Ni catalysts with Mo promoter for methane steam reforming

NiO/Al(2)O(3) catalyst precursors were prepared by simultaneous precipitation, in a Ni:Al molar ratio of 3:1, promoted with Mo oxide (0.05, 0.5, 1.0 and 2.0 wt%). The solids were characterized by adsorption of N(2), XRD, TPR, Raman spectroscopy and XPS, then activated by H(2) reduction and tested for the catalytic activity in methane steam reforming. The characterization results showed the presence of NiO and Ni(2)AlO(4) in the bulk and Ni(2)AlO(4) and/or Ni(2)O(3) and MoO(4)(-2) at the surface of the samples. In the catalytic tests, high stability was observed with a reaction feed of 4:1 steam/methane. However, at a steam/methane ratio of 2: 1, only the catalyst with 0.05% Mo remained stable throughout the 500 min of the test. The addition of Mo to Ni catalysts may have a synergistic effect, probably as a result of electron transfer from the molybdenum to the nickel, increasing the electron density of the catalytic site and hence the catalytic activity. (C) 2009 Elsevier Ltd. All rights reserved.

Carbon dioxide reforming of ethanol over Ni/Y(2)O(3)-ZrO(2) catalysts

Supported nickel catalysts of composition Ni/Y(2)O(3)-ZrO(2) were synthesized in one step by the polymerization method and compared with a nickel catalyst prepared by wet impregnation. Stronger interactions were observed in the formed catalysts between NiO species and the oxygen vacancies of the Y(2)O(3)-ZrO(2) in the catalysts made by polymerization, and these were attributed to less agglomeration of the NiO during the synthesis of the catalysts in one step. The dry reforming of ethanol was catalyzed with a maximum CO(2) conversion of 61% on the 5NiYZ catalyst at 800 degrees C, representing a better response than for the catalyst of the same composition prepared by wet impregnation. (C) 2009 Published by Elsevier B.V.

Catalisadores de vanádio (V) contendo ligante tris(pirazolil)borato : rotas de imobilização e avaliação em polimerização de etileno

