The Select Committee Report on Obesity (2004): The significant omission of parental views of their children's eating

Many studies have reported increasing levels of obesity and overweight in children. Recent policy developments have examined a range of influences on children's eating habits but have left largely unexamined the role of parents in general and mothers in particular. In this study we examined mothers’ understandings of healthy eating and of their influence on their children's eating patterns. Semi-structured interviews were conducted with nine mothers of children aged between 4 and 12 years of age. Interviewees displayed knowledge of recommended eating practices for their children but distinguished this knowledge from actual eating practices. Avoidance of negative social perceptions, pleasure in eating and opportunities for fast food were regarded as more important than eating in accordance with recommended nutritional guidelines. Moreover, the food choices made were viewed as positive alternatives to eating based on nutritional balance. These views pose a challenge for policy initiatives to address obesity and excess weight in children. Future initiatives should have increased regard for the everyday contexts within which children's eating patterns are understood and justified.

Vision based control for micro aerial vehicles : Application to sense and avoid

This work presents a collision avoidance approach based on omnidirectional cameras that does not require the estimation of range between two platforms to resolve a collision encounter. Our method achieves minimum separation between the two vehicles involved by maximising the view-angle given by the omnidirectional sensor. Only visual information is used to achieve avoidance under a bearing- only visual servoing approach. We provide theoretical problem formulation, as well as results from real flights using small quadrotors

Design, modelling and measurement of hybrid powerplant for unmanned aerial vehicles (UAVs)

The success or effectiveness for any aircraft design is a function of many trade-offs. Over the last 100 years of aircraft design these trade-offs have been optimized and dominant aircraft design philosophies have emerged. Pilotless aircraft (or uninhabited airborne systems, UAS) present new challenges in the optimization of their configuration. Recent developments in battery and motor technology have seen an upsurge in the utility and performance of electric powered aircraft. Thus, the opportunity to explore hybrid-electric aircraft powerplant configurations is compelling. This thesis considers the design of such a configuration from an overall propulsive, and energy efficiency perspective. A prototype system was constructed using a representative small UAS internal combustion engine (10cc methanol two-stroke) and a 600W brushless Direct current (BLDC) motor. These components were chosen to be representative of those that would be found on typical small UAS. The system was tested on a dynamometer in a wind-tunnel and the results show an improvement in overall propulsive efficiency of 17% when compared to a non-hybrid powerplant. In this case, the improvement results from the utilization of a larger propeller that the hybrid solution allows, which shows that general efficiency improvements are possible using hybrid configurations for aircraft propulsion. Additionally this approach provides new improvements in operational and mission flexibility (such as the provision of self-starting) which are outlined in the thesis. Specifically, the opportunity to use the windmilling propeller for energy regeneration was explored. It was found (in the prototype configuration) that significant power (60W) is recoverable in a steep dive, and although the efficiency of regeneration is low, the capability can allow several options for improved mission viability. The thesis concludes with the general statement that a hybrid powerplant improves the overall mission effectiveness and propulsive efficiency of small UAS.

Of hygiene and motivator factors : Views from “down under”

Comments on “Qualification Profile of University Professors in Business and Information Systems Engineering (BISE)”

Automated marine mammal detection from aerial imagery

This paper presents two algorithms to automate the detection of marine species in aerial imagery. An algorithm from an initial pilot study is presented in which morphology operations and colour analysis formed the basis of its working principle. A second approach is presented in which saturation channel and histogram-based shape profiling were used. We report on performance for both algorithms using datasets collected from an unmanned aerial system at an altitude of 1000 ft. Early results have demonstrated recall values of 48.57% and 51.4%, and precision values of 4.01% and 4.97%.

Detection of dugongs from unmanned aerial vehicles

Monitoring and estimation of marine populations is of paramount importance for the conservation and management of sea species. Regular surveys are used to this purpose followed often by a manual counting process. This paper proposes an algorithm for automatic detection of dugongs from imagery taken in aerial surveys. Our algorithm exploits the fact that dugongs are rare in most images, therefore we determine regions of interest partially based on color rarity. This simple observation makes the system robust to changes in illumination. We also show that by applying the extended-maxima transform on red-ratio images, submerged dugongs with very fuzzy edges can be detected. Performance figures obtained here are promising in terms of degree of confidence in the detection of marine species, but more importantly our approach represents a significant step in automating this type of surveys.

