Pushing the Quality Level in Networked News Business: Semantic-Based Content Retrieval and Composition in International News Publishing

Electronic publishing exploits numerous possibilities to present or exchange information and to communicate via most current media like the Internet. By utilizing modern Web technologies like Web Services, loosely coupled services, and peer-to-peer networks we describe the integration of an intelligent business news presentation and distribution network. Employing semantics technologies enables the coupling of multinational and multilingual business news data on a scalable international level and thus introduce a service quality that is not achieved by alternative technologies in the news distribution area so far. Architecturally, we identified the loose coupling of existing services as the most feasible way to address multinational and multilingual news presentation and distribution networks. Furthermore we semantically enrich multinational news contents by relating them using AI techniques like the Vector Space Model. Summarizing our experiences we describe the technical integration of semantics and communication technologies in order to create a modern international news network.

The impact of coordination on the effectiveness of last mile relief distribution

Last mile relief distribution is the final stage of humanitarian logistics. It refers to the supply of relief items from local distribution centers to the disaster affected people (Balcik et al., 2008). In the last mile relief distribution literature, researchers have focused on the use of optimisation techniques for determining the exact optimal solution (Liberatore et al., 2014), but there is a need to include behavioural factors with those optimisation techniques in order to obtain better predictive results. This paper will explain how improving the coordination factor increases the effectiveness of the last mile relief distribution process. There are two stages of methodology used to achieve the goal: Interviews: The authors conducted interviews with the Indian Government and with South Asian NGOs to identify the critical factors for final relief distribution. After thematic and content analysis of the interviews and the reports, the authors found some behavioural factors which affect the final relief distribution. Model building: Last mile relief distribution in India follows a specific framework described in the Indian Government disaster management handbook. We modelled this framework using agent based simulation and investigated the impact of coordination on effectiveness. We define effectiveness as the speed and accuracy with which aid is delivered to affected people. We tested through simulation modelling whether coordination improves effectiveness.

Ergodic Rates of the Fast Rayleigh Fading Relay Channel for Different Cooperative Strategies

ACM Computing Classification System (1998): E.4, C.2.1.

Regression games

The solution of a TU cooperative game can be a distribution of the value of the grand coalition, i.e. it can be a distribution of the payo (utility) all the players together achieve. In a regression model, the evaluation of the explanatory variables can be a distribution of the overall t, i.e. the t of the model every regressor variable is involved. Furthermore, we can take regression models as TU cooperative games where the explanatory (regressor) variables are the players. In this paper we introduce the class of regression games, characterize it and apply the Shapley value to evaluating the explanatory variables in regression models. In order to support our approach we consider Young (1985)'s axiomatization of the Shapley value, and conclude that the Shapley value is a reasonable tool to evaluate the explanatory variables of regression models.

Benefits of a marketing cooperative in transition agriculture: Mórakert purchasing and service co-operative

The paper analyses the potential benefits of marketing cooperatives in Hungary, employing a transaction cost economics framework. We found that the purchased quantity, the existence of contracts, flexibility and trust are the most important factors farmers consider when selling their products via a cooperative. The most striking result is that diversification has positive influences on the share of cooperatives in farmers’ sale. Furthermore, farmers with larger bargaining power have less willingness to sell their product to the cooperative. Surprisingly, asset specificity has rather negative effects on the share of cooperatives in members’ sales.

The spectral distribution of biologically active solar radiation at Miami, Florida, USA

The spectral distribution of solar radiation was studied under different sky conditions during a 15- month period in Miami, Florida (USA), and over a latitudinal gradient at solar maximum. Spectroradiometric scans were characterized for total irradiance (300- 3000 nm) and the relative energetic and photon contributions of the following wavelength regions: UV-B (300-320nm); UV-A (320-400nm); B (400-500rim); PAR (400-700 nm); R (600-700 nm); and FR (728- 732 rim). Notable results include: (i) significantly higher UV-A energy fluxes than currently in use for laboratory experiments involving the biological effects of this bandwidth (values ranged from 33.6 to 55.4 W/m 2 in Miami over the year); (ii) marked diurnal shifts in B:R and R:FR, with elevated R:FR values in early morning: (iii) a strong correlation between R: FR and atmospheric water content; and (iv) unusually high PAR values under direct sunlight with cloudy skies (2484 ~tmot/2 per s).

