Molecular role of Cx37 in advanced atherosclerosis: a micro-array study.

Recently, we showed that connexin37 (Cx37) protects against early atherosclerotic lesion development by regulating monocyte adhesion. The expression of this gap junction protein is altered in mouse and human atherosclerotic lesions; it is increased in macrophages newly recruited to the lesions and disappears from the endothelium of advanced plaques. To obtain more insight into the molecular role of Cx37 in advanced atherosclerosis, we used micro-array analysis for gene expression profiling in aortas of ApoE(-/-) and Cx37(-/-)ApoE(-/-) mice before and after 18 weeks of cholesterol-rich diet. Out of >15,000 genes, 106 genes were significantly differentially expressed in young mice before diet (P-value of <0.05, fold change of >0.7 or <-0.7, and intensity value >2.2 times background). Ingenuity pathway analysis (IPA) revealed differences in genes involved in cell-to-cell signaling and interaction, cellular compromise and nutritional disease. In addition, we identified 100 genes that were significantly perturbed after the cholesterol-rich diet. Similar to the analysis on 10-week-old mice, IPA revealed differences in genes involved in cell-to-cell signaling and interaction as well as to immuno-inflammatory disease. Furthermore, we found important changes in genes involved in vascular calcification and matrix degradation, some of which were confirmed at protein level by (immuno-)histochemistry. In conclusion, we suggest that Cx37 deficiency alters the global differential gene expression profiles in young mice towards a pro-inflammatory phenotype, which are then further influenced in advanced atherosclerosis. The results provide new insights into the significance of Cx37 in plaque calcification.

Management of the risk of HIV infection in male homosexual couples.

OBJECTIVES: To study the ways of managing HIV risk within male homosexual steady relationships (gay couples), including factors associated with consistent condom use during anal sex with the steady partner.¦METHOD: An anonymous and standardized questionnaire completed by a convenience sample of homosexuals in Switzerland in 1997 (n = 1097). Information on the couple was provided by the 74% (n = 786) of male respondents who reported having a steady partner in the past 12 months. Data were analysed by contingency tables and logistic regression.¦RESULTS: Different ways of managing HIV risk were reported: negotiated safety (both HIV negative, condoms abandoned) was chosen by one quarter of the couples, but the most frequent solution was reliance on condoms for anal sex, chosen by more than four in 10. Altogether 84% of couples exhibited safe management of HIV risk within their partnership. The 16% of couples showing inadequate management of HIV risk within the couple mostly relied on questionable assumptions about past or present risks. A total of 74% of couples had spoken about managing HIV risk with possible casual partners. Reported behaviour with the steady partner and with casual partners was highly consistent with claimed strategies chosen to manage HIV risk. Consistent condom use with the steady partner was mostly associated with variables characterizing the relationship: initial 2 years of the relationship, discordant or unknown serological HIV status, non-exclusivity.¦CONCLUSION: Gay couples manage HIV risk in a variety of ways. Most strategies provide adequate protection with casual partners, but leave gaps in protection between the steady partners themselves.

Cytochrome P450 1A2 activity and inducibility: impact of smoking, smoking cessation and genetic polymorphisms

Aims: Cytochrome P4501A2 (CYP1A2) is involved in the metabolism of severaldrugs (clozapine, olanzapine, theopylline, caffeine, etc) and is induced by smoking.This can result in decreased plasma levels of drugs metabolized by thisisoenzyme, causing a decrease in therapeutic response. After quitting smoking,increased plasma levels can lead to adverse effects of the concerned drugs, such asconfusion and seizures, described under clozapine treatment. The present studyaimed to examine the variation of CYP1A2 activity in a large group of smokersbefore and after smoking cessation. Moreover, we aimed to determine whethergenetic polymorphisms of CYP1A2 gene could influence the inducibility ofCYP1A2. Methods: CYP1A2 activity was determined by the paraxanthine/caffeineratio in 194 smokers and in 118 of them being abstinent during a 4-weekperiod. Participants were genotyped for CYP1A2*1F (rs762551), *1D(rs35694136) and *1C (rs2069514) polymorphisms. Results: Smokers had higherCYP1A2 activity (1.55-fold; p < 0.0001). Individual change of CYP1A2 activityafter smoking cessation ranged from 1.0-fold (no change) to 7.3-fold decreasedactivity. In five participants with low initial CYP1A2 activity, an increase wasobserved after smoking cessation. During smoking, CYP1A2*1F (p = 0.005), CYP1A2*1D (p = 0.014), the number of cigarettes/day (p = 0.012), contraceptives use(p < 0.001) and - 163A/- 2467T/- 3860G haplotype (p = 0.002) influencedCYP1A2 activity, while after quitting smoking, CYP1A2*1F (p = 0.017) and contraceptives(p = 0.05) did. No influence of CYP1A2 polymorphisms on the inducibilityof CYP1A2 was observed. Conclusion: Higher CYP1A2 activity wasmeasured in smokers, but with a large interindividual variability of its inductionby smoking. Careful clinical management with the help of therapeutic drug monitoringis therefore needed for patients receiving drugs which are metabolized byCYP1A2, who stop or start smoking. Unidentified genetic variations in theCYP1A2 gene and/or in other genes controlling CYP1A2 activity and other environmentalfactors could be responsible of the observed differences in CYP1A2enzymatic activity and inducibility.