Pain : the views of elderly people living in long term residential care settings

While an individual's beliefs and attitudes have long been considered important factors in how people respond to pain, few studies have attempted to provide in-depth descriptions of the nature of such pain beliefs and attitudes The aim of this research was to investigate the views of pain and pain management practices held by elderly people living in long-term residential care settings Ten 60–90 minute focus group interviews, each involving around five elderly people, were conducted in four large, long-term residential care settings in Brisbane, Australia Categories of beliefs and attitudes regarding pain were identified following analysis of the verbatim transcripts of these interviews Findings suggest that many elderly people living in long-term residential care settings may have become resigned to pain, that they are ambivalent about the benefit of any action for their pain and that they may be reluctant to express their pain Implications of these beliefs and attitudes are discussed

Are we there yet? Early years reform in Queensland : stakeholder perspectives on the introduction of funded preschool programs in long day care services

Australian educators are currently engaging with wide-ranging, national early childhood reform that is reshaping early childhood education and care. The Australian reform agenda reflects many of the early childhood policy directions championed by bodies such as the Organisation for Economic Cooperation and Development and the United Nations Children's Education Fund, and is based on the dual discourse of (i) starting strong and (ii) investing in the early years. However, despite its traction in policy rhetoric and policy there is little empirical evidence of how reform is being played out. This paper reports on research undertaken in collaboration with the Queensland Office for Early Childhood Education and Care to generate sector feedback on one element of the reform agenda, the implementation of universal preschool in Queensland. The study aimed to determine the efficacy of the new policy in supporting the provision of 'approved preschool programs' within long day care services. Drawing together the views and experiences of a range of stakeholders, including peak organisations, service providers, directors, preschool teachers and government policy officers, it provides a situated case study of the implementation of universal preschool, and offers empirical evidence of how this policy is being played out at the local level. The paper identifies the opportunities and challenges in implementing universal preschool in Queensland that may have bearing on early childhood reform in Australia as well as other countries. Discussion of key findings is set within an overview of the ECEC policy agenda in Australia, with a particular focus on the commitment to universal preschool. Les éducateurs australiens s’engagent présentement dans une vaste réforme nationale de la petite enfance qui remodèle l'éducation et l’accueil de la petite enfance. Le programme de la réforme australienne reflète plusieurs des orientations en politique de la petite enfance soutenues par des organismes comme l'Organisation de coopération et de développement économiques (OCDE) et le Fonds des Nations Unies pour les enfants (UNICEF). Il s’appuie sur le double discours de (i) un bon départ et de (ii) l’investissement dans les premières années. Cependant, en dépit de son attrait en rhétorique de politique et en politique il y a peu de données empiriques sur la façon dont la réforme se déroule. Cet article rend compte de la recherche entreprise en collaboration avec le bureau de l'éducation et l’accueil à la petite enfance du Queensland afin d’obtenir une rétroaction du secteur sur un élément de la réforme, la mise sur pied du préscolaire universel dans le Queensland. L'étude visait à déterminer l'efficacité de la nouvelle politique pour soutenir la disposition «programmes préscolaires approuvés» dans les services de garde à temps plein. En regroupant les perspectives et les expériences d'une gamme d’intervenants, y compris d’importantes organisations, des prestataires de service, des directeurs, des enseignants du préscolaire et des fonctionnaires de politique gouvernementale, elle constitue une étude de cas localisée de l'exécution la mise sur pied du préscolaire universel, et fournit des données empiriques sur la façon dont cette politique se met en place au niveau local. L’article identifie les opportunités et les défis liés à l’implantation du préscolaire universel au Queensland, qui pourraient avoir une portée sur la réforme de petite enfance en Australie ainsi que dans d'autres pays. La discussion des principaux résultats est faite en lien avec un aperçu global de la politique d'éducation et d’accueil de la petite enfance en Australie, avec un accent particulier sur l'engagement envers le préscolaire universel. Los educadores australianos actualmente están involucrados en una amplia reforma de la educación temprana nacional que está revolucionando la educación preescolar y los servicios de cuidado. El programa de reforma Australiana refleja muchas de las direcciones políticas relacionadas con la infancia temprana incitadas por organismos como la Organización de Cooperación y Desarrollo Económicos y el Fondo Educacional Infantil de las Naciones Unidas, y se basa en el doble discurso de (i) empezando fuertemente e (ii) invertir en los primeros años. Sin embargo, a pesar de su política de tracción en retórica y política, hay pocos datos empíricos de cómo la reforma se está llevando a cabo. Este documento informa sobre las investigaciones llevadas a cabo en colaboración con la Oficina de Queensland de Educación tempana y cuidados, para generar comentarios del sector, sobre uno de los elementos de la agenda de reforma, la aplicación del preescolar universal en Queensland. El estudio tiene como objetivo determinar la eficacia de la nueva política para apoyar la prestación de "programas preescolares aprovados" dentro se los servicios de guardería y cuidado. Reuniendo los puntos de vista y las experiencias de una serie de interesados, entre ellos algunas organizaciones cumbre, proveedores de servicios, los directores, los maestros preescolares y oficiales de política y gobierno, se logra un estudio simulado de la implementación del preescolar universal, y ofrece evidencia empírica de cómo esta política se está llevando a cabo en el plano local. El documento identifica las oportunidades y desafíos en la implementación del preescolar universal en Queensland, que puede repercutir en la reforma de la indancia temprana en Australia, así como en otros países. La discusión de los resultados claves se encuentra en el interior de una visión de la agenda política de ECEC en Australia, con un enfoque particular en el compromiso con el preescolar universal.

