Orientação espacial em adultos com deficiência visual: efeitos de um treinamento de navegação

O objetivo deste estudo foi demonstrar se um programa de navegação pode ajudar indivíduos com deficiência visual a melhorar a acurácia na orientação dinâmica. Nove participantes com deficiência visual retornaram a um ponto de partida após percorrer rotas em linha reta e triangular. Pré e pós-avaliações foram feitas entre um período de 4 meses, durante o qual o treinamento com navegação foi realizado. Entre pré e pós-teste, erros relativos de desvios angulares (ERDA) foram diferentes apenas na tarefa em linha reta. O valor de ERDA foi maior na tarefa em linha reta possivelmente por causa da magnitude do giro inicial antes de retornar ao ponto de partida (i.e., 180º) em contraste com a tarefa triângulo (i.e., 45º). Conclui-se que, em tarefas de orientação, os erros no desvio angular dependem da amplitude do giro inicial ao retornar para o ponto de partida. Ainda, a acurácia na manutenção da direção é influenciada por um treinamento específico com navegação.

Avaliação cefalométrica da posição do osso hióide em crianças respiradoras bucais

MATERIAL E MÉTODOS: em função das relações anatomofuncionais do osso hióide com o complexo craniofacial, realizou-se avaliação cefalométrica da posição do osso hióide em relação ao padrão respiratório. A amostra consistiu de 53 crianças, gênero feminino, com idades médias de 10 anos, sendo 28 respiradoras nasais e 25, bucais. As medidas cefalométricas horizontais, verticais e angulares foram utilizadas com a finalidade de determinar a posição do osso hióide. Estabeleceu-se uma comparação entre os grupos por meio do teste t de student, bem como correlação de Pearson entre as variáveis. RESULTADOS: Observou-se que não ocorreram diferenças estatísticas significativas para a posição mandibular e posição do osso hióide e o tipo do padrão respiratório. No Triângulo Hióideo, o coeficiente de correlação de 0,40 foi significativo entre AA-ENP (distância entre vértebra atlas e espinha nasal posterior) e C3-H (distância entre a terceira vértebra cervical e osso hióide) demonstrando uma relação positiva entre os limites ósseos do espaço aéreo superior e inferior. Para as medidas cranianas sugeriu-se uma relação entre a posição do osso hióide com a morfologia mandibular. CONCLUSÃO: Os resultados permitiram concluir que o osso hióide mantém uma posição estável, provavelmente, para garantir as proporções corretas das vias aéreas e não depende do padrão respiratório predominante.

Phytoseiid mites (Acari: Phytoseiidae) found in soil and litter from Atibaia, State of São Paulo, Brazil, with description of two new species

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inquérito soroepidemiológico sobre a infecção chagásica em doadores de sangue na região do Alto Paranaíba, Minas Gerais

This study aimed to evaluate the seroprevalence of Trypanosoma cruzi infection in blood donors of the core of Patos de Minas Regional Foundation's Hemominas, MG. To this end, tests were used (ELISA) and Reverse Passive Hemagglutination (HPR). Through retrospective study from 1996 to 2006, was considered the result of serological 21,787 donors where 259 (1.2%) were seropositive for T. cruzi infection and the highest number of seropositivity was found in the group of 41-50 years. The total number of donors tested, 15 143 (69.5%) were male and 6644 (30.5%) females giving a seroprevalence rate of 170 (0.8%) and 89 (0.4%) respectively. This seroepidemiological survey showed that still prevail rates of transmission of Chagas disease, which reinforces the idea of the need for serological tests for the prevention of Chagas disease, especially in endemic areas as the region of Triangulo Mineiro and Alto Paranaiba.

