Media web sites interactivity: Searching new ways to dialog with their users

Currently the media have made many new tools on their websites in order to broaden the dialogue with its users, a feature that has been called interactivity. The objective of this research is to describe the interactive resources of Chilean media websites. The analysis was conducted at 20 sites using a pattern of six dimensions with interactive forms which are today using identified. The findings indicate that digital media Chileans are expanding the possibilities of dialogue with users on social media, especially Twitter and Facebook, and the mediauser interaction is monological, that is to say, from the media to the user, but with very low feedback.

Food for Pollinators: Quantifying the Nectar and Pollen Resources of Urban Flower Meadows

Planted meadows are increasingly used to improve the biodiversity and aesthetic amenity value of urban areas. Although many ‘pollinator-friendly’ seed mixes are available, the floral resources these provide to flower-visiting insects, and how these change through time, are largely unknown. Such data are necessary to compare the resources provided by alternative meadow seed mixes to each other and to other flowering habitats. We used quantitative surveys of over 2 million flowers to estimate the nectar and pollen resources offered by two exemplar commercial seed mixes (one annual, one perennial) and associated weeds grown as 300m2 meadows across four UK cities, sampled at six time points between May and September 2013. Nectar sugar and pollen rewards per flower varied widely across 65 species surveyed, with native British weed species (including dandelion, Taraxacum agg.) contributing the top five nectar producers and two of the top ten pollen producers. Seed mix species yielding the highest rewards per flower included Leontodon hispidus, Centaurea cyanus and C. nigra for nectar, and Papaver rhoeas, Eschscholzia californica and Malva moschata for pollen. Perennial meadows produced up to 20x more nectar and up to 6x more pollen than annual meadows, which in turn produced far more than amenity grassland controls. Perennial meadows produced resources earlier in the year than annual meadows, but both seed mixes delivered very low resource levels early in the year and these were provided almost entirely by native weeds. Pollen volume per flower is well predicted statistically by floral morphology, and nectar sugar mass and pollen volume per unit area are correlated with flower counts, raising the possibility that resource levels can be estimated for species or habitats where they cannot be measured directly. Our approach does not incorporate resource quality information (for example, pollen protein or essential amino acid content), but can easily do so when suitable data exist. Our approach should inform the design of new seed mixes to ensure continuity in floral resource availability throughout the year, and to identify suitable species to fill resource gaps in established mixes.

Optimization of wastepaper sludge ash (WSA) in robust cementitious systems

Abstract : Wastepaper sludge ash (WSA) is generated by a cogeneration station by burning wastepaper sludge. It mainly consists of amorphous aluminosilicate phase, anhydrite, gehlenite, calcite, lime, C2S, C3A, quartz, anorthite, traces of mayenite. Because of its free lime content (~10%), WSA suspension has a high pH (13). Previous researchers have found that the WSA composition has poor robustness and the variations lead to some unsoundness for Portland cement (PC) blended WSA concrete. This thesis focused on the use of WSA in different types of concrete mixes to avoid the deleterious effect of the expansion due to the WSA hydration. As a result, WSA were used in making alkali-activated materials (AAMs) as a precursor source and as a potential activator in consideration of its amorphous content and the high alkaline nature. Moreover, the autogenous shrinkage behavior of PC concrete at low w/b ratio was used in order to compensate the expansion effect due to WSA. The concrete properties as well as the volume change were investigated for the modified WSA blended concrete. The reaction mechanism and microstructure of newly formed binder were evaluated by X-ray diffraction (XRD), calorimetry, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). When WSA was used as precursor, the results showed incompatible reaction between WSA and alkaline solution. The mixtures were not workable and provided very low compressive strength no matter what kinds of chemical activators were used. This was due to the metallic aluminum in WSA, which releases abundant hydrogen gas when WSA reacts with strong alkaline solution. Besides, the results of this thesis showed that WSA can activate the glassy phase contained in slag, glass powder (GP) and class F fly ash (FFA) with an optimum blended ratio of 50:50. The WSA/slag (mass ratio of 50:50) mortar (w/b of 0.47) attained 46 MPa at 28 days without heat curing assistance. A significant fast setting was noticed for the WSA-activated binder due to the C3A phase, free lime and metallic aluminum contained in the WSA. Adding 5% of gypsum can delay the fast setting, but this greatly increased the potential risk of intern sulfate attack. The XRD, TGA and calorimetry analyses demonstrated the formation of ettringite, C-S-H, portlandite, hydrogarnet and calcium carboaluminate in the hydrated binder. The mechanical performance of different binder was closely related to the microstructure of corresponding binder which was proved by the SEM observation. The hydrated WSA/slag and WSA/FFA binder formed a C-A-S-H type of gel with lower Ca/Si ratio (0.47~1.6). A hybrid gel (i.e. C-N-A-S-H) was observed for the WSA/GP binder with a very low Ca/Si ratio (0.26) and Na/Si ratio (0.03). The SEM/EDX analyses displayed the formation of expansive gel (ettringite and thaumasite) in the gypsum added WSA/slag concrete. The gradual emission of hydrogen gas due to the reaction of WSA with alkaline environment significantly increased the porosity and degraded the microstructure of hydrated matrix after the setting. In the last phase of this research WSA-PC blended binder was tailored to form a high autogenous shrinkage concrete in order to compensate the initial expansion. Different binders were proportioned with PC, WSA, silica fume or slag. The microstructure and mechanical properties of concrete can be improved by decreasing w/b ratios and by incorporating silica fume or slag. The 28-day compressive strength of WSA-blended concrete was above 22 MPa and reached 45 MPa when silica fume was added. The PC concrete incorporating silica fume or slag tended to develop higher autogenous shrinkage at low w/b ratios, and thus the ternary binder with the addition of WSA inhibited the long term shrinkage due to the initial expansion property to WSA. In the restrained shrinkage test, the concrete ring incorporating the ternary binder (PC/WSA/slag) revealed negligible potential to cracking up to 96 days as a result of the offset effect by WSA expansion. The WSA blended regular concrete could be produced for potential applications with reduced expansion, good mechanical property and lower permeability.

