948 resultados para mount


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este trabalho teve como objetivo avaliar o desempenho produtivo e reprodutivo de vacas de corte primíparas, suplementadas com uréia no período seco. Foram utilizadas 58 fêmeas mestiças Tabapuã x Nelore, prenhas, com idade média de 39 meses e peso médio de 399 kg. Os animais experimentais foram vermifugados e divididos em dois grupos, um grupo (A) suplementado com sal mineral e o outro (B) com sal mineral enriquecido com uréia, na proporção de 80:20 (sal:uréia). Os animais foram mantidos em uma área de 50 hectares de capim Brachiaria brizantha, sendo 25 hectares para cada grupo. Durante os meses de agosto a novembro, período mais seco do ano na região, o pasto apresentou em média 5.800 kg de matéria seca por hectare com 6,2% de proteína bruta. As misturas minerais foram administradas em cochos cobertos de forma a atender um consumo ad libitum durante o período seco. O delineamento experimental utilizado foi o inteiramente casualizado com dois tratamentos. Foi verificada diferença no peso vivo ao final do experimento (PVF) entre os tratamentos com sal mineral e sal mineral com uréia, com valores médios de 360,1 kg e 385,8 kg, respectivamente. Também foi observada diferença para o ganho médio diário, com média de 0,465 kg/an/dia para o grupo tratado com uréia, e 0,284 kg/an/dia para o grupo controle, com ganho pós-parto de 41,2 e 26,5 kg/animal, respectivamente. O melhor desempenho dos animais suplementados deve estar relacionado ao aumento no consumo de matéria seca promovido pela suplementação com uréia (12,610 kg contra 8,744 kg). O melhor desenvolvimento corporal (peso e escore corporal) ao início da estação de monta refletiu na manifestação de cio dos animais, sendo que 75% das vacas suplementadas com uréia já haviam manifestado cio durante os primeiros 60 dias da estação de monta contra apenas 53,33% das não suplementadas. Quando se avaliou o período integral da estação de monta não foi observado diferença entre a manifestação de cio das fêmeas suplementadas ou não, fato relacionado ao bom escore corporal apresentado pelos animais ao fim da estação de monta, 3,7 nas fêmeas suplementadas e 2,9 nas não suplementadas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEG

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The brachytherapy braquiterapia is an x-ray modality radiotherapy in which stamped or halfstamped radioactive sources in format of seeds are used, wires or to one short distance, in contact or implanted to the fabric to be treated. All the treatment modalities require a previous planning. The formalism recommended for calculation of dose was considered by the AAPM for the first TG-43 Report. In it distributions of dose of isolated seeds measured and calculated by Monte Carlo method in water instead of with models half-empiricists. In this work we in accordance with present some preliminary results of the calculation of functions of radial anisotropy and of dose in the distance for seed of 192Ir, wide used in brachytherapy treatments of high tax of dose (HDR), with the aid of the program based on the Monte Carlo method MCNPX v2.50 (Mount Carlo N ParticleeXtended). The materials chosen in the simulation beyond water, had been MS20 and estriado muscle

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The brachytherapy braquiterapia is an x-ray modality radiotherapy in which stamped or halfstamped radioactive sources in format of seeds are used, wires or to one short distance, in contact or implanted to the fabric to be treated. All the treatment modalities require a previous planning.The formalism recommended for calculation of dose was considered by the AAPM for the first TG-43 Report. In it distributions of dose of isolated seeds measured and calculated by Monte Carlo method in water instead of with models half-empiricists.In this work we in accordance with present some preliminary results of the calculation of functions of radial anisotropy and of dose in the distance for seed of 192Ir, wide used in brachytherapy treatments of high tax of dose (HDR), with the aid of the program based on the Monte Carlo method MCNPX v2.50 (Mount Carlo N ParticleeXtended).The materials chosen in the simulation beyond water, had been MS20 and estriado muscle

