A lung-on-chip array with an integrated bio-inspired respiration mechanism

We report about a lung-on-chip array that mimics the pulmonary parenchymal environment, including the thin, alveolar barrier and the three-dimensional cyclic strain induced by the breathing movements. A micro-diaphragm used to stretch the alveolar barrier is inspired by the in-vivo diaphragm, the main muscle responsible for inspiration. The design of this device aims not only at best reproducing the in-vivo conditions found in the lung parenchyma, but also at making its handling easy and robust. An innovative concept, based on the reversible bonding of the device, is presented that enables to accurately control the concentration of cells cultured on the membrane by easily accessing both sides of the membranes. The functionality of the alveolar barrier could be restored by co-culturing epithelial and endothelial cells that formed tight monolayers on each side of a thin, porous and stretchable membrane. We showed that cyclic stretch significantly affects the permeability properties of epithelial cell layers. Furthermore, we could also demonstrate that the strain influences the metabolic activity and the cytokine secretion of primary human pulmonary alveolar epithelial cells obtained from patients. These results demonstrate the potential of this device and confirm the importance of the mechanical strain induced by the breathing in pulmonary research.

Evolving biomarkers improve prediction of long-term mortality in patients with stable coronary artery disease: the BIO-VILCAD score.

OBJECTIVE Algorithms to predict the future long-term risk of patients with stable coronary artery disease (CAD) are rare. The VIenna and Ludwigshafen CAD (VILCAD) risk score was one of the first scores specifically tailored for this clinically important patient population. The aim of this study was to refine risk prediction in stable CAD creating a new prediction model encompassing various pathophysiological pathways. Therefore, we assessed the predictive power of 135 novel biomarkers for long-term mortality in patients with stable CAD. DESIGN, SETTING AND SUBJECTS We included 1275 patients with stable CAD from the LUdwigshafen RIsk and Cardiovascular health study with a median follow-up of 9.8 years to investigate whether the predictive power of the VILCAD score could be improved by the addition of novel biomarkers. Additional biomarkers were selected in a bootstrapping procedure based on Cox regression to determine the most informative predictors of mortality. RESULTS The final multivariable model encompassed nine clinical and biochemical markers: age, sex, left ventricular ejection fraction (LVEF), heart rate, N-terminal pro-brain natriuretic peptide, cystatin C, renin, 25OH-vitamin D3 and haemoglobin A1c. The extended VILCAD biomarker score achieved a significantly improved C-statistic (0.78 vs. 0.73; P = 0.035) and net reclassification index (14.9%; P < 0.001) compared to the original VILCAD score. Omitting LVEF, which might not be readily measureable in clinical practice, slightly reduced the accuracy of the new BIO-VILCAD score but still significantly improved risk classification (net reclassification improvement 12.5%; P < 0.001). CONCLUSION The VILCAD biomarker score based on routine parameters complemented by novel biomarkers outperforms previous risk algorithms and allows more accurate classification of patients with stable CAD, enabling physicians to choose more personalized treatment regimens for their patients.

The struggle to diversify rural livelihoods: Bio-enterprise development initiatives and their impacts on agro-/pastoral communities in the drylands of Kenya

This article analyses the impacts of four different bio-enterprise initiatives on agro-pastoral livelihoods and on improved natural resources management (NRM) in the drylands of Kenya. In this way it contributes to an area of rural development that is gaining increasing interest, but still has little empirical evidence. Data were collected through interviews, focus group discussions, informal discussions and the study of reports. One of the key findings of this article is that diversification into enterprises requires cooperation among the stakeholders with their varying experiences in development, NRM and business development. In addition to initial investments, such enterprises need sustained financial, as well as other support like capacity development to survive the market introduction phase. For such enterprises to defend their market niches, the quantity and quality of the product are critical. In addition to support in human, financial, social, physical and natural capital, mentoring is another crucial factor for success.

A potential application of sludge-based catalysts for the anaerobic bio-decolorization of tartrazine dye.

