Carbon sources and polyethylene glycol on soybean somatic embryo conversion

Somatic embryogenesis is an efficient method for the production of target cells for soybean genetic transformation. However, this method still offers low percentages of plant regeneration, and perhaps is related to the maturation process and high morphological abnormalities of the matured embryos. This study aimed to identify a maturation medium that could contribute to the outcome of more efficient plant regeneration results. Embryogenic clusters, derived from cotyledons of immature seeds of the soybean cultivars Bragg and IAS5, were used as starting material for embryos development. Different maturation media were tested by using 6% maltose, 3% sucrose or 6% sucrose, combined with or without 25 g L-1 of the osmotic regulator polyethylene glycol (PEG-8000). The histodifferentiated embryos were quantified and classified in morphological types. Percentages of converted embryos were analyzed. Cultivar Bragg resulted in higher matured embryo quantities, but lower percentages were obtained for the conversion in comparison to cultivar IAS5. While the addition of PEG did not affect the number of embryos converted into plants, 6% sucrose enhanced the conversion percent significantly.

Issue review : school district cash reserve levy.

During the recent economic crisis, school district budgets have been impacted by state school aid funding shortfalls and state aid reductions due to across-the-board general fund reductions in fiscal year 2009 and fiscal year 2010. Additionally, in fiscal year 2011, the state school aid appropriation was capped and was 156.1 million dollars short of fully funding the state portion of the school aid formula. This issue review examines the impact that the reductions in state aid have had on school district cash reserve levies.

Copeptin is not associated with menstrual cycle hormone.

Background: Copeptin (CP), a derivate from the antidiuretic hormone (ADH) precursor pre-pro-vasopressin, stochiometrically mirrors ADH secretion. CP is increasingly evaluated as a diagnostic and prognostic biomarker in different diseases. It is therefore important to recognize possible confounding factors when interpreting CP levels. In healthy regularly menstruating women, there is a small but measurable physiological variability of hormones involved in fluid regulation. ADH plasma levels have been found to be lowest at menstruation, increasing during the follicular phase with a peak at ovulation and a drop in the luteal phase. We investigated the variability of CP during the menstrual cycle (MC) and its correlation to MC hormones. Methods: In total, 15 healthy women with regular MC (from 26 to 33 days) were included in this study. Ovulation was confirmed by progesterone (prog) levels on day 21 of the MC before entering the study and during the study. Blood collection was performed on days 3, 5, 8-16, 18, 21, 24 and 27 of their MC. Serums were assayed for prog, estradiol (E2), LH, and CP. Mixed linear regression analysis for repeated measures was performed to study the changes of CP, prog, E2 and LH during the MC, and to test the correlation of CP with sex hormones during the MC. Results: Mean MC length in all subjects was 28.5±2.2 d. E2, prog, and LH exhibited characteristic changes during the MC (all P< 0.05). All cycles were ovulatory (peak prog 54±15 nmol/l). CP levels did not change significantly throughout the MC, and were not associated with changes in prog, E2 or LH-levels (all P=ns). Conclusion: CP levels remain stable during the MC and are not influenced by changes in sex hormones. This implicates that it is not necessary to consider MC phases when using CP as a biomarker in premenopausal women.

Statistically significant changes of antimüllerian hormone and inhibin levels during the physiologic menstrual cycle in reproductive age women.

OBJECTIVE: To define the dynamics of antimüllerian hormone (AMH) and inhibins during the physiologic menstrual cycle. DESIGN: Longitudinal study. SETTING: University hospital. PATIENT(S): 36 young, healthy, normal weight Caucasian women without medication. INTERVENTION(S): Normal ovulatory menstrual cycles were evaluated by regular blood sampling taken every other day and periovulatory every day. MAIN OUTCOME MEASURE(S): Serum concentrations of AMH, inhibin A and B, follicle-stimulating hormone (FSH), luteinizing hormone (LH), prolactin, estradiol, progesterone, and free testosterone were measured in all blood samples. RESULT(S): Median AMH levels are statistically significantly higher in the late follicular compared with ovulation or the early luteal phase. There are statistically significant correlations between both AMH and FSH, and AMH and free testosterone in all cycle phases. Inhibin A increases strongly in the late follicular phase and peaks at day LH + 4. Inhibin B shows a broad midfollicular and a sharp early luteal peak, the difference being statistically significant between day LH + 4 and the earlier time points and between day LH + 2 and day LH. Although there is a negative association between inhibin A or B and the body mass index (BMI), there is no correlation between AMH and the BMI. CONCLUSION(S): Levels of AMH show a statistically significant change during the menstrual cycle and may influence the circulating gonadotropin and steroid hormone levels.

Global methylation state at base-pair resolution of the Caulobacter genome throughout the cell cycle.

