Performance and economic indicators of a large scale fish farming in Mato Grosso, Brazil

Performance and economic indicators of a large scale fish farm that produces round fish, located in Mato Grosso State, Brazil, were evaluated. The 130.8 ha-water surface area was distributed in 30 ponds. Average total production costs and the following economic indicators were calculated: gross income (GI), gross margin (GM), gross margin index (GMI), profitability index (PI) and profit (P) for the farm as a whole and for ten ponds individually. Production performance indicators were also obtained, such as: production cycle (PC), apparent feed conversion (FC), average biomass storage (ABS), survival index (SI) and final average weight (FAW). The average costs to produce an average 2.971 kg.ha-1 per year were: R$ 2.43, R$ 0.72 and R$ 3.15 as average variable, fixed and total costs, respectively. Gross margin and profit per year per hectare of water surface were R$ 2,316.91 and R$ 180.98, respectively. The individual evaluation of the ponds showed that the best pond performance was obtained for PI 38%, FC 1.7, ABS 0.980 kg.m-2, TS 56%, FAW 1.873 kg with PC of 12.3 months. The worst PI was obtained for the pond that displayed losses of 138%, FC 2.6, ABS 0.110 kg.m-2, SI 16% and FAW 1.811 kg. However, large scale production of round-fish in farms is economically feasible. The studied farm displays favorable conditions to improve performance and economic indicators, but it is necessary to reproduce the breeding techniques and performance indicators achieved in few ponds to the entire farm.

ECONOMIC PROFITABILITY OF THE BAKKEN, NORTH DAKOTA UNCONVENTIONAL OIL PLAYS BASED ON A TYPICAL WELL PERFORMANCE WITH CURRENT MARKET CONDITIONS

Increases in oil prices after the economic recession have been surprising for domestic oil production in the United States since the beginning of 2009. Not only did the conventional oil extraction increase, but unconventional oil production and exploration also improved greatly with the favorable economic conditions. This favorable economy encourages companies to invest in new reservoirs and technological developments. Recently, enhanced drilling techniques including hydraulic fracturing and horizontal drilling have been supporting the domestic economy by way of unconventional shale and tight oil from various U.S. locations. One of the main contributors to this oil boom is the unconventional oil production from the North Dakota Bakken field. Horizontal drilling has increased oil production in the Bakken field, but the economic issues of unconventional oil extraction are still debatable due to volatile oil prices, high decline rates of production, a limited production period, high production costs, and lack of transportation. The economic profitability and viability of the unconventional oil play in the North Dakota Bakken was tested with an economic analysis of average Bakken unconventional well features. Scenario analysis demonstrated that a typical North Dakota Bakken unconventional oil well is profitable and viable as shown by three financial metrics; net present value, internal rate of return, and break-even prices.

Application of the UK Foresight Obesity Model in Ireland: The Health and Economic Consequences of Projected Obesity Trends in Ireland

Given the scale of the current obesity epidemic and associated health consequences there has been increasing concern about the economic burden placed on society in terms of direct healthcare costs and indirect societal costs. In the Republic of Ireland these costs were estimated at €1.13 billion for 2009. The total direct healthcare costs for six major obesity related conditions (coronary heart disease & stroke, cancer, hypertension, type 2 diabetes and knee osteoarthritis) in the same year were estimated at €2.55 billion. The aim of this research is to project disease burden and direct healthcare costs for these conditions in Ireland to 2030 using the established model developed by the Health Forum (UK) for the Foresight: Tackling Obesities project.

Economic impact of political protests (strikes) on manufacturing firms : evidence from Bangladesh

Political protests in the form of strikes, locally known as hartal, remain quite common in the Indian subcontinent countries. Such a form of protests is associated with mass movement, intended to cause a total shutdown of economic activities and often results in coercion, violence, and damage to both public and private properties. Utilizing the World Bank Enterprise survey data of 2007 and 2013 of Bangladesh, this study examines the impacts of hartals on manufacturing firms. We find that political protests significantly increase costs for firms. Using flexible cost function based on factor analysis we see that the factor-neutral effect of strikes is positive and statistically significant, showing evidence of a reduction in firm productivity due to hartals. However, we did not find any evidence for systematic factor re-optimization by firms – in response to political strikes – suggesting that firms do not reallocate factor shares to tackle uncertain and irregular shocks like hartals.

