Effective compression ratio-A new measurement of the quality of thorax compression during CPR

PURPOSE: Computer-based feedback systems for assessing the quality of cardiopulmonary resuscitation (CPR) are widely used these days. Recordings usually involve compression and ventilation dependent variables. Thorax compression depth, sufficient decompression and correct hand position are displayed but interpreted independently of one another. We aimed to generate a parameter, which represents all the combined relevant parameters of compression to provide a rapid assessment of the quality of chest compression-the effective compression ratio (ECR). METHODS: The following parameters were used to determine the ECR: compression depth, correct hand position, correct decompression and the proportion of time used for chest compressions compared to the total time spent on CPR. Based on the ERC guidelines, we calculated that guideline compliant CPR (30:2) has a minimum ECR of 0.79. To calculate the ECR, we expanded the previously described software solution. In order to demonstrate the usefulness of the new ECR-parameter, we first performed a PubMed search for studies that included correct compression and no-flow time, after which we calculated the new parameter, the ECR. RESULTS: The PubMed search revealed 9 trials. Calculated ECR values ranged between 0.03 (for basic life support [BLS] study, two helpers, no feedback) and 0.67 (BLS with feedback from the 6th minute). CONCLUSION: ECR enables rapid, meaningful assessment of CPR and simplifies the comparability of studies as well as the individual performance of trainees. The structure of the software solution allows it to be easily adapted to any manikin, CPR feedback devices and different resuscitation guidelines (e.g. ILCOR, ERC).

Investigating the Role of System Justification in Mental Illness Stigma

The current study integrates system justification theory with research on mental illness stigma. Stereotypes of both low- and high-status groups in society can be a means of satisfying the system justification motive, or the motive to view societal inequalities as justified (as reviewed in Jost, Banaji, & Nosek, 2004). Corrigan, Watson, and Ottati (2003) proposed that system justification theory may be able to explain the origins of particular stereotypes of people with mental illness, such as dangerousness and incompetence. The primary goal of the present study was to investigate whether the stigmatization of people with mental illness – a specific form of stigmatization of a lowstatus group – can be at least partially attributed to a broader motive to justify societal inequalities. To test this, the current study included both an experimental manipulation of the perceived legitimacy of the social system and a measure of system-justifying beliefs. Stigmatization of individuals with mental illness was measured with both explicit selfreport measures (semantic differentials and the Attribution Questionnaire) and an implicit measure (a computer-based Implicit Association Test). The relationships between participant characteristics, such as personal experience with mental illness, and stigma were also investigated. Consistent with past research demonstrating only modest correlations between explicit and implicit stigma, greater self-reported fear toward a person with a chronic mental illness was weakly associated with increased implicit bias against mental illness in favor of physical disability. There was little support for the involvement of system justification in explicit stigma. Participants with personal experience with mental illness were less likely to self-report fear and avoidance of a person with a chronic mental illness. These findings have implications for stigmareduction efforts.

Huntington's like conditions in China, A review of published Chinese cases

Background: Knowledge about HD in China is lacking in the international literature. We have therefore analyzed the Chinese literature to thoroughly explore the clinical characteristics of Huntington disease in China. Methods: A computer-based online search of China National Knowledge Infrastructure was performed to review case reports concerning HD published between January 1980 and April of 2011, and the clinical characteristics were extracted. Results: A total of 92 studies involving 279 patients (157 males and 122 females) were collected, 82.0% of which were from provinces of North China. Most of the cases (97.8%) had a family history of HD, and paternal inheritance (65.5%) was higher than maternal inheritance (34.5%). Onset age was 35.8 (± 11.8) years, death occurred with 45.6 (± 13.5) years after a course of 11.6 (± 5.6) years. Involuntary movements were the most frequent reported presentation (found in 52.3%, including 64.4% in the entire body, 19.8% in the upper limbs, and 13.7% in the head and face). Psychiatric symptoms at onset were reported in 16.1%, and cognitive impairment in 1.8%. With disease progression, 99.6% of patients had abnormal movements, 67.9% cognitive impairment, and 35.0% suffered psychiatric symptoms. Of the reported patients, only 22 underwent IT15 gene testing with positive results. Conclusion: HD is a well-reported entity in Chinese medical literature, however, only a small number of instances have been proven by molecular diagnosis. Most of the features resemble what is known in other countries. The highly predominant motor presentation, and the higher male prevalence as well as the apparent concentration in Northern China may be due to observational bias. There is therefore a need to prospectively examine cohorts of patients with appropriate comprehensive assessment tools including genetic testing.

