Development of a Glycocluster Adjuvant Mimicking Natural Yeast beta-(1,2)-Structures

Allergy is characterized by T helper (Th) 2-type immune response after encounter with an allergen leading to subsequent immunoglobulin (Ig) E-mediated hypersensitivity reaction and further allergic inflammation. Allergen-specific immunotherapy (SIT) balances the Th2-biased immunity towards Th1 and T regulatory responses. Adjuvants are used in allergen preparations to intensify and modify SIT. β-(1,2)-oligomannoside constituents present in Candida albicans (C. albicans) cell wall possess Th1-type immunostimulatory properties. The aim of this thesis was to develop a β-(1,2)-linked carbohydrate compound with known structure and anti-allergic properties to be applied as an adjuvant in SIT. First the immunostimulatory properties of various fungal extracts were studied. C. albicans appeared to be the most promising Th1-inducing extract, which led to the synthesis of various mono- or divalent oligomannosides designed on the basis of C. albicans. These carbohydrates did not induce strong cytokine production in human peripheral blood mononuclear cell (PBMC) cultures. In contrast to earlier reports using native oligosaccharides from C. albicans, synthetic -(1,2)-linked mannotetraose did not induce any tumor necrosis factor production in murine macrophages. Next, similarities with synthesized divalent mannosides and the antigenic epitopes of β-(1,2)-linked C. albicans mannan were investigated. Two divalent compounds inhibited specific IgG antibodies binding to below 3 kDa hydrolyzed mannan down to the level of 30–50% showing similar antigenicity to C. albicans. Immunomodulatory properties of synthesized carbohydrate assemblies ranging from mono- to pentavalent were evaluated. A trivalent acetylated dimannose (TADM) induced interleukin-10 (IL-10) and interferon-γ responses. TADM also suppressed birch pollen induced IL-4 and IL-5 responses in allergen (Bet v) stimulated PBMCs of birch pollen allergic subjects. This suppression was stronger with TADM than with other used adjuvants, immunostimulatory oligonucleotides and monophosphoryl lipid A. In a murine model of asthma, the allergen induced inflammatory responses could also be suppressed by TADM on cytokine and antibody levels.

Hyperfine interactions in the new Fe-based superconducting structures and related magnetic phases

This thesis is devoted to the study of the hyperfine properties in iron-based superconductors and the synthesis of these compounds and related phases. During this work polycrystalline chalcogenide samples with stoichiometry 1:1 (FeTe1-χSχ, FeSe1-x) and pnictide samples with stoichiometry 1:2:2 (BaFe2(As1-χPχ)2, EuFe2(As1-x Px)2) were synthesized by solid-state reaction methods in vacuum and in a protecting Ar atmosphere. In several cases post-annealing in oxygen atmosphere was employed. The purity and superconducting properties of the obtained samples were checked with X-ray diffraction, SQUID and resistivity measurements. For studies of the magnetic properties of the investigated samples Mössbauer spectroscopy was used. Using low-temperature measurements around Tc and various values of the source velocity the hyperfine interactions were obtained and the magnetic and structural properties in the normal and superconducting states could be studied. Mössbauer measurements together with XRD characterization were also used for the detection of impurity phases. DFT calculations were used for the theoretical study of Mössbauer parameters for pnictide-based ᴻsamples BaFe2(As1-xPx)2 and EuFe2(As1-xPx)2.