Economic evaluations of clinical pharmacy services in Ireland, 2007-2015

Introduction The concept of this thesis was driven by stagnation within the Irish healthcare system. Multiple reports from pharmacy organisations had outlined possible future directions for the profession but progress was minimal, especially in comparison with other countries. The author’s directive was to evaluate the economic impact of a series of clinical pharmacy services (CPS) in hospital and community settings. Methods A systematic review of economic evaluations of clinical pharmacy services in hospital patients was undertaken to gain insight into recent research in the field. Eligible studies were evaluated using the Consolidated Health Economic Evaluation Reporting Standards (CHEERS), to establish the quality, consistency and transparency of relevant research. A retrospective analysis of an internal hospital pharmacy interventions database was conducted. A method first described by Nesbit et al. was implemented to estimate the level of cost avoidance achieved. A cost-effectiveness analysis based on data from a randomised controlled trial of a pharmacist-supervised patient self-testing (PST) of warfarin therapy is presented. Outcome measure was the incremental cost associated with six months of intervention management. A similar cost-effectiveness analysis based on previously published RCT data was used to evaluate a novel structured pharmacist review of medication in older hospitalised patients. Cost-effectiveness analysis was presented in the form of an incremental cost-effectiveness ratio (ICER). An ICER is an additional cost per unit effect, in the case of this study, the cost of preventing an additional non-trivial ADR in hospital. A method described by Preaud et al. was adapted to estimate the clinical and economic benefit gained from vaccination of patients by a community pharmacist in Ireland in 2013/14. Sample demographic data was obtained from a national chain of community pharmacies and applied to overall national vaccination data. Results Systematic review identified twenty studies which were eligible for inclusion. Overall, pharmacist interventions had a positive impact on hospital budgets. Only three studies (15%) were deemed to be “good-quality” studies. No ‘novel’ clinical pharmacist intervention was identified during the course of this review. Analysis of internal hospital database identified 4,257 interventions documented on 2,147 individual patients over a 12 month period. Substantial cost avoidance of €710,000 was generated over a 1 year period from the perspective of the health care provider. Mean cost avoidance of €166 per intervention was generated. The cost of providing these interventions was €82,000. Substantial net cost-benefits of €626,279 and a cost-benefit ratio of 8.64 : 1 were generated based on this evaluation of pharmacist interventions. Results from an evaluation of a novel pharmacist-led form of warfarin management indicated indicated that on a per patient basis, PST was slightly more expensive than established anticoagulant management. On a per patient basis over a six month period, PST resulted in an incremental cost of €59.08 in comparison with routine care. Overall cost of managing a patient through pharmacist-supervised PST for a six month period is €226.45. However, for this increase in cost a clinically significant improvement in care was provided. Patients achieved a significantly higher time in therapeutic range during the PST arm in comparison with routine care, (72 ± 19.7% vs 59 ± 13.5%). Difference in overall cost was minimal and PST was the dominant strategy in some scenarios examined during sensitivity analysis. Structured pharmacist review of medication was determined to be dominant in comparison to usual pharmaceutical care. Even if the healthcare payer was unwilling to pay any money for the prevention of an ADR, the intervention strategy is still likely to be cost-effective (probability of being determined cost-effective = 0.707). Implementation of pharmacist-led influenza vaccination has resulted in substantial clinical and economic benefits to the healthcare system. The majority of patients (64.9%) who availed of this service had identifiable influenza-related risk factors. Of patients with influenza-related risk factors, age ≥65 year was the most commonly cited risk factor. Pharmacist vaccination services averted a total of 848 influenza cases across all age groups during the 2013/2014 influenza season. Due to receipt of vaccination in a pharmacy setting, 444 influenza-related GP visits were prevented. In terms of more serious influenza-associated events, 11 hospitalisations and five influenza-related deaths were averted. Costs averted were approximately €305,000. These were principally wider societal-related costs associated with lost productivity. Conclusion Overall, clinical pharmacy services are adding value to the Irish healthcare system in both hospital and community settings, but provision of additional funding for new services would enable them to offer a great deal more.

