Human breast cancer cell metastasis to long bone and soft organs of nude mice : a quantitative assay

Bone is a common metastatic site in human breast cancer (HBC). Since bone metastasis occurs very rarely from current spontaneous or experimental metastasis models of HBC cells in nude mice, an arterial seeding model involving the direct injection of the cells into the left ventricle has been developed to better understand the mechanisms involved in this process. We present here a sensitive polymerase chain reaction (PCR) method to detect and quantitate bone and soft organ metastasis in nude mice which have been intracardially inoculated with Lac Z transduced HBC cells. Amplification of genomically incorporated Lac Z sequences in MDA-MB-231-BAG HBC cells enables us to specifically detect these cells in mouse organs and bones. We have also created a competitive template to use as an internal standard in the PCR reactions, allowing us to better quantitate levels of HBC metastasis. The results of this PCR detection method correlate well with cell culture detection from alternate long bones from the same mice, and are more sensitive than gross Lac Z staining with X-gal or routine histology. Comparable qualitative results were obtained with PCR and culture in a titration experiment in which mice were inoculated with increasing numbers of cells, but PCR is more quantifiable, less time consuming, and less expensive. This assay can be employed to study the molecular and cellular aspects of bone metastasis, and could easily be used in conjunction with RT-PCR-based analyses of gene products which may be involved with HBC metastasis.

Randomized trial of a clinic-based, community-supported, lifestyle intervention to improve physical activity and diet : The North Carolina enhanced WISEWOMAN project

Objective To determine if a clinic-based behavioral intervention program for low-income mid-life women that emphasizes use of community resources will increase moderate intensity physical activity (PA) and improve dietary intake. Methods Randomized trial conducted from May 2003 to December 2004 at one community health center in Wilmington, NC. A total of 236 women, ages 40–64, were randomized to receive an Enhanced Intervention (EI) or Minimal Intervention (MI). The EI consisted of an intensive phase (6 months) including 2 individual counseling sessions, 3 group sessions, and 3 phone calls from a peer counselor followed by a maintenance phase (6 months) including 1 individual counseling session and 7 monthly peer counselor calls. Both phases included efforts to increase participants' use of community resources that promote positive lifestyle change. The MI consisted of a one-time mailing of pamphlets on diet and PA. Outcomes, measured at 6 and 12 months, included the comparison of moderate intensity PA between study groups as assessed by accelerometer (primary outcome) and questionnaire, and dietary intake assessed by questionnaire and serum carotenoids (6 months only). Results For accelerometer outcomes, follow-up was 75% at 6 months and 73% at 12 months. Though moderate intensity PA increased in the EI and decreased in the MI, the difference between groups was not statistically significant (p = 0.45; multivariate model, p = 0.08); however, moderate intensity PA assessed by questionnaire (92% follow-up at 6 months and 75% at 12 months) was greater in the EI (p = 0.01; multivariate model, p = 0.001). For dietary outcomes, follow-up was 90% for questionnaire and 92% for serum carotenoids at 6 months and 74% for questionnaire at 12 months. Dietary intake improved more in the EI compared to the MI (questionnaire at 6 and 12 months, p < 0.001; serum carotenoid index, p = 0.05; multivariate model, p = 0.03). Conclusion The EI did not improve objectively measured PA, but was associated with improved self-reported and objective measures of dietary intake.

Embedded creatives in the Australian manufacturing industry

According to 2011 Australian Census figures, embedded creative employees (creative employees not working in the core Creative Industries) make up 2 per cent (or a total of 17 635) of manufacturing industry employees. The average for all industries is 1.6 per cent. In the 2011–2012 financial year the manufacturing industry formed 7.3 per cent of Australia’s gross domestic product (GDP), contributing approximately AU$106.5 billion to the economy (Department of Industry, Innovation, Science, Research and Tertiary Education 2013). Manufacturing is central to innovation, accounting for over one-quarter of all business expenditure in R&D in 2010–2011, representing around AU$4.8 billion invested in R&D (ibid.). Facing challenges such as sustainability concerns, ever-increasing offshore production and the global financial crisis, the Australian manufacturing industry needs to remain relevant and competitive to succeed. Innovation is one way to do this. Given the contribution of the manufacturing industry to the Australian economy, and the above-average portion of embedded creatives in manufacturing, it is important to consider what exactly embedded creatives add to the industry. This chapter, inspired by the Getting Creative in Healthcare report (Pagan, Higgs and Cunningham 2008), examines the contribution of embedded creatives to innovation in the manufacturing industry via case studies and supplemental data.

