Tratamento de águas oleosas oriundas do processo de produção de óleo de dendê utilizando a flotação por ar dissolvido

This study was developed to evaluate the performance of different coagulant and pH dosages by applying the use of Dissolved Air Flotation (FAD) to enable its use in effluent treatment of the extraction process of palm oil. The study was developed in the laboratory, where studies about emulsions stability were made for the production of a synthetic effluent which best suit the characteristics of raw effluent. The synthetic water that would be used in the tests of FAD was produced, once the stability and characterization which best approached the raw wastewater was obtained. Trials tested three coagulant doses, combined with various pH ranges and five upward velocities (Va), finding an optimal range of this combination. Some operating parameters such as time and gradient of rapid mixing (20 s / 1000 s-1), time and gradient flotation (15 min / 60 s-1), chamber pressure saturation (450 kPa) and recirculation rate (20%) were set. In this way, samples were collected for analysis of the removal of turbidity parameters, suspended solids and oils and greases. This one is obtained by a correlation turbidity x oils and greases, referring to the previous analysis. The degree of removal obtained were 73,97% for turbidity, 51,4% for total suspended solids and 86,2% for oils and greases. Removal rates may be increased in later studies, by ranging the velocity gradient and flocculation parameters and the recirculation ratio, and by using lower flotation speeds to these effluent characteristics.

Seleção de bactérias fenololíticas para tratamento de efluentes de refinarias de petróleo

Os efluentes de indústrias, como refinarias e petroquímicas, frequentemente contém elevadas concentrações de substâncias tóxicas, dentre elas, os compostos fenólicos. Estas substâncias, mesmo em pequenas quantidades, afetam as propriedades organolépticas da água, além de que durante o processo de cloração da água potável, podem ser transformadas em clorofenóis e policlorofenóis, pela reação com o cloro, formando substâncias com características carcinogênicas. Neste sentido, o refino do petróleo produz grande variedade de poluentes cujas propriedades modificam-se em função dos processos utilizados. Os fenóis são compostos tóxicos, com características fungicida e desinfetante, sendo tóxico para a maioria dos microrganismos, além de apresentarem ação de carcinogenicidade, mutagenicidade e serem recalcitrantes, acumulam-se nos corpos receptores, gerando danos à saúde e à vida aquática. No entanto, embora o fenol possua ação bactericida, alguns microrganismos adquiriram a habilidade de se adaptar e utilizar este composto como fonte de carbono e energia. O presente trabalho pretendeu selecionar linhagens bacterianas, a partir do efluente de uma refinaria de petróleo, da região de Paulínia – SP, que sejam capazes de utilizar altos teores de fenóis como fonte de carbono e energia para seu crescimento e desenvolvimento, a fim de serem aplicadas nas estações de tratamento de efluentes industriais, com foco nas refinarias de petróleo. Foram isoladas 3 linhagens a partir das amostras enriquecidas do efluente da refinaria e, após os ensaios, constatou-se que 1 linhagem apresentou resistência à concentração de fenol de 1.000 mg.L-1. Os ensaios de biodegradação e crescimento em fenol como única fonte de carbono, demonstraram que estas linhagens são capazes de biodegradar aproximadamente 20% do fenol disponível no meio, no período de 24 horas. A quantificação do fenol residual foi realizada em...

Ajuste do modelo QUAL2K e simulação de cenários para o Ribeirão Claro

The project has as objective to adjust the model QUAL2K to “Ribeirão Claro” river to evaluate the behavior of OD and DBO when are simulated the following sceneries: (i) implantation of a hypothetic wastewater station treatment that treats all the effluent thrown nowadays in the body of water; (ii) increase of withdrawal flow of DAAE to public supply and (iii) increase of nowadays flow of wastewater throwing, being the two last caused for the population increasing. The results obtained allowed to conclude that the model QUAL2K presented a good adjustment to the variable OD and a reasonable adjustment to the variable DBO, being that the same was suitable to the simulation of the sceneries proposed.