Efeitos do potencial alelopático de três leguminosas forrageiras sobre três invasoras de pastagens

Bioassays were carried out to identify and characterize the allelopathic potential effects of forage legumes leucena (Leucaena leucocephala), mineirão (Stylosanthes guianensis cv. Mineirão) and calopogônio (Calopogonium mucunoides) on germination and radicle elongation of the pasture weeds desmódio (Desmodium adscendens), guanxuma (Sida rhombifolia) and assa-peixe (Vernonia polyanthes). Aqueous seeds and shoot extracts were prepared in a concentration of 10% (w/v). The pH and osmotic potential were measured in each extract. The effects of the osmotic potential on the results were calculated considering the regression equations adjusted to the variations of osmotic potential in each parameter and the osmotic potential of the extracts. The results showed that the pH did not constitute in a source of variation of the results. The donor species indicated allelopathic potential that varied in function of donor and receiver species and part of the donor plant. The aqueous shoot extract of mineirão and calopogônio showed inhibition potential higher than the extract from seeds, while for leucena the effects more evident were obtained with the extract from seeds. Comparatively, the radicle elongation was a more sensitive indicator than germination to the effects of the extracts.The receiver species assa-peixe was the less sensitive to the effects of the extract.

Disponibilidade, composição bromatológica e consumo de matéria seca em pastagem consorciada de Brachiaria decumbens com Stylosanthes guianensis

The objective of this work was to evaluate the herbage availability, nutritive value, dry matter intake and grass and legume percentage in diet of crossbred Holstein-Zebu cows, in pasture with Brachiaria decumbens cv. Basilisk, Stylosanthes guianensis var. vulgaris cv. Mineirão and tree legumes. To estimate the fecal output, it was used 10 g cow -1 day -1 of chromium oxide during ten consecutive days. Extrusa samples were used to determine the chemical composition and in vitro dry matter digestibility. B. decumbens availability varied with climatic conditions, while S. guianensis availability decreased linearly along the experimental period. Dry matter intake was higher in May/2001 (1.9% body weight) and did not differ among other months (1.5% body weight). Low dry matter intake values were related to low in vitro dry matter digestibility coefficients (42.1 % to 48.0%) and high neutral detergent fiber content (70.2% to 79.4%). Dry matter intake was directly related to legume percentage in the pasture. This observation could indicate the potential of mixed pasture for improving nutritive value in dairy cattle diet.

Evaluation of the performance of α-SiAlON tool when turning Ti-6Al-4V alloy without coolant

Due to their high hardness and wear resistance, Si3N4 based ceramics are one of the most suitable cutting tool materials for machining cast iron, nickel alloys and hardened steels. However, their high degree of brittleness usually leads to inconsistent results and sudden catastrophic failures. This necessitates a process optimization when machining superalloys with Si3N4 based ceramic cutting tools. The tools are expected to withstand the heat and pressure developed when machining at higher cutting conditions because of their high hardness and melting point. This paper evaluates the performance of α-SiAlON tool in turning Ti-6Al-4V alloy at high cutting conditions, up to 250 m min-1, without coolant. Tool wear, failure modes and temperature were monitored to access the performance of the cutting tool. Test results showed that the performance of α-SiAl0N tool, in terms of tool life, at the cutting conditions investigated is relatively poor due probably to rapid notching and excessive chipping of the cutting edge. These facts are associated with adhesion and diffusion wear rate that tends to weaken the bond strength of the cutting tool.

Properties advanced of the silicon nitride based ceramics and recent performance on automotive parts manufacture by machining process: Advanced Ceramics, demand Forecast

Automotive parts manufacture by machining process using silicon nitride-based ceramic tool development in Brazil already is a reality. Si 3N4-based ceramic cutting tools offer a high productivity due to their excellent hot hardness, which allows high cutting speeds. Under such conditions the cutting tool must be resistant to a combination of mechanical, thermal and chemical attacks. Silicon nitride based ceramic materials constitute a mature technology with a very broad base of current and potential applications. The best opportunities for Si3N 4-based ceramics include ballistic armor, composite automotive brakes, diesel particulate filters, joint replacement products and others. The goal of this work was to show latter advance in silicon nitride manufacture and its recent evolution on machining process of gray cast iron, compacted graphite iron and Ti-6Al-4V. Materials characterization and machining tests were analyzed by X-Ray Diffraction, Scanning Electron Microscopy, Vickers hardness and toughness fracture and technical norm. In recent works the authors has been proved to advance in microstructural, mechanical and physic properties control. These facts prove that silicon nitride-based ceramic has enough resistance to withstand the impacts inherent to the machining of gray cast iron (CI), compacted graphite iron (CGI) and Ti-6Al-4V (6-4). Copyright © 2008 SAE International.