Visual guidance for fixed-wing unmanned aerial vehicles using feature tracking : application to power line inspection

This thesis presents novel vision based control solutions that enable fixed-wing Unmanned Aerial Vehicles to perform tasks of inspection over infrastructure including power lines, pipe lines and roads. This is achieved through the development of techniques that combine visual servoing with alternate manoeuvres that assist the UAV in both following and observing the feature from a downward facing camera. Control designs are developed through techniques of Image Based Visual Servoing to utilise sideslip through Skid-to-Turn and Forward-Slip manoeuvres. This allows the UAV to simultaneously track and collect data over the length of infrastructure, including straight segments and the transition where these meet.

Mid- and near-infrared spectroscopic investigation of homogeneous cation distribution in MgxZnyAl(x+y)/2-layered double hydroxide (LDH)

In this report, a detailed FTIR fitting analysis was used to recognize Mg, Zn and Al homogeneous distribution in MgxZnyAl(x+y)/2-Layered double hydroxide (LDH) hydroxyl layer. In detail, OH-Mg2Al:OH-Mg3 ratios decreased from 95.2:4.8 (MIR) and 94.2:5.8 (NIR) to 58.9:41.1 (MIR) and 61.8:38.2 (NIR), when Mg:Al increased from 2.2:1.0 to 4.1:1.0 in MgAl-LDHs. These fitting results were similar with theoretical calculations of 94.3:5.7 and 59.0:41.0. In a further analysis of MgxZnyAl(x+y)/2-LDHs, OH bonded Zn2Mg, Zn2Al, MgZnAl, Mg2Al and Mg2Zn peaks were identified at 3420, 3430, 3445–3450, 3454 and 3545 cm-1, respectively. With the decrease of Mg:Zn from 3:1 to 1:3, metal-hydroxyl bands changed from OH-Mg2Al and MgZnAl (with a ratio of 49.4:50.6) to OH-MgZnAl and Zn2Al (with a ratio of 55.0:45.0). They were also similar with theoretical calculations of 47.6:52.4 and 54.6:45.4. As a result, these results show that there is an ordered cation distribution in MgxZnyAl(x+y)/2-LDH, and FTIR is feasible in recognizing this structure.

