Effects of specimen geometry and loading mode on crack growth resistance curves of a high-strength pipeline girth weld

This work presents an investigation of the ductile tearing properties for a girth weld made of an API 5L X80 pipeline steel using experimentally measured crack growth resistance curves. Use of these materials is motivated by the increasing demand in the number of applications for manufacturing high strength pipes for the oil and gas industry including marine applications and steel catenary risers. Testing of the pipeline girth welds employed side-grooved, clamped SE(T) specimens and shallow crack bend SE(B) specimens with a weld centerline notch to determine the crack growth resistance curves based upon the unloading compliance (UC) method using the single specimen technique. Recently developed compliance functions and η-factors applicable for SE(T) and SE(B) fracture specimens with homogeneous material and overmatched welds are introduced to determine crack growth resistance data from laboratory measurements of load-displacement records.

Experimental model identification of open-frame underwater vehicles

Most of the works published on hydrodynamic parameter identification of open-frame underwater vehicles focus their attention almost exclusively on good coherence between simulated and measured responses, giving less importance to the determination of “actual values” for hydrodynamic parameters. To gain insight into hydrodynamic parameter experimental identification of open-frame underwater vehicles, an experimental identification procedure is proposed here to determine parameters of uncoupled and coupled models. The identification procedure includes: (i) a prior estimation of actual values of the forces/torques applied to the vehicle, (ii) identification of drag parameters from constant velocity tests and (iii) identification of inertia and coupling parameters from oscillatory tests; at this stage, the estimated values of drag parameter obtained in item (ii) are used. The procedure proposed here was used to identify the hydrodynamic parameters of LAURS—an unmanned underwater vehicle developed at the University of São Paulo. The thruster–thruster and thruster–hull interactions and the advance velocity of the vehicle are shown to have a strong impact on the efficiency of thrusters appended to open-frame underwater vehicles, especially for high advance velocities. Results of tests with excitation in 1-DOF and 3-DOF are reported and discussed, showing the feasibility of the developed procedure.

Underwater towed video: a useful tool to rapidly assess elasmobranch populations in large marine protected areas

Elasmobranch stock assessment studies are usually made through fisheries surveys data. However, in large marine protected areas (MPAs) the use of destructive techniques must be dismissed in order to avoid population impacts. In 2005, while conducting a marine habitat survey in two marine Special Areas of Conservation (Sebadales de Playa de Inglés and Franja Marina de Mogán) in south Gran Canary Island (Canary Islands, Spain) with underwater towed video (UTV) and underwater visual census (UVC) transects, we recognized the opportunity rose to assess elasmobranch populations through UTV. Number of observed species and specimens, overall field work effort and total surveyed area were determined and compared between methods. Mean observations per day per unit of time (MOPUT) and mean observations per day per unit of surveyed area (MOPUA) were also compared through Mann–Whitney rank sum statistical test (α=0.05). Data analysis demonstrated that UTV is a very useful tool to rapidly assess elasmobranch populations in large MPAs in good visibility underwater environments. It can assess larger areas than UVC with the same effort (statistically significant difference found for the MOPUT; p=<0.001), leading to more observed species (5 vs 2) and specimens (46 vs 3) per day of work, with no loss in resolution power (MOPUA values were not significantly different between UTV and UVC; p=0.104).

Monitoring Ploughing Activities during Submarine Pipeline Construction on different Seabed Substrata

Máster en Oceanografía

Contributions to underwater glider path planning

[ES] La Planificación de Rutas o Caminos es un disciplina de Robótica que trata la búsqueda de caminos factibles u óptimos. Para la mayoría de vehículos y entornos, no es un problema trivial y por tanto nos encontramos con un gran diversidad de algoritmos para resolverlo, no sólo en Robótica e Inteligencia Artificial, sino también como parte de la literatura de Optimización, con Métodos Numéricos y Algoritmos Bio-inspirados, como Algoritmos Genéticos y el Algoritmo de la Colonia de Hormigas. El caso particular de escenarios de costes variables es considerablemente difícil de abordar porque el entorno en el que se mueve el vehículo cambia con el tiempo. El presente trabajo de tesis estudia este problema y propone varias soluciones prácticas para aplicaciones de Robótica Submarina.

Underwater mapping using sonar

[ES]El proyecto contiene módulos de simulación, procesado de datos, mapeo y localización, desarrollados en C++ utilizando ROS (Robot Operating System) y PCL (Point Cloud Library). Ha sido desarrollado bajo el proyecto de robótica submarina AVORA.Se han caracterizado el vehículo y el sensor, y se han analizado diferentes tecnologías de sensores y mapeo. Los datos pasan por tres etapas: Conversión a nube de puntos, filtrado por umbral, eliminación de puntos espureos y, opcionalmente, detección de formas. Estos datos son utilizados para construir un mapa de superficie multinivel. La otra herramienta desarrollada es un algoritmo de Punto más Cercano Iterativo (ICP) modificado, que tiene en cuenta el modo de funcionamiento del sonar de imagen utilizado.