Genesis and Evolution of Brittle Structures In Southwestern Finland and Western South Africa. Insights into Fault Reactivation, Fluid Flow and Structural Maturity in Precambrian Cratons

The bedrock of old crystalline cratons is characteristically saturated with brittle structures formed during successive superimposed episodes of deformation and under varying stress regimes. As a result, the crust effectively deforms through the reactivation of pre-existing structures rather than by through the activation, or generation, of new ones, and is said to be in a state of 'structural maturity'. By combining data from Olkiluoto Island, southwestern Finland, which has been investigated as the potential site of a deep geological repository for high-level nuclear waste, with observations from southern Sweden, it can be concluded that the southern part of the Svecofennian shield had already attained structural maturity during the Mesoproterozoic era. This indicates that the phase of activation of the crust, i.e. the time interval during which new fractures were generated, was brief in comparison to the subsequent reactivation phase. Structural maturity of the bedrock was also attained relatively rapidly in Namaqualand, western South Africa, after the formation of first brittle structures during Neoproterozoic time. Subsequent brittle deformation in Namaqualand was controlled by the reactivation of pre-existing strike-slip faults.In such settings, seismic events are likely to occur through reactivation of pre-existing zones that are favourably oriented with respect to prevailing stresses. In Namaqualand, this is shown for present day seismicity by slip tendency analysis, and at Olkiluoto, for a Neoproterozoic earthquake reactivating a Mesoproterozoic fault. By combining detailed field observations with the results of paleostress inversions and relative and absolute time constraints, seven distinctm superimposed paleostress regimes have been recognized in the Olkiluoto region. From oldest to youngest these are: (1) NW-SE to NNW-SSE transpression, which prevailed soon after 1.75 Ga, when the crust had sufficiently cooled down to allow brittle deformation to occur. During this phase conjugate NNW-SSE and NE-SW striking strike-slip faults were active simultaneous with reactivation of SE-dipping low-angle shear zones and foliation planes. This was followed by (2) N-S to NE-SW transpression, which caused partial reactivation of structures formed in the first event; (3) NW-SE extension during the Gothian orogeny and at the time of rapakivi magmatism and intrusion of diabase dikes; (4) NE-SW transtension that occurred between 1.60 and 1.30 Ga and which also formed the NW-SE-trending Satakunta graben located some 20 km north of Olkiluoto. Greisen-type veins also formed during this phase. (5) NE-SW compression that postdates both the formation of the 1.56 Ga rapakivi granites and 1.27 Ga olivine diabases of the region; (6) E-W transpression during the early stages of the Mesoproterozoic Sveconorwegian orogeny and which also predated (7) almost coaxial E-W extension attributed to the collapse of the Sveconorwegian orogeny. The kinematic analysis of fracture systems in crystalline bedrock also provides a robust framework for evaluating fluid-rock interaction in the brittle regime; this is essential in assessment of bedrock integrity for numerous geo-engineering applications, including groundwater management, transient or permanent CO2 storage and site investigations for permanent waste disposal. Investigations at Olkiluoto revealed that fluid flow along fractures is coupled with low normal tractions due to in-situ stresses and thus deviates from the generally accepted critically stressed fracture concept, where fluid flow is concentrated on fractures on the verge of failure. The difference is linked to the shallow conditions of Olkiluoto - due to the low differential stresses inherent at shallow depths, fracture activation and fluid flow is controlled by dilation due to low normal tractions. At deeper settings, however, fluid flow is controlled by fracture criticality caused by large differential stress, which drives shear deformation instead of dilation.

Colocalization of coilin and nucleolar proteins in Cajal body-like structures of micronucleated PtK2 cells

Cajal bodies (CB) are ubiquitous nuclear structures involved in the biogenesis of small nuclear ribonucleoproteins and show narrow association with the nucleolus. To identify possible relationships between CB and the nucleolus, the localization of coilin, a marker of CB, and of a set of nucleolar proteins was investigated in cultured PtK2 cells undergoing micronucleation. Nocodazol-induced micronucleated cells were examined by double indirect immunofluorescence with antibodies against coilin, fibrillarin, NOR-90/hUBF, RNA polymerase I, PM/Scl, and To/Th. Cells were imaged on a BioRad 1024-UV confocal system attached to a Zeiss Axiovert 100 microscope. Since PtK2 cells possess only one nucleolus organizer region, micronucleated cells presented only one or two micronuclei containing nucleolus. By confocal microscopy we showed that in most micronuclei lacking a typical nucleolus a variable number of round structures were stained by antibodies against fibrillarin, NOR-90/hUBF protein, and coilin. These bodies were regarded as CB-like structures and were not stained by anti-PM/Scl and anti-To/Th antibodies. Anti-RNA polymerase I antibodies also reacted with CB-like structures in some micronuclei lacking nucleolus. The demonstration that a set of proteins involved in RNA/RNP biogenesis, namely coilin, fibrillarin, NOR-90/hUBF, and RNA polymerase I gather in CB-like structures present in nucleoli-devoid micronuclei may contribute to shed some light into the understanding of CB function.