The Caulobacter DNA methyltransferase CcrM is one of five master cell-cycle regulators. CcrM is transiently present near the end of DNA replication when it rapidly methylates the adenine in hemimethylated GANTC sequences. The timing of transcription of two master regulator genes and two cell division genes is controlled by the methylation state of GANTC sites in their promoters. To explore the global extent of this regulatory mechanism, we determined the methylation state of the entire chromosome at every base pair at five time points in the cell cycle using single-molecule, real-time sequencing. The methylation state of 4,515 GANTC sites, preferentially positioned in intergenic regions, changed progressively from full to hemimethylation as the replication forks advanced. However, 27 GANTC sites remained unmethylated throughout the cell cycle, suggesting that these protected sites could participate in epigenetic regulatory functions. An analysis of the time of activation of every cell-cycle regulatory transcription start site, coupled to both the position of a GANTC site in their promoter regions and the time in the cell cycle when the GANTC site transitions from full to hemimethylation, allowed the identification of 59 genes as candidates for epigenetic regulation. In addition, we identified two previously unidentified N(6)-methyladenine motifs and showed that they maintained a constant methylation state throughout the cell cycle. The cognate methyltransferase was identified for one of these motifs as well as for one of two 5-methylcytosine motifs.

A structural MRI study of motor conversion disorder: evidence of reduction in thalamic volume.

OBJECTIVE: To investigate potential abnormalities in subcortical brain structures in conversion disorder (CD) compared with controls using a region of interest (ROI) approach. METHODS: Fourteen patients with motor CD were compared with 31 healthy controls using high-resolution MRI scans with an ROI approach focusing on the basal ganglia, thalamus and amygdala. Brain volumes were measured using Freesurfer, a validated segmentation algorithm. RESULTS: Significantly smaller left thalamic volumes were found in patients compared with controls when corrected for intracranial volume. These reductions did not vary with handedness, laterality, duration or severity of symptoms. CONCLUSIONS: These differences may reflect a primary disease process in this area or be secondary effects of the disorder, for example, resulting from limb disuse. Larger, longitudinal structural imaging studies will be required to confirm the findings and explore whether they are primary or secondary to CD.

Hypertension. Angio-oedème sous inhibition de l'enzyme de conversion de l'angiotensine et de la dipeptidyl-peptidase-4 [Angioedema during ACE and DPP-4 inhibition]

Angioedema is a rare side effect of angiotensin converting enzyme (ACE) inhibitors. Its cause is probably related to the accumulation of bradykinin and substance P, i.e. two proinflammatory peptides normally inactivated by ACE. Angioedema occurs most of the time at the early phase of treatment, but may also develop during long-term treatment. It might involve the gastro-intestinal tract, leading to abdominal pain, vomiting and/or diarrhea, as well as pancreatitis. Dipeptidyl-ptidase-4 (DPP-4) is another enzyme allowing the degradation of bradykinin and substance P. Co-administering an ACE inhibitor and a DPP-4 inhibitor (as an antidiabetic agent) increases significantly the risk of angioedema.

Activation of human meiosis-specific recombinase Dmc1 by Ca2+.

Rad51 and its meiotic homolog Dmc1 are key proteins of homologous recombination in eukaryotes. These proteins form nucleoprotein complexes on single-stranded DNA that promote a search for homology and that perform DNA strand exchange, the two essential steps of genetic recombination. Previously, we demonstrated that Ca2+ greatly stimulates the DNA strand exchange activity of human (h) Rad51 protein (Bugreev, D. V., and Mazin, A. V. (2004) Proc. Natl. Acad. Sci. U. S. A. 101, 9988-9993). Here, we show that the DNA strand exchange activity of hDmc1 protein is also stimulated by Ca2+. However, the mechanism of stimulation of hDmc1 protein appears to be different from that of hRad51 protein. In the case of hRad51 protein, Ca2+ acts primarily by inhibiting its ATPase activity, thereby preventing self-conversion into an inactive ADP-bound complex. In contrast, we demonstrate that hDmc1 protein does not self-convert into a stable ADP-bound complex. The results indicate that activation of hDmc1 is mediated through conformational changes induced by free Ca2+ ion binding to a protein site that is distinct from the Mg2+.ATP-binding center. These conformational changes are manifested by formation of more stable filamentous hDmc1.single-stranded DNA complexes. Our results demonstrate a universal role of Ca2+ in stimulation of mammalian DNA strand exchange proteins and reveal diversity in the mechanisms of this stimulation.

Life events in conversion disorder: Role of timing and nature of events

Aims: To compare the frequency of life events in the year preceding illness onset in a series of Conversion Disorder (CD) patients, with those of a matched control group and to characterize the nature of those events in terms of "escape" potential. Traditional models of CD hypothesise that relevant stressful experiences are "converted" into physical symptoms to relieve psychological pressure, and that the resultant disability allows "escape" from the stressor, providing some advantage to the individual. Methods: The Life Events and Difficulties Schedule (LEDS) is a validated semi-structured interview designed to minimise recall and interviewer bias through rigorous assessment and independent rating of events. An additional "escape" rating was developed. Results: In the year preceding onset in 25 CD patients (mean age 38.9 years ± 8) and a similar matched period in 13 controls (mean age 36.2 years ± 10), no significant difference was found in the proportion of subjects having ≥ 1 severe event (CD 64%, controls 38%; p=0.2). In the last month preceding onset, a higher number of patients experienced ≥1 severe events than controls (52% vs 15%, odds ratio 5.95 (CI: 1.09-32.57)). Patients were twice as much more likely to have a severe escape events than controls, in the month preceding onset (44% vs 7%, odds ratio 9.43 (CI: 1.06-84.04). Conclusion: Preliminary data from this ongoing study suggest that the time frame (preceding month) and the nature ("escape") of the events may play an important role in identifying key events related to CD onset.