Effects of cooperative and individual integrated learning system on attitudes and achievement in mathematics

This study compares the effects of cooperative delivery (CD) and individual delivery (ID) of integrated learning system (ILS) instruction in mathematics on achievement, attitudes and behaviors in adult (16-21 yrs.) high school students (grades 9-13). The study was conducted in an urban adult high school in Miami-Dade County Public Schools using a pre-test/post-test design. Achievement was measured using the Test of Adult Basic Education (TABE) by CTB MC-Graw-Hill and Compass Learning. An attitudinal survey measured attitudes towards mathematics, the computer-related lessons, and attitudes toward group activities. Behavior was assessed using computer lab observations. ^ Two-way analyses of variance (ANOVA) were conducted on achievement (TABE and Compass) by group and time (pre and post). A one-way ANOVA was conducted on the overall attitude by group on the five components (i.e., content mathematics, delivery/computers, cooperative, partners, and self efficacy) and a one-way ANOVA was conducted on the on-task behavior by group. ^ The results of the study revealed that CD and ID students working on mathematics activities delivered by the ILS performed similarly on achievement tests of the TABE. The CD-ILS students had significantly better overall mathematics attitudes than the ID-ILS students and the ID-ILS group was on-task significantly more than the CD-ILS group. This study concludes that regularity and period of time over which the ILS is used may prove to be important variables although there were insufficient data to fully investigate the impact of models of use. Additionally, a minimum amount of time-on-system is necessary before gains can become apparent in innumeracy and increasing exposure to the system may have beneficial effects on learning. ^

Plasma and cold sprayed aluminum carbon nanotube composites: Quantification of nanotube distribution and multi-scale mechanical properties

Carbon nanotubes (CNT) could serve as potential reinforcement for metal matrix composites for improved mechanical properties. However dispersion of carbon nanotubes (CNT) in the matrix has been a longstanding problem, since they tend to form clusters to minimize their surface area. The aim of this study was to use plasma and cold spraying techniques to synthesize CNT reinforced aluminum composite with improved dispersion and to quantify the degree of CNT dispersion as it influences the mechanical properties. Novel method of spray drying was used to disperse CNTs in Al-12 wt.% Si prealloyed powder, which was used as feedstock for plasma and cold spraying. A new method for quantification of CNT distribution was developed. Two parameters for CNT dispersion quantification, namely Dispersion parameter (DP) and Clustering Parameter (CP) have been proposed based on the image analysis and distance between the centers of CNTs. Nanomechanical properties were correlated with the dispersion of CNTs in the microstructure. Coating microstructure evolution has been discussed in terms of splat formation, deformation and damage of CNTs and CNT/matrix interface. Effect of Si and CNT content on the reaction at CNT/matrix interface was thermodynamically and kinetically studied. A pseudo phase diagram was computed which predicts the interfacial carbide for reaction between CNT and Al-Si alloy at processing temperature. Kinetic aspects showed that Al4C3 forms with Al-12 wt.% Si alloy while SiC forms with Al-23wt.% Si alloy. Mechanical properties at nano, micro and macro-scale were evaluated using nanoindentation and nanoscratch, microindentation and bulk tensile testing respectively. Nano and micro-scale mechanical properties (elastic modulus, hardness and yield strength) displayed improvement whereas macro-scale mechanical properties were poor. The inversion of the mechanical properties at different scale length was attributed to the porosity, CNT clustering, CNT-splat adhesion and Al 4C3 formation at the CNT/matrix interface. The Dispersion parameter (DP) was more sensitive than Clustering parameter (CP) in measuring degree of CNT distribution in the matrix.

Multifunctional nanoparticles in cancer: In vitro characterization, in vivo distribution, and cellular response after laser-NIR dye-induced heating

A novel biocompatible and biodegradable polymer, termed poly(Glycerol malate co-dodecanedioate) (PGMD), was prepared by thermal condensation method and used for fabrication of nanoparticles (NPs). PGMD NPs were prepared using the single oil emulsion technique and loaded with an imaging/hyperthermia agent (IR820) and a chemotherapeutic agent (doxorubicin, DOX). The size of the void PGMD NPs, IR820-PGMD NPs and DOX-IR820-PGMD NPs were approximately 90 nm, 110 nm, and 125 nm respectively. An acidic environment (pH=5.0) induced higher DOX and IR820 release compared to pH=7.4. DOX release was also enhanced by exposure to laser, which increased the temperature to 42°C. Cytotoxicity of DOX-IR820-PGMD NPs was comparable in MES-SA but was higher in Dx5 cells compared to free DOX plus IR820 (p<0.05). The combination of hyperthermia (HT) and chemotherapy improved cytotoxicity in both cell lines. We also explored the cellular response after rapid, short-term and low thermal dose (laser/Dye/NP) induced-heating, and compared it to slow, long-term and high thermal dose cell incubator heating by investigating the reactive oxygen species (ROS) level, hypoxia-inducible factor-1&agr; (HIF-1&agr;) and vascular endothelial growth factor (VEGF) expression. The cytotoxicity of IR820-PGMD NPs after laser/Dye/NP HT resulted in higher cancer cell killing compared to incubator HT. ROS level, HIF-1&agr; and VEGF expression were elevated under incubator HT, while maintained at the baseline level under the laser/Dye/NP HT. In vivo mouse studies showed that NP formulation significantly improved the plasma half-life of IR820 after tail vein injection. Significant lower IR820 content was observed in kidney in DOX-IR820-PGMD NP treatment as compared to free IR820 treatment in our biodistribution studies (p<0.05). In conclusion, both IR820-PGMD NPs and DOX-IR820-PGMD NPs were successfully developed and used for both imaging and therapeutic purposes. Rapid and short-term laser/Dye/NP HT, with a low thermal dose, did not up-regulate HIF-1&agr; and VEGF expression, whereas slow and long-term incubator HT, with a high thermal dose, can enhance expression of both HIF-1&agr; and VEGF.^