A LOFAR mini-survey for low-frequency radio emission from the nearest brown dwarfs

We have conducted a mini-survey for low-frequency radio emission from some of the closest brown dwarfs to the Sun with rapid rotation rates: SIMP J013656.5 +093347, WISEPC 150649.97+702736.0, and WISEPA J174124.26+255319.5.We have placed robust 3s upper limits on the flux density in the 111 – 169 MHz frequency range for these targets: WISE 1506: < 0:72 mJy; WISE 1741: < 0:87 mJy; SIMP 0136: < 0:66 mJy. At 8 hours of integration per target to achieve these limits, we find that systematic and detailed study of this class of object at LOFAR frequencies will require a substantial dedication of resources.

Low dose gemcitabine-loaded lipid nanocapsules target monocytic myeloid-derived suppressor cells and potentiate cancer immunotherapy

International audience

Low birth weight and cardiovascular risk in a Portuguese sample

The aim was to evaluate whether it had a similar effect in a Portuguese sample and if low weight classes – low weight (LW <2500g), very low weight (VLW <1500g) and extremely low weight (ELW <1000g) – had statistically significant differences between them.

Rapid continuous chemical analysis of meat chicken shed emissions by SIFT–MS

Assessing and addressing odour impacts from poultry production is extremely difficult and subjective because the odorants involved and their dynamics over time and space are poorly understood. This knowledge gap is due, in part, to the lack of suitable analytical tools for measuring and monitoring odorants in the field. The emergence of Selected Ion Flow Tube – Mass Spectrometry (SIFT–MS) and similar instruments is changing that. These tools can rapidly quantify targeted odorants in ambient air in real time, even at very low concentrations. Such data is essential for developing better odour abatement strategies, assessment methods and odour dispersion models. This project trialled a SIFT–MS to determine its suitability for assessing the odorants in meat chicken shed emissions over time and space. This report details evaluations in New Zealand and Australia to determine the potential of SIFT–MS as a tool for the chicken meat industry, including odour measurement (as a proxy for dynamic olfactometry). The report is specifically targeted at those funding and conducting poultry odour research. It will be of interest to those involved with environmental odour monitoring and assessment in general. The high upfront cost of SIFT–MS will lead to potential users wanting compelling evidence that SIFT–MS will meet their needs before they invest in one.

Factors associated with institutional delivery in Dangila district, North West Ethiopia: a cross-sectional study.

