小麦抗禾谷孢囊线虫（ Heterodera avenae）相关基因的研究

禾谷孢囊线虫严重影响禾谷类作物的产量，在小麦中由禾谷孢囊线虫引起的产量损失可达30-100%。尤其在澳大利亚、欧洲、印度和中东危害严重，目前禾谷孢囊线虫已成为危害我国作物的主要病源。控制禾谷孢囊线虫的方法主要有：作物轮作、杀线虫剂、寄主抗性等等，其中基因工程方法培育抗线虫小麦品种被认为是最经济有效的方法。分离抗禾谷类孢囊线虫基因对揭示抗性基因结构与功能及其表达调控具有重要意义。 尽管小麦是重要的粮食作物，在小麦中已发现的抗禾谷孢囊线虫的基因很少，而比其近缘属如节节麦、易变山羊草、偏凸山羊草中含有丰富的抗源。目前已鉴定出禾谷孢囊线虫抗性位点Cre，并发现了9个禾谷孢囊线虫抗性基因(Cre1,2, 3, 4, 5, 6, 7, 8, and R) ，其中只有Cre1和Cre8直接从普通小麦中获得。从节节麦中获得的Cre3基因能最有效的控制线虫数量，其次是Cre1和Cre8。这些基因的克隆对于了解禾谷孢囊线虫抗性机制及进一步的育种应用都是非常关键的。然而，目前为止仅有Cre3基因通过图位克隆的方法从节节麦中被分离得到。该基因已被克隆得到的多数线虫抗性基因一样均属于核苷酸结合位点区（NBS）－亮氨酸重复序列区（LRR）基因家族。目前，已有很多抗性基因被分离，这些已知的NBS-LRR类抗性基因的保守序列为应用PCR的方法克隆新的抗性基因提供了可能。 因此本课题的目的是采用保守区同源克隆、3′RACE 和5′RACE 等方法从抗禾谷孢囊线虫小麦-易变山羊草小片段易位系E10 中克隆小麦抗禾谷孢囊线虫基因全序列，进而通过半定量PCR 和荧光定量PCR 研究该基因的表达模式。同时通过mRNA 差别显示技术和任意引物PCR（RAP-PCR）技术分离克隆植物禾谷孢囊线虫抗性基因及其相关基因，为阐明植物抗病性分子机制以及改良作物抗病性和作物育种提供基础，为通过分子标记辅助育种和基因工程方法实现高效、定向转移抗病基因到优良小麦品种奠定了重要的理论和物质基础。主要研究结果： 1． 本实验根据此前从抗禾谷孢囊线虫材料E-10 扩增得到的与来自节节麦的抗禾谷孢囊线虫Cre3 基因及其他的NBS-LRR 类抗性基因的NBS 和LRR 保守区序列设计了两对特异性引物，从E10 中扩增到532bp 和1175bp 的两个目标条带，它们有一个32bp 的共同序列，连接构成总长为1675bp 的NBS-LRR 编码区（命名为RCCN）。根据RCCN设计引物，利用NBS-LRR区序列设计引物，通过5′RACE 和3′RACE 技术采用3′-Full RACE Core Set(TaKaRa)和5'-Full RACE Kit (TaKaRa)试剂盒，反转录后通过嵌套引物GSP1 和GSP2 分别进行两轮基因特异性扩增，分别将NBS_LRR 区向5′端和3′端延伸了1173bp 和449bp，并包含了起始密码子和终止密码子。根据拼接的得到的序列重新设计引物扩增进行全基因扩增的结果与上面获得的一致。拼接后得到全长2775 bp 的基因序列（记作CreZ, GenBank 号：EU327996）。CreZ 基因包括完整的开放阅读框，全长2775 bp，编码924个氨基酸。序列分析表明它与已知的禾谷孢囊线虫抗性基因Cre3的一致性很高，并且它与已经报到的NBS-LRR 类疾病抗性基因有着相同的保守结构域。推测CreZ基因可能是一个新的NBS-LRR 类禾谷孢囊线虫抗性基因，该基因的获得为通过基因工程途径培育抗禾谷孢囊线虫小麦新品种奠定了基础，并为抗禾谷孢囊线虫基因的调控表达研究提供了参考。 2． 通过半定量PCR和SYBR Green荧光定量PCR技术对CreZ基因的相对表达模式进行了研究。以α-tubulin 2作为参照，采用半定量PCR 分析CreZ 基因在不同接种时期1d, 5d, 10, 15d 的E-10的根和叶的的表达情况。在内参扩增一致的条件下，CreZ 在E-10的根部随着侵染时间的增加表达量有明显的增加，在没有侵染的E-10的根部其表达量没有明显变化，而在叶中没有检测表达，说明该基因只在抗性材料的根部表达。SYBR Green定量PCR分析接种前后E10根部基因CreZ基因的表达水平为检测CreZ基因的表达建立了一套灵敏、可靠的SYBRGreen I 荧光定量PCR 检测方法。接种禾谷孢囊线虫后E10根内CreZ基因的相对表达水平显著高于接种前。随接种时间的延长持续增加，最终CreZ基因的相对表达量达到未接种的对照植株的10.95倍。小麦禾谷孢囊线虫抗性基因CreZ的表达量与胁迫呈正相关，表明其与小麦的的禾谷孢囊线虫抗性密切相关，推测CreZ基因可能是一个新的禾谷孢囊线虫候选抗性基因。 3． 针对小麦基因组庞大、重复序列较多，禾谷孢囊线虫抗性基因及其相关基因的片断难以有效克隆的问题，通过mRNA 差别显示技术及RAP-PCR 技术分离克隆植物禾谷孢囊线虫抗性及其相关基因。试验最终得到154 条差异表达条带，将回收得到的差异条带的二次PCR 扩增产物经纯化后点到带正电的尼龙膜上，进行反向Northern 杂交筛选，最终筛选得到102 个阳性差异点。将其中81 个进行测序，并将序列提交到Genbank 中的dbEST 数据库，分别获得登录号(FE192210 -FE192265，FE193048- FE193074 )。序列比对分析发现，其中26 个序列与已知功能的基因序列同源；有28 条EST 序列在已有核酸数据库中未找到同源已知基因和EST，属新的ESTs 序列；另外27 个EST 序列与已知核酸数据库中的ESTs 具有一定相似性，但功能未知。其所得ESTs 序列补充了Genbank ESTs 数据库，为今后进一步开展抗禾谷类孢囊线虫基因研究工作打下了基础。结合本试验功能基因的相关信息，对小麦接种禾谷孢囊线虫后产生的抗性机制进行了探讨。接种禾谷孢囊线虫后植物在mRNA 水平上的应答是相当复杂的，同时植物的抗病机制是一个复杂的过程，涉及到多个代谢途径的相互作用。 The cereal cyst nematode (CCN), Heterodera avenae Woll, causes severe yieldreductions in cereal crops. The losses caused by CCN can be up to 30-100% in somewheat fields. At present, cereal cyst nematode has become the major disease sourcein China and it also damaged heavily in Australia, Europe, India and Middle East.The damage caused by CCN can be mitigated through several methods, includingcrop rotation, nematicide application, cultural practice, host resistance, and others.Of these methods, incorporating resistance genes into wheat cultivars and breedingresistant lines is considered to be the most cost-effective control measure forreducing nematode populations. Although wheat is an economically important crop around the world, far fewergenes resistant to CCN were found in wheat than were detected in its relatives, suchas Aegilops taucchi, Aegilops variabilis and Aegilops ventricosa. Cloning these genesis essential for understanding the mechanism of this resistance and for furtherapplication in breeding. Because of the huge genome and high repeat sequencescontent, the efficient methods to clone genes from cereal crops, are still lacking. A resistance locus, Cre, has been identified and 9 genes resistant to CCN (designatedCre1, 2, 3, 4, 5, 6, 7, 8, and R) have been described, in which Cre1 and Cre8 werederived directly from common wheat. The Cre3 locus, which