Benthic metabolism as an indicator of stream ecosystem health

We tested direct and indirect measures of benthic metabolism as indicators of stream ecosystem health across a known agricultural land-use disturbance gradient in southeast Queensland, Australia. Gross primary production (GPP) and respiration (R24) in benthic chambers in cobble and sediment habitats, algal biomass (as chlorophyll a) from cobbles and sediment cores, algal biomass accrual on artificial substrates and stable carbon isotope ratios of aquatic plants and benthic sediments were measured at 53 stream sites, ranging from undisturbed subtropical rainforest to catchments where improved pasture and intensive cropping are major land-uses. Rates of benthic GPP and R24 varied by more than two orders of magnitude across the study gradient. Generalised linear regression modelling explained 80% or more of the variation in these two indicators when sediment and cobble substrate dominated sites were considered separately, and both catchment and reach scale descriptors of the disturbance gradient were important in explaining this variation. Model fits were poor for net daily benthic metabolism (NDM) and production to respiration ratio (P/R). Algal biomass accrual on artificial substrate and stable carbon isotope ratios of aquatic plants and benthic sediment were the best of the indirect indicators, with regression model R2 values of 50% or greater. Model fits were poor for algal biomass on natural substrates for cobble sites and all sites. None of these indirect measures of benthic metabolism was a good surrogate for measured GPP. Direct measures of benthic metabolism, GPP and R24, and several indirect measures were good indicators of stream ecosystem health and are recommended in assessing process-related responses to riparian and catchment land use change and the success of ecosystem rehabilitation actions.

Managing Ethical Dilemmas

This chapter reviews almost a decade of research and writing undertaken by the authors into ethical dilemmas faced by leaders in a number of different operational contexts, including schools, universities and the public sector. The importance of this body of work is emphasised by one of our research participants who argued that ethical dilemmas were the 'bread and butter' of what leaders do. The chapter comprises four main sections. The first section overviews key theoretical aspects as background to the chapter, including relevant discussions about ethics and ethical decision-making. The second section synthesises the research findings from our work in the three contexts noted above, drawing out a set of learnings that contribute to better understandings of the nature, complexities and challenges of ethical dilemmas. This section is followed by a discussion of an explanatory conceptual model of ethical dilemmas that was developed initially from the literature and confirmed by our research. The model reminds us of some of the critical issues at play in ethical dilemmas, and some of the consequences and implications for organisational culture building they can generate. By way of a short scenario, the final section provides a theory-to-practice illustration of an ethical dilemma in action. A set of recommendations, drawn from the ideas of school leaders who have worked with this and similar dilemmas, is offered as a way forward to better understanding and resolution of such dilemmas so prevalent in our schools today.

Economic development and construction productivity in Malaysia

The productivity of the construction industry has a significant effect on national economic growth. Gains from higher construction productivity flow through the economy, as all industries rely on construction to some extent as part of their business investment. Contractions and expansions of economic activity are common phenomena in an economy. Three construction cycles occurred between the years 1970 and 2011 in Malaysia. The relationships between construction productivity and economic development are examined by the partial correlation method to establish the underlying factors driving the change in construction productivity. Construction productivity is statistically significantly correlated with gross domestic product (GDP) per capita in a positive direction for the 1985–98 and 1998–2009 cycles, but not the 1970–85 cycle. Fluctuations in construction activities and the influx of foreign workers underlie the changes of construction productivity in the 1985–98 cycle. There was less fluctuation in construction activities in the 1998–2009 cycle, with changes being mainly due to the fiscal stimulation policies of the government in attempting to stabilize the economy. The intensive construction of mega-projects resulted in resource constraints and cost pressures during the 1980s and 1990s. A better management of the ‘boom-bust’ nature of the construction business cycle is required to maintain the capability and capacity of the industry.