Techno-economic analysis of three HVAC retrofitting options

Accounting for around 40% of the total final energy consumption, the building stock is an important area of focus on the way to reaching the energy goals set for the European Union. The relatively small share of new buildings makes renovation of existing buildings possibly the most feasible way of improving the overall energy performance of the building stock. This of course involves improvements on the climate shell, for example by additional insulation or change of window glazing, but also installation of new heating systems, to increase the energy efficiency and to fit the new heat load after renovation. In the choice of systems for heating, ventilation and air conditioning (HVAC), it is important to consider their performance for space heating as well as for domestic hot water (DHW), especially for a renovated house where the DHW share of the total heating consumption is larger. The present study treats the retrofitting of a generic single family house, which was defined as a reference building in a European energy renovation project. Three HVAC retrofitting options were compared from a techno-economic point of view: A) Air-to-water heat pump (AWHP) and mechanical ventilation with heat recovery (MVHR), B) Exhaust air heat pump (EAHP) with low-temperature ventilation radiators, and C) Gas boiler and ventilation with MVHR. The systems were simulated for houses with two levels of heating demand and four different locations: Stockholm, Gdansk, Stuttgart and London. They were then evaluated by means of life cycle cost (LCC) and primary energy consumption. Dynamic simulations were done in TRNSYS 17. In most cases, system C with gas boiler and MVHR was found to be the cheapest retrofitting option from a life cycle perspective. The advantage over the heat pump systems was particularly clear for a house in Germany, due to the large discrepancy between national prices of natural gas and electricity. In Sweden, where the price difference is much smaller, the heat pump systems had almost as low or even lower life cycle costs than the gas boiler system. Considering the limited availability of natural gas in Sweden, systems A and B would be the better options. From a primary energy point of view system A was the best option throughout, while system B often had the highest primary energy consumption. The limited capacity of the EAHP forced it to use more auxiliary heating than the other systems did, which lowered its COP. The AWHP managed the DHW load better due to a higher capacity, but had a lower COP than the EAHP in space heating mode. Systems A and C were notably favoured by the air heat recovery, which significantly reduced the heating demand. It was also seen that the DHW share of the total heating consumption was, as expected, larger for the house with the lower space heating demand. This confirms the supposition that it is important to include DHW in the study of HVAC systems for retrofitting.

Toward adaptive management of coastal MPAs: The influence of different conservation targets and costs on the design of no-take areas

There is still much discussion on the most appropriate location, size and shape of marine protected areas (MPAs). These three factors were analyzed for a small coastal MPA, the Luiz Saldanha Marine Park (LSMP), for which a very limited amount of local ecological information was available when implemented in 1998. Marxan was used to provide a number of near-optimal solutions considering different levels of protection for the various conservation features and different costs. These solutions were compared with the existing no-take area of the LSMP. Information on 11 habitat types and distribution models for 3 of the most important species for the local artisanal fisheries was considered. The human activities with the highest economic and ecological impact in the study area (commercial and recreational fishing and scuba diving) were used as costs. The results show that the existing no-take area is actually located in the best area. However, the no-take area offers limited protection to vagile fish and covers a very small proportion of some of the available habitats. An increase in the conservation targets led to an increase in the number of no-take areas. The comparative framework used in this study can be applied elsewhere, providing relevant information to local stakeholders and managers in order to proceed with adaptive management. (C) 2015 Elsevier B.V. All rights reserved.