The influence of learning on evolution: a mathematical framework.

The Baldwin effect can be observed if phenotypic learning influences the evolutionary fitness of individuals, which can in turn accelerate or decelerate evolutionary change. Evidence for both learning-induced acceleration and deceleration can be found in the literature. Although the results for both outcomes were supported by specific mathematical or simulation models, no general predictions have been achieved so far. Here we propose a general framework to predict whether evolution benefits from learning or not. It is formulated in terms of the gain function, which quantifies the proportional change of fitness due to learning depending on the genotype value. With an inductive proof we show that a positive gain-function derivative implies that learning accelerates evolution, and a negative one implies deceleration under the condition that the population is distributed on a monotonic part of the fitness landscape. We show that the gain-function framework explains the results of several specific simulation models. We also use the gain-function framework to shed some light on the results of a recent biological experiment with fruit flies.

TECTONICS OF THE HELVETIC NAPPE SYSTEM (W SWITZERLAND): CONTROL OF STRAIN LOCALIZATION AND BASEMENT-COVER DEFORMATION. Insights from models based on continuum mechanics

The Helvetic nappe system in Western Switzerland is a stack of fold nappes and thrust sheets em-placed at low grade metamorphism. Fold nappes and thrust sheets are also some of the most common features in orogens. Fold nappes are kilometer scaled recumbent folds which feature a weakly deformed normal limb and an intensely deformed overturned limb. Thrust sheets on the other hand are characterized by the absence of overturned limb and can be defined as almost rigid blocks of crust that are displaced sub-horizontally over up to several tens of kilometers. The Morcles and Doldenhom nappe are classic examples of fold nappes and constitute the so-called infra-Helvetic complex in Western and Central Switzerland, respectively. This complex is overridden by thrust sheets such as the Diablerets and Wildhörn nappes in Western Switzerland. One of the most famous example of thrust sheets worldwide is the Glariis thrust sheet in Central Switzerland which features over 35 kilometers of thrusting which are accommodated by a ~1 m thick shear zone. Since the works of the early Alpine geologist such as Heim and Lugeon, the knowledge of these nappes has been steadily refined and today the geometry and kinematics of the Helvetic nappe system is generally agreed upon. However, despite the extensive knowledge we have today of the kinematics of fold nappes and thrust sheets, the mechanical process leading to the emplacement of these nappe is still poorly understood. For a long time geologist were facing the so-called 'mechanical paradox' which arises from the fact that a block of rock several kilometers high and tens of kilometers long (i.e. nappe) would break internally rather than start moving on a low angle plane. Several solutions were proposed to solve this apparent paradox. Certainly the most successful is the theory of critical wedges (e.g. Chappie 1978; Dahlen, 1984). In this theory the orogen is considered as a whole and this change of scale allows thrust sheet like structures to form while being consistent with mechanics. However this theoiy is intricately linked to brittle rheology and fold nappes, which are inherently ductile structures, cannot be created in these models. When considering the problem of nappe emplacement from the perspective of ductile rheology the problem of strain localization arises. The aim of this thesis was to develop and apply models based on continuum mechanics and integrating heat transfer to understand the emplacement of nappes. Models were solved either analytically or numerically. In the first two papers of this thesis we derived a simple model which describes channel flow in a homogeneous material with temperature dependent viscosity. We applied this model to the Morcles fold nappe and to several kilometer-scale shear zones worldwide. In the last paper we zoomed out and studied the tectonics of (i) ductile and (ii) visco-elasto-plastic and temperature dependent wedges. In this last paper we focused on the relationship between basement and cover deformation. We demonstrated that during the compression of a ductile passive margin both fold nappes and thrust sheets can develop and that these apparently different structures constitute two end-members of a single structure (i.e. nappe). The transition from fold nappe to thrust sheet is to first order controlled by the deformation of the basement. -- Le système des nappes helvétiques en Suisse occidentale est un empilement de nappes de plis et de nappes de charriage qui se sont mis en place à faible grade métamorphique. Les nappes de plis et les nappes de charriage sont parmi les objets géologiques les plus communs dans les orogènes. Les nappes de plis sont des plis couchés d'échelle kilométrique caractérisés par un flanc normal faiblement défor-mé, au contraire de leur flanc inverse, intensément déformé. Les nappes de charriage, à l'inverse se caractérisent par l'absence d'un flanc inverse bien défini. Elles peuvent être définies comme des blocs de croûte terrestre qui se déplacent de manière presque rigide qui sont déplacés sub-horizontalement jusqu'à plusieurs dizaines de kilomètres. La nappe de Mordes et la nappe du Doldenhorn sont des exemples classiques