The relationship between N2O, NO, and N2 fluxes from fertilized and irrigated dryland soils of the Aral Sea Basin, Uzbekistan

Microbial respiratory reduction of nitrous oxide (N2O) to dinitrogen (N2) via denitrification plays a key role within the global N-cycle since it is the most important process for converting reactive nitrogen back into inert molecular N2. However, due to methodological constraints, we still lack a comprehensive, quantitative understanding of denitrification rates and controlling factors across various ecosystems. We investigated N2, N2O and NO emissions from irrigated cotton fields within the Aral Sera Basin using the He/O2 atmosphere gas flow soil core technique and an incubation assay. NH4NO3 fertilizer, equivalent to 75 kg ha−1 and irrigation water, adjusting the water holding capacity to 70, 100 and 130% were applied to the incubation vessels to assess its influence on gaseous N emissions. Under soil conditions as they are naturally found after concomitant irrigation and fertilization, denitrification was the dominant process and N2 the main end product of denitrification. The mean ratios of N2/N2O emissions increased with increasing soil moisture content. N2 emissions exceeded N2O emissions by a factor of 5 ± 2 at 70% soil water holding capacity (WHC) and a factor of 55 ± 27 at 130% WHC. The mean ratios of N2O/NO emissions varied between 1.5 ± 0.4 (70% WHC) and 644 ± 108 (130% WHC). The magnitude of N2 emissions for irrigated cotton was estimated to be in the range of 24 ± 9 to 175 ± 65 kg-N ha−1season−1, while emissions of NO were only of minor importance (between 0.1 to 0.7 kg-N ha−1 season−1). The findings demonstrate that for irrigated dryland soils in the Aral Sera Basin, denitrification is a major pathway of N-loss and that substantial amounts of N-fertilizer are lost as N2 to the atmosphere for irrigated dryland soils.

Water-based nanoparticulate solar cells using a diketopyrrolopyrrole donor polymer

Organic photovoltaic devices with either bulk heterojunction (BHJ) or nanoparticulate (NP) active layers have been prepared from a 1:2 blend of (poly{3,6-dithiophene-2-yl-2,5-di(2-octyldodecyl)-pyrrolo[3,4-c]pyrrole-1, 4-dione-alt-naphthalene}) (PDPP-TNT) and the fullerene acceptor, ([6,6]-phenyl C71-butyric acid methyl ester) (PC70BM). Atomic force microscopy (AFM) and scanning electron microscopy (SEM) have been used to investigate the morphology of the active layers of the two approaches. Mild thermal treatment of the NP film is required to promote initial joining of the NPs in order for the devices to function, however the NP structure is retained. Consequently, whereas gross phase segregation of the active layer occurs in the BHJ device spin cast from chloroform, the nanoparticulate approach retains control of the material domain sizes on the length scale of exciton diffusion in the materials. As a result, NP devices are found to generate more than twice the current density of BHJ devices and have a substantially greater overall efficiency. The use of aqueous nanoparticulate dispersions offers a promising approach to control the donor acceptor morphology on the nanoscale with the benefit of environmentally- friendly, solution-based fabrication. © 2014 the Owner Societies.

User-led innovation in call center knowledge work

So called “knowledge work” is seen as integral to post-industrial society and, for some, information and communications technologies (ICTs) are critical enablers of the associated practices. Many still propose the technologically deterministic route of rolling out ICTs and expecting that users will, and indeed can, “download” what they know into a system that can then be used in a number of ways. This approach is usually underpinned by the predominant assumption that the system will be developed by one group (developers) and used by another group (users). In this paper, we report on an exploratory case study of the enactment of ICT supported knowledge work in a human resources contact center which illustrates the negotiable boundary between the developer and user in local level innovation processes. Drawing upon ideas from the social shaping of technology, we examine how discussions regarding producer-user relations in innovation processes require a degree of greater sophistication as we show how users often develop (or produce) technologies and work practices in situ—in this case, to enable knowledge work practices and contribute to the project of constructing the knowledge component of professional identity. Much has been made of contextualizing the user; further work is required to contextualize the developer as a user and understand the social actors in ICT innovation environments who straddle both domains