As sínteses, caracterizações e estudos referentes a polimerização do etileno de uma série de complexos {TpMs*}V(NtBu)Cl2 (1), {TpMs*}V(O)Cl2 (2), {TpMePh]V(NtBu)Cl2 (3) e {Tp*}V(O)Cl2 (4) são descritas. A reação destes complexos com MAO geram espécies catalíticas ativas para a polimerização do etileno. Para as reações de polimerização realizadas em tolueno a 30°C, as atividades variaram entre 71 e 1.126 kg de PE/mol[V]·h·atm. A atividade mais alta foi obtida usando o precursor catalítico 1. As curvas de DSC mostraram a formação de polietileno de alta densidade com temperaturas de fusão entre 134 e 141ºC. Visando a obtenção de catalisadores suportados, o complexo 1 foi imobilizado através do método direto sobre os seguintes suportes inorgânicos: SiO2, SiO2 modificada com MAO, SiO2-Al2O3, MCM-41, MgO e MgCl2. O teor de metal imobilizado, determinado por XRF, permaneceu entre 0,22 e 0,50 % g V/g suporte (p/p %).Os maiores teores de metal foram encontrados para os suportes com maiores áreas superficiais (SiO2–Al2O3 e MCM-41). Todos os sistemas mostraram-se ativos na polimerização do etileno na presença de MAO ou TiBA/MAO (1:1) (Al/V = 1000). A atividade catalítica mostrou-se dependente da natureza do suporte, ficando esta entre 8 e 89 kg de PE/mol[V]·h·atm. Os melhores resultados foram obtidos para sílica. Suportes ácidos ou básicos forneceram sistemas catalíticos menos ativos. Os polietilenos apresentaram pesos moleculares médios (Mw) superiores a 2.000.000 g/mol, sugerindo a produção de polímeros com ultra-alto peso molecular. Baseado nos resultados referentes a imobilização de 1, o complexo 2 foi imobilizado sobre SiO2 e SiO2 modificada com MAO. As reações de polimerização deste catalisador suportado foram realizadas em tolueno a 30ºC, utilizando MAO ou TiBA/MAO (1:1) (Al/V = 1000). Os resultados de atividade variaram entre 7 e 236 kg de PE/mol[V]·h·atm, sendo a maior atividade encontrada para o sistema suportado 2/SiO2/MAO(4,0 % Al/SiO2) na presença da mistura de cocatalisadores TiBA/MAO (1:1). Os complexos 1 e 2 foram imobilizados “in situ” utilizando SiO2 e SiO2/MAO (4,0 % em peso de Al/SiO2) como suportes, empregando 0,02 % em peso de V/g suporte. Todos os sistemas estudados foram ativos nas reações de polimerização do etileno. Para o complexo 1, a maior atividade (1.903 kg de PE/mol[V]·h·atm) foi obtida utilizando o sistema 1/SiO2/MAO (4,0 % em peso de Al/SiO2) na presença do MAO. Cabe ressaltar que, para este sistema catalítico, o uso de TMA ao invés de MAO proporciona a formação de um sistema catalítico altamente ativo (1.342 kg de PE/mol[V]·h·atm). A maior atividade (1.882 kg de PE/mol[V]·h·atm) para o complexo 2 foi encontrada quando o mesmo foi suportado “in situ” sobre SiO2, utilizando MAO como cocatalisador. O catalisador de vanádio preparado “in situ” sobre o suporte na presença do MAO apresentou uma atividade catalítica de 22 kg de PE/mol[V]·h·atm) sendo a mesma inferior àquela obtida utilizando o sistema via imobilização do catalisador “in situ”. Várias rotas sintéticas (hidrolíticas e não-hidrolíticas) objetivando a preparação “in situ” do catalisador sobre sílicas-híbridas foram empregadas, entretanto todas as tentativas falharam devido à alta reatividade do grupo NCO com alguns reagentes empregados no processo de preparação das mesmas. Uma série de catalisadores híbridos foram preparados pela combinação e imobilização seqüencial de {TpMs*}V(NtBu)Cl2 (1) e [LFeCl2] (8) (L = 2,6-bis(imino)piridila) sobre SiO2/MAO (4,0% em peso de Al/SiO2) em diferentes proporções (1:1) e (1:3). Todos os sistemas foram ativos na polimerização do etileno na presença de MAO como cocatalisador. A atividade mostrou-se dependente da natureza do complexo e da ordem de imobilização. A maior atividade foi obtida para o sistema V/Fe/SMAO-4 (1:1) (117 kg de PE/mol[M]·h·atm). Baseado nas curvas de DSC, diferentes tipos de PE podem ser obtidos dependendo da natureza do complexo imobilizado e da ordem da adição dos catalisadores no suporte. Para os sistemas híbridos, a presença do Fe determina a formação de PE com dois picos de fusão.

Ruminal methane emission by dairy cattle in Southeast Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Impedance of carrier injection at the metal-organic interface mediated by surface states in electron-only tris(8-hydroxyquinoline) aluminium (Alq(3)) thin layers

Capacitance spectra of thin (< 200 nm) Alq(3) electron-only devices have been measured as a function of bias voltage. Capacitance spectra exhibit a flat response at high frequencies (> 10(3) Hz) and no feature related to the carrier transit time is observed. Toward low frequencies the spectra reach a maximum and develop a negative excess capacitance. Capacitance response along with current-voltage (J-V) characteristics are interpreted in terms of the injection of electrons mediated by surface states at the metal organic interface. A detailed model for the impedance of the injection process is provided that highlights the role of the filling/releasing kinetics of energetically distributed interface states. This approach connects the whole capacitance spectra to the occupancy of interface states, with no additional information about bulk trap levels. Simulations based on the model allow to derive the density of interface states effectively intervening in the carrier injection (similar to 1.5 x 10(12) cm (2)). (C) 2008 Elsevier B.V. All rights reserved.