Artificial reflecting structures based on metamaterials

This thesis studies metamaterial-inspired mirrors which provide the most general control over the amplitude and phase of the reflected wavefront. The goal is to explore practical possibilities in designing fully reflective electromagnetic structures with full control over reflection phase. The first part of the thesis describes a planar focusing metamirror with the focal distance less than the operating wavelength. Its practical applicability from the viewpoint of aberrations when the incident angle deviates from the normal one is verified numerically and experimentally. The results indicate that the proposed focusing metamirror can be efficiently employed in many different applications due to its advantages over other conventional mirrors. In the second part of the thesis a new theoretical concept of reflecting metasurface operation is introduced based on Huygens’ principle. This concept in contrast to known approaches takes into account all the requirements of perfect metamirror operation. The theory shows a route to improve the previously proposed metamirrors through tilting the individual inclusions of the structure at a chosen angle from normal. It is numerically tested and the results demonstrate improvements over the previous design.

Risk Assessment of Modern Landfill Structures in Finland

The purpose of this thesis was to investigate environmental permits of landfills with respect to the appropriateness of risk assessments focusing on contaminant migration, structures capable to protect the environment, waste and leachate management and existing environmental impacts of landfills. According to the requirements, a risk assessment is always required to demonstrate compliance with environmental protection requirements if the environmental permit decision deviates from the set requirements. However, there is a reason to doubt that all relevant risk factors are identified in current risk assessment practices in order to protect people end environment. In this dissertation, risk factors were recognized in 12 randomly selected landfills. Based on this analysis, a structural risk assessment method was created. The method was verified with two case examples. Several development needs were found in the risk assessments of the environmental permit decisions. The risk analysis equations used in the decisions did not adequately take into account all the determining factors like waste prospects, total risk quantification or human delineated factors. Instead of focusing on crucial factors, the landfill environmental protection capability is simply expressed via technical factors like hydraulic conductivity. In this thesis, it could be shown, that using adequate risk assessment approaches the most essential environmental impacts can be taken into account by consideration of contaminant transport mechanisms, leachate effects, and artificial landfill structures. The developed structural risk analysing (SRA) method shows, that landfills structures could be designed in a more cost-efficient way taking advantage of recycled or by-products. Additionally, the research results demonstrate that the environmental protection requirements of landfills should be updated to correspond to the capability to protect the environment instead of the current simplified requirements related to advective transport only.

Underwater Remote Welding Technology for Offshore Structures

The construction of offshore structures, equipment and devices requires a high level of mechanical reliability in terms of strength, toughness and ductility. One major site for mechanical failure, the weld joint region, needs particularly careful examination, and weld joint quality has become a major focus of research in recent times. Underwater welding carried out offshore faces specific challenges affecting the mechanical reliability of constructions completed underwater. The focus of this thesis is on improvement of weld quality of underwater welding using control theory. This research work identifies ways of optimizing the welding process parameters of flux cored arc welding (FCAW) during underwater welding so as to achieve desired weld bead geometry when welding in a water environment. The weld bead geometry has no known linear relationship with the welding process parameters, which makes it difficult to determine a satisfactory weld quality. However, good weld bead geometry is achievable by controlling the welding process parameters. The doctoral dissertation comprises two sections. The first part introduces the topic of the research, discusses the mechanisms of underwater welding and examines the effect of the water environment on the weld quality of wet welding. The second part comprises four research papers examining different aspects of underwater wet welding and its control and optimization. Issues considered include the effects of welding process parameters on weld bead geometry, optimization of FCAW process parameters, and design of a control system for the purpose of achieving a desired bead geometry that can ensure a high level of mechanical reliability in welded joints of offshore structures. Artificial neural network systems and a fuzzy logic controller, which are incorporated in the control system design, and a hybrid of fuzzy and PID controllers are the major control dynamics used. This study contributes to knowledge of possible solutions for achieving similar high weld quality in underwater wet welding as found with welding in air. The study shows that carefully selected steels with very low carbon equivalent and proper control of the welding process parameters are essential in achieving good weld quality. The study provides a platform for further research in underwater welding. It promotes increased awareness of the need to improve the quality of underwater welding for offshore industries and thus minimize the risk of structural defects resulting from poor weld quality.