Non-linear position control for hover and automatic landing of unmanned aerial vehicles

This study presents a disturbance attenuation controller for horizontal position stabilisation for hover and automatic landings of a rotary-wing unmanned aerial vehicle (RUAV) operating close to the landing deck in rough seas. Based on a helicopter model representing aerodynamics during the landing phase, a non-linear state feedback H∞ controller is designed to achieve rapid horizontal position tracking in a gusty environment. Practical constraints including flapping dynamics, servo dynamics and time lag effect are considered. A high-fidelity closed-loop simulation using parameters of the Vario XLC gas-turbine helicopter verifies performance of the proposed horizontal position controller. The proposed controller not only increases the disturbance attenuation capability of the RUAV, but also enables rapid position response when gusts occur. Comparative studies show that the H∞ controller exhibits performance improvement and can be applied to ship/RUAV landing systems.

Automated aerial inspection guidance with improved turn planning

Aerial inspection of pipelines, powerlines, and other large linear infrastructure networks has emerged in a number of civilian remote sensing applications. Challenges relate to automating inspection flight for under-actuated aircraft with LiDAR/camera sensor constraints whilst subjected to wind disturbances. This paper presents new improved turn planning strategies with guidance suitable for automation of linear infrastructure inspection able to reduce inspection flight distance by including wind information. Simulation and experimental flight tests confirmed the flight distance saving, and the proposed guidance strategies exhibited good tracking performance in a range of wind conditions.

Effects of substrate temperature on the microstructure of YBa2Cu3O7-δ films grown on (001) Y-ZrO2 substrates

High-quality YBa2Cu3O7-δ films grown on (001) single-crystal Y-ZrO2 substrates by pulsed laser deposition have been studied as a function of substrate temperature using transmission electron microscopy. A transition from epitaxial films to c-axis oriented polycrystalline films was observed at 740°C. An intermediate, polycrystalline, BaZrO3 layer was formed from a reaction between the film and the substrate. A dominant orientation relationship of [001] YBCO//[001]int. layer//[001]YSZ and [110] YBCO//[110]int. layer//[100]YSZ was observed. The formation of grain boundaries in the films resulted in an increased microwave surface resistance and a decreased critical-current density. The superconducting transition temperature remained fairly constant at about 90 K.

Early stages of growth of YBa2Cu3O7-δ high Tc superconducting films on (001) Y-ZrO2 substrates

The early stages of growth of high quality YBa2Cu 3O7-δ (YBCO) films grown on (001) Y-ZrO2 (YSZ) substrates by pulsed laser deposition have been studied using a combination of atomic force microscopy and transmission electron microscopy. A one unit cell thick YBCO layer and relatively large CuO particles formed in the initial stages. Additional YBCO grew on top of the first layer in the form of one or a few unit cell high c-axis oriented islands about 30 nm in diameter. The rounded islands subsequently coalesced into faceted domains. Elongated Y 2BaCuO5 particles nucleated after the first layer of YBCO. A highly textured BaZrO3 layer formed between the YSZ and the YBCO with a cube-on-cube dominant orientation relationship with respect to the YBCO film.

Microstructure of an artificial grain boundary weak link in an YBa2Cu3O(7-δ) thin film grown on a (100)(110), [001]-tilt Y-ZrO2 bicrystal

The microstructure of an artificial grain boundary in an YBa2Cu3O7-δ (YBCO) thin film grown on a (100)(110), [001]-tilt yttria-stabilized-zirconia (YSZ) bicrystal substrate has been studied using transmission electron microscopy (TEM). The orientation relationship between the YBCO film and the YSZ substrate was [001]YBCO∥[001]YSZ and [110]YBCO∥[100]YSZ for each half of the bicrystal film. However, the exact boundary geometry of the bicrystal substrate was not transferred to the film. The substrate boundary was straight while the film boundary was wavy. In several cases there was bending of the lattice confined within a distance of a few basal-plane lattice spacings from the boundary plane and microfaceting. No intergranular secondary phase was observed but about 25% of the boundary was covered by c-axis-tilted YBCO grains and a-axis-oriented grains, both of which were typically adjacent to CuO grains or surrounded by a thin Cu-rich amorphous layer.