Motility and viability of ram sperm cryopreserved in a Tris-egg yolk extender supplemented with anti-oxidants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization and catalytic activity of iron(III) mono(4-N-methyl pyridyl)-tris(halophenyl) porphyrins in homogeneous and heterogeneous systems

The synthesis, characterization and catalytic activity of the cationic iron porphyrins Fe[M(4-N-MePy)TDCPP]Cl-2 and Fe[M(4-N-MePy)TFPP]Cl-2 in the epoxidation of (Z)-cyclooctene by PhIO in homogeneous solution and supported on silica gel (SG), imidazole propyl gel (IPG) or SG modified with 2-(4-sulfonatophenyl)ethyl groups (SiSO3) have been accomplished. When supported on IPG, both cationic FeP bind to the support via Fe-imidazole coordination. Fe[M(4-N-MePy)TDCPP]IPG contains a mixture of low-spin bis-coordinated (FeP)-P-III and high-spin mono-coordinated (FeP)-P-III species, whereas Fe[M(4-N-MePy)TFPP]IPG only contains high-spin mono-coordinated (FeP)-P-III. These FePIPG catalysts also contain (FeP)-P-II species, whose presence was confirmed by EPR spectroscopy using NO as a paramagnetic probe. Both cationic FePs coordinate to SG through Fe-O ligation and they are present as high-spin (FeP)-P-III species. The cationic FePs supported on SiSO3- are also high-spin (FeP)-P-III species and they bind to the support via electrostatic interaction between the 4-N-methylpyridyl groups and the SO3- groups present on the matrix. In homogeneous solution, both Fe[M(4-N-MePy)TDCPP]Cl-2 and Fe[M(4-N-MePy)TFPP]Cl-2 have similar catalytic activity to Fe(TDCPP)Cl and Fe(TFPP)Cl, leading to cis-epoxycyclooctane yields of 92%. When supported on inorganic matrices,both FePs lead to epoxide yields comparable to their homogeneous analogues and their anchoring enables catalyst recovery and re-use. Recycling of Fe[M(4-N-MePy)TDCPP]SiSO3- shows that this FeP maintains its activity in a second reaction. (C) 1999 Elsevier B.V. B.V. All rights reserved.

Synthesis and reactivity in salt metathesis reactions of trivalent [La(Tp(Me2))(2)X] (X = Cl, I) complexes: crystal structures of [La(Tp(Me2))(2)Cl] and [La(Tp(Me2))(2)(kappa(2)-pz(Me2))]

Reaction of LaX3(THF)(n) (X = Cl, 1) with two equiv. of K(Tp(Me2)) gave good yields of the bis-Tp complexes [La(Tp(Me2))(2)X] (X = Cl (1); I (3)). However, the formation of 1 and 3 is always accompanied by significant amounts of La(Tp(Me2))(2)(kappa(2)-pz(Me2)) ([pz(Me2)](-) = 3,5-dimethyl-pyrazolato) (2). The pyrazolato complex 2, which presumably arises from decomposition of the [Tp(Me2)](-) moiety during salt metathesis, was independently prepared in good yield from 1 and in situ generated [pz(Me2)](-). The solid-state structures of 1 and 2 were determined by single-crystal X-ray diffraction studies. Subsequent reactions of halogeno-Tp(Me2) complexes 1 and 3 with various alkali metal salts MR (M = Li, R = CH2SiMe3, Ph, N(SiMe3)(2); M = K, R = OAr) gave M(Tp(Me2)) as the major product. Alternatively, the mono-Tp bis(aryloxide) derivatives [Ln(Tp(Me2))(OC6H2-2,6-'Bu-4-Me)(2)] (Ln = La (4); Nd (5)) were obtained in high yields by salt metathesis of [Ln(OC6H2-2,6-'Bu-4-Me)(3)] with one equiv. of K(Tp(Me2)). (C) 2004 Elsevier Ltd. All rights reserved.