A spatially explicit life cycle inventory of the global textile chain

Life cycle analyses (LCA) approaches require adaptation to reflect the increasing delocalization of production to emerging countries. This work addresses this challenge by establishing a country-level, spatially explicit life cycle inventory (LCI). This study comprises three separate dimensions. The first dimension is spatial: processes and emissions are allocated to the country in which they take place and modeled to take into account local factors. Emerging economies China and India are the location of production, the consumption occurs in Germany, an Organisation for Economic Cooperation and Development country. The second dimension is the product level: we consider two distinct textile garments, a cotton T-shirt and a polyester jacket, in order to highlight potential differences in the production and use phases. The third dimension is the inventory composition: we track CO2, SO2, NO (x), and particulates, four major atmospheric pollutants, as well as energy use. This third dimension enriches the analysis of the spatial differentiation (first dimension) and distinct products (second dimension). We describe the textile production and use processes and define a functional unit for a garment. We then model important processes using a hierarchy of preferential data sources. We place special emphasis on the modeling of the principal local energy processes: electricity and transport in emerging countries. The spatially explicit inventory is disaggregated by country of location of the emissions and analyzed according to the dimensions of the study: location, product, and pollutant. The inventory shows striking differences between the two products considered as well as between the different pollutants considered. For the T-shirt, over 70% of the energy use and CO2 emissions occur in the consuming country, whereas for the jacket, more than 70% occur in the producing country. This reversal of proportions is due to differences in the use phase of the garments. For SO2, in contrast, over two thirds of the emissions occur in the country of production for both T-shirt and jacket. The difference in emission patterns between CO2 and SO2 is due to local electricity processes, justifying our emphasis on local energy infrastructure. The complexity of considering differences in location, product, and pollutant is rewarded by a much richer understanding of a global production-consumption chain. The inclusion of two different products in the LCI highlights the importance of the definition of a product's functional unit in the analysis and implications of results. Several use-phase scenarios demonstrate the importance of consumer behavior over equipment efficiency. The spatial emission patterns of the different pollutants allow us to understand the role of various energy infrastructure elements. The emission patterns furthermore inform the debate on the Environmental Kuznets Curve, which applies only to pollutants which can be easily filtered and does not take into account the effects of production displacement. We also discuss the appropriateness and limitations of applying the LCA methodology in a global context, especially in developing countries. Our spatial LCI method yields important insights in the quantity and pattern of emissions due to different product life cycle stages, dependent on the local technology, emphasizing the importance of consumer behavior. From a life cycle perspective, consumer education promoting air-drying and cool washing is more important than efficient appliances. Spatial LCI with country-specific data is a promising method, necessary for the challenges of globalized production-consumption chains. We recommend inventory reporting of final energy forms, such as electricity, and modular LCA databases, which would allow the easy modification of underlying energy infrastructure.

Integrating life cycle costs and environmental impacts of composite rail car-bodies for a Korean train

Background, aim, and scope A coupled Life Cycle Costing and life cycle assessment has been performed for car-bodies of the Korean Tilting Train eXpress (TTX) project using European and Korean databases, with the objective of assessing environmental and cost performance to aid materials and process selection. More specifically, the potential of polymer composite car-body structures for the Korean Tilting Train eXpress (TTX) has been investigated. Materials and methods This assessment includes the cost of both carriage manufacturing and use phases, coupled with the life cycle environmental impacts of all stages from raw material production, through carriage manufacture and use, to end-of-life scenarios. Metallic carriages were compared with two composite options: hybrid steel-composite and full-composite carriages. The total planned production for this regional Korean train was 440 cars, with an annual production volume of 80 cars. Results and discussion The coupled analyses were used to generate plots of cost versus energy consumption and environmental impacts. The results show that the raw material and manufacturing phase costs are approximately half of the total life cycle costs, whilst their environmental impact is relatively insignificant (3-8%). The use phase of the car-body has the largest environmental impact for all scenarios, with near negligible contributions from the other phases. Since steel rail carriages weigh more (27-51%), the use phase cost is correspondingly higher, resulting in both the greatest environmental impact and the highest life cycle cost. Compared to the steel scenario, the hybrid composite variant has a lower life cycle cost (16%) and a lower environmental impact (26%). Though the full composite rail carriage may have the highest manufacturing cost, it results in the lowest total life cycle costs and lowest environmental impacts. Conclusions and recommendations This coupled cost and life cycle assessment showed that the full composite variant was the optimum solution. This case study showed that coupling of technical cost models with life cycle assessment offers an efficient route to accurately evaluate economic and environmental performance in a consistent way.