Plasma And Cold Sprayed Aluminum Carbon Nanotube Composites: Quantification Of Nanotube Distribution And Multi-Scale Mechanical Properties

Carbon nanotubes (CNT) could serve as potential reinforcement for metal matrix composites for improved mechanical properties. However dispersion of carbon nanotubes (CNT) in the matrix has been a longstanding problem, since they tend to form clusters to minimize their surface area. The aim of this study was to use plasma and cold spraying techniques to synthesize CNT reinforced aluminum composite with improved dispersion and to quantify the degree of CNT dispersion as it influences the mechanical properties. Novel method of spray drying was used to disperse CNTs in Al-12 wt.% Si pre-alloyed powder, which was used as feedstock for plasma and cold spraying. A new method for quantification of CNT distribution was developed. Two parameters for CNT dispersion quantification, namely Dispersion parameter (DP) and Clustering Parameter (CP) have been proposed based on the image analysis and distance between the centers of CNTs. Nanomechanical properties were correlated with the dispersion of CNTs in the microstructure. Coating microstructure evolution has been discussed in terms of splat formation, deformation and damage of CNTs and CNT/matrix interface. Effect of Si and CNT content on the reaction at CNT/matrix interface was thermodynamically and kinetically studied. A pseudo phase diagram was computed which predicts the interfacial carbide for reaction between CNT and Al-Si alloy at processing temperature. Kinetic aspects showed that Al4C3 forms with Al-12 wt.% Si alloy while SiC forms with Al-23wt.% Si alloy. Mechanical properties at nano, micro and macro-scale were evaluated using nanoindentation and nanoscratch, microindentation and bulk tensile testing respectively. Nano and micro-scale mechanical properties (elastic modulus, hardness and yield strength) displayed improvement whereas macro-scale mechanical properties were poor. The inversion of the mechanical properties at different scale length was attributed to the porosity, CNT clustering, CNT-splat adhesion and Al4C3 formation at the CNT/matrix interface. The Dispersion parameter (DP) was more sensitive than Clustering parameter (CP) in measuring degree of CNT distribution in the matrix.

(Table 4+5, Page 290) Distribution of Mn, Fe, Cu. Pb, Zn, Ni and Co in single manganese nodules

Chemical analyses of manganese nodules from the Central Pacific Basin show that their chemical composition varies regionally, although that of the associated sediments is markedly uniform throughout the basin. Mn content varies from 16 to 32% in average. Its higher value is generally found in nodules from siliceous clay and a few from deep-sea clay. Fe content tends to enrich in nodules from deep-sea clay area. Most manganese nodules, except those from deep-sea clay, are remarkably depleted in Fe compared with ones from the other Pacific regions. Mostly, Cu and Ni contents exceed 1% in nodules from siliceous clay, and decrease towards the northwest of the basin where deep-sea clay is distributed. The inter-element relationship between manganese nodules and associated sediments suggests that the mechanism of incorporation of major and minor elements in nodules is apparently different from that of the associated sediments. This finding seems to provide a new interpretation on the problem why manganese nodules having low accumulation rate are not buried by the associated sediments with greater sedimentation rate and then occur on sediment-seawater interface.

Distribution of Upper Cretaceous deep water agglutinated foraminifera in sediments of the North Atlantic and its marginal seas (Tab. 1)

The stratigraphic and biogeographic distribution of more than 170 species of deep-water agglutinated benthic foraminifers (DWAF) from the North Atlantic and adjacent marginal seas has been compared with paleoenvironmental data (e.g. paleobathymetry, oxygenation of the bottom waters, amount of terrigenous input and substrate disturbance). Six general types of assemblages, in which deep water agglutinated taxa occur, are defined from the Turonian to Maastrichtian times: 1. High latitude slope assemblages 2. Low to mid latitude slope assemblages 3. Flysch-type assemblages 4. Deep water limestone assemblages (,,Scaglia,,-type) 5. Abyssal mixed calcareous-agglutinated assemblages 6. Abyssal purely agglutinated assemblages Latitudinal differences in faunal composition are observed, the most important of which is the lack or extreme paucity of calcareous forms in high latitude assemblages. East-to-west differences appear to be of comparatively minor importance. Most DWAF species occur in all studied regions and are thus considered as cosmopolitan. Biostratigraphic turnovers in the taxonomic content of assemblages are observed in the lowermost Turonian, mid-Campanian and in the upper Maastrichtian to lowermost Paleocene. These datum levels correspond to inter-regional and time-constant paleooceanographic events, which probably also affected the deep-water benthic biota. This allows us to use deep-water agglutinated foraminifers for biostratigraphy in the North Atlantic sequences deposited below CCD and to geographically extend the currently used zonal schemes which have been established in the Carpathian and Alpine areas.