was derived from Ae.tauschii, has the greatest impact on reducing the number of female cysts, followed byCre1 and Cre8. Cloning these genes is essential for understanding the mechanism ofthis resistance and for further application in breeding. However, to this point, only Cre3, a NBS-LRR disease resistance gene, has been obtained through mappingcloning in Ae. tauschii. The majority of nematode resistance genes cloned so far belong to a super familywhich contains highly conserved nucleotide-binding sites (NBS) and leucine-richrepeat (LRR) domains. To date, many NBS-LRR resistance genes have been isolated.The conserved sequences of these recognized NBS-LRR resistance genes provide thepossibility to isolate novel resistance genes using a PCR-based strategy. The aim of the present study was to clone the resistance gene of CCN fromWheat/Aegilops variabilis small fragment chromosome translocation line E10 whichis resistant to CCN and investigate the espression profiles of this gene withsemi-quantitative PCR and real-time PCR. Another purpose of this study is cloningthe relational resistance gene for CCN by mRNA differential display PCR andRAP-PCR. These works will offer a foundation for disease defence of crop andbreeding and directional transferring resistance gene into wheat with geneengineering. Primary results as following: 1．According to the conversed motif of NBS and LRR region of cereal cystnematode resistance gene Cre3 from wild wheat (Triticum tauschlii) and the knownNBS-LRR group resistance genes, we designed two pairs of specific primers for NBSand LRR region respectively. One band of approximately 530bp was amplified usingthe specific primers for conversed NBS region and one band of approximately 1175bpwas amplified with the specific primers for conversed LRR region. After sequencing,we found that these two sequences included 32bp common nucleotide having 1675bpin total, which was registered as RCCN in the Genbank. Based on the conservedregions of known resistance genes, a NBS-LRR type CCN resistance gene analog wasisolated from the CCN resistant line E-10 of the wheat near isogenic lines (NILs), by5′RACE and 3′ RACE.designated as CreZ (GenBank accession number: EU327996) .It contained a comlete ORF of 2775 bp and encoded 924 amino acids. Sequencecomparison indicated that it shared 92% nucleotide and 87% amino acid identitieswith those of the known CCN-resistance gene Cre3 and it had the same characteristic of the conserved motifs as other established NBS-LRR disease resistance genes. 2． Usingα-tubulin 2 as exoteric reference, semi-quantitative PCR and real-timePCR analysis were conducted. The expression profiling of CreZ indicated that it wasspecifically expressed in the roots of resistant plants and its relative expression levelincreased sharply when the plants were inoculated with cereal cyst nematodes. therelative expression level of the 15days-infected E10 is the 10.95 times as that ofuninfected E10,ultimately. It was inferred that the CreZ gene be a novel potentialresistance gene to CCN. 3．We cloned the relational resistance gene for CCN by mRNA differentialdisplay PCR and arbitrarily primed PCR fingerprinting of RNA from wheat whichpossess huge and high repeat sequence content genomes. Total 154 differentialexpression bands were separated and second amplified by PCR. The products werenylon membrane. The 102 positive clones were filtrated by reverse northern dot blotand 81 of those were sent to sequence. The EST sequences were submitted toGenbank (Genbank accession: FE192210 - FE192265, FE193048 - FE193074). Thesequences alignment analysis indicated 26 of them were identical with known genes;28 were not found identical sequence in nucleic acid database; another 27 ests wereidentical with some known ests, but their functions were not clear. These ESTsenriched Genbank ESTs database and offered foundation for further research ofresistance gene of CCN.