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Are being released in the construction market in Brazil ventures called Super 6. These businesses sell the promise of delivery of the apartment in six months after the launch of the venture. To meet this deadline are being deployed the constructive method of concrete walls using aluminum shapes. This system basically consists of pouring slabs and walls once, i.e. building up the wall shapes and slab joints. On the walls are used cloth, with reinforcements in vain and corners of walls and on these screens are tied the electrical boxes and conduits. For each tower is used the so-called system of half way, i.e. the system so it is sufficient to mount the Middle deck. Using a concrete which can be deformed in the next day you can lift one deck every two days with ready electric and hydraulicsystem, without having to tow the wall doing only minor fixes in the imperfections after concrete. With this system won an incredible speed in the construction of the structure reducing in almost one-third the length of the work. This work aims to compare in terms of cost-benefit of masonry structural systems and this new concrete wall system called Super 6. For this comparison will be used as parameter values used for the achievement of the Enterprise Portal of Roses of constructor Tenda which is one of the first to use concrete wall system. This project basically consists of seven towers of six floors each and will be budgeted the cost of this project if it were held in structural masonry. From these data it will be possible to make a comparison about the actual beneficial to adopt this system

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper aims to present the design, development and construction of a reducer / multiplier speeds low cost, sturdy and easy operation. The beginning of the project was given to research on issues related to mechanisms and machine elements, and these theories of fundamental importance in the development of items of equipment which, together with the aid of AutoCAD software, enabled the construction of it. Parallel to the sizing of equipment, were also investigated and taken into account the costs of materials used in the project. Made to mount the reducer / multiplier speeds it was at the evidence through experiments involving the use of torque wrench, tachometer and weights, getting proven applicability in situations that are small or medium loads required

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Cirurgia Veterinária - FCAV

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The main objective of this work was to mount and test an experimental model to measure the hydraulic conductance of ex vivo dentin. Seventeen healthy third molars, with indication of extraction of healthy donors aged between 15 and 30 years were obtained by informed consent. After cleaning them, disinfecting them, including them in resin epoxy and cutting them, there were 17 samples of dentin, corresponding to a disk of resin with a coronal section of tooth showing the dentin exposed on both sides of it. Three machines to measure the hydraulic conductance of the dentin were assembled according to the description of the model of Pashley. Samples were installed in a Chamber of diffusion, connected by using silicone tubes to a graduated transfer pipette and a 20cm water column. Through the displacement of a bubble of water in the inside of the pipette, the hydraulic conductance of each sample was measured 3 times on the 14th, 21st, 28th and 35th day post extraction. The data were tabulated and analyzed statistically. There is no SS difference in the rate of flow of a measured sample in the three machines (p=0.5937). There is no SS difference in measurements of the hydraulic conductance of 13 samples of human dentin measured in days 14, 21, 28 and 35 postextraction (p=0.0704). It is possible to mount an experimental model to study the hydraulic conductance of dentin ex vivo, based on the model of Pashley. The model seems to be reliable, but more research is needed in order to validate its reliability.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The problem of shock generated vibration is very common in practice and difficult to isolate due to the high levels of excitation involved and its transient nature. If not properly isolated it could lead to large transmitted forces and displacements. Typically, classical shock isolation relies on the use of passive stiffness elements to absorb energy by deformation and some damping mechanism to dissipate residual vibration. The approach of using nonlinear stiffness elements is explored in this paper, focusing in providing an isolation system with low dynamic stiffness. The possibilities of using such a configuration for a shock mount are studied experimentally following previous theoretical models. The model studied considers electromagnets and permanent magnets in order to obtain nonlinear stiffness forces using different voltage configurations. It is found that the stiffness nonlinearities could be advantageous in improving shock isolation in terms of absolute displacement and acceleration response when compared with linear elastic elements. Copyright (C) 2015 Elsevier Ltd. All rights reserved

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)