(Appendix A) Pigment content, microbial biomass and activity, and grain size characteristics in caged and control sites of the Arctic long-term observatory HAUSGARTEN

Present theories of deep-sea community organization recognize the importance of small-scale biological disturbances, originated partly from the activities of epibenthic megafaunal organisms, in maintaining high benthic biodiversity in the deep sea. However, due to technical difficulties, in situ experimental studies to test hypotheses in the deep sea are lacking. The objective of the present study was to evaluate the potential of cages as tools for studying the importance of epibenthic megafauna for deep-sea benthic communities. Using the deep-diving Remotely Operated Vehicle (ROV) "VICTOR 6000", six experimental cages were deployed at the sea floor at 2500 m water depth and sampled after 2 years (2y) and 4 years (4y) for a variety of sediment parameters in order to test for caging artefacts. Photo and video footage from both experiments showed that the cages were efficient at excluding the targeted fauna. The cage also proved to be appropriate to deep-sea studies considering the fact that there was no fouling on the cages and no evidence of any organism establishing residence on or adjacent to it. Environmental changes inside the cages were dependent on the experimental period analysed. In the 4y experiment, chlorophyll a concentrations were higher in the uppermost centimeter of sediment inside cages whereas in the 2y experiment, it did not differ between inside and outside. Although the cages caused some changes to the sedimentary regime, they are relatively minor compared to similar studies in shallow water. The only parameter that was significantly higher under cages at both experiments was the concentration of phaeopigments. Since the epibenthic megafauna at our study site can potentially affect phytodetritus distribution and availability at the seafloor (e.g. via consumption, disaggregation and burial), we suggest that their exclusion was, at least in part, responsible for the increases in pigment concentrations. Cages might be suitable tools to study the long-term effects of disturbances caused by megafaunal organisms on the diversity and community structure of smaller-sized organisms in the deep sea, although further work employing partial cage controls, greater replication, and evaluating faunal components will be essential to unequivocally establish their utility.

Water temperature, salinity, DOC content and THNS concentration in samples taken during POLARSTERN cruise to the Fram Strait and Greenland Sea

Dissolved organic matter (DOM) was isolated with XAD-2 and 4 resins from different water masses of the Greenland Sea and Fram Strait. The contribution of XAD-extractable dissolved organic carbon (DOC), operationally defined as 'recalcitrant' or humic substances, to total DOC was in the range of 45 ± 9% in surface waters and 60 ± 6% in deep waters. The carbohydrate concentration and composition were determined using the l-tryptophan/sulfuric acid method (for the bulk carbohydrate concentration, TCHO) and high performance anion-exchange chromatography after sulfuric acid hydrolysis (for the distribution of total hydrolysable neutral sugars, THNS). Carbohydrates contributed up to 6.8% to both total and recalcitrant DOC. TCHO contribution to total DOC decreased with depth from on average 4.1 ± 1.2% in surface waters to 2.2 ± 1.0% in deep waters, whereas the THNS contribution was similar in both layers, accounting for 2.5 ± 1.6% (surface) and 2.4 ± 0.2% (at depth). TCHO contribution to XAD-extractable DOC also decreased with depth from 4.5 ± 1.7% to 2.1 ± 1.0%, whereas THNS contribution was almost constant, with yields of 0.5 ± 0.3% for surface samples and 0.6 ± 0.1% at depth. The molecular size distribution of the recalcitrant DOM showed for all fractions a clear trend towards small molecules in the deep sea. More than half of the XAD-extractable carbohydrates of surface samples and more than 70% of deep sea samples were found in the nonpolar fraction from XAD, which was eluted with methanol. Glucose was the dominant carbohydrate in the surface water samples, whereas in the deep sea the composition was more uniform. In the XAD extracts, the compositions were less variable than in the original samples. The neutral sugar composition, in particular glucose and the deoxysugars, is indicative of the diagenetic state of the extracted DOM. The molar ratio (fucose + rhamnose)/(arabinose + xylose) was lowest for deep sea extractable DOM, indicating a high contribution of material modified by microorganisms. The THNS composition and distribution reveal that "recalcitrant" carbohydrates are heteropolysaccharides, carbohydrate units incorporated into a framework of a highly nonpolar structure with a lack of functional groups.