Assembly of the highest connectivity Wells-Dawson polyoxometalate coordination polymer: the use of organic ligand flexibility

Through tuning the length of flexible bis(triazole) ligands and different metal ion coordination geometries, four Wells-Dawson polyoxoanion-based hybrid compounds, [Cu-6(btp)(3)(P2W18O62)] center dot 3H(2)O (1) (btp = 1,3-bis(1,2,4-triazol-1-yl)propane), [Cu-6(btb)(3)((P2W18O62) center dot 2H(2)O (2), [Cu-3(btb)(6)(P2W18O62)] center dot 6H(2)O (btb = 1,4-bis(1,2,4-triazol-1-yl)butane) (3), and [Cu-3(btx)(5.5)((P2W18O62) center dot 4H(2)O (btx = 1,6-bis(1,2,4-triazol-1-yl)hexane) (4), were synthesized and structurally characterized. in compound 1, the metal-organic motif exhibits a ladder-like chain, which is further fused by the ennead-dentate [P2W18O62](6-) anions to construct a 3D structure. In compound 2, the metal-organic motif exhibits an interesting Cu-btb grid layer, and the ennead-dentate polyoxoanions are sandwiched by two Cu-btb layers to construct a 3D structure

A simple and sensitive colorimetric pH meter based on DNA conformational switch and gold nanoparticle aggregation

A simple and rapid colorimetric pH meter has been developed based on the conformational switch of i-motif DNA and non-crosslinking AuNP aggregation, the average accuracy of the nano-meter was found to be +/- 0.04 pH unit across the physiological operating range.