Two highly efficient (K2CO3/sludge carbon and ZnCl2/sludge carbon) solids were prepared by chemical addition following carbonization at 800 °C and were tested for anaerobic reduction of tartrazine dye in a continuous upflow packed-bed biological reactor, and their performance was compared to that of commercial activated carbon (CAC). The chemical and structural information of the solids was subjected to various characterizations in order to understand the mechanism for anaerobic decolorization, and efficiency for SBCZN800 and SBCPC800 materials was 87% and 74%, respectively, at a short space time (τ) of 2.0 min. A first-order kinetic model fitted the experimental points and kinetic constants of 0.40, 0.92 and 1.46 min(-1) were obtained for SBCZN800, SBCPC800 and CAC, respectively. The experimental results revealed that performance of solids in the anaerobic reduction of tartrazine dye can depend on several factors including chemical agents, carbonization, microbial population, chemical groups and surface chemistry. The Langmuir and Freundlich models are successfully described in the batch adsorption data. Based on these observations, a cost-effective sludge-based catalyst can be produced from harmful sewage sludge for the treatment of industrial effluents.

Dos Šolem Aleichem buch : tzum tzenṭn jortzaiṭ noch Šolem-Aleichem ; oiṭobiografiše fartzaichenungen fun Šolem Aleichem, bio- un bibliografiše dokumenṭn un maṭerialn

redakṭirt un baloichṭn ... fun D. Berkowiṭš

Pottery as an indication of mobilities?

Pottery is one of the most common and stylistically differentiated sources in prehistoric archaeology. This might be the reason why it served as a waste projection surface for archaeological notions about culture, identity, and mobility in the past. As we do not have access to emic categorisations of Neolithic societies we focus on contexts of practice in which pottery was incorporated. It is the moment of production, which left some of the clearest traces on the vessels. Different ways of using raw materials, specific techniques, and characteristic pottery styles can be observed. We understand them as a result of habitus, as socially shared internalized schemes, patterns and habits in pottery production. Taking this as a staring point, two main pottery groups can be differed on the Swiss Plateau between 3900 and 3500 BC: the Mediterranean influenced Cortaillod pottery in Western Switzerland and the Danubian influenced Pfyn pottery in North-Eastern Switzerland. These pottery styles were not only entangled to some degree. Furthermore, in some settlements vessels made in “foreign” styles - Michelsberg, Munzingen, Néolithique Moyen Bourguignon - are present too. Some of them were travelling objects, as their nonlocal raw materials show. Others were locally made, indicating long-term mobility of their producers. To analyse these phenomena of mobilites and entanglements in our PhDs we plan to apply different archaeological and archaeometrical methods, thus striving for a deeper understanding of the transformative potential of moving people, objects and ideas in Neolithic societies on the Swiss Plateau.

A study of oxygen isotopic fractionation during bio-induced calcite precipitation in eutrophic Baldeggersee, Switzerland

In order to better understand environmental factors controlling oxygen isotope shifts in autochthonous lacustrine carbonate sequences, we undertook an extensive one-year study (March, 1995 to February, 1996) of water-column chemistry and daily sediment trap material from a small lake in Central Switzerland. Comparisons between calculated equilibrium isotope values, using the fractionation equation of Friedman and O’Neil, (1977) and measured oxygen isotope ratios of calcite in the sediment-traps reveal that oxygen isotopic values of autochthonous calcite (δ18O) are in isotopic equilibrium with ambient water during most of the spring and summer, when the majority of the calcite precipitates. In contrast, small amounts of calcite precipitated in early-spring and again in late-autumn are isotopically depleted in 18O relative to the calculated equilibrium values, by as much as 0.8‰. This seasonally occurring apparent isotopic nonequilibrium is associated with times of high phosphorous concentrations, elevated pH (∼8.6) and increased [CO32−] (∼50 μmol/l) in the surface waters. The resulting weighted average δ18O value for the studied period is −9.6‰, compared with a calculated equilibrium δ18O value of −9.4‰. These data convincingly demonstrate that δ18O of calcite are, for the most part, a very reliable proxy for temperature and δ18O of the water.