Visual histological grading system for the evaluation of in vitro-generated neocartilage

Here we present the development of a visual evaluation system for routine assessment of in vitro-engineered cartilaginous tissue. Neocartilage was produced by culturing human articular chondrocytes in pellet culture systems or in a scaffold-free bioreactor system. All engineered tissues were embedded in paraffin and were sectioned and stained with Safranin O-fast green. The evaluation of each sample was broken into 3 categories (uniformity and intensity of Safranin O stain, distance between cells/amount of matrix produced, and cell morphology), and each category had 4 components with a score ranging from 0 to 3. Three observers evaluated each sample, and the new system was independently tested against an objective computer-based histomorphometry system. Pellets were also assessed biochemically for glycosaminoglycan (GAG) content. Pellet histology scores correlated significantly with GAG contents and were in agreement with the computer-based histomorphometry system. This system allows a valid and rapid assessment of in vitro-generated cartilaginous tissue that has a relevant association with objective parameters indicative of cartilage quality.

Facial affect recognition training in autism: can we animate the fusiform gyrus?

One of the most consistent findings in the neuroscience of autism is hypoactivation of the fusiform gyrus (FG) during face processing. In this study the authors examined whether successful facial affect recognition training is associated with an increased activation of the FG in autism. The effect of a computer-based program to teach facial affect identification was examined in 10 individuals with high-functioning autism. Blood oxygenation level-dependent (BOLD) functional magnetic resonance imaging (fMRI) changes in the FG and other regions of interest, as well as behavioral facial affect recognition measures, were assessed pre- and posttraining. No significant activation changes in the FG were observed. Trained participants showed behavioral improvements, which were accompanied by higher BOLD fMRI signals in the superior parietal lobule and maintained activation in the right medial occipital gyrus.

Potential of information technology in dental education

The use of information technology (IT) in dentistry is far ranging. In order to produce a working document for the dental educator, this paper focuses on those methods where IT can assist in the education and competence development of dental students and dentists (e.g. e-learning, distance learning, simulations and computer-based assessment). Web pages and other information-gathering devices have become an essential part of our daily life, as they provide extensive information on all aspects of our society. This is mirrored in dental education where there are many different tools available, as listed in this report. IT offers added value to traditional teaching methods and examples are provided. In spite of the continuing debate on the learning effectiveness of e-learning applications, students request such approaches as an adjunct to the traditional delivery of learning materials. Faculty require support to enable them to effectively use the technology to the benefit of their students. This support should be provided by the institution and it is suggested that, where possible, institutions should appoint an e-learning champion with good interpersonal skills to support and encourage faculty change. From a global prospective, all students and faculty should have access to e-learning tools. This report encourages open access to e-learning material, platforms and programs. The quality of such learning materials must have well defined learning objectives and involve peer review to ensure content validity, accuracy, currency, the use of evidence-based data and the use of best practices. To ensure that the developers' intellectual rights are protected, the original content needs to be secure from unauthorized changes. Strategies and recommendations on how to improve the quality of e-learning are outlined. In the area of assessment, traditional examination schemes can be enriched by IT, whilst the Internet can provide many innovative approaches. Future trends in IT will evolve around improved uptake and access facilitated by the technology (hardware and software). The use of Web 2.0 shows considerable promise and this may have implications on a global level. For example, the one-laptop-per-child project is the best example of what Web 2.0 can do: minimal use of hardware to maximize use of the Internet structure. In essence, simple technology can overcome many of the barriers to learning. IT will always remain exciting, as it is always changing and the users, whether dental students, educators or patients are like chameleons adapting to the ever-changing landscape.