Metal-organic frameworks based on the pyridine-2,3-dicarboxylate and a flexible bispyridyl ligand: syntheses, structures, and photoluminescence

Three new metal-organic coordination polymers, [Cu(2,3-pydc)(bpp)]center dot 2.5H(2)O (1), [Zn(2,3-pydc)(bpp)]center dot 2.5H(2)O (2) and [Cd(2,3-pydc)(bpp)(H2O)]center dot 3H(2)O (3) (2,3-pydcH(2) = pyridine-2,3-dicarboxylic acid, bpp 1,3-bis(4-pyridyl)propane), have been synthesized at room temvperature. All complexes have metal ions serving as 4-connected nodes but represent two quite different structural motifs. Complexes 1 and 2 are isomorphous, both of which feature 2D -> 3D parallel interpenetration. Each two-dimensional (2D) layer with (4, 4) topology is interlocked by two nearest neighbours, one above and one below, thus leading to an unusual 3D motif. Complex 3 has a non-interpenetrating 3D CdSO4 framework with cavities occupied by uncoordinated water molecules.

A DNA nanomachine induced by single-walled carbon nanotubes on gold surface

Single-walled carbon nanotubes (SWNTs) can selectively induce human telomeric i-motif DNA formation at pH 7.0. Based on this property, we design a DNA nanomachine induced by SWNTs on gold surface. The motor DNA is human telomeric G-quadruplex DNA. The reversible hybridization between the motor DNA and its complementary human telomeric i-motif DNA can be modulated by SWNTs without changing solution pH. Up to now, to our knowledge, there is no report to show that a DNA nanomachine is induced by SWNTs or a DNA nanomachine can detect i-motif formation at pH 7.0. Our work may provide a new concept for designing an SWNT-induced DNA nanomachine and for the detection of i-motif DNA structure at pH 7.0. DNA hybridization, conformational transition and i-motif formation have been characterized on surface or in solution by fluorescence confocal microscopy, circular dichroism, DNA melting and gel electrophoresis. The folding and unfolding kinetics of the DNA nanomachine on gold surface were studied by Fourier transform-surface plasmon resonance (FT-SPR). All these results indicate that SWNTs can induce the DNA nanomachine to work efficiently and reversibly.

Assembly process of CuHCF/MPA multilayers on gold nanoparticles modified electrode and characterization by electrochemical SPR

Gold nanoparticles were deposited onto 2-mercaptoethylamine (MEA)-assembled planar gold thin film to construct gold nanoparticles modified electrode by virtue of a solution-based self-assembly strategy. Subsequently, 3-mercaptopropionic acid (MPA)-bridged copper hexacyanoferrate (CuHCF) multilayers were constructed on the as-prepared gold nanoparticles modified electrode. The resulted multilayer nanostructures were investigated by electrochemical surface plasmon resonance (EC-SPR) and atomic force microscopy (AFM) with primary emphasis upon the effect of the gold nanoparticles on the MPA/CuHCF multilayers growth and their surface morphology. Compared with the multilayer system on a planar gold electrode, the different electrochemical and optical properties might result from higher curvature effect and extraordinary surface-to-volume ratio characteristic of gold nanoparticles and the nanoparticle-selective growth of CuHCF. A dendrimer-like assembly process was proposed to explain the experiment results. This new motif of multilayer on the gold nanoparticles modified electrode was different from that of on a planar gold electrode, indicating a potential application of EC-SPR technique in the study of nanocomposite materials.

mer-(4-aminobenzenesulfonato-kappa N)triapua(1,10-phenanthroline-kappa N-2,N ')cobalt(II) chloride

Both coordination and hydrogen bonds contribute to networking in the supramolecular title compound, [Co(C6H6NO3S)(C12H8N2)(H2O)(3)]Cl, which contains a discrete [Co(C6H6NO3S)(C12H8N2)(H2O)(3)](+) complex cation, formed by one 4-aminobenzenesulfonate ligand, one 1,10-phenanthroline ligand and three coordinated water molecules, together with one uncoordinated chloride anion. These discrete cations and chloride anions are connected by hydrogen-bonding interactions into a two-dimensional supramolecular motif. Further hydrogen-bonding interactions consolidate the structural architecture and extend the two-dimensional supramolecular structure into a three-dimensional network.