de nappes de plis et constitue le complexe infra-helvétique en Suisse occidentale et centrale, respectivement. Ce complexe repose sous des nappes de charriages telles les nappes des Diablerets et du Widlhörn en Suisse occidentale. La nappe du Glariis en Suisse centrale se distingue par un déplacement de plus de 35 kilomètres qui s'est effectué à la faveur d'une zone de cisaillement basale épaisse de seulement 1 mètre. Aujourd'hui la géométrie et la cinématique des nappes alpines fait l'objet d'un consensus général. Malgré cela, les processus mécaniques par lesquels ces nappes se sont mises en place restent mal compris. Pendant toute la première moitié du vingtième siècle les géologues les géologues ont été confrontés au «paradoxe mécanique». Celui-ci survient du fait qu'un bloc de roche haut de plusieurs kilomètres et long de plusieurs dizaines de kilomètres (i.e., une nappe) se fracturera de l'intérieur plutôt que de se déplacer sur une surface frictionnelle. Plusieurs solutions ont été proposées pour contourner cet apparent paradoxe. La solution la plus populaire est la théorie des prismes d'accrétion critiques (par exemple Chappie, 1978 ; Dahlen, 1984). Dans le cadre de cette théorie l'orogène est considéré dans son ensemble et ce simple changement d'échelle solutionne le paradoxe mécanique (la fracturation interne de l'orogène correspond aux nappes). Cette théorie est étroitement lié à la rhéologie cassante et par conséquent des nappes de plis ne peuvent pas créer au sein d'un prisme critique. Le but de cette thèse était de développer et d'appliquer des modèles basés sur la théorie de la méca-nique des milieux continus et sur les transferts de chaleur pour comprendre l'emplacement des nappes. Ces modèles ont été solutionnés de manière analytique ou numérique. Dans les deux premiers articles présentés dans ce mémoire nous avons dérivé un modèle d'écoulement dans un chenal d'un matériel homogène dont la viscosité dépend de la température. Nous avons appliqué ce modèle à la nappe de Mordes et à plusieurs zone de cisaillement d'échelle kilométrique provenant de différents orogènes a travers le monde. Dans le dernier article nous avons considéré le problème à l'échelle de l'orogène et avons étudié la tectonique de prismes (i) ductiles, et (ii) visco-élasto-plastiques en considérant les transferts de chaleur. Nous avons démontré que durant la compression d'une marge passive ductile, a la fois des nappes de plis et des nappes de charriages peuvent se développer. Nous avons aussi démontré que nappes de plis et de charriages sont deux cas extrêmes d'une même structure (i.e. nappe) La transition entre le développement d'une nappe de pli ou d'une nappe de charriage est contrôlé au premier ordre par la déformation du socle. -- Le système des nappes helvétiques en Suisse occidentale est un emblement de nappes de plis et de nappes de chaînage qui se sont mis en place à faible grade métamoiphique. Les nappes de plis et les nappes de charriage sont parmi les objets géologiques les plus communs dans les orogènes. Les nappes de plis sont des plis couchés d'échelle kilométrique caractérisés par un flanc normal faiblement déformé, au contraire de leur flanc inverse, intensément déformé. Les nappes de charriage, à l'inverse se caractérisent par l'absence d'un flanc inverse bien défini. Elles peuvent être définies comme des blocs de croûte terrestre qui se déplacent de manière presque rigide qui sont déplacés sub-horizontalement jusqu'à plusieurs dizaines de kilomètres. La nappe de Morcles and la nappe du Doldenhorn sont des exemples classiques de nappes de plis et constitue le complexe infra-helvétique en Suisse occidentale et centrale, respectivement. Ce complexe repose sous des nappes de charriages telles les nappes des Diablerets et du Widlhörn en Suisse occidentale. La nappe du Glarüs en Suisse centrale est certainement l'exemple de nappe de charriage le plus célèbre au monde. Elle se distingue par un déplacement de plus de 35 kilomètres qui s'est effectué à la faveur d'une zone de cisaillement basale épaisse de seulement 1 mètre. La géométrie et la cinématique des nappes alpines fait l'objet d'un consensus général parmi les géologues. Au contraire les processus physiques par lesquels ces nappes sont mises en place reste mal compris. Les sédiments qui forment les nappes alpines se sont déposés à l'ère secondaire et à l'ère tertiaire sur le socle de la marge européenne qui a été étiré durant l'ouverture de l'océan Téthys. Lors de la fermeture de la Téthys, qui donnera naissance aux Alpes, le socle et les sédiments de la marge européenne ont été déformés pour former les nappes alpines. Le but de cette thèse était de développer et d'appliquer des modèles basés sur la théorie de la mécanique des milieux continus et sur les transferts de chaleur pour comprendre l'emplacement des nappes. Ces modèles ont été solutionnés de manière analytique ou numérique. Dans les deux premiers articles présentés dans ce mémoire nous nous sommes intéressés à la localisation de la déformation à l'échelle d'une nappe. Nous avons appliqué le modèle développé à la nappe de Morcles et à plusieurs zones de cisaillement provenant de différents orogènes à travers le monde. Dans le dernier article nous avons étudié la relation entre la déformation du socle et la défonnation des sédiments. Nous avons démontré que nappe de plis et nappes de charriages constituent les cas extrêmes d'un continuum. La transition entre nappe de pli et nappe de charriage est intrinsèquement lié à la déformation du socle sur lequel les sédiments reposent.

