Influence apart from Adoption: How Interaction between Programming and Scientific Practices Shapes Modes of Inquiry in Four Oceanography Teams

Thesis (Ph.D.)--University of Washington, 2016-06

Passion and psychological adjustment: A test of the person-environment fit hypothesis

Passion represents a strong inclination toward an activity that is important, liked, and in which significant time is invested. Although a harmonious passion is well integrated in one’s identity and is emitted willingly, obsessive passion is not well integrated and is emitted out of internal pressure. This study tested for the presence of a Passion × Environment fit interaction with respect to psychological adjustment. Elite hockey players (N = 233) who tried out for a team in a highly competitive league participated in this short-term longitudinal study. As hypothesized, being selected by the highly competitive leagues led to higher psychological adjustment than not being selected by such leagues. Two months later, an interaction revealed that among athletes who were playing in highly competitive leagues, obsessively passionate athletes reported higher psychological adjustment than did harmonious athletes. Conversely, among athletes playing in less competitive leagues, harmonious athletes reported higher psychological adjustment than did obsessive athletes.

Swash-aquifer interaction in the vicinity of the water table exit point on a sandy beach

The coupling of sandy beach aquifers with the swash zone in the vicinity of the water table exit point is investigated through simultaneous measurements of the instantaneous shoreline (swash front) location, pore pressures and the water table exit point. The field observations reveal new insights into swash-aquifer coupling not previously gleaned from measurements of pore pressure only. In particular, for the case where the exit point is seaward of the observation point, the pore pressure response is correlated with the distance between the exit point and the shoreline in that when the distance is large the rate of pressure drop is fast and when the distance is small the rate decreases. The observations expose limitations in a simple model describing exit point dynamics which is based only on the force balance on a particle of water at the sand surface and neglects subsurface pressures. A new modified form of the model is shown to significantly improve the model-data comparison through a parameterization of the effects of capillarity into the aquifer storage coefficient. The model enables sufficiently accurate predictions of the exit point to determine when the swash uprush propagates over a saturated or a partially saturated sand surface, potentially an important factor in the morphological evolution of the beach face. Observations of the shoreward propagation of the swash-induced pore pressure waves ahead of the runup limit shows that the magnitude of the pressure fluctuation decays exponentially and that there is a linear increase in time lags, behavior similar to that of tidally induced water table waves. The location of the exit point and the intermittency of wave runup events is also shown to be significant in terms of the shore-normal energy distribution. Seaward of the mean exit point location, peak energies are small because of the saturated sand surface within the seepage face acting as a "rigid lid'' and limiting pressure fluctuations. Landward of the mean exit point the peak energies grow before decreasing landward of the maximum shoreline position.

Interaction of psychosocial risk factors explain increased neck problems among female office workers

This study investigated the relationship between psychosocial risk factors and (1) neck symptoms and (2) neck pain and disability as measured by the neck disability index (NDI). Female office workers employed in local private and public organizations were invited to participate, with 333 completing a questionnaire. Data were collected on various risk factors including age, negative affectivity, history of previous neck trauma, physical work environment, and task demands. Sixty-one percent of the sample reported neck symptoms lasting greater than 8 days in the last 12 months. The mean NDI of the sample was 15.5 out of 100, indicating mild neck pain and disability. In a hierarchical multivariate logistic regression, low supervisor support was the only psychosocial risk factor identified with the presence of neck symptoms. Similarly, low supervisor support was the only factor associated with the score on the NDI. These associations remained after adjustment for potential confounders of age, negative affectivity, and physical risk factors. The interaction of job demands, decision authority, and supervisor support was significantly associated with the NDI in the final model and this association increased when those with previous trauma were excluded. Interestingly, and somewhat contrary to initial expectations, as job demands increased, high decision authority had an increasing effect on the NDI when supervisor support was low. Crown copyright (c) 2006 Published by Elsevier B.V. All rights reserved.