Introduction: Childbirth in a health institution has been shown to be associated with lower rates of maternal and neonatal mortality. However, about 85% of mothers in Ethiopia deliver at home. Objective: To assess factors associated with institutional delivery service utilization among women who gave birth within one year prior to the study in Dangila district. Methods: A cross-sectional study was conducted from February 01-28, 2015. A total of 763 mothers were interviewed using structured questionnaire. SPSS version 20 was used for analysis. Crude and adjusted Odds ratios were computed for selected variables. A P-value less than 0.05 was considered statistical significant. Results: Only 18.3% of mothers gave birth at health facilities. Knowledge on danger signs [AOR=2.0, 95% CI: (1.1, 3.4)], plan to give birth at health institution [AOR=5.4, 95% CI: (3.0, 9.6)], having ANC follow up during pregnancy [AOR=12.9, 95% CI: (5.0, 33.3)] and time taken to get to a nearby health institution [AOR=5.1, 95% CI: (2.9, 9.1)] were associated with institutional delivery service utilization. Conclusion: Institutional delivery was very low. Knowledge about danger signs, having ANC visits, and time were factors associated with institutional delivery service utilization. Thus,the findings recommend repeated re-enforcement of institutional delivery service utilization through professionals. And also, the findings recommend promotion of institutional delivery service utilization through mass media.

Studies of antihypertensive drug persistence and adherence in the Glasgow Blood Pressure Clinic