Bis[tris(2,2 '-bipyridyl-kappa N-2,N ')iron(II)] cyclo-tetravanadate decahydrate

The hydrothermal reactions of metavanadate and divalent iron salts in the presence of nitrogen-donor chelating ligands yield the complex [Fe(C10H8N2)(3)](2)[V4O12].10H(2)O, which consists of one centrosymmetric eight-membered ring [V4O12](4-) anion cluster, formed by four VO4 tetrahedra sharing vertices, two discrete octahedral [Fe(C10H8N2)(3)](2+) cations, formed by three 2,2'-bipyridyl ligands coordinated to Fe-II, and ten water molecules of solvation. The anion and coordination cations are isolated and form anion and cation layers, respectively. In the anion layers, these anions and water molecules of solvation are linked to each other, in a two-dimensional motif, through hydrogen-bonding interactions.

Interactions of the human telomeric DNA with terbium-amino acid complexes

The human telomeric DNA can form four-stranded structures: the G-rich strand adopts a G-quadruplex conformation stabilized by G-quartets and the C-rich strand may fold into an I-motif based on intercalated C (.) C+ base pairs. There is intense interests in the design and synthesis of compounds which can target telomeric DNA and inhibit the telomerase activity. Here we report the thermodynamic studies of the two newly synthesized terbium-amino acid complexes bound to the human telomeric G-quadruplex and I-motif DNA which were studied by means of UV-Visible, DNA meltings, fluorescence and circular dichroism. These two complexes can bind to the human telomeric DNA and have shown different features on DNA stability, binding stoichiometry, and sequence-dependent fluorescence enhancement. To our knowledge, this is the first report to show terbium-amino acid complexes can interact with the human telomeric DNA.

Poly[di-mu(3)-chloro-mu(2)-trans-1,2-di-4-pyridylethylene-dicopper(I)]: a two-dimensional organic-inorganic hybrid constructed from linear CuCl clusters and bridging ligands

The structure of the title compound, [Cu2Cl2(C12H10N2)](n), contains infinite CuCl staircase-like chains, which lie about inversion centres. The trans-1,2-di-4-pyrid-ylethyl-ene mol-ecules also lie about inversion centres and connect the CuCl chains through Cu-N coordination bonds into a two-dimensional organic-inorganic hybrid network. The planar sheets are stacked along the c axis and associated through weak C-H center dot center dot center dot Cl inter-actions. The results show a reliable structural motif with controllable separation of the CuCl chains by variation of the length of the ligand.

Site-selective self-assembly of MPA-bridged CuHCF multilayers on APTMS-supported gold colloid electrodes

(3-Aminopropyl)trimethoxysilane (APTMS)-supported gold colloid electrode was constructed by virtue of a recently developed solution-based self-assembly strategy. The preparing procedure of 3-mercaptopropionic acid (MPA)-bridged copper hexacyanoferrate (CuHCF) multilayers on a planar macroelectrode (Bharathi et al. Langmuir 2001, 17, 7468) was copied to the as-prepared colloid electrode. The optical spectra, atomic force microscopy, and electrochemistry demonstrate successful copy of the multilayer system on a macroelectrode to the as-prepared colloid electrode. Remarkably, it was found that multilayer growth is highly selective to the nanoscale sites where gold nanoparticles are immobilized, and multilayer growth does not take place on the sites without nanoparticles. Interestingly, a preliminary electrochemical investigation indicates that electrochemical properties of multilayers systems on the colloid electrode are different from their counterparts on a planar macroelectrode, which might be due to high curvature effects of the gold nanoparticles. This indicates a different motif of multilayers on the colloid electrode from that on a planar macroelectrode.

Liposome-mediated conformation transition of DNA detected by molecular probe: methyl green

Recent studies have focused on the structural features of DNA-lipid assemblies. In this paper, we take methyl green (MG) as a probe molecule to detect the conformational change of DNA molecule induced by dimethyldioctadecylammonium bromide (DDAB) liposomes before the condensation process of DNA begins. DDAB-induced DNA topology changes were investigated by cyclic voltammetry (CV), circular dichroism (CD) and UV-VIS spectrometry. We find that upon binding to DNA, positively charged liposomes induce a conformational transition of DNA molecules from the native B-form to the C motif. Conformational transition in DNA results in the binding modes of MG to DNA, changing and being isolated from DNA to the solution. More stable complexes are formed between DNA and DDAB. That is also proved by the melting study of DNA.