Effect of tannin levels in sorghum silage and concentrate supplementation on apparent digestibility and methane emission in beef cattle

This study evaluated the effect of diets containing sorghum silages with higher (HT) and lower-tannin (LT) concentrations supplemented with concentrate or urea on intake, digestibility, ruminal digestibility, methane emission and rumen parameters in beef cattle. Four treatments were distributed according to a 2 x 2 factorial arrangement in a duplicate 4 x 4 Latin square: LT sorghum silage + urea, LT sorghum silage + concentrate, HT sorghum silage + urea, and HT sorghum silage + concentrate. Total digestibility of the organic matter was higher when concentrate was included in the diet (0.749 and 0.753 in the LT and HT treatments, respectively). It was observed lower ruminal apparent digested matter of neutral detergent fiber in HT diets. There was no effect of tannin levels on digestibility and methane emission. The supplementation with concentrate in the LT diet decreased gas losses as a function of gross energy intake in comparison to the supplementation of the diet with urea. These results suggest the potential of concentrate supplementation to minimize energy loss as methane emission by ruminants and increase the efficiency of energy utilization. (c) 2006 Elsevier B.V. All rights reserved.

Thallium-arene contacts in a rare yttrium tris(pyrazolyl)hydroborate ate complex

A salt elimination reaction between [YCl3(THF)(3.5)] and 1 or 2 equiv. of Tl(Tp(Ms*)) [Tp(Ms*) = HB(3-mesitylpyrazolyl)2(5-mesitylpyrazolyl)(-)] leads in both cases to single metathesis, giving a mixture of the mono-Tp(Ms*) complex [YCl3(Tp(Ms*))Tl] (1) and another complex, [YCl2(Tp(Ms* *))] (2) [Tp(Ms* *) = HB(3-mesitylpyrazolyl)(5-mesitylpyrazolyl)(2)(-)], that results from the transfer of a second mesityl group to the 5-position of the pyrazolyl ring. The solid-state structure of 1 shows a unique ate dimeric structure with the TV cations coordinated by two mu(2)- and two mu(3)-bridging Cl atoms as well as two eta(3)-mesityl ligands. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2004).

Methane and carbon dioxide seasonal cycles at urban Brazilian inland sites

Methane and carbon dioxide seasonal cycles during years 1998 and 1999 at two Brazilian urban and inland sites are presented. The mixing ratio averages over the studied period of time were 1.80 ppm CH4 and 384.7 ppm CO2. A comparison is made between continental averages and the averages of the three nearest global network background sites of NOAA-CMDL comprising Ascension Island, Namibia and Easter Island. Inland sites had 0.08 ppm or 4.9% more CH4 and 19.0 ppm or 4.9% more CO2 than background over the same time span. The CH4 summer minimum observed in remote sites was also detected inland. During the month of October 98 and 99 inland mixing ratios were frequently similar to background.

Polymerization of ethylene by the tris(pyrazolyl)borate titanium(IV) compound immobilized on MAO-modified silicas