An external site controls closing of the epithelial Na+ channel ENaC.

Members of the ENaC/degenerin family of ion channels include the epithelial sodium channel (ENaC), acid-sensing ion channels (ASICs) and the nematode Caenorhabditis elegans degenerins. These channels are activated by a variety of stimuli such as ligands (ASICs) and mechanical forces (degenerins), or otherwise are constitutively active (ENaC). Despite their functional heterogeneity, these channels might share common basic mechanisms for gating. Mutations of a conserved residue in the extracellular loop, namely the 'degenerin site' activate all members of the ENaC/degenerin family. Chemical modification of a cysteine introduced in the degenerin site of rat ENaC (betaS518C) by the sulfhydryl reagents MTSET or MTSEA, results in a approximately 3-fold increase in the open probability. This effect is due to an 8-fold shortening of channel closed times and an increase in the number of long openings. In contrast to the intracellular gating domain in the N-terminus which is critical for channel opening, the intact extracellular degenerin site is necessary for normal channel closing, as illustrated by our observation that modification of betaS518C destabilises the channel closed state. The modification by the sulfhydryl reagents is state- and size-dependent consistent with a conformational change of the degenerin site during channel opening and closing. We propose that the intracellular and extracellular modulatory sites act on a common channel gate and control the activity of ENaC at the cell surface.

Cost of nursing turnover in a Teaching Hospital

Abstract OBJECTIVE To map the sub processes related to turnover of nursing staff and to investigate and measure the nursing turnover cost. METHOD This is a descriptive-exploratory study, classified as case study, conducted in a teaching hospital in the southeastern, Brazil, in the period from May to November 2013. The population was composed by the nursing staff, using Nursing Turnover Cost Calculation Methodology. RESULTS The total cost of turnover was R$314.605,62, and ranged from R$2.221,42 to R$3.073,23 per employee. The costs of pre-hire totaled R$101.004,60 (32,1%), and the hiring process consumed R$92.743,60 (91.8%) The costs of post-hire totaled R$213.601,02 (67,9%), for the sub process decreased productivity, R$199.982,40 (93.6%). CONCLUSION The study identified the importance of managing the cost of staff turnover and the financial impact of the cost of the employee termination, which represented three times the average salary of the nursing staff.