Avaliação da auto-suficiência energética em reatores anaeróbios aplicados ao tratamento de resíduos da indústria de produção do etanol

Ethanol, the main automotive biofuel, has its production based on the fermentation of sugars found in biological materials and on the distillation of the alcoholic media formed during the fermentative process. Stillage is the main residue from ethanol production, containing a high organic loading in addition to acidic and corrosive characteristics. Considering the available technologies to treat stillage, we highlight anaerobic digestion, which allows the reduction of the impacts associated to pollutants loading of this effluent and the generation of energy from the methane gas produced in the process. Based on the high treatment efficiency usually associated to the anaerobic process, this work aimed to assess whether anaerobic systems applied to the treatment of stillage are energetically self-sufficient. First we evaluated the energy recovery capacity in an anaerobic reactor applied to the treatment of stillage resulting from corn-to-ethanol processing. The results indicated the great influence that a correct selection of electrical equipment and their respective operating periods have on the net energy balance of the anaerobic treatment. The high energy consumption of the heater would not allow the system to achieve a positive net energy balance – the maximum energy recovery would reach only 0.68% of the consumption. However, the replacement of the mixture equipment would result in energy gains ranging from 8.5 to 967.9% of the consumption. In this work we also assessed the efficiency of methane yields for a few studies and the correlation between some parameters of the anaerobic process. With respect to the methane yield, we noted that mesophilic systems tend to be more advantageous than the thermophilic ones (efficiency of 76.45 ± 22.51% vs. 69.40 ± 30.36%). Considering the study... (Complete abstract click electronic access below)

Remoção de matéria orgânica e nitrogênio de efluentes provenientes de abatedouros de bovinos por meio de reator aeróbio operando em bateladas sequenciais com adição de coagulante químico

The volume of liquid effluent generated in cattle slaughterhouses is quite high and cannot be released untreated in water bodies due to its high pollution load of predominantly organic origin. To minimize the environmental impacts of its industrial wastewater and meet the local environmental legislation, abattoirs shall make the treatment of these effluents. The present work aims to develop the study of a reactor by sequential batch pilot scale, in order to optimize their performance in treating wastewater from a cattle slaughterhouse. The treatment system used was developed and installed in the Laboratory of Wastewater Treatment, in Faculty of Science and Technology UNESP, Presidente Prudente campus. The procedure used followed the operation of sequential batch reactors, in which all processes and treatment operations occurring sequentially in a single unit, by establishing specific operating cycles, which comprise the following separated phases: aerobic reaction, anoxic reaction, sedimentation and emptying. Aiming to improve the quality of treatment was planned the addition of coagulant Poly Aluminum Chloride (PAC) in the reactor, by determining their optimal dosage by Jar-test trials. Were prepared four steps with specific operating cycles: step one or acclimatization (10 hour of aeration, one hour and 30 minutes of sedimentation and 30 minutes for exchanging the effluent); step 2 (6 hours of aeration or aerobic phase, 4 hours and 45 minutes of stirring or anoxic phase and 1 hour and 15 minutes for sedimentation and exchange effluent); step 3 (2 hours and 30 minutes of aeration, 8 hours and 15 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange) and step 4 (2 hours of aeration, 8 hours and 45 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange)... (Complete abstract click electronic access below)

Avaliação da toxicidade da vinhaça por meio da análise histológica de fígados de peixes Oreochromis niloticus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação de eficiências do uso de sistemas construídos de áreas alagadas (Constructed Wetland Systems - CWS), tipos ascendente e descendente, para tratamento de efluentes

Water is an essential element for life. The use of this element, to support the community, defines it as water resource. This feature is being misused and degraded by the dumping of highly contaminated effluents. The impoverishment of its quality poses a risk to human consumption. The necessity to manage this resource, treating the wastewater properly, requires the constant improvement of treatment systems. Another need is to adjust the cost of systems to the demands of communities with less financial clout. This study aimed to adapt and understand the systems of wetlands, improving its efficiency, in an attempt to collaborate with the enrichment of this technology. The practical evidence, with lab-scale prototypes, assembled in ETE Piracicamirim with urban sewage effluent contributed to highlight the problems and operating system design. The bibliographic review showed that several studies had effectiveness for treatment. But it was evident the need for better understanding of dimensioning definitions that better attempted to the answers into the project. Moreover, standardization of system conditions for the specific wastewater treatment is an interesting field, identified, for future studies yet contribute to environmental engineering and sanitation

Avaliação da eficiência do sistema de tratamento de efluentes de frigorífico: um estudo de caso em Rio Claro/SP

