Landscape of intelligent cores: An autonomic multi-agent approach for space application

Space applications are challenged by the reliability of parallel computing systems (FPGAs) employed in space crafts due to Single-Event Upsets. The work reported in this paper aims to achieve self-managing systems which are reliable for space applications by applying autonomic computing constructs to parallel computing systems. A novel technique, 'Swarm-Array Computing' inspired by swarm robotics, and built on the foundations of autonomic and parallel computing is proposed as a path to achieve autonomy. The constitution of swarm-array computing comprising for constituents, namely the computing system, the problem / task, the swarm and the landscape is considered. Three approaches that bind these constituents together are proposed. The feasibility of one among the three proposed approaches is validated on the SeSAm multi-agent simulator and landscapes representing the computing space and problem are generated using the MATLAB.

Intelligent cores and intelligent agents: two approaches to achieve autonomy in swarm-array computing

How can a bridge be built between autonomic computing approaches and parallel computing systems? How can autonomic computing approaches be extended towards building reliable systems? How can existing technologies be merged to provide a solution for self-managing systems? The work reported in this paper aims to answer these questions by proposing Swarm-Array Computing, a novel technique inspired from swarm robotics and built on the foundations of autonomic and parallel computing paradigms. Two approaches based on intelligent cores and intelligent agents are proposed to achieve autonomy in parallel computing systems. The feasibility of the proposed approaches is validated on a multi-agent simulator.

Implementing intelligent cores using processor virtualization for fault tolerance

Processor virtualization for process migration in distributed parallel computing systems has formed a significant component of research on load balancing. In contrast, the potential of processor virtualization for fault tolerance has been addressed minimally. The work reported in this paper is motivated towards extending concepts of processor virtualization towards ‘intelligent cores’ as a means to achieve fault tolerance in distributed parallel computing systems. Intelligent cores are an abstraction of the hardware processing cores, with the incorporation of cognitive capabilities, on which parallel tasks can be executed and migrated. When a processing core executing a task is predicted to fail the task being executed is proactively transferred onto another core. A parallel reduction algorithm incorporating concepts of intelligent cores is implemented on a computer cluster using Adaptive MPI and Charm ++. Preliminary results confirm the feasibility of the approach.

Identificação de motivos relevantes para a função do fator de iniciação da tradução EIF4E3 de Leishmania sp

Os tripanossomatídeos são organismos caracterizados pelo controle póstranscricional da expressão gênica, principalmente em nível de tradução. Na tradução em eucariotos, tem grande destaque o complexo eIF4F, sendo um de seus principais componentes o fator de iniciação da tradução eIF4E. Já foram descritos em tripanossomatídeos seis homólogos para o eIF4E, nomeados EIF4E1 a 6. Em um estudo com Leishmania amazonensis, focado no EIF4E3, percebeu-se que seu perfil de expressão se alterava rapidamente numa curva de crescimento, com este apresentando ao menos duas bandas. As mudanças observadas sugeriam modificações pós-traducionais do tipo fosforilação, algo posteriormente confirmado. Analisando-se a sequência do EIF4E3 de Leishmania, foi possível identificar a presença de possíveis sítios de fosforilação e de ligação a parceiros funcionais como homólogos do eIF4G, outro componente do complexo eIF4F, e da proteína de ligação á cauda poli-A (PABP). No presente estudo foi analisado o perfil de expressão e a capacidade de ligação a parceiros funcionais do EIF4E3 de Leishmania superexpresso em células transfectadas e no qual foram introduzidas mutações em motivos específicos. Os resultados mostraram um perfil de expressão de ao menos três bandas para o EIF4E3 de L. amazonensis e duas para L. infantum, com o sítio S75, presente apenas na primeira, sendo o responsável por esta diferença. Em ensaios de imunoprecipitação, foi identificado um motivo que, quando mutado, aboliu a ligação do EIF4E3 com a PABP3, sugerindo este como o sítio de interação entre os fatores. Com a análise do efeito de mutações no EIF4E3 de L. amazonensis, foi percebido que ao se mutar três motivos implicados na à PABP e o possível sítio de ligação ao EIF4G, sua fosforilação diminuiu drasticamente, sugerindo a necessidade destas interações para que a fosforilação ocorra. Estes resultados indicam um complexo mecanismo de modificações pós-traducionais responsáveis pela regulação do EIF4E3 e contribuem a para a caracterização da sua função em Leishmania