Economic and Environmental Optimization of Ornamental Stone Block Cutting with a 3D Algorithm

This thesis focuses on finding the optimum block cutting dimensions in terms of the environmental and economic factors by using a 3D algorithm for a limestone quarry in Foggia, Italy. The environmental concerns of quarrying operations are mainly: energy consumption, material waste, and pollution. The main economic concerns are the block recovery, the selling prices, and the production costs. Fractures adversely affect the block recovery ratio. With a fracture model, block production can be optimized. In this research, the waste volume produced by quarrying was minimised to increase the recovery ratio and ensure economic benefits. SlabCutOpt is a software developed at DICAM–University of Bologna for block cutting optimization which tests different cutting angles on the x-y-z planes to offer up alternative cutting methods. The program tests several block sizes and outputs the optimal result for each entry. By using SlabCutOpt, ten different block dimensions were analysed, the results indicated the maximum number of non-intersecting blocks for each dimension. After analysing the outputs, the block named number 1 with the dimensions ‘1mx1mx1m’ had the highest recovery ratio as 43% and the total Relative Money Value (RMV) with a value of 22829. Dimension number 1, also had the lowest waste volume, with a value of 3953.25 m3, for the total bench. For cutting the total bench volume of 6932.25m3, the diamond wire cutter had the lowest dust emission values for the block with the dimension ‘2mx2mx2m’, with a value of 24m3. When compared with the Eco-Label standards, block dimensions having surface area values lower than 15m2, were found to fit the natural resource waste criteria of the label, as the threshold required 25% of minimum recovery [1]. Due to the relativity of production costs, together with the Eco-Label threshold, the research recommends the selection of the blocks with a surface area value between 6m2 and 14m2.

Sistematização do dimensionamento técnico e econômico de sistemas fotovoltaicos isolados por meio de programa computacional

One of the main referring subjects to the solar energy is how to compare it economically with other sources of energy, as much alternatives as with conventionals (like the electric grid). The purpose of this work was to develop a software which congregates the technical and economic main data to identify, through methods of microeconomic analysis, the commercial viability in the sizing of photovoltaic systems, besides considering the benefits proceeding from the proper energy generation. Considering the period of useful life of the components of the generation system of photovoltaic electricity, the costs of the energy proceeding from the conventional grid had been identified. For the comparison of the conventional sources, electric grid and diesel generation, three scenes of costs of photovoltaic panels and two for the factor of availability of diesel generation had been used. The results have shown that if the cost of the panels is low and the place of installation is more distant of the electric grid, the photovoltaic system becomes the best option.

Desempenho produtivo, características de carcaça e avaliação econômica de bovinos cruzados, castrados e não-castrados, terminados em pastagens de Brachiaria decumbens

Avaliou-se o efeito da castração sobre o desempenho produtivo e sobre as características de carcaça e realizou-se a avaliação econômica de bovinos terminados em pastagens de Brachiaria decumbens. Foram utilizados oito novilhos Canchim-Nelore com 14 meses de idade, sendo quatro animais castrados e quatro não-castrados, com média de peso corporal de 273,2kg. O delineamento foi inteiramente ao acaso com quatro repetições por tratamento. Os animais receberam, diariamente, 0,7% do PC de suplemento proteíco-energético e foram abatidos aos 26 meses de idade. O peso de abate e o ganho médio diário (GMD) diferiram entre castrados e não-castrados, com médias de 441,0 e 482,2kg e 0,6 e 0,7kg/dia, respectivamente. Não houve efeito da castração sobre as características avaliadas, com exceção do peso de abate, do peso da carcaça quente, 252,3 versus 229,9kg, da cor da carne, 3,25 versus 4,50 pontos e da espessura da gordura subcutânea, 0,6 versus 1,4mm, respectivamente, para não-castrados e castrados. A lucratividade por animal e por hectare foi de 14,5 e 15,8% para não-castrados e 4,5 e 5,8% para castrados, respectivamente. Sugere-se a utilização de bovinos não-castrados suplementados em pastagens de Brachiaria decumbens.