Observations in a maternity ward: Usability considerations for EHRs in an interrupt driven environment

With the increasing demand on healthcare systems it is imperative that all care is provided as efficiently and effectively as possible. Technology within the medical domain offers an exciting opportunity to augment work practices in order to meet these needs. This research project explores the implications of the interrupt-driven nature of work in clinical situations on documentation within an environment that increasingly involves electronic health records (EHRs). Midwives in a busy maternity ward were observed and interviewed about the work practices they employed to document information associated with patient care. The results showed that the interrupt-driven nature of the workplace, a feature common to many healthcare settings, led to a tension between the work and the work to document the work. Further, the IT environment in which the information was collected was not designed to cater for frequent interruption of the data entry process. Several recommendations for improving the IT environment are proposed to support health professionals in documenting patient data whilst attending to the interruptions. The recommendations include timeout screens, push technology, use of handheld PDAs, and cues to augment documentation in an interrupted session. Copyright © 2008 RMIT Publishing

Meaningful Interaction in Virtual Learning Environments

There is still a great deal of opportunity for research on contextual interactive immersion in virtual heritage environments. The general failure of virtual environment technology to create engaging and educational experiences may be attributable not just to deficiencies in technology or in visual fidelity, but also to a lack of contextual and performative-based interaction, such as that found in games. However, there is little written so far on exactly how game-style interaction can help improve virtual learning environments.

A design environment for deadlock-free concurrent software

Using current software engineering technology, the robustness required for safety critical software is not assurable. However, different approaches are possible which can help to assure software robustness to some extent. For achieving high reliability software, methods should be adopted which avoid introducing faults (fault avoidance); then testing should be carried out to identify any faults which persist (error removal). Finally, techniques should be used which allow any undetected faults to be tolerated (fault tolerance). The verification of correctness in system design specification and performance analysis of the model, are the basic issues in concurrent systems. In this context, modeling distributed concurrent software is one of the most important activities in the software life cycle, and communication analysis is a primary consideration to achieve reliability and safety. By and large fault avoidance requires human analysis which is error prone; by reducing human involvement in the tedious aspect of modelling and analysis of the software it is hoped that fewer faults will persist into its implementation in the real-time environment. The Occam language supports concurrent programming and is a language where interprocess interaction takes place by communications. This may lead to deadlock due to communication failure. Proper systematic methods must be adopted in the design of concurrent software for distributed computing systems if the communication structure is to be free of pathologies, such as deadlock. The objective of this thesis is to provide a design environment which ensures that processes are free from deadlock. A software tool was designed and used to facilitate the production of fault-tolerant software for distributed concurrent systems. Where Occam is used as a design language then state space methods, such as Petri-nets, can be used in analysis and simulation to determine the dynamic behaviour of the software, and to identify structures which may be prone to deadlock so that they may be eliminated from the design before the program is ever run. This design software tool consists of two parts. One takes an input program and translates it into a mathematical model (Petri-net), which is used for modeling and analysis of the concurrent software. The second part is the Petri-net simulator that takes the translated program as its input and starts simulation to generate the reachability tree. The tree identifies `deadlock potential' which the user can explore further. Finally, the software tool has been applied to a number of Occam programs. Two examples were taken to show how the tool works in the early design phase for fault prevention before the program is ever run.