UNICEF, Jakarta, Indonesia : Review of Satap Schools

A. Background and context 1. Education, particularly basic education (grades1-9), has been considered critical to promoting national economic growth and social well being1. Three factors that con-tribute to the above are: (i) Education increases human capital inherent in a labor force and thus increases productivity. It also increases capacity for working with others and builds community consensus to support national development. (ii) Education can in-crease the innovative capacity of a community to support social and economic growth—use of new technologies, products and services to promote growth and wellbeing. (iii) Education can facilitate knowledge transfer needed to understand the social and eco-nomic innovations and new processes, practices and values. Cognizant of the above benefits of education, the Millennium Development Goals (MDG) and the Education for All (EFA) declarations advocating universal basic education were formulated and ratified by UN member countries. 2. Achieving universal primary education (grade 6) may not be sufficient to maxim-ize the above noted socio-economic and cultural benefits. There is general consensus that basic literacy and numeracy up to grade 9 are essential foundational blocks for any good education system to support national development. Basic Education provides an educational achievement threshold that ensures the learning is retained. To achieve this, the donor partner led interventions and the UN declarations such as the MDG goals have sought universal access to basic education (grades 1-9). As many countries progress towards achieving the universal access targets, recent research evidence suggests that we need more than just access to basic education to impact on the na-tional development. Measuring basic education completion cycle, gross enrolment rate (GER) and participation rate etc., has to now include a focus on quality and relevance of the education2. 3. While the above research finding is generally accepted by the Government of In-donesia (GoI), unlike many other developing countries, Indonesia is geographically and linguistically complex and has the fourth largest education sector in the world. It has over 3000 islands, 17,000 ethnic groups and it takes as long as 7 hours to travel from east to west of the country and has multiple time differences. The education system has six years of primary education (grades 1-6), 3 years of junior secondary education (grades 7-9) and three years of senior secondary education (grades 10-12). Therefore, applying the findings of the above cited research in a country like Indonesia is a chal-lenge. Nevertheless, since the adoption of the National Education Law (2003)3 the GoI has made significant progress in improving access to and quality of basic education (grades 1-9). The 2011/12 national education statistics show the primary education (grades 1-6) completion rate was 99.3%, the net enrolment rate (NER) was 95.4% and the GER was 115.4%. This is a significant achievement considering the complexities faced within Indonesia. This increase in the primary education sub-sector, however, has not flowed onto the Junior Secondary School (JSS) education. The transition from pri-mary to JSS is still short of the GoI targets. In 2012, there were 146,826 primary schools feeding into 33,668 junior secondary schools. The transition rate from primary to secondary in 2011/12 was 78%. When considering district or sub-district level data the transition in poor districts could be less than the aggregated national rate. Poverty and lack of parents’ education, confounded by opportunity cost, are major obstacles to transitioning to JSS4. 4. Table 1 presents a summary of GoI initiatives to accelerate the transition to JSS. GoI, with assistance from the donor community, has built 2465 new regular JSS, mak-ing the total number of regular JSS 33,668. In addition, 57,825 new classrooms have been added to existing regular JSS. Also, in rural and remote areas 4136 Satu-Atap5 (SATAP) schools were built to increase access to JSS. These SATAP schools are the focus of this study as they provide education opportunities to the most marginalized, ru-ral, remote children who otherwise would not have access to JSS and consequently not complete basic education.

Experimental colonization of the canine urinary tract with the asymptomatic bacteriuria Escherichia coli strain 83972

Establishment of asymptomatic bacteriuria (ABU) with Escherichia coli 83972 is a viable prophylactic alternative to antibiotic therapy for the prevention of recurrent bacterial urinary tract infection in humans. Approximately 2 x 108 viable E. coli 83972 cells were introduced into the bladder of six healthy female dogs via a sterile urinary catheter. The presence of pyuria, depression, stranguria, pollakiuria and haematuria was documented for 6 weeks and urinalysis and aerobic bacterial cultures were performed every 24–72 h. Pyuria was present in all dogs on day 1 post-inoculation and 4/6 dogs (67%) had a positive urine culture on this day. Duration of colonization ranged from 0 to 10 days (median 4 days). Four dogs were re-inoculated on day 20. Duration of colonization following the second inoculation ranged from 1 to 3 days. No dog suffered pyrexia or appeared systemically unwell but all dogs initially exhibited mild pollakiuria and a small number displayed gross haematuria and/or stranguria. By day 3 of each trial all clinical signs had resolved. Persistent bacteriuria was not achieved in any dog but two dogs were colonized for 10 days following a single inoculation. Further research is required to determine whether establishment of ABU in dogs with recurrent urinary tract infection is a viable alternative to repeated doses of antimicrobial agents.