La linea guida api - risk based inspection: Definizione delle frequenze di rilascio e ottimazione delle visite ispettive

La stima della frequenza di accadimento di eventi incidentali di tipo random da linee e apparecchiature è in generale effettuata sulla base delle informazioni presenti in banche dati specializzate. I dati presenti in tali banche contengono informazioni relative ad eventi incidentali avvenuti in varie tipologie di installazioni, che spaziano dagli impianti chimici a quelli petrolchimici. Alcune di queste banche dati risultano anche piuttosto datate, poiché fanno riferimento ad incidenti verificatisi ormai molto addietro negli anni. Ne segue che i valori relativi alle frequenze di perdita forniti dalle banche dati risultano molto conservativi. Per ovviare a tale limite e tenere in conto il progresso tecnico, la linea guida API Recommended Pratice 581, pubblicata nel 2000 e successivamente aggiornata nel 2008, ha introdotto un criterio per determinare frequenze di perdita specializzate alla realtà propria impiantistica, mediante l’ausilio di coefficienti correttivi che considerano il meccanismo di guasto del componente, il sistema di gestione della sicurezza e l’efficacia dell’attività ispettiva. Il presente lavoro di tesi ha lo scopo di mettere in evidenza l’evoluzione dell’approccio di valutazione delle frequenze di perdita da tubazione. Esso è articolato come descritto nel seguito. Il Capitolo 1 ha carattere introduttivo. Nel Capitolo 2 è affrontato lo studio delle frequenze di perdita reperibili nelle banche dati generaliste. Nel Capitolo 3 sono illustrati due approcci, uno qualitativo ed uno quantitativo, che permettono di determinare le linee che presentano priorità più alta per essere sottoposte all’attività ispettiva. Il Capitolo 4 è dedicato alla descrizione della guida API Recomended Practice 581. L’applicazione ad un caso di studio dei criteri di selezione delle linee illustrati nel Capitolo 3 e la definizione delle caratteristiche dell’attività ispettiva secondo la linea guida API Recomended Practice 581 sono illustrati nel Capitolo 5. Infine nel Capitolo 6 sono rese esplicite le considerazioni conclusive dello studio effettuato.

In situ and in vitro comparison of laser fluorescence with visual inspection in detecting occlusal caries lesions

The aim of this study was to compare the in situ and in vitro performances of a laser fluorescence (LF) device (DIAGNOdent 2095) with visual inspection for the detection of occlusal caries in permanent teeth. Sixty-four sites were selected, and visual inspection and LF assessments were carried out, in vitro, three times by two independent examiners, with a 1-week interval between evaluations. Afterwards, the occlusal surfaces were mounted on the palatal portion of removable acrylic orthodontic appliances and placed in six volunteers. Assessments were repeated and validated by histological analysis of the tooth sections under a stereomicroscope. For both examiners, the highest intra-examiner values were observed for the visual inspection when in vitro and in situ evaluations were compared. The inter-examiner reproducibility varied from 0.61 to 0.64, except for the in vitro assessment using LF, which presented a lower value (0.43). The methods showed high specificity at the D(1) threshold (considering enamel and dentin caries as disease). In vitro evaluations showed the highest values of sensitivity for both methods when compared to the in situ evaluations at D(1) and D(2) (considering only dentinal caries as the disease) thresholds. For both methods, the results of sensitivity (at D(1) and D(2)) and accuracy (at D(1)) showed significant differences between in vitro and in situ conditions. However, the sensitivity (at D(1) and D(2)), specificity and accuracy (both at D(1)) of the methods were not significantly different when the same condition was considered. It can be concluded that visual inspection and LF showed better performance in vitro than in situ.

BALTHMETRIC SURVEY IN THE KEWEENAW WATER WAY IN MICHIGAN, USA, MAKING 3D MODEL, AND COMPARING SONAR EQUIPMENT OF THE MODERN AUV AND THE TRADITIONAL SINGLE BEAM SONAR

This thesis represents the overview of hydrographic surveying and different types of modern and traditional surveying equipment, and data acquisition using the traditional single beam sonar system and a modern fully autonomous underwater vehicle, IVER3. During the thesis, the data sets were collected using the vehicles of the Great Lake Research Center at Michigan Technological University. This thesis also presents how to process and edit the bathymetric data on SonarWiz5. Moreover, the three dimensional models were created after importing the data sets in the same coordinate system. In these interpolated surfaces, the details and excavations can be easily seen on the surface models. In this study, the profiles are plotted on the surface models to compare the sensors and details on the seabed. It is shown that single beam sonar might miss some details, such as pipeline and quick elevation changes on the seabed when we compare to the side scan sonar of IVER3 because the single side scan sonar can acquire better resolution. However, sometimes using single beam sonar can save your project time and money because the single beam sonar is cheaper than side scan sonars and the processing might be easier than the side scan data.