Efeito de tratamentos térmicos nas propriedades mecânicas, eletroquímicas e citotoxidade de ligas do sistema Ti-15Mo-XNb

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistemas suplementares e alternativos de comunicação nas habilidades expressivas de um aluno com paralisia cerebral

The objective of this research was to describe the use of an augmentative and alternative system for a student with cerebral palsy during intervention. A 10-year-old male student with cerebral palsy participated in this investigation. He attended special classes for people with disability in a public school in a city of the interior of Sao Paulo. The scheduled activities were carried out twice a week for two years at the Laboratory of Special Education of a public University of São Paulo. All of the tapes describing the activities that were filmed during the assessment and implementation of augmentative and alternative communication resource were watched and described using a specific protocol. Based on the information from the protocols, the sessions with intervals greater than 20 days and the ones with activities involving the communication board with the time equal or greater than 20 minutes during the first year of intervention were selected. The chosen sessions were transcribed in full and, after analyzing the text, the following categories were established, according to the stated goal: the graphic system helped the student with utterances of vertical structure (56%) associated with the oral (14%) and non-oral and non-verbal form (30%), while the use of the graphic system along with other forms collaborated to enhance statements, enabling better understanding of the child s intention. The use of augmentative and alternative communication systems provided the expansion of effective dialogical situations for the student during the activities carried out in speech therapy.

Desenvolvimento de tratamentos térmicos visando ganhos magnéticos em aços com ultra baixa concentração de carbono

The relationship between the microstructure and the magnetic properties of soft magnetic materials, have been studied by different researchers who seek to employ electrical systems, increasing their life span and reduce their energy consumption. Following this same line the Brazilian Synchrotron Light Laboratory developed a new synchrotron light source, the Sirius, where magnetic materials with high magnetic permeability values are being studied for use in accelerator dipoles. The low carbon steel is a ferromagnetic material that has a great relationship between cost and magnetic permeability. Aiming to raise the values of permeability of the material, heat treatments were done and evaluated the magnetic properties, microstructure and mechanical properties to correlate them. It was noted that the thermal annealing were the most effective, and the annealing performed with a small time threshold, which only phenomenon observed was the primary recrystallisation, was the most elevated values of magnetic permeability of the material, due to the average grain size ideal achieved. The heat treatments do not guide the magnetic domains of the material and not influence the mechanical properties of the material due to lack of carbon in the microstructure. The annealing treatments were shown to be an alternative to raising the values of the magnetic permeability of the material and facilitate the implementation of ultra low carbon steel in the dipoles of Sirius

Tumor venéreo transmissível canino com enfoque nos diversos tratamentos

The canine Transmissible Venereal Tumor (TVT) is a neoplasm of round cells that primarily affects the external genitalia of both male and female dogs with high casuistry. Its transmission occurs by the tumor cells’ implementation in the mucous membranes during the coitus or in other body parts through licking, scratching or direct contact with the tumor. The clinical manifestations vary according to the location. Despite being a malignant neoplasm, TVT’s metastatic potential is low. The diagnosis is based on macroscopic characteristics, clinical signs, cytology and/or histopathology exam, among which cytology is considered the best method. There are several treatment protocols for the TVT, among which, surgical excision, radiotherapy, immunotherapy and chemotherapy. Chemotherapy with vincristine sulfate is the elected treatment. However, more and more new alternatives have been developed, as the usage of natural products, homeopathy and ivermectina. They can be used as a unique treatment to neoplasm or combined to the chemotherapy in order to decrease the dose and the application number of the chemotherapic and its side effects

Técnicas e perspectivas de tratamentos imunoterápicos em câncer

Não disponível

Metodologia de determinação das curvas de probabilidade de falha S-N-P para uma liga de aluminio submetida a diferentes tratamentos termicos de solubilização e precipitação

The approach of the subject matter in this work relies on the fact that the reliability of methods for performance analysis of materials proves critical for the result. This work focused on the development and presentation of the methodology for lifting probability curves for fatigue test (SN) according to standard E739, this focus is justified by the fact that the results in fatigue test show considerable dispersion making it difficult to reading and interpretation of data, this dispersion arises because the phenomenon of rupture is strongly influenced by internal characteristics of the material, we can then have much data ranging from test to test. Thus we set out originally for a brief study of aluminum alloys in question, as well as the treatments to which they were subjected. We also studied the behavior of materials when subjected to cyclic loading, which configures process of fatigue failure, and even fatigue test method in question. This statistical analysis is based on the ASTM E739 standard, so its contents was studied in detail so that we could present in detail the methodology and raise SN curves for different aluminum alloy 7012 subjected to fatigue test. Data were collected from tests conducted in the department of materials from two samples of aluminum alloy 7012 solubilized and precipitated by different time intervals and assayed temperature fatigue-type traction-compression, these data were then analyzed and used to survey curves using the base as E739. After lifting the curve analyzed the characteristics of the test samples and their correlation with the test results. We confirmed the effectiveness of the method of statistical analysis by ASME E739, which allowed the reading of data without this method would be very difficult to have a reading and comparison of the results for the two types... (Complete abstract click electronic access below)

A Leishmaniose Tegumentar Americana no município de Rio Claro - São Paulo (SP): introdução, diagnósticos e tratamentos

Este trabalho teve como objetivo a realização de um levantamento bibliográfico da situação em que a cidade de Rio Claro, interior de São Paulo, se encontra em relação à Leishmaniose Tegumentar Americana, uma vez que