The immobilization of soluble catalyst {Tp(Ms)}TiCl3 (Tp(Ms*)HB(3-mesityl-pyrazolyl)(2)(5-mesityl-pyrazolyl)(-)) on silica and MAO-modified silicas containing 4.0, 8.0 and 23.0 wt.% Al/SiO2 yields active supported catalysts for ethylene polymerization. Among the supported catalysts studied by XRF spectroscopy, higher titanium content was obtained using MAO-modified silica containing 8.0 wt.% Al/SiO2 as support. For the ethylene polymerization reactions carried out in hexane at 60degreesC using a combination of triisobutylaluminum (TiBA) and methylaluminoxane (MAO) (1:1), the activities varied between 24.4 and 113.5 kg of PE/mol [Ti] h. The highest activity is reached using MAO-modified silica containing 4.0 wt.% Al/SiO2 as support. The viscosity-average molecular weights ((M) over bar (v)) of the PE's produced with the supported catalysts varying from 1.44 to 9.94 x 10(5) g/mol with melting temperatures in the range of 125-140degreesC. The use of other Lewis acid cocatalysts, including TiBA, diethylaluminium chloride (DEAC), and trimethylaluminum (TMA) resulted also in the formation of active catalysts for ethylene polymerization. However, the activities are lower than that one using a combination of TiBA and MAO. The viscosity-average molecular weights (R,) of PE's are influenced by varying the cocatalysts as well as the Al/Ti molar ratio. The supported catalyst generated in situ under ethylene atmosphere is roughly four times more active than supported one containing 4.0 wt.% Al/SiO2. (C) 2003 Elsevier B.V. All rights reserved.

Highly selective nickel ethylene oligomerization catalysts based on sterically hindered tris(pyrazolyl)borate ligands

The reaction of TlTp' (Tp' = HB(3-mesitylpyrazolyl)(3)(-) (Tp(Ms)), HB(3-mesitylpyrazolyl)(2)(5-mesitylpyrazolyl)(-) (Tp(Ms)*)) with NiCl(2).6H(2)O affords Tp(Ms)NiCl (1) and Tp(Ms)*NiCl (2) in good yield. The compound 2 undergoes an isomerization process to form [{Tp(Ms)**}NiCl](2) (3) (Tp(Ms)** = HB(5-mesitylpyrazolyl)(2)(3-mesitylpyrazolyl)(-)) in 68% yield. Treatment of the tris(pyrazolyl)-borate nickel compounds 1 and 2 with alkylaluminum cocatalysts such as methylalumoxane (MAO) and trimethylaluminum (TMA) in toluene generates active catalysts for ethylene oligomerization. The compound 1 shows turnover frequencies in the range of (2.2-43.1) x 10(3) h(-1). Oligomerization reaction conditions can be adjusted that lead to selectivities as high as 81% for butene-1.

Improved activity and stability of Ce-promoted Ni/γ-A1 2O3 catalysts for carbon dioxide reforming of methane

The CO2 reforming of CH4 was carried out over Ni catalysts supported on γ-Al2O3 and CeO 2-promoted γ-Al2O3. The catalysts were characterized by means of surface area measurements, TPR, CO2 and H2 chemisorption, XRD, SEM, and TEM. The CeO2 addition promoted an increase of catalytic activity and stability. The improvement in the resistance to carbon deposition is attributed to the highest CO2 adsorption presented by the CeO2 addition. The catalytic behavior presented by the samples, with a different CH4/CO2 ratio used, points to the CH4 decomposition reaction as the main source of carbon deposition.

Functional nanostructured catalysts based on the niobates to the dry methane reforming and ethylene homologation reactions

Catalytic activity and selectivity of niobate-based nanostructured materials were investigated. Dry methane reforming (DMR) and ethylene homologation reaction (EHR) were selected as test reactions. KSr 2Nb5O15, Sr2NaNb5O 15 and NaSr2(NiNb4)O15 δ niobate powders were prepared by the high energy ball milling method and calcined in a reductor atmosphere. N2 adsorption isotherms, X-ray diffraction and infrared spectroscopy characterization was performed. Hydrogen pretreated niobates showed from low to moderate catalytic initial activity in DMR's test, nevertheless the materials were deactivated rapidly and the kinetic parameters associated to deactivation were estimated. Otherwise, non-treated catalysts showed a high initial activity in EHR's test and KSr2Nb 5O15 catalyst requires 24 h to the total deactivation with a high selectivity to form propylene. A reaction mechanism to the propylene formation is discussed. © 2012 Elsevier Ltd. All rights reserved.