Analysis and guidelines for implementation of EN 1090-2 Standard to assist execution class assignment of steel structures

Finnish design and consulting companies are delivering robust and cost-efficient steel structures solutions to a large number of manufacturing companies worldwide. Recently introduced EN 1090-2 standard obliges these companies to specify the execution class of steel structures for their customers. This however, requires clarifying, understanding and interpreting the sophisticated procedure of execution class assignment. The objective of this research is to provide a clear explanation and guidance through the process of execution class assignment for a given steel structure and to support the implementation of EN 1090-2 standard in Rejlers Oy, one of Finnish design and consulting companies. This objective is accomplished by creating a guideline for designers that elaborates on the four-step process of the execution class assignment for a steel structure or its part. Steps one to three define the consequence class (projected consequences of structure failure), the service category (hazards associated with the service use exploitation of steel structure) and the production category (manufacturing process peculiarities), based on the ductility class (capacity of structure to withstand deformations) and the behaviour factor (corresponds to structure seismic behaviour). The final step is the execution class assignment taking into account results of previous steps. Main research method is indepth literature review of European standards family for steel structures. Other research approach is a series of interviews of Rejlers Oy representatives and its clients, results of which have been used to evaluate the level of EN 1090-2 awareness. Rejlers Oy will use the developed novel coherent standard implementation guideline to improve its services and to obtain greater customer satisfaction.

Convenience of scallops in plate structures

In this thesis was performed comprehensive study about the convenience of scallops in plate structures. A literature review was performed and lack of knowledge was fulfilled with fatigue tests performed in the laboratory of Steel Structures at the Lappeenranta University of Technology and with finite element method. The aim of this thesis was to produce design guidance for the use of scallops for different structural details and different loading conditions. An additional aim was to include more precise instructions for scallop design to produce good fatigue resistance and appropriate manufacturing quality. The literature review was performed searching bridge engineering and maritime standards and design guides and studies from scientific databases and reference lists from the literature of this field. Fatigue tests were used to research the effect of using scallops or not using scallops to fatigue strength of bracket specimen. Tests were performed on three specimens with different scallop radii and to five specimens without scallops with different weld penetration depths. Finite element method using solid elements, symmetry and submodels was used to determine stress concentration factors for I-beams with scallops. Stresses were defined with hot spot stress method. Choosing to use a scallop or not in the structure is affected by many factors, such as structural and loading conditions and manufacturability. As a rule of thumb, scallops should be avoided because those cause stress concentration points to the structure and take a lot of time to manufacture. When scallops are not used, good quality welding should be provided and full weld penetration is recommended to be used in load carrying corner weld areas. In some cases, it is advisable to use scallops. In that case, circular scallops are recommended to be used and radius should be chosen from fatigue strength or manufacturing point of view.