Centroamérica: evolución de la integración económica durante 1998

Incluye Bibliografía

Microstructure, crystalline phase, and dielectric property analyses of TiO2 composition with ZrO2 addition

For microwave applications, including mobile and satellite communications, ceramic resonators should have a high dielectric constant, low dielectric losses, and high frequency stability. In this sense, TiO2-ZrO 2 ceramics have been investigated as a function of sintering behavior, phase composition, and microstructure. The ceramics were densified reaching a value of about 86% of theoretical density at 1400°C sintering temperature. The ceramics are prepared by mixing raw materials with the following TiO2-ZrO2 weight % ratio: 100 to 0, 90 to 10, and 80 to 20, respectively. The measured dielectric constants are between 79 and 88 values, while the quality factor due to dielectric losses are between 2820 and 5170. These results point out the influence of Ti/Zr ratio on controlling the dielectric properties. © (2010) Trans Tech Publications.

Sintering temperature influence on microwave dielectric properties of TiO2-ZrO2 ceramics

Dielectric ceramics have been widely investigated and used for microwave applications such as resonators and filters. The present study deals with the influence of sintering temperature on microwave dielectric properties of TiO2 ceramics with 10, 20, and 30 wt% ZrO2. Three compositions have been developed through mixing procedures and then tested for each sintering temperature: 1500 and 1400°C. X-ray diffraction and scanning electron microscopy are carried out aiming to explain the ceramic behavior of each sample. The dielectric constants of different ceramics for both temperatures varied from 85.4 to 62.6, while their quality factor due to dielectric losses varied from 3110 to 1630. The Q decrease is attributed to the non uniform grain growth and to the obtained crystalline phases. The best microwave parameters were obtained for the ceramics sintered at 1400°C, which can be applied in microwave circuits as dielectric resonators. © (2010) Trans Tech Publications.

Effect of fungicides on the mite fauna of prunus persica L. cultivars in Presidente Prudente, SP, Brazil

The objective of this study was to characterize the diversity of phytophagous and predatory mites on peach cultivars either with or without fungicide treatment, in the city of Presidente Prudente, State of São Paulo, Brazil. In order to evaluate the effect of fungicides, leaf samples were colleted at random from treated and untreated plants of the Tropical, Aurora 1 and Aurora 2 cultivars, from June 2004 to February 2006. From the results obtained it can be concluded that: plants with or without treatment showed high populations of predatory mites, indicating that the treatments were innocuous on the mite populations. A diversified composition of the mite community was observed. The Phytoseiidae family had the highest richness in numbers and species of mites. Euseius citrifolius and E. concordis were the most abundant species. Plants with or without treatment had high abundances of predatory mites, with a predominance of E. citrifolius.

Diferenças regionais do cultivo de café no Brasil

Brazil is one of the major coffee producers in the world, because of this, the goal of this study was to assess the regional differences of coffee cultivation for the reference crops 2001/2002 and 2002/03 by means of a life cycle assessment (LCA) in order to generate detailed production inventory data as well as quantify the potential environmental impacts of this crop. All information considered in this study (use of water, fossil based energy, fertilizers, pesticides and correctives) was taken from data collected from the producing farms. Four Brazilian coffee producer regions located at the Southeastern region were evaluated: Sul de Minas Gerais and Cerrado Mineiro in Minas Gerais State, and Mogiana and Alta Paulista regions in São Paulo State. The data refer to a production of 25.2 million kg of green coffee. Depending on the considered region, the production of 1,000 kg of green coffee requires, on average, approx. 9,300 to 13,000 kg of total energy, 70 to 130 kg of diesel, 6,500 to 12,700 kg of process water, 270 to 340 kg of fertilizers (NPK), 2.0 to 13.0 kg of pesticides, 230 to 600 kg of correctives, and yield around 1,600 to 1,900 kg/ha. Despite 20% of the coffee growers showing a good environmental performance, i.e. consumption of pesticides, fertilizers and correctives lower than the regional averages, this study has also identified some farms that can probably reduce the amount of some inputs and enhance their environmental performance.

Visualização 3D de uma imagem digital

Pós-graduação em Ciências Cartográficas - FCT

La dinámica del desarrollo sustentable y sostenible

Incluye Bibliografía