Tear protein interaction with hydrogel contact lenses

The design and synthesis of biomaterials covers a growing number of biomedical applications. The use of biomaterials in biological environment is associated with a number of problems, the most important of which is biocompatabUity. If the implanted biomaterial is not compatible with the environment, it will be rejected by the biological site. This may be manifested in many ways depending on the environment in which it is used. Adsorption of proteins takes place almost instantaneously when a biomaterial comes into contact with most biological fluids. The eye is a unique body site for the study of protein interactions with biomaterials, because of its ease of access and deceptive complexity of the tears. The use of contact lenses for either vision correction and cosmetic reasons or as a route for the controlled drug delivery, has significantly increased in recent years. It is relatively easy to introduce a contact lens Into the tear fluid and remove after a few minutes without surgery or trauma to the patient. A range of analytical techniques were used and developed to measure the proteins absorbed to some existing commercial contact lens materials and also to novel hydrogels synthesised within the research group. Analysis of the identity and quantity of proteins absorbed to biomaterials revealed the importance of many factors on the absorption process. The effect of biomaterial structure, protein nature in terms of size. shape and charge and pH of the environment on the absorption process were examined in order to determine the relative up-take of tear proteins. This study showed that both lysozyme and lactoferrin penetrate the lens matrix of ionic materials. Measurement of the mobility and activity of the protein deposited into the surface and within the matrix of ionic lens materials demonstrated that the mobility is pH dependent and, within the experimental errors, the biological activity of lysozyme remained unchanged after adsorption and desorption. The study on the effect of different monomers copolymerised with hydroxyethyl methacrylate (HEMA) on the protein up-take showed that monomers producing a positive charge on the copolymer can reduce the spoilation with lysozyme. The studies were extended to real cases in order to compare the patient dependent factors. The in-vivo studies showed that the spoilation is patient dependent as well as other factors. Studies on the extrinsic factors such as dye used in colour lenses showed that the addition of colourant affects protein absorption and, in one case, its effect is beneficial to the wearer as it reduces the quantity of the protein absorbed.

Utilising online shopping environment attributes holistically to create competitive advantage

As more consumers shop online, it becomes crucial for marketers to know how online shopping environments (OSEs) can be used to gain competitive advantage. This dissertation aims to explain theoretically how OSE attributes work together holistically to produce desirable consumer responses, applying and extending a theory from the environmental psychology literature to the online context. Firstly, the study conceptualises OSEs as virtual environments which may be perceived and experienced both cognitively and affectively through a technology-mediated interaction with a computer screen. A multi-disciplinary approach identifies key characteristics of OSEs: they involve consumers; they are more complex than their offline counterparts; they are likely first apprehended holistically; and they can elicit high levels of emotions and cognition. Secondly, the research uses a gestalt approach and extends Kaplan and Kalan’s (1982) Preference Framework, taking account of the specific characteristics of OSEs, which one visits specifically to obtain product information. The results support the proposition that OSEs are perceived in terms of their Sense-making and Exploratory attributes. Thirdly, the research explains how OSE attributes work together to produce desirable consumer responses. As hypothesised, Exploratory potential produces both Hedonic and Utilitarian value, and both kinds of value contribute to Site commitment. An unexpected result is that Sense-making potential does not produce Utilitarian value directly, but only through the mediation of Exploratory potential. The research contributes to marketing theory by: (1) identifying ways the internet has changed the nature of the shopping experience; (2) extending Kaplan and Kaplan’s Preference Framework to explain how consumers perceive OSEs holistically; (3) identifying the distinction between page-level and site-level perceptions, and (4) distinguishing between different sources of information (marketer vs. non-marketer). Managerially, the research provides a model for marketers to conceive and design retail websites whose attributes work together to create competitive advantage.

The interaction between the implementation of an occupational health and safety management system and safety culture:a case study in the rubber industry