The micromorphology of Paleoseismic soft sediment deformation structures in glacial deposits from three sample sites in Scotland /

The nature of this research is to investigate paleoseismic deformation of glacial soft sediments from three sampling sites throughout the Scottish Highlands; Arrat's Mills, Meikleour and Glen Roy. The paleoseismic evidence investigated in this research will provide a basis for applying criteria to soft sediment deformation structures, and the trigger mechanisms that create these structures. Micromorphology is the tool used in this to investigate paleoseismic deformation structures in thin section. Thin section analysis, (micromorphology) of glacial sediments from the three sampling sites is used to determine microscale evidence of past earthquakes that can be correlated to modem-day events and possibly lead to a better understanding of the impact of earthquakes throughout a range of sediment types. The significance of the three sampling locations is their proximity to two major active fault zones that cross Scotland. The fault zones are the Highland Boundary Fault and the Great Glen Fault, these two major faults that parallel each other and divide the country in half Sims (1975) used a set of seven criteria that identified soft sediment deformation structures created by a magnitude six earthquake in Cahfomia. Using criteria set forth by Sims (1975), the paleoseismic evidence can be correlated to the magnitude of the deformation structures found in the glacial sediments. This research determined that the microstructures at Arrat's Mill, Meikleour and Glen Roy are consistent with a seismically induced origin. It has also been demonstrated that, even without the presence of macrostructures, the use of micromorphology techniques in detecting such activity within sediments is of immense value.