Hypertension (HTN) is a major risk factor for cardiovascular diseases including stroke, coronary heart disease (CHD), chronic renal failure, peripheral vascular disease, myocardial infarction, congestive heart failure and premature death. The prevalence of HTN in Scotland is very high and although a high proportion of the patients receive antihypertensive medications, blood pressure (BP) control is very low. Recommendations for starting a specific antihypertensive class have been debated between various guidelines over the years. Some guidelines and HTN studies have preferred to start with a combination of an antihypertensive class instead of using a single therapy, and they have found greater BP reductions with combination therapies than with monotherapy. However, it has been shown in several clinical trials that 20% to 35% of hypertensive patients could not achieve the target BP, even though they received more than three antihypertensive medications. Several factors were found to affect BP control. Adherence and persistence were considered as the factors contributing the most to uncontrolled hypertension. Other factors such as age, sex, body mass index (BMI), alcohol intake, baseline systolic BP (SBP), and the communication between physicians and patients have been shown to be associated with uncontrolled BP and resistant hypertension. Persistence, adherence and compliance are interchangeable terms and have been used in the literature to describe a patient’s behaviour with their antihypertensive drugs and prescriptions. The methods used to determine persistence and adherence, as well as the inclusion and exclusion criteria, vary between persistence and adherence studies. The prevalence of persistence and adherence have varied between these studies, and were determined to be high in some studies and low in others. The initiation of a specific antihypertensive class has frequently been associated with an increase or decrease in adherence and persistence. The tolerability and efficacy of the initial antihypertensive class have been the most common methods of explaining this association. There are also many factors that suggest a relationship with adherence and persistence. Some factors in previous studies, such as age, were frequently associated with adherence and persistence. On the other hand, relationships with certain factors have varied between the studies. The associations of age, sex, alcohol use, smoking, baseline systolic blood pressure (SBP) and diastolic BP (DBP), the presence of comorbidities, an increase in the number of pills and the relationship between patients and physicians with adherence and persistence have been the most commonly investigated factors. Most studies have defined persistence in terms of a patient still taking medication after a period of time. A medication possession ratio (MPR) ≥ 80 has been used to define compliance. Either of these terminologies, or both, have been used to estimate adherence. In this study, I used the same definition for persistence to identify patients who have continued with their initial treatment, and used persistence and MPR to define patients who adhered to their initial treatment. The aim of this study was to estimate the prevalence of persistence and adherence in Scotland. Also, factors that could have had an effect on persistence and adherence were studied. The number of antihypertensive drugs taken by patients during the study and factors that led to an increase in patients being on a combination therapy were also evaluated. The prevalence of resistance and BP control were determined by taking the BP after the last drug had been taken by persistent patients during five follow-up studies. The relationship of factors such as age, sex, BMI, alcohol use, smoking, estimated glomerular filtration rate (eGFR), and albumin levels with BP reductions for each antihypertensive class were determined. Information Services Division (ISD) data, which includes all antihypertensive drugs, were collected from pharmacies in Scotland and linked to the Glasgow Blood Pressure Clinic (GBPC) database. This database also includes demographic characteristics, BP readings and clinical results for all patients attending the GBPC. The case notes for patients who attended the GBPC were reviewed and all new antihypertensive drugs that were prescribed between visits, BP before and after taking drugs, and any changes in the hypertensive drugs were recorded. A total of 4,232 hypertensive patients were included in the first study. The first study showed that angiotensin converting enzyme inhibitor (ACEI) and beta-blockers (BB) were the most prescribed antihypertensive classes between 2004 and 2013. Calcium channel blockers (CCB), thiazide diuretics and angiotensin receptor blockers (ARB) followed ACEI and BB as the most prescribed drugs during the same period. The prescription trend of the antihypertensive class has changed over the years with an increase in prescriptions for ACEI and ARB and a decrease in prescriptions for BB and diuretics. I observed a difference in antihypertensive class prescriptions by age, sex, SBP and BMI. For example, CCB, thiazide diuretics and alpha-blockers were more likely to be prescribed to older patients, while ACEI, ARB or BB were more commonly prescribed for younger patients. In a second study, 4,232 and 3,149 hypertensive patients were included to investigate the prevalence of persistence in the Scottish population in 1- and 5-year studies, respectively. The prevalence of persistence in the 1-year study was 72.9%, while it was only 62.8% in the 5-year study. Those patients taking ARB and ACEI showed high rates of persistence and those taking diuretics and alpha blockers had low rates of persistence. The association of persistence with clinical characteristics was also investigated. Younger patients were more likely to totally stop their treatment before restarting their treatment with other antihypertensive drugs. Furthermore, patients who had high SBP tended to be non-persistent. In a third study, 3,085 and 1,979 patients who persisted with their treatment were included. In the first part of the study, MPR was calculated, and patients with an MPR ≥ 80 were considered as adherent. Adherence rates were 29.9% and 23.4% in the 1- and 5-year studies, respectively. Patients who initiated the study with ACEI were more likely to adhere to their treatments. However, patients who initiated the study with thiazide diuretics were less likely to adhere to their treatments. Sex, age and BMI were different between the adherence and non-adherence groups. Age was an independent factor affecting adherence rates during both the 1- and 5-year studies with older patients being more likely to be adherent. In the second part of the study, pharmacy databases were checked with patients' case notes to compare antihypertensive drugs that were collected from the pharmacy with the antihypertensive prescription given during the patient’s clinical visit. While 78.6% of the antihypertensive drugs were collected between clinical visits, 21.4% were not collected. Patients who had more days to see the doctor in the subsequent visit were more likely to not collect their prescriptions. In a fourth study, 3,085 and 1,979 persistent patients were included to calculate the number of antihypertensive classes that were added to the initial drug during the 1-year and 5-year studies, respectively. Patients who continued with treatment as a monotherapy and who needed a combination therapy were investigated during the 1- and 5-year studies. In all, 55.8% used antihypertensive drugs as a monotherapy and 44.2% used them as a combination therapy during the 1-year study. While 28.2% of patients continued with treatment without the required additional therapy, 71.8% of the patients needed additional therapy. In all, 20.8% and 46.5% of patients required three different antihypertensive classes or more during the 1-year and 5-year studies, respectively. Patients who started with ACEI, ARB and BB were more likely to continue as monotherapy and less likely to need two more antihypertensive drugs compared with those who started with alpha-blockers, non-thiazide diuretics and CCB. Older ages, high BMI levels, high SBP and high alcohol intake were independent factors that led to an increase in the probability of patients taking combination therapies. In the first part of the final study, BPs were recorded after the last drug had been taken during the 5 year study. There were 815 persistent patients who were assigned for this purpose. Of these, 39% had taken one, two or three antihypertensive classes and had controlled BP (controlled hypertension [HTN]), 29% of them took one or two antihypertensive classes and had uncontrolled BP (uncontrolled HTN), and 32% of the patients took three antihypertensive classes or more and had uncontrolled BP (resistant HTN). The initiation of an antihypertensive drug and the factors affecting BP pressure were compared between the resistant and controlled HTN groups. Patients who initiated the study with ACEI were less likely to be resistant compared with those who started with alpha blockers and non-thiazide diuretics. Older patients, and high BMI tended to result in resistant HTN. In the second part of study, BP responses for patients who initiated the study with ACEI, ARB, BB, CCB and thiazide diuretics were compared. After adjusting for risk factors, patients who initiated the study with ACEI and ARB were more respondent than those who took CCB and thiazide diuretics. In the last part of this study, the association between BP reductions and factors affecting BP were tested for each antihypertensive drug. Older patients responded better to alpha blockers. Younger patients responded better to ACEI and ARB. An increase in BMI led to a decreased reduction in patients on ACEI and diuretics (thiazide and non-thiazide). An increase in albumin levels and a decrease in eGFR led to decreases in BP reductions in patients on thiazide diuretics. An increase in eGFR decreased the BP response with ACEI. In conclusion, although a high percentage of hypertensive patients in Scotland persisted with their initial drug prescription, low adherence rates were found with these patients. Approximately half of these patients required three different antihypertensive classes during the 5 years, and 32% of them had resistant HTN. Although this study was observational in nature, the large sample size in this study represented a real HTN population, and the large pharmacy data represented a real antihypertensive population, which were collected through the support of prescription data from the GBPC database. My findings suggest that ACEI, ARB and BB are less likely to require additional therapy. However, ACEI and ARB were better tolerated than BB in that they were more likely to be persistent than BB. In addition, users of ACEI, and ARB have good BP response and low resistant HTN. Linkage patients who participated in these studies with their morbidity and mortality will provide valuable information concerning the effect of adherence on morbidity and mortality and the potential benefits of using ACEI or ARB over other drugs.