Utilização do target costing na determinação do preço de venda: O caso da Alvo, s.a.

Com a crescente competitividade no mundo empresarial, os preços dos produtos passaram a exercer um papel fundamental na expansão e sobrevivência das empresas. Consequentemente, hoje em dia é o mercado que determina o preço de venda de um produto, devendo a empresa produzir ao menor custo possível para garantir o retorno financeiro desejado. O objectivo do trabalho é verificar se os procedimentos de Target Costing podem ser aplicados nas Pequenas e Médias Empresas industriais, em São Vicente, cuja actividade também se destina à produção de produtos alimentícios. Como produto teste foi selecionado o produto A, confecçionado pela empresa Alvo, SA. Para atingirmos os objectivos foram utilizadas várias técnicas e métodos de pesquisa, tais como: levantamento bibliográfico, entrevista, conversas informais, questionário, levantamento de dados nos documentos financeiros da empresa ALVO, SA. Para entendermos e aplicarmos o processo de Target Costing recorreu-se à literatura do mesmo. Foi aplicado um questionário para ver a percepção dos clientes da empresa objecto de estudo, quanto ao preço que considerariam ideal pagar por cada quilograma do produto A adquirida. A entrevista realizada com o director geral da ALVO, SA acompanhada com os dados obtidos do departamento de contabilidade serviram como um meio de conhecer a empresa e o seu funcionamento, realçando informações sobre a fixação do preço venda dos seus produtos, a gestão de custos, entre outros. Antes de testar, através de um caso prático, a aplicação do Target Costing, verificou-se, primeiramente, sua aplicação em termos teóricos, testando os seus princípios e premissas para o produto A, na Empresa ALVO, SA. Como resultado constactou-se que os procedimentos de Target Costing podem ser aplicados, tanto na teoria como na prática, nas Pequenas e Médias Empresas industriais, em São Vicente, cuja actividade se destina a produção do produto A. With the increasing competition in the business world, the prices of products have come to play a key role in the expansion and survival of businesses. Consequently, today the selling price of a product is determined by the market so companies should produce at the lowest possible cost to ensure the desired financial return. The purpose of this paper work is to verify if the Target Costing’s procedure can be applied in small and medium business enterprises in São Vicente, whose activity is production of food. For that, product A was selected for tests. In order to achieve these objectives, some techniques and research methods like bibliographic analysis, interviews, informal conversations, questionnaires and analysis of the financial documents of ALVO, SA that is the subject of this case study, were utilized. With the intention of understanding and applying the Target Costing process we also resorted to a detailed reading of related bibliography. A questionnaire was applied in order to know the customers’ opinions about the ideal price for each kilogram of product A. The interview with the managing director of ALVO, SA, combined with the data obtained in the accounting department, was also used as a way to know the company, and it ’s functioning, highlight ing items such as: selling price format ion, cost management, among other aspects. Before testing, through a practical case study, the use of the Target Costing, the theoretical application was firstly verified by testing its principles and assumptions. Secondly, the application of the Target Costing’s process was shown step by step concerning product A at ALVO SA company. As a result we came to the conclusion that procedures used with Target Costing can be applied, in theory and in practice, in small or medium-sized industrial enterprises, in São Vicente, where product A is being manufactured.

Public perceptions of animal experimentation across Europe

The goal of this article is to map out public perceptions of animal experimentation in 28 European countries. Postulating cross-cultural differences, this study mixes country-level variables (from the Eurostat database) and individual-level variables (from Eurobarometer Science and Technology 2010). It is shown that experimentation on animals such as mice is generally accepted in European countries, but perceptions are divided on dogs and monkeys. Between 2005 and 2010, we observe globally a change of approval on dogs and monkeys, with a significant decrease in nine countries. Multilevel analysis results show differences at country level (related to a post-industrialism model) and at individual level (related to gender, age, education, proximity and perceptions of science and the environment). These results may have consequences for public perceptions of science and we call for more cross-cultural research on press coverage of animal research and on the level of public engagement of scientists doing animal research

Differentiation of focal liver lesions: usefulness of parametric imaging with contrast-enhanced US.