A prominent theme emerging in Occupational Health and Safety (OSH) is the development of management systems. A range of interventions, according to a prescribed route detailed by one of the management systems, can be introduced into an organisation with some expectation of improved OSH performance. This thesis attempts to identify the key influencing factors that may impact upon the process of introducing interventions, (according to B88800: 1996, Guide to Implementing Occupational Health and Safety Management Systems) into an organisation. To help identify these influencing factors a review of possible models from the sphere of Total Quality Management (TQM) was undertaken and the most suitable TQM model selected for development and use in aSH. By anchoring the aSH model's development in the reviewed literature a range ofeare, medium and low level influencing factors were identified. This model was developed in conjunction with the research data generated within the case study organisation (rubber manufacturer) and applied to the organisation. The key finding was that the implementation of an OSH intervention was dependant upon three broad vectors of influence. These are the Incentive to introduce change within an organisation which refers to the drivers or motivators for OSH. Secondly the Ability within the management team to actually implement the changes refers to aspects, amongst others, such as leadership, commitment and perceptions of OSH. Ability is in turn itself influenced by the environment within which change is being introduced. TItis aspect of Receptivity refers to the history of the plant and characteristics of the workforce. Aspects within Receptivity include workforce profile and organisational policies amongst others. It was found that the TQM model selected and developed for an OSH management system intervention did explain the core influencing factors and their impact upon OSH performance. It was found that within the organisation the results that may have been expected from implementation of BS8800:1996 were not realised. The OSH model highlighted that given the organisation's starting point, a poor appreciation of the human factors of OSH, gave little reward for implementation of an OSH management system. In addition it was found that general organisational culture can effectively suffocate any attempts to generate a proactive safety culture.

Lateral instability of slender reinforced concrete columns in a fire environment

The research concerns the development and application of an analytical computer program, SAFE-ROC, that models material behaviour and structural behaviour of a slender reinforced concrete column that is part of an overall structure and is subjected to elevated temperatures as a result of exposure to fire. The analysis approach used in SAFE-RCC is non-linear. Computer calculations are used that take account of restraint and continuity, and the interaction of the column with the surrounding structure during the fire. Within a given time step an iterative approach is used to find a deformed shape for the column which results in equilibrium between the forces associated with the external loads and internal stresses and degradation. Non-linear geometric effects are taken into account by updating the geometry of the structure during deformation. The structural response program SAFE-ROC includes a total strain model which takes account of the compatibility of strain due to temperature and loading. The total strain model represents a constitutive law that governs the material behaviour for concrete and steel. The material behaviour models employed for concrete and steel take account of the dimensional changes caused by the temperature differentials and changes in the material mechanical properties with changes in temperature. Non-linear stress-strain laws are used that take account of loading to a strain greater than that corresponding to the peak stress of the concrete stress-strain relation, and model the inelastic deformation associated with unloading of the steel stress-strain relation. The cross section temperatures caused by the fire environment are obtained by a preceding non-linear thermal analysis, a computer program FIRES-T.

Speaking out of turn? Taking the initiative in teacher-fronted classroom interaction.

Teacher-fronted interaction is generally seen to place limitations on the contributions that learners can make to classroom discourse and the conclusion is that learners are unable to experiment with, for example, turn-taking mechanisms. This article looks at teacher-fronted interaction in the language classroom from the perspective of learner talk by examining how learners might take the initiative during this apparently more rigid form of interaction. Detailed microanalysis of classroom episodes, using a conversation analysis institutional discourse approach, shows how learners orient to the institutional context to make sophisticated and effective use of turn-taking mechanisms to take the initiative and direct the interaction, even in the controlled environment of teacher-fronted talk. The article describes some of the functions of such learner initiative, examines how learners and teachers co-construct interaction and how learners can create learning opportunities for themselves. It also briefly looks at teacher reactions to such initiative. The article concludes that learner initiative in teacher-fronted interaction may constitute a significant opportunity for learning and that teachers should find ways of encouraging such interaction patterns.

Modeling naturalistic argumentation in research literatures:representation and interaction design issues

This article characterizes key weaknesses in the ability of current digital libraries to support scholarly inquiry, and as a way to address these, proposes computational services grounded in semiformal models of the naturalistic argumentation commonly found in research literatures. It is argued that a design priority is to balance formal expressiveness with usability, making it critical to coevolve the modeling scheme with appropriate user interfaces for argument construction and analysis. We specify the requirements for an argument modeling scheme for use by untrained researchers and describe the resulting ontology, contrasting it with other domain modeling and semantic web approaches, before discussing passive and intelligent user interfaces designed to support analysts in the construction, navigation, and analysis of scholarly argument structures in a Web-based environment. © 2007 Wiley Periodicals, Inc. Int J Int Syst 22: 17–47, 2007.