Application of fuzzy logic for the evaluation of livestock slaughtering

A lógica fuzzy admite infinitos valores lógicos intermediários entre o falso e o verdadeiro. Com esse princípio, foi elaborado neste trabalho um sistema baseado em regras fuzzy, que indicam o índice de massa corporal de animais ruminantes com objetivo de obter o melhor momento para o abate. O sistema fuzzy desenvolvido teve como entradas as variáveis massa e altura, e a saída um novo índice de massa corporal, denominado Índice de Massa Corporal Fuzzy (IMC Fuzzy), que poderá servir como um sistema de detecção do momento de abate de bovinos, comparando-os entre si através das variáveis linguísticas )Muito BaixaM, ,BaixaB, ,MédiaM, ,AltaA e Muito AltaM. Para a demonstração e aplicação da utilização deste sistema fuzzy, foi feita uma análise de 147 vacas da raça Nelore, determinando os valores do IMC Fuzzy para cada animal e indicando a situação de massa corpórea de todo o rebanho. A validação realizada do sistema foi baseado em uma análise estatística, utilizando o coeficiente de correlação de Pearson 0,923, representando alta correlação positiva e indicando que o método proposto está adequado. Desta forma, o presente método possibilita a avaliação do rebanho, comparando cada animal do rebanho com seus pares do grupo, fornecendo desta forma um método quantitativo de tomada de decisão para o pecuarista. Também é possível concluir que o presente trabalho estabeleceu um método computacional baseado na lógica fuzzy capaz de imitar parte do raciocínio humano e interpretar o índice de massa corporal de qualquer tipo de espécie bovina e em qualquer região do País.

Induced Damping on Vibrating Circular Plates Submerged in still Fluid

When a structure vibrates immersed in a fluid it is known that the dynamic properties of the system are modified. The surrounding fluid will, in general, contribute to the inertia, the rigidity and the damping coefficient of the coupled fluid-structure system. For light structures, like spacecraft antennas, even when the fluid is air the contribution to the dynamic properties can be important. For not so light structures the ratio of the equivalent fluid/structure mass and rigidity can be very small and the fluid contribution could be neglected. For the ratio of equivalent fluid/structure damping both terms are of the same order and therefore the fluid contribution must be studied. The working life of the spacecraft structure would be on space and so without any surrounding fluid. The response of a spacecraft structure on its operational life would be attenuated by the structural damping alone but when the structure is dynamically tested on the earth the dynamic modal test is performed with the fluid surrounding it. The results thus are contaminated by the effects of the fluid. If the damping added by the fluid is of the same order as the structural damping the response of the structure in space can be quite different to the response predicted on earth. It is therefore desirable to have a method able to determine the amount of damping induced by the fluid and that should be subtracted of the total damping measured on the modal vibration test. In this work, a method for the determination of the effect of the surrounding fluid on the dynamic characteristics of a circular plate has been developed. The plate is assumed to vibrate harmonically with the vacuum modes and the generalized forces matrix due to the fluid is thus computed. For a compressible fluid this matrix is formed by complex numbers including terms of inertia, rigidity and damping. The matrix due to the fluid loading is determined by a boundary element method (BEM). The BEM used is of circular rings on the plate surface so the number of elements to obtain an accurate result is very low. The natural frequencies of the system are computed by an iteration procedure one by one and also the damping fluid contribution. Comparisons of the present method with various experimental data and other theories show the efficiency and accuracy of the method for any support condition of the plate.