Nutritional reserves of Vochysiaceae seeds: chemical diversity and potential economic uses

Contents of proteins, carbohydrates and oil of seeds of 57 individuals of Vochysiaceae, involving one species of Callisthene, six of Qualea, one of Salvertia and eight of Vochysia were determined. The main nutritional reserves of Vochysiaceae seeds are proteins (20% in average) and oils (21. 6%). Mean of carbohydrate contents was 5. 8%. Callisthene showed the lowest protein content (16. 9%), while Q. cordata was the species with the highest content (30% in average). The contents of ethanol soluble carbohydrates were much higher than those of water soluble carbohydrates. Oil contents lay above 20% for most species (30. 4% in V. pygmaea and V. pyramidalis seeds). The predominant fatty acids are lauric (Q. grandiflora), oleic (Qualea and Salvertia) or acids with longer carbon chains (Salvertia and a group of Vochysia species). The distribution of Vochysiaceae fatty acids suggests for seeds of some species an exploitation as food sources (predominance of oleic acid), for other species an alternative to cocoa butter (high contents or predominance of stearic acid) or the production of lubricants, surfactants, detergents, cosmetics and plastic (predominance of acids with C20 or C22 chains) or biodiesel (predominance of monounsaturated acids). The possibility of exploitation of Vochysiaceae products in a cultivation regimen and in extractive reserves is discussed.

Trade unions and the economic performance of brazilian establishments

Este artigo analisa, pela primeira vez na literatura, o impacto dos sindicatos de trabalhadores em vários indicadores de desempenho econômico de firmas industriais brasileiras. Realizou-se uma pesquisa retrospectiva sobre a densidade sindical de 1000 estabelecimentos industriais brasileiros e seus resultados foram combinados aos indicadores de desempenho econômico da Pesquisa Industrial Anual (PIA) de 1990 a 2000. Os resultados indicam que a relação entre a densidade sindical na firma e seus salários, emprego e produtividade, é não-linear, ou seja, um aumento no grau de sindicalização leva a um melhor desempenho, porém a taxas decrescentes. Observou-se, também, uma relação negativa entre sindicalização e rentabilidade. Finalmente, estabelecimentos que introduziram mecanismos de 'participação nos lucros' aumentaram sua produtividade e rentabilidade no período e pagaram maiores salários nas firmas onde o grau de sindicalização era maior.

Análise técnica e econômica de prestadores de serviços na colheita florestal

The objective of this Study was to describe the financial conditions of forestry contractors, concerning life quality aspects, condition of work and equipments, operational costs, and economic credit to invest in new technologies. Five companies had been analyzed, with an annual income between US$ 400,000.00 and US$ 1,720,000.00, with an average of US$ 950,000.00. The number of employees varied between 33 and 181, and the companies were classified in terms of size as: one small, two average, and two big. The main difficulties to invest in new machines were high financial taxes, more than 12% an year, and a lack of long term contracts to guarantee the payment capability. It was observed that the contractors did not consider the capital remuneration and a correct depreciation of machines, resulting in an average machine life higher than 10 years. The final conclusions were that the costs were above the paid values for the services, when computed the depreciation and capital remuneration, with negative results In the financial analyzes of three companies. Finally, the mechanization process increased the workers life quality, however, the annual income was around US$ 2,112.00 per worker, approximately 39% lower than the average Brazilian population.

VALOR ECONÔMICO AGREGADO POR HOSPITAIS UNIVERSITÁRIOS PÚBLICOS

The increasing participation of the society in the decision-making process related to public politics stimulates public administration in Brazil to search for mechanisms to demonstrate efficiency and disclosure in resource application. The main objective of this work is to calculate the economic value added to the society by Public University Hospitals. Therefore, a Public University Hospital case study has been carried out and its economic performance evaluated during a period of three years. This study has shown that the economic value added to the society in the long term by the entity is positive. The proposed value measurement has indicated that the society is getting a superior return from the opportunity costs of capital invested, that is, the hospital is constructing economic value and consequently contributing to the social welfare.