Husserl's approach to transcendental intersubjectivity

It is our intention in the course of the development of this thesis to give an account of how intersubjectivity is "eidetically" constituted by means of the application of the phenomenological reduction to our experience in the context of the thought of Edmund Husserl; contrasted with various representative thinkers in what H. Spiegelberg refers to as "the wider scene" of phenomenology. That is to say, we intend to show those structures of both consciousness and the relation which man has to the world which present themselves as the generic conditions for the possibility of overcoming our "radical sol itude" in order that we may gain access to the mental 1 ife of an Other as other human subject. It is clear that in order for us to give expression to these accounts in a coherent manner, along with their relative merits, it will be necessary to develop the common features of any phenomenological theory of consdousness whatever. Therefore, our preliminary inquiry, subordinate to the larger theme, shall be into some of the epistemological results of the application of the phenomenological method used to develop a transcendental theory of consciousness. Inherent in this will be the deliniation of the exigency for making this an lIintentional ll theory. We will then be able to see how itis possible to overcome transcendentally the Other as an object merely given among other merely given objects, and further, how this other is constituted specifically as other ego. The problem of transcendental intersubjectivity and its constitution in experience can be viewed as one of the most compelling, if not the most polemical of issues in phenomenology. To be sure, right from the beginning we are forced to ask a number of questions regarding Husserl's responses to the problem within the context of the methodological genesis of the Cartesian Meditations, and The Crisis of European Sciences and Transcendental Phenomenology. This we do in order to set the stage for amplification. First, we ask, has Husserl lived up to his goal, in this connexion, of an apodictic result? We recall that in his Logos article of 1911 he adminished that previous philosophy does not have at its disposal a merely incomplete and, in particular instances, imperfect doctrinal system; it simply has none whatever. Each and every question is herein controverted, each position is a matter of individual conviction, of the interpretation given byaschool, of a "point of view". 1. Moreover in the same article he writes that his goal is a philosophical system of doctrine that, after the gigantic preparatory work. of generations, really be- . gins from the ground up with a foundation free from doubt and rises up like any skilful construction, wherein stone is set upon store, each as solid as the other, in accord with directive insights. 2. Reflecting upon the fact that he foresaw "preparatory work of generations", we perhaps should not expect that he would claim that his was the last word on the matter of intersubjectivity. Indeed, with 2. 'Edmund Husserl, lIPhilosophy as a Rigorous Science" in Phenomenology and theCrisis6fPhilosophy, trans". with an introduction by Quentin Lauer (New York.: Harper & Row, 1965) pp. 74 .. 5. 2Ibid . pp. 75 .. 6. 3. the relatively small amount of published material by Husserl on the subject we can assume that he himself was not entirely satisfied with his solution. The second question we have is that if the transcendental reduction is to yield the generic and apodictic structures of the relationship of consciousness to its various possible objects, how far can we extend this particular constitutive synthetic function to intersubjectivity where the objects must of necessity always remain delitescent? To be sure, the type of 'object' here to be considered is unlike any other which might appear in the perceptual field. What kind of indubitable evidence will convince us that the characteristic which we label "alter-ego" and which we attribute to an object which appears to resemble another body which we have never, and can never see the whole of (namely, our own bodies), is nothing more than a cleverly contrived automaton? What;s the nature of this peculiar intentional function which enables us to say "you think just as I do"? If phenomenology is to take such great pains to reduce the takenfor- granted, lived, everyday world to an immanent world of pure presentation, we must ask the mode of presentation for transcendent sub .. jectivities. And in the end, we must ask if Husserl's argument is not reducible to a case (however special) of reasoning by analogy, and if so, tf this type of reasoning is not so removed from that from whtch the analogy is made that it would render all transcendental intersubjective understandtng impos'sible? 2. HistoticalandEidetic Priority: The Necessity of Abstraction 4. The problem is not a simple one. What is being sought are the conditions for the poss ibili:ty of experi encing other subjects. More precisely, the question of the possibility of intersubjectivity is the question of the essence of intersubjectivity. What we are seeking is the absolute route from one solitude to another. Inherent in this programme is the ultimate discovery of the meaning of community. That this route needs be lIabstract" requires some explanation. It requires little explanation that we agree with Husserl in the aim of fixing the goal of philosophy on apodictic, unquestionable results. This means that we seek a philosophical approach which is, though, not necessarily free from assumptions, one which examines and makes explicit all assumptions in a thorough manner. It would be helpful at this point to distinguish between lIeidetic ll priority, and JlhistoricallJpriority in order to shed some light on the value, in this context, of an abstraction.3 It is true that intersubjectivity is mundanely an accomplished fact, there havi.ng been so many mi.llions of years for humans to beIt eve in the exi s tence of one another I s abili ty to think as they do. But what we seek is not to study how this proceeded historically, but 3Cf• Maurice Natanson;·TheJburne in 'Self, a Stud in Philoso h and Social Role (Santa Cruz, U. of California Press, 1970 . rather the logical, nay, "psychological" conditions under which this is possible at all. It is therefore irrelevant to the exigesis of this monograph whether or not anyone should shrug his shoulders and mumble IIwhy worry about it, it is always already engaged". By way of an explanation of the value of logical priority, we can find an analogy in the case of language. Certainly the language 5. in a spoken or written form predates the formulation of the appropriate grammar. However, this grammar has a logical priority insofar as it lays out the conditions from which that language exhibits coherence. The act of formulating the grammar is a case of abstraction. The abstraction towards the discovery of the conditions for the poss; bi 1 ity of any experiencing whatever, for which intersubjective experience is a definite case, manifests itself as a sort of "grammar". This "grammar" is like the basic grammar of a language in the sense that these "rulesil are the ~ priori conditions for the possibility of that experience. There is, we shall say, an "eidetic priority", or a generic condition which is the logical antecedent to the taken-forgranted object of experience. In the case of intersubjectivity we readily grant that one may mundanely be aware of fellow-men as fellowmen, but in order to discover how that awareness is possible it is necessary to abstract from the mundane, believed-in experience. This process of abstraction is the paramount issue; the first step, in the search for an apodictic basis for social relations. How then is this abstraction to be accomplished? What is the nature of an abstraction which would permit us an Archimedean point, absolutely grounded, from which we may proceed? The answer can be discovered in an examination of Descartes in the light of Husserl's criticism. 