Adição de resíduo cerâmico em pastas geopoliméricas para cimentação de poços de petróleo

The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic

Isolamento e caracterização biológica e bioquímica de um activador do factor x da coagulação presente no veneno da serpente Bothrops erythromelas

Dissertação de Mestrado Integrado em Medicina Veterinária

Aproveitamento de resíduo de beneficiamento do caulim na produção de porcelanato cerâmico

Nowadays, industries from all sectors have great concerns over the disposition of the residues generated along the productive process. This is not different in the mineral sector, as this generates great volumes of residues. It was verified that the kaolin improvement industry generates great volumes of residue basically constituted of kaolinite, muscovite mica and quartz, which are basic constitution elements to formularisations of ceramics masses to the production of covering of stoneware tiles type. This happens because the methodology applied to the improvement process is still very rudimentary, what causes a very low yield, only ¼ from all the material volume that enters the improvement process, in the end, is marketable. The disposal of this residue, in a general way, causes a very big negative environmental impact, what has justified the researches efforts aiming to find a rational solution to this problem. In this way, the intention of this present work is the utilization of this residue in the manufacture of products to high quality ceramics covering, stoneware tiles in an industrial scale. For this purpose, the influence of the addition of the residue to a standard ceramics mass used by a ceramics sector company, already established in the market, with the intention of verifying the possibility of use of this residue as the mass complementary raw material and even the possible partial or total substitution of one of the components of the mass for the raw material in evidence will be studied. To the accomplishment of this work, the kaolin improvement residue generated by an industry of exploitation and improvement of kaolin, located in the region of Equador-RN, in the levels 1,2,4,8, 16 and 32% will be added to the standard mass already used for the production of stoneware tiles. The raw materials used, kaolin residue and the standard mass, were characterized through DRX, FRX, DTA, TGA and dilatometry. After the sintering of the bodies of test, tests of water absorption, apparent porosity, post burning linear retraction, apparent specific mass and flexural strength (3 point bending) were realized to determinate the technological properties of these materials. The results show the studied residue can be considered raw material of great potential to the industry of floor and ceramics covering of the stoneware tiles type

A survey on the composition of wines made with grapes produced by an organic system.

Summary There is concern about the health problems caused by pesticides in humans, which has led some grape producers to adopt organic procedures in their vineyards, and a certain amount of these grapes are directed to winemaking. Despite the approval awarded to this organic grape production by the certified organizations, there has been a demand to carry out a survey to determine the physicochemical composition of the wine derived from these products. Some of these wines were made from a single grape variety and others from more than one. For this survey, the samples consisted of five bottles of each type of wine, acquired from wineries and supermarkets in the Serra Gaúcha region, RS, Brazil. The analyses were carried out by physicochemical methods: volatile compounds by gas chromatography; minerals and trace elements by inductively coupled plasma optical emission spectrometry; and pesticide residues by liquid chromatography-mass spectrometry. The results showed that in general the physicochemical composition of these wines was within the limits established by Brazilian legislation. The mineral and trace element concentrations were very low and pesticide residues were not detected (MRL = 10 μg.kg?1) in any of the wines. Resumo: Há preocupação em relação a problemas causados por pesticidas no ser humano, o que levou uma parcela de viticultores a adotar procedimentos de agricultura orgânica em seus vinhedos. Assim, devido a essa preocupação, eles estão produzindo uva pelo sistema orgânico, sendo que uma parte dessa produção é direcionada à elaboração de vinho. Apesar de essas uvas terem sido aprovadas por entidades certificadoras, houve demanda para a realização de um levantamento para determinar a composição dos vinhos delas derivados. Portanto, cinco garrafas de cada tipo de vinho foram coletadas em vinícolas e supermercados da Serra Gaúcha, Rio Grande do Sul, sendo uma parte de vinhos varietais e outra, de cortes de diferentes variedades. As análises foram feitas por métodos físico-químicos: compostos voláteis, por cromatografia gasosa; minerais e elementos-traço, por espectrometria de emissão ótica com plasma acoplado indutivamente, e resíduos de pesticidas, por cromatografia líquida-espectrometria de massa. Os resultados mostram que a composição físico-química desses vinhos e dos minerais situou-se, em geral, dentro dos limites da legislação brasileira. As concentrações de minerais e de elementos-traço foram muito baixas, e não foram detectados resíduos de pesticidas (LMR = 10 μg.kg?1) em nenhum vinho.