Não disponível

Ensaios ecotoxicológicos da biodegradação de óleos

O presente trabalho teve como objetivo estudar a biodegradação de efluente oleosos em ambiente terrestre. Foram avaliados os potenciais degradação dos seguintes óleos: óleo lubrificante automotivo usado, óleo vegetal novo e usado, e biodiesel. Os ensaios realizados objetivaram, pelo método de respirometria, quantificar e comparar as porcentagens de biodegradação medida através da formação do CO2 da respirometria bacteriana entre amostras de solos contaminados por diferentes tipos de óleo. Além destes ensaios, foram realizados testes colorimétricos que, indicarão, pela mudança de cor do indicador, quais os óleos levam mais tempo para serem completamente degradados. Dessa maneira, foi possível verificar a degradabilidade relativa dos óleos, e contribuir para futuras pesquisas envolvendo a poluição de ambientes com efluentes oleosos. Os dados coletados permitiram verificar a toxicidade e biodegradabilidade relativa dos óleos, de modo que os ensaios contendo biodiesel e óleo vegetal novo tiveram menor índice de biodegradação, quando comparado ao óleo automotivo usado.

Tratamento de efluentes provenientes de abatedouro de bovinos por meio de reator enzimático seguido de reator aeróbio operado em bateladas sequenciais

Brazil has one of the largest cattle herds in the world, so the cattle slaughter is one of the most important economic activities in the Brazilian market. But this activity requires a high demand of water, resulting in serious problems about the correct disposal of wastewater generated in the process. This effluent has a high pollution load, becoming its receiving bodies (streams and rivers) unfit for various activities such as public water supply, recreation, fisheries. To minimize the environmental impacts of its industrial wastewater and fallow the local environmental legislation, refrigerators must make the treatment of these effluents. This study aimed to verify the efficiency of a enzymatic reactor, when occur hydrolysis of lipids present in the effluent industrial of an cattle slaughter industry. The treatment system used was composed of two separate reactors: one being the anaerobic fluidized bed reactor (AFBR), inoculated with immobilized enzymes on the matrix support, and the other by sequential batch reactor (SBR) inoculated with activated sludge. Whereas, the reactors have been developed and installed at the Wastewater Treatment Laboratory, Faculdade de Ciências e Tecnologia, UNESP, campus Presidente Prudente. The procedure operating occurred differently for each reactor: preparation and inoculation of enzyme granules, filling the reactor, hydrolysis, and AFBR emptying, filling, aerobic reaction, sedimentation, and emptying the SBR. We performed three experimental stages, with the first and second stage of the work were done reactor analyzes separately, and the third step of the analysis were made with the interconnected reactors... (Complete abstract electronic access below)

Valoração do tratamento de efluentes de um curtume

During the production process of leather a lot of water is used. In addition, companies such as tanneries have high pollution potential. The effluent that is not properly treated , and it is irregularly released in water bodies can cause negative impacts to the environment and generate fines. The aim of this paper is to present the importance of environmental valuation in the effluent treatment system of a tannery, in order to add social and economic development with preservation of environmental quality. A valuation of inputs and outputs of the effluent treatment process from Tannery Bull in Presidente Prudente was made, as well as a proposal to improve the treatment and its valuation. Many of these industries do not account the costs from the effluent treatment and end up spending what could have been avoided. The management of environmental costs promotes sustainable development. Thus, we can conclude that, if there were better control and also an improved management of the tannery, the proposed treatment would bring economic improvement to the company and specially it would not cause much impact on the environment, including improving the quality of life in the region

Efeito da aplicação de água residuária de graxaria em elementos químicos do solo e na produção e composição mineral de duas espécies forrageiras

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Fermentação metanogênica mesofílica de melaço e termofílica de vinhaça em reatores UASB

Pós-graduação em Microbiologia Agropecuária - FCAV

Degradação da manipueira utilizando reator de lodo ativado em batelada sequencial com elevado tempo de paralisação intermitente da aeração

Conselho Nacional de Desenvolvimento em Pesquisa (CNPq)

Avaliação de lagoas de lemnáceas no polimento de esgoto doméstico e produção de biomassa

Pós-graduação em Engenharia Civil - FEIS