3. The Impulse for Scientific Philosophy. The Method to which it Gives Rise. 6. Foremost in our inquiry is the discovery of a method appropriate to the discovery of our grounding point. For the purposes of our investigations, i.e., that of attempting to give a phenomenological view of the problem of intersubjectivity, it would appear to be of cardinal importance to trace the attempt of philosophy predating Husserl, particularly in the philosophy of Descartes, at founding a truly IIscientific ll philosophy. Paramount in this connexion would be the impulse in the Modern period, as the result of more or less recent discoveries in the natural sciences, to found philosophy upon scientific and mathematical principles. This impulse was intended to culminate in an all-encompassing knowledge which might extend to every realm of possible thought, viz., the universal science ot IIMathexis Universalis ll •4 This was a central issue for Descartes, whose conception of a universal science would include all the possible sciences of man. This inclination towards a science upon which all other sciences might be based waS not to be belittled by Husserl, who would appropriate 4This term, according to Jacab Klein, was first used by Barocius, the translator of Proclus into Latin, to designate the highest mathematical discipline. . 7. it himself in hopes of establishing, for the very first time, philosophy as a "rigorous science". It bears emphasizing that this in fact was the drive for the hardening of the foundations of philosophy, the link between the philosophical projects of Husserl and those of the philosophers of the modern period. Indeed, Husserl owes Descartes quite a debt for indicating the starting place from which to attempt a radical, presupositionless, and therefore scientific philosophy, in order not to begin philosophy anew, but rather for the first time.5 The aim of philosophy for Husserl is the search for apodictic, radical certitude. However while he attempted to locate in experience the type of necessity which is found in mathematics, he wished this necessity to be a function of our life in the world, as opposed to the definition and postulation of an axiomatic method as might be found in the unexpurgated attempts to found philosophy in Descartes. Beyond the necessity which is involved in experiencing the world, Husserl was searching for the certainty of roots, of the conditi'ons which underl ie experience and render it pOssible. Descartes believed that hi~ MeditatiOns had uncovered an absolute ground for knowledge, one founded upon the ineluctable givenness of thinking which is present even when one doubts thinking. Husserl, in acknowledging this procedure is certainly Cartesian, but moves, despite this debt to Descartes, far beyond Cartesian philosophy i.n his phenomenology (and in many respects, closer to home). 5Cf. Husserl, Philosophy as a Rigorous Science, pp. 74ff. 8 But wherein lies this Cartesian jumping off point by which we may vivify our theme? Descartes, through inner reflection, saw that all of his convictions and beliefs about the world were coloured in one way or another by prejudice: ... at the end I feel constrained to reply that there is nothing in a all that I formerly believed to be true, of which I cannot in some measure doubt, and that not merely through want of thought or through levity, but for reasons which are very powerful and maturely considered; so that henceforth I ought not the less carefully to refrain from giving credence to these opinions than to that which is manifestly false, if I desire to arrive at any certainty (in the sciences). 6 Doubts arise regardless of the nature of belief - one can never completely believe what one believes. Therefore, in order to establish absolutely grounded knowledge, which may serve as the basis fora "universal Science", one must use a method by which one may purge oneself of all doubts and thereby gain some radically indubitable insight into knowledge. Such a method, gescartes found, was that, as indicated above by hi,s own words, of II radical doubt" which "forbids in advance any judgemental use of (previous convictions and) which forbids taking any position with regard to their val idi'ty. ,,7 This is the method of the "sceptical epoche ll , the method of doubting all which had heretofor 6Descartes,Meditations on First Philosophy, first Med., (Libera 1 Arts Press, New York, 1954) trans. by L. LaFl eur. pp. 10. 7Husserl ,CrisiS of Eliroeari SCiences and Trariscendental Phenomenology, (Northwestern U. Press, Evanston, 1 7 ,p. 76. 9. been considered as belonging to the world, including the world itself. What then is left over? Via the process of a thorough and all-inclusive doubting, Descartes discovers that the ego which performs the epoche, or "reduction", is excluded from these things which can be doubted, and, in principle provides something which is beyond doubt. Consequently this ego provides an absolute and apodictic starting point for founding scientific philosophy. By way of this abstention. of bel ief, Desca'rtes managed to reduce the worl d of everyday 1 ife as bel ieved in, to mere 'phenomena', components of the rescogitans:. Thus:, having discovered his Archimedean point, the existence of the ego without question, he proceeds to deduce the 'rest' of the world with the aid of innate ideas and the veracity of God. In both Husserl and Descartes the compelling problem is that of establ ishing a scientific, apodictic phi'losophy based upon presuppos itionless groundwork .. Husserl, in thi.s regard, levels the charge at Descartes that the engagement of his method was not complete, such that hi.S: starting place was not indeed presupositionless, and that the validity of both causality and deductive methods were not called into question i.'n the performance of theepoche. In this way it is easy for an absolute evidence to make sure of the ego as: a first, "absolute, indubitablyexisting tag~end of the worldll , and it is then only a matter of inferring the absolute subs.tance and the other substances which belon.g to the world, along with my own mental substance, using a logically val i d deductive procedure. 8 8Husserl, E.;' Cartesian 'Meditation;, trans. Dorion Cairns (Martinus Nijhoff, The Hague, 1970), p. 24 ff.