Creative occupations as knowledge practices : innovation and precarity in the creative economy

The ARC Centre of Excellence in Creative Industries and Innovation (herewith CCI) was established with two simple policy objectives. One was to assess anecdotal and boosterish claims about the growth rates of the creative industries, and hence, to measure the size of the creative industries contribution to gross domestic product (GDP). The other was to ascertain the contribution of the creative industries to employment. Preliminary research detailed in Cunningham and Higgs (2009) showed that the existing industrial classifications did not incorporate the terminology of the creative industries, nor did they disaggregate new categories of digital work such as video games. However, we discovered that occupational codes provide a much more fine-grained account of work that would enable us to disaggregate and track economic activity that corresponded to creative industries terminology. Thus was born one major centrepiece of CCI research – the tracking of national occupational codes in pursuit of measuring creative industries policy outcomes. This paper commences with some description of empirical work that investigates creative occupations; however, the real point is to suggest that this type of detailed, occupation-based empirical work has important theoretical potential that has not yet been fully expended (though see Cunningham 2013; Hearn and Bridgstock 2014; Bakhshi, Freeman and Higgs 2013; Hartley and Potts 2014).

Analysis of resource efficiency : a production frontier approach

This article integrates the material/energy flow analysis into a production frontier framework to quantify resource efficiency (RE). The emergy content of natural resources instead of their mass content is used to construct aggregate inputs. Using the production frontier approach, aggregate inputs will be optimised relative to given output quantities to derive RE measures. This framework is superior to existing RE indicators currently used in the literature. Using the exergy/emergy content in constructing aggregate material or energy flows overcomes a criticism that mass content cannot be used to capture different quality of differing types of resources. Derived RE measures are both ‘qualitative’ and ‘quantitative’, whereas existing RE indicators are only qualitative. An empirical examination into the RE of 116 economies was undertaken to illustrate the practical applicability of the new framework. The results showed that economies, on average, could reduce the consumption of resources by more than 30% without any reduction in per capita gross domestic product (GDP). This calculation occurred after adjustments for differences in the purchasing power of national currencies. The existence of high variations in RE across economies was found to be positively correlated with participation of people in labour force, population density, urbanisation, and GDP growth over the past five years. The results also showed that economies of a higher income group achieved higher RE, and those economies that are more dependent on imports and primary industries would have lower RE performance.

Work health and safety and the criminal law in Australia

This paper analyses recent Australian debates about the use of the criminal law in work health and safety regulation. It argues that these debates have to be seen in the context of the historical development of work health and safety regulation in the United Kingdom and Australia. The first part of the paper shows that, since the late 19th century, contraventions against the Australian work health and safety statutes have not been regarded as 'really criminal', and have largely been addressed by informal measures and, since the 1980s, by administrative sanctions. When prosecutions have taken place, work health and safety issues have been individualised and decontextualised, so that defendants have been able to reduce their culpability in the eyes of the court. Significant legal barriers have undermined the use of the crime of gross negligence manslaughter against corporations and individuals. The second part of the paper analyses recent debates about restructuring gross negligence manslaughter and bolstering the 'criminality' of offences under the work health and safety statutes. It argues that the latter debate has been constrained by the historical forces examined in the first part of the paper, and that the current position, embodied in the recently harmonised Work Health and Safety Acts, favours attempting to recriminalise the work health and safety legislation. The debate about reforming gross negligence manslaughter has stalled.

Coordination and plasticity in leaf anatomical traits of invasive and native vine species

Premise of the study: Plant invasiveness can be promoted by higher values of adaptive traits (e.g., photosynthetic capacity, biomass accumulation), greater plasticity and coordination of these traits, and by higher and positive relative influence of these functionalities on fitness, such as increasing reproductive output. However, the dataset for this premise rarely include linkages between epidermal-stomatal traits, leaf internal anatomy, and physiological performance. Methods: Three ecological pairs of invasive vs non-invasive (native) woody vine species of South-East Queensland, Australia were investigated for trait differences in leaf morphology and anatomy under varying light intensity. The linkages of these traits with physiological performance (e.g. water use efficiency, photosynthesis, and leaf construction cost) and plant adaptive traits of specific leaf area, biomass, and relative growth rates were also explored. Key results: Mean leaf anatomical trait differed significantly between the two groups, except for stomatal size. Plasticity of traits, and to a very limited extent, their phenotypic integration were higher in the invasive relative to the native species. ANOVA, ordination, and analysis of similarity suggest that for leaf morphology and anatomy, the three functional strategies contribute to the differences between the two groups in the order phenotypic plasticity > trait means > phenotypic integration. Conclusions: The linkages demonstrated in the study between stomatal complex/gross anatomy and physiology are scarce in the ecological literature of plant invasiveness, but the findings suggest that leaf anatomical traits need to be considered routinely as part of weed species assessment and in the worldwide leaf economic spectrum.