obvious signs of their presence, yet the subterranean architecture of nests is often poorly known. The present work aimed to establish the external and internal structure of nests of a species of leaf-cutting ant, Acromyrmex rugosus rugosus, by either marking the interior of nests with talcum powder, or forming casts with cement. Twelve nests were excavated and surveyed, with eight being marked with talcum powder and four cast with cement. The external and internal structure of the nests was highly variable. The largest and smallest nests had mound areas of 9.89 m(2) and 0.01 m(2) respectively. The number of chambers found ranged from I to 26, with maximum dimensions of between 6 and 70 cm. Chambers were found close to the soil surface (6 cm) down to a maximum depth of 3.75 m. In addition to chambers containing fungus garden, some chambers were found to be empty, filled with soil or filled with waste, the first time this has been recorded in a species of Acromyrmex. The nests of A. rugosus rugosus appear to be unusually complex for the genus, containing a diversity of irregular chambers and tunnels.

NEST REUSE AND COMMUNAL NESTING IN MICROTHURGE-CORUMBAE (HYMENOPTERA, MEGACHILIDAE), WITH SPECIAL REFERENCE TO NEST DEFENSE

Observations on the nesting activities of Microthurge corumbae, carried out at the University Campus of Ribeirao Preto, São Paulo, Brazil, from 1977 to 1981, indicated that 61.9% of nests were re-used by succeeding generations. Re-use by one generation was more frequent than by two generations, and re-use by a third was observed only once. Nests were re-used by one or several females. Single females were more frequently in the first re-use. In these cases nest re-use did not differ essentially from the solitary foundation of a new nest, except for the adoption of a pre-existing nest without excavation. In multifemale nests, analysis of relative age (wing wear), ovarian and spermathecal conditions of associated females and the content of nests at excavation indicated that the social pattern in such colonies is communal. There is some evidence that the associated females are relatives. The chalcidoid wasp Leucospis was the principal nest parasite, and ants of the genus Crematogaster were nest predators. In multifemale nests, the rate of parasitism was significantly lower than in solitary nests, indicating that nest-sharing resulted in improved nest defense. on the other hand. The absence of predation on immatures of the first generation of M. corumbue in multifemale nests suggests that such nests are also more resistant to attack by predators.

EXPERIMENTAL INCIPIENT NEST TRANSPLANTS AND SURVIVORSHIP OF SOLENOPSIS-INVICTA BUREN (HYM, FORMICIDAE) IN BRAZIL

Transplants of incipient colonies of the fire ant, Solenopsis invicta into areas in which mature colonies had been eliminated did not result in higher rates of success than in areas in which mature colonies were present. However for both types of sites, Pogonomyrmex (Ephebomyrmex) nagelli colonies were found in cleared sites used for transplants, with the number of translocated P. nagelli nests higher in areas which had not been treated with Mirex for S. invicta colony reduction. These results suggest that small colonies may be displaced by larger colonies of other species.

Nest architecture of Atta laevigata (F. Smith, 1858) (Hymenoptera : Formicidae)

The internal structure of three nests of Atta laevigata was studied in Botucatu city, São Paulo State, Brazil. Two nests were excavated through the opening of trenches and one was cement-moulded to enable a better view of the internal structures. The three nests presented a similar structure, with the depths and number of chambers varying as a function of the loose soil area of the nests. The number of chambers ranged from 1149 to 7864, reaching as deep as 7 m underground. Chamber volume ranged from 0.03 to 511. The foraging tunnels extended as far as 70m from the loose soil region. The nests of this species are the deepest within the genus Atta and have the highest number of chambers.

PATTERNS OF COLONIZATION AND INCIPIENT NEST SURVIVAL IN ACROMYRMEX-NIGER AND ACROMYRMEX-BALZANI (HYMENOPTERA, FORMICIDAE)

Patterns of colonization by queens and incipient nest survival of the leaf-cutting ants Acromyrmex niger and Acromyrmex balzani were studied by means of belt transects and individually marked incipient nests. No relation was found between colony density and the number of colonization attempts. Both species are not claustral, and high rates of queen mortality were attributed to conspecific executions and predation. of other discernable mortality factors, failure of fungal garden establishment was the most important. Only 34 of 296 A. balzani and 13 of 154 A. niger marked colonies were alive at the end of one year. These figures are higher than those reported for species of Atta. These results are contrasted with those of claustral-founding Atta species. Small colonies are occasionally raided by larger colonies which robbed brood.

EFFECT OF SESAME (SESAMUM-INDICUM L) ON NEST DEVELOPMENT OF ATTA-SEXDENS-RUBROPILOSA FOREL (HYM, FORMICIDAE)

The present study showed a strong deleterious effect on leaf-cutting ant Atta sexdens rubiopilosa nests supplied exclusively with sesame (Sesamum indicum) leaves in the laboratory. Sesame leaves were initially attractive to workers and later became antifeedant. Eucaliptus alba and Hibiscus rosa-sinensis leaves were used as control.