Selected topics in fast atom bombardment (FAB) mass spectrometry a)specially designed probe tips and ion generation, b)structures of vitamin B6 schiff base complexes

This thesis can be broken down into two sections. Section one is a study . of the ionization mechanisms and the ion source optimization for Fast Atom Bombardment (FAB) ionization. For this study, several specially designed probe tips were created and tested under various experimental conditions. The aIm of this section is to understand the operating characteristics of a FAB IOn source better. The second section involves the study of several Vitamin B6 Schiff Base complexes using both positive and negative ion FAB MS. This section is an exploration of the usefulness of FAB MS as a structure probe for the metalcoordination complexes of Vitamin B6.

Solid state NMR chemical shifts as an alternative to diffraction data in the determination of SIC polytypic structures

Silicon carbide, which has many polytypic modifications of a very simple and very symmetric structure, is an excellent model system for exploring, the relationship between chemical shift, long-range dipolar shielding, and crystal structure in network solids. A simple McConnell equation treatment of bond anisotropy effects in a poly type predicts chemical shifts for silicon and carbon sites which agree well with the experiment, provided that contributions from bonds up to 100 A are included in the calculation. The calculated chemical shifts depend on three factors: the layer stacking sequence, electrical centre of gravity, and the spacings between silicon and carbon layers. The assignment of peaks to lattice sites is proved possible for three polytypes (6H, 15R, and 3C). The fact that the calculated chemical shifts are very sensitive to layer spacings provides us a potential way to detennine and refine a crystal structure. In this work, the layer spacings of 6H SiC have been calculated and are within X-ray standard deviations. Under this premise, the layer spacings of 15R have been detennined. 29Si and 13C single crystal nmr studies of 6H SiC polytype indicate that all silicons and carbons are magnetically anisotropic. The relationship between a magnetic shielding tensor component and layer spacings has been derived. The comparisons between experimental and semi-empirical chemical shielding tensor components indicate that the paramagnetic shielding of silicon should be included in the single crystal chemical shift calculation.

Determining rotational direction of rotation structures using prolate shaped grains within till

Micromorphology is used to analyze a wide range of sediments. Many microstructures have, as yet, not been analyzed. Rotation structures are the least understood of microstructures: their origin and development forms the basis of this thesis. Direction of rotational movement helps understand formative deformational and depositional processes. Twenty-eight rotation structures were analyzed through two methods of data extraction: (a) angle of grain rotation measured from Nikon NIS software, and (b) visual analyses of grain orientation, neighbouring grainstacks, lineations, and obstructions. Data indicates antithetic rotation is promoted by lubrication, accounting for 79% of counter-clockwise rotation structures while 21 % had clockwise rotation. Rotation structures are formed due to velocity gradients in sediment. Subglacial sediments are sheared due to overlying ice mass stresses. The grains in the sediment are differentially deformed. Research suggests rotation structures are formed under ductile conditions under low shear, low water content, and grain numbers inducing grain-to-grain interaction.