Purpose: To evaluate whether parametric imaging with contrast material-enhanced ultrasonography (US) is superior to visual assessment for the differential diagnosis of focal liver lesions (FLLs). Materials and Methods: This study had institutional review board approval, and verbal patient informed consent was obtained. Between August 2005 and October 2008, 146 FLLs in 145 patients (63 women, 82 men; mean age, 62.5 years; age range, 22-89 years) were imaged with real-time low-mechanical-index contrast-enhanced US after a bolus injection of 2.4 mL of a second-generation contrast agent. Clips showing contrast agent uptake kinetics (including arterial, portal, and late phases) were recorded and subsequently analyzed off-line with dedicated image processing software. Analysis of the dynamic vascular patterns (DVPs) of lesions with respect to adjacent parenchyma allowed mapping DVP signatures on a single parametric image. Cine loops of contrast-enhanced US and results from parametric imaging of DVP were assessed separately by three independent off-site readers who classified each lesion as benign, malignant, or indeterminate. Sensitivity, specificity, accuracy, and positive and negative predictive values were calculated for both techniques. Interobserver agreement (κ statistics) was determined. Results: Sensitivities for visual interpretation of cine loops for the three readers were 85.0%, 77.9%, and 87.6%, which improved significantly to 96.5%, 97.3%, and 96.5% for parametric imaging, respectively (P < .05, McNemar test), while retaining high specificity (90.9% for all three readers). Accuracy scores of parametric imaging were higher than those of conventional contrast-enhanced US for all three readers (P < .001, McNemar test). Interobserver agreement increased with DVP parametric imaging compared with conventional contrast-enhanced US (change of κ from 0.54 to 0.99). Conclusion: Parametric imaging of DVP improves diagnostic performance of contrast-enhanced US in the differentiation between malignant and benign FLLs; it also provides excellent interobserver agreement.

Work values as predictors of entrepreneurial career intentions: A longitudinal analysis of gender effects

Purpose - Work values are an important characteristic to understand gender differences in career intentions, but how gender affects the relationship between values and career intentions is not well established. The purpose of this paper is to investigate whether gender moderates the effects of work values on level and change of entrepreneurial intentions (EI). Design/methodology/approach - In total, 218 German university students were sampled regarding work values and with EI assessed three times over the course of 12 months. Data were analysed with latent growth modelling. Findings - Self-enhancement and openness to change values predicted higher levels and conservation values lower levels of EI. Gender moderated the effects of enhancement and conservation values on change in EI. Research limitations/implications - The authors relied on self-reported measures and the sample was restricted to university students. Future research needs to verify to what extent these results generalize to other samples and different career fields, such as science or nursing. Practical implications - The results imply that men and women are interested in an entrepreneurial career based on the same work values but that values have different effects for men and women regarding individual changes in EI. The results suggest that the prototypical work values of a career domain seem important regarding increasing the career intent for the gender that is underrepresented in that domain. Originality/value - The results enhance understanding of how gender affects the relation of work values and a specific career intention, such as entrepreneurship.

The Value of Private Information within Evolving Groups

This note offers an analytical framework aimed at explaining how individual agents purposefully act with the goal of managing the value of their information sets. Agents undertake a process of private accumulation of information, which takes into account the non-rival nature of this peculiar entity. Non rivalry introduces an externality that might trigger long-term endogenous fluctuations. The dynamics of interaction, namely the possibility of entering or exiting the group to which the individuals belong, wil l determine time trajectories for the information flows that are unique for the specific conditions of interaction that are being considered at a given momentEste artigo apresenta uma estrutura analítica que tem por objetivo explicar como é que os agentes individuais atuam, de modo intencional, com o propósito de gerir o valor da informação que detêm. Os agentes prosseguem um processo de acumulação privada de informação, o qual toma em consideração a natureza não rival desta entidade que detém características específicas. A não rivalidade introduz uma externalidade que pode despoletar flutuações endógenas de longo prazo. A dinâmica de interação, nomeadamente a possibilidade de entrar ou sair do grupo a que os indivíduos pertencem, vai determinar a formação de trajetórias no tempo para os fluxos de informação, as quais são únicas para as condições particulares de interação que estão a ser consideradas num determinado momento.

Homologous DNA pairing domain peptides of RecA protein: intrinsic propensity to form beta-structures and filaments.