A study of acoustic emission technique for concrete damage detection

The Acoustic emission (AE) technique, as one of non-intrusive and nondestructive evaluation techniques, acquires and analyzes the signals emitting from deformation or fracture of materials/structures under service loading. The AE technique has been successfully applied in damage detection in various materials such as metal, alloy, concrete, polymers and other composite materials. In this study, the AE technique was used for detecting crack behavior within concrete specimens under mechanical and environmental frost loadings. The instrumentations of the AE system used in this study include a low-frequency AE sensor, a computer-based data acquisition device and a preamplifier linking the AE sensor and the data acquisition device. The AE system purchased from Mistras Group was used in this study. The AE technique was applied to detect damage with the following laboratory tests: the pencil lead test, the mechanical three-point single-edge notched beam bending (SEB) test, and the freeze-thaw damage test. Firstly, the pencil lead test was conducted to verify the attenuation phenomenon of AE signals through concrete materials. The value of attenuation was also quantified. Also, the obtained signals indicated that this AE system was properly setup to detect damage in concrete. Secondly, the SEB test with lab-prepared concrete beam was conducted by employing Mechanical Testing System (MTS) and AE system. The cumulative AE events and the measured loading curves, which both used the crack-tip open displacement (CTOD) as the horizontal coordinate, were plotted. It was found that the detected AE events were qualitatively correlated with the global force-displacement behavior of the specimen. The Weibull distribution was vii proposed to quantitatively describe the rupture probability density function. The linear regression analysis was conducted to calibrate the Weibull distribution parameters with detected AE signals and to predict the rupture probability as a function of CTOD for the specimen. Finally, the controlled concrete freeze-thaw cyclic tests were designed and the AE technique was planned to investigate the internal frost damage process of concrete specimens.

A posteriori registration and subtraction of panoramic compared with intraoral radiography

OBJECTIVES: To demonstrate the feasibility of panoramic image subtraction for implant assessment. STUDY DESIGN: Three titanium implants were inserted into a fresh pig mandible. One intraoral and 2 panoramic images were obtained at baseline and after each of 6 incremental (0.3, 0.6, 1.0, 1.5, 2.0, 2.5 mm) removals of bone. For each incremental removal of bone, the mandible was removed from and replaced in the holding device. Images representing incremental bone removals were registered by computer with the baseline images and subtracted. Assessment of the subtraction images was based on visual inspection and analysis of structured noise. RESULTS: Incremental bone removals were more visible in intraoral than in panoramic subtraction images; however, computer-based registration of panoramic images reduced the structured noise and enhanced the visibility of incremental removals. CONCLUSION: The feasibility of panoramic image subtraction for implant assessment was demonstrated.

Index of Complexity, Outcome and Need scored on plaster and digital models

The aim of this study was to compare standard plaster models with their digital counterparts for the applicability of the Index of Complexity, Outcome, and Need (ICON). Generated study models of 30 randomly selected patients: 30 pre- (T(0)) and 30 post- (T(1)) treatment. Two examiners, calibrated in the ICON, scored the digital and plaster models. The overall ICON scores were evaluated for reliability and reproducibility using kappa statistics and reliability coefficients. The values for reliability of the total and weighted ICON scores were generally high for the T(0) sample (range 0.83-0.95) but less high for the T(1) sample (range 0.55-0.85). Differences in total ICON score between plaster and digital models resulted in mostly statistically insignificant values (P values ranging from 0.07 to 0.19), except for observer 1 in the T(1) sample. No statistically different values were found for the total ICON score on either plaster or digital models. ICON scores performed on computer-based models appear to be as accurate and reliable as ICON scores on plaster models.

E-Portfolios als Instrument zur Professionalisierung in der Lehrer- und Lehrerinnenausbildung

E-Portfolios haben in den letzten Jahren große Aufmerksamkeit in der aktuellen pädagogischen Fachdiskussion erfahren und können als einer der wesentlichen Trends bezeichnet werden. Mit der Bologna-konformen Überarbeitung der Lehrpläne an Hochschulen und Universitäten und der Ausrichtung de Studien an Kompetenzen (Outcome- statt Input-Orientierung) bzw. Lernerzentrierung haben immer mehr E-Portfolios den Eingang in die Curricula verschiendenster Aus- und Weiterbildungsstudien gefunden. Dieses Buch beschreibt die Arbeit mit E-Portfolios in der schulpraktischen Hochschulausbildung von Lehrerinnen und Lehrern mit dem Ziel, motivationale und technologische Faktoren der Nutzung von E-Portfolios durch Studierende zu bewerten und E-Portfolios sowohl als Werkzeug als auch als Methode in der Pädagogen- und Pädagoginnenbildung weiterzuentwickeln.

Dezentrale selbstorganisierte Grobplanung von Intralogistiksystemen mit Hilfe eines Software-Agentensystems

In diesem Beitrag wird eine dezentral aufgebaute und auf Selbstorganisation basierende Methodik zur Grobplanung von Intralogistiksystemen thematisiert. Diese Methodik sieht eine Kombination des Wissenschaftsgebiets der Agentensysteme aus der Informatik mit der Materialflussplanung vor. Dieser Artikel leistet somit einen Beitrag für die Entwicklung eines intelligenten, rechnergestützten Assistenzsystems zur Planung intralogistischer Systeme.