Structure of coordination polymer, [Zn(bipy)(H2O)(3)SO4] center dot 2H(2)O (bipy=4,4 '-bipyridine)

The crystal of the title compound (C10H18N2O9SZn M-r=407.69) belongs to the hexagonal system, space group P 6(5) with cell parameters: a=11.411 (2), c=20.908(4) Angstrom, V=2357.7(7) Angstrom(3), Z=6, D-c=1.723g/cm(3), F(000)=1260, mu(MoKa)=1.743mm(-1). The final R and omega R factors are 0.072 and 0.178 respectively for 1335 observed reflections. in the structure, zinc ions are bridged by 4,4'-bipyridine to form infinite chains. The sheets containing parallel chains stack along a 65 screw axis to give a helical staircase motif. The helical structure is mainly controlled by the hydrogen bonds.

The structure of Aquifex aeolicus sulfide:quinone oxidoreductase, a basis to understand sulfide detoxification and respiration

Sulfide: quinone oxidoreductase (SQR) is a flavoprotein with homologues in all domains of life except plants. It plays a physiological role both in sulfide detoxification and in energy transduction. We isolated the protein from native membranes of the hyperthermophilic bacterium Aquifex aeolicus, and we determined its X-ray structure in the "as-purified,'' substrate-bound, and inhibitor-bound forms at resolutions of 2.3, 2.0, and 2.9 angstrom, respectively. The structure is composed of 2 Rossmann domains and 1 attachment domain, with an overall monomeric architecture typical of disulfide oxidoreductase flavoproteins. A. aeolicus SQR is a surprisingly trimeric, periplasmic integral monotopic membrane protein that inserts about 12 angstrom into the lipidic bilayer through an amphipathic helix-turn-helix tripodal motif. The quinone is located in a channel that extends from the si side of the FAD to the membrane. The quinone ring is sandwiched between the conserved amino acids Phe-385 and Ile-346, and it is possibly protonated upon reduction via Glu-318 and/or neighboring water molecules. Sulfide polymerization occurs on the re side of FAD, where the invariant Cys-156 and Cys-347 appear to be covalently bound to polysulfur fragments. The structure suggests that FAD is covalently linked to the polypeptide in an unusual way, via a disulfide bridge between the 8-methyl group and Cys-124. The applicability of this disulfide bridge for transferring electrons from sulfide to FAD, 2 mechanisms for sulfide polymerization and channeling of the substrate, S2-, and of the product, S-n, in and out of the active site are discussed.

Interaction between Thymidylate Synthase and Its Cognate mRNA in Zebrafish Embryos

Thymidylate synthase (TS), which catalyzes the de novo synthesis of dUMP, is an important target for cancer therapy. In this report, the effects of 5-fluorouracil (5-FU) and ZD1694 on the regulation of TS gene expression were evaluated in zebrafish embryos. Our results revealed that the expression of TS was increased by about six-fold when embryos were treated with 1.0 mu M 5-FU and there was a greater than 10-fold increase in the TS protein level after treatment with 0.4 mu M ZD1694. Northern blot analysis confirmed that expression of TS mRNA was identical in treated or untreated embryos. Gel shift and immunoprecipitation assays revealed that zebrafish TS was specifically bound with its cognate mRNA in vitro and in vivo. We identified a 20 nt RNA sequence, TS:N20, localized to the 5'-UTR of TS mRNA, which corresponded to nt 13-32; TS:N20 bound to the TS protein with an affinity similar to that of the full-length TS mRNA. The MFold program predicted that TS:N20 formed a stable stem-loop structure similar to that of the cis-acting element found in human TS mRNA. Variant RNAs with either a deletion or mutation in the core motif of TS:N20 were unable to bind to the TS protein. In vitro translation experiments, using the rabbit lysate system, confirmed that zebrafish TS mRNA translation was significantly repressed when an excess amount of TS protein was included in the system. Additionally, a TS stability experiment confirmed that treatment of zebrafish embryos with 5-FU could increase the TS stability significantly, and the half life of TS protein was about 2.7 times longer than in untreated embryos. Our study revealed a structural requirement for the interaction of TS RNA with TS protein. These findings also demonstrated that the increase in TS protein induced by 5-FU occurs at the post-transcriptional level and that increased stability and translation efficiency both contributed to the increase in TS protein levels induced by TS inhibitors.