The 20 amino acid residue peptides derived from RecA loop L2 have been shown to be the pairing domain of RecA. The peptides bind to ss- and dsDNA, unstack ssDNA, and pair the ssDNA to its homologous target in a duplex DNA. As shown by circular dichroism, upon binding to DNA the disordered peptides adopt a beta-structure conformation. Here we show that the conformational change of the peptide from random coil to beta-structure is important in binding ss- and dsDNA. The beta-structure in the DNA pairing peptides can be induced by many environmental conditions such as high pH, high concentration, and non-micellar sodium dodecyl sulfate (6 mM). This behavior indicates an intrinsic property of these peptides to form a beta-structure. A beta-structure model for the loop L2 of RecA protein when bound to DNA is thus proposed. The fact that aromatic residues at the central position 203 strongly modulate the peptide binding to DNA and subsequent biochemical activities can be accounted for by the direct effect of the aromatic amino acids on the peptide conformational change. The DNA-pairing domain of RecA visualized by electron microscopy self-assembles into a filamentous structure like RecA. The relevance of such a peptide filamentous structure to the structure of RecA when bound to DNA is discussed.

Scenic Byways of Iowa, June 12, 2007

Bypass traffic and experience a “scenic” change of pace by traveling along Iowa’s scenic byways. Iowa’s eight state-designated and two nationally-designated scenic byways are a great way to experience Iowa’s natural beauty, history and culture. Stop to smell the wildflowers or listen to the songbirds, or follow an impulse to take a side trip to one of the many attractions and countryside hamlets. A camera is a must for these postcard-perfect vistas. You never know when you will encounter a bald eagle along the Mississippi River, rare plants and animals in the Loess Hills, or the exceptional architecture of unique barns, churches and other buildings along the routes. This brochure identifies each scenic byway route and the approximate mileage in terms of hard-surfaced and gravel roadways. Estimated driving time ranges from one and one-half hour to three and one-half hours, depending on your speed and the number of stops. These routes are offered for those of you who want to relax and stop often to enjoy the sights.

Failure of the surgical treatment in 115 infected hip arthroplasties-­analysis of a 12-­year prosthetic joint cohort study (1999-­2010)

Background:¦Infection after total or partial hip arthroplasty (HA) leads to significant long-­term morbidity and high healthcare cost. We evaluated reasons for treatment failure of different surgical modalities in a 12-­year prosthetic hip joint infection cohort study.¦Method:¦All patients hospitalized at our institution with infected HA were included either retrospectively (1999-­‐2007) or prospectively¦(2008-­‐2010). HA infection was defined as growth of the same microorganism in ≥2 tissues or synovialfluid culture, visible purulence, sinus tract or acute inflammation on tissue histopathology. Outcome analysis was performed at outpatient visits, followed by contacting patients, their relatives and/or treating physicians afterwards.¦Results:¦During the study period, 117 patients with infected HA were identified. We excluded 2 patients due to missing data. The average age was 69 years (range, 33-­‐102 years); 42% were female. HA was mainly performed for osteoarthritis (n=84), followed by trauma (n=22), necrosis (n=4), dysplasia(n=2), rheumatoid arthritis (n=1), osteosarcoma (n=1) and tuberculosis (n=1). 28 infections occurred early(≤3 months), 25 delayed (3-­‐24 months) and 63 late (≥24 months after surgery). Infected HA were¦treated with (i) two-­‐stage exchange in 59 patients (51%, cure rate: 93%), (ii) one-­‐stage exchange in 5 (4.3%, cure rate: 100%), (iii) debridement with change of mobile parts in 18 (17%, cure rate: 83%), (iv) debridement without change of mobile¦parts in 17 (14%, cure rate : 53% ), (v) Girdlestone in 13 (11%, cure rate: 100%), and (vi) two-­‐stage exchange followed by¦removal in 3 (2.6%). Patients were followed for an average of 3.9 years (range, 0.1 to 9 years), 7 patients died unrelated to the infected HA. 15 patients (13%) needed additional operations, 1 for mechanical reasons(dislocation of spacer) and 14 for persistent infection: 11 treated with debridement and retention (8 without change; and 3 with change of mobile parts) and 3 with two-­‐stage exchange. The average number of surgery was 2.2 (range, 1 to 5). The infection was finally eradicated in all patients, but the functional outcome remained unsatisfactory in 20% (persistent pain or impaired mobility due to spacer or Girdlestone situation).¦Conclusions:¦Non-­‐respect of current treatment concept leads to treatment failure with subsequent operations. Precise analysis of each treatment failure can be used for improving the treatment algorithm leading to better results.