Fine-root turnover rates of European forests revisited: an analysis of data from sequential coring and ingrowth cores

Background and Aims Forest trees directly contribute to carbon cycling in forest soils through the turnover of their fine roots. In this study we aimed to calculate root turnover rates of common European forest tree species and to compare them with most frequently published values. Methods We compiled available European data and applied various turnover rate calculation methods to the resulting database. We used Decision Matrix and Maximum-Minimum formula as suggested in the literature. Results Mean turnover rates obtained by the combination of sequential coring and Decision Matrix were 0.86 yr−1 for Fagus sylvatica and 0.88 yr−1 for Picea abies when maximum biomass data were used for the calculation, and 1.11 yr−1 for both species when mean biomass data were used. Using mean biomass rather than maximum resulted in about 30 % higher values of root turnover. Using the Decision Matrix to calculate turnover rate doubled the rates when compared to the Maximum-Minimum formula. The Decision Matrix, however, makes use of more input information than the Maximum-Minimum formula. Conclusions We propose that calculations using the Decision Matrix with mean biomass give the most reliable estimates of root turnover rates in European forests and should preferentially be used in models and C reporting.

Dust sources and deposition during the last glacial maximum and current climate: a comparison of model results with paleodata from ice cores and marine sediments

Mineral dust aerosols in the atmosphere have the potential to affect the global climate by influencing the radiative balance of the atmosphere and the supply of micronutrients to the ocean. Ice and marine sediment cores indicate that dust deposition from the atmosphere was at some locations 2–20 times greater during glacial periods, raising the possibility that mineral aerosols might have contributed to climate change on glacial-interglacial time scales. To address this question, we have used linked terrestrial biosphere, dust source, and atmospheric transport models to simulate the dust cycle in the atmosphere for current and last glacial maximum (LGM) climates. We obtain a 2.5-fold higher dust loading in the entire atmosphere and a twenty-fold higher loading in high latitudes, in LGM relative to present. Comparisons to a compilation of atmospheric dust deposition flux estimates for LGM and present in marine sediment and ice cores show that the simulated flux ratios are broadly in agreement with observations; differences suggest where further improvements in the simple dust model could be made. The simulated increase in high-latitude dustiness depends on the expansion of unvegetated areas, especially in the high latitudes and in central Asia, caused by a combination of increased aridity and low atmospheric [CO2]. The existence of these dust source areas at the LGM is supported by pollen data and loess distribution in the northern continents. These results point to a role for vegetation feedbacks, including climate effects and physiological effects of low [CO2], in modulating the atmospheric distribution of dust.

Tensile bond strength of cast commercially pure titanium and cast gold-alloy posts and cores cemented with two luting agents

Statement of problem. In vitro studies on the retentive strengths of various cements used to retain posts have reported conflicting results. Purpose. The purpose of this study was to compare the tensile strength of commercially pure titanium and type III cast gold-alloy posts and cores cemented with zinc phosphate or resin cement. Material and methods. Forty-two extracted human canines were endoclontically treated. The root preparations were accomplished using Largo reamers (10 mm in depth and 1.7 mm in diameter). Acrylic resin patterns for the posts and cores were made, and specimens were cast in commercially pure titanium and in type III gold alloy (n=7). Fourteen titanium cast posts and cores were submitted to surface treatment with Kroll acid solution and to scanning electron microscopy (SEM), before and after acid etching. The groups (n=7) were cemented with zinc phosphate cement or resin cement (Panavia F). Tensile strengths were measured in a universal testing machine at a crosshead speed of 0.5 mm/min. The results (Kgf) were statistically analyzed by 2-way ANCIVA (alpha=.05). Results. The 2-way ANOVA indicated that there were no significant differences among the groups tested. Retentive means for zinc phosphate and Panavia F cements were statistically similar. The bond strength was not Influenced by the alloy, the luting material, or the etching treatment. SEM analysis indicated that the etched surfaces were smoother than those that did not receive surface treatment, but this fact did not influence the results. Conclusions. Commercially pure titanium cast posts and cores cemented with zinc phosphate and resin cements demonstrated similar mean tensile retentive values. Retentive values were also similar to mean values recorded for cast gold-alloy posts and cores cemented with zinc phosphate cement and resin cements.

Characterization of organic matter in sediment cores of the Todos os Santos Bay, Bahia, Brazil, by elemental analysis and (13)C NMR

The impact of human activity on the sediments of Todos os Santos Bay in Brazil was evaluated by elemental analysis and (13)C Nuclear Magnetic Resonance ((13)C NMR). This article reports a study of six sediment cores collected at different depths and regions of Todos os Santos Bay. The elemental profiles of cores collected on the eastern side of Frades Island suggest an abrupt change in the sedimentation regime. Auto-regressive Integrated Moving Average (ARIMA) analysis corroborates this result. The range of depths of the cores corresponds to about 50 years ago, coinciding with the implantation of major onshore industrial projects in the region. Principal Component Analysis of the (13)C NMR spectra clearly differentiates sediment samples closer to the Subae estuary, which have high contents of terrestrial organic matter, from those closer to a local oil refinery. The results presented in this article illustrate several important aspects of environmental impact of human activity on this bay. (C) 2011 Elsevier Ltd. All rights reserved.

Identificação da estratégia competitiva em redes de organizações no setor de autopeças brasileiro

Dissertação apresentada ao Programa de Mestrado em Administração da Universidade Municipal de São Caetano do Sul - USCS

Identificação dos riscos que levam a infecção do cateter venoso central sob a ótica do enfermeiro durante a assistência de enfermagem

O presente trabalho foi desenvolvido por meio de uma pesquisa quantitativa, com a técnica exploratória descritiva simples, usando um questionário com perguntas objetivas, para identificar os riscos que levam a infecção do cateter venoso central, pela equipe de enfermagem, durante sua assistência, sob a ótica do enfermeiro, em uma instituição pública de médio porte na região do ABC. Participaram dessa pesquisa 15 enfermeiros e 53,3% deles informaram ser frequente a incidência de infecção no cateter venoso central e esses assinalaram que essa ocorrência envolve falta técnicas assépticas. 93,3% dos participantes apontaram a realização da troca diária do curativo da inserção do cateter venoso central. A questão da desinfecção do cateter venoso central com algodão ou gaze embebida em álcool 70% previamente a administração de medicações, observou-se que 53,3% assinalaram negativamente e 26,7% que é realizada às vezes. 26,7% responderam que não é realizada nenhuma de proteção durante o banho no cateter e 40% que é feita às vezes. 100% consideram importante o protocolo de troca de curativo do cateter venoso central para redução do índice de infecção relacionado ao cateter venoso central. Concluiu-se, portanto, que há reconhecimento da incidência de infecção decorrente da manipulação do cateter venoso central, tendo como fatores de risco a falta de assepsia, a forma incorreta do curativo e falta de protocolo nos cuidados com o cateter.

Identificação das dimensões mais importantes utilizadas para avaliação dos membros de redes colaborativas: um estudo das redes no setor de eventos do Grande ABC

Dissertação apresentada ao Programa de Pós-Graduação em Administração da Universidade Municipal de São Caetano do Sul como requisito para a obtenção do título de Mestre em Administração

A atuação de administradores de empresas em orgãos públicos: a identificação organizacional face a uma formação voltada a negócios

Dissertação apresentada ao Programa de Pós-graduação em Administração – Mestrado como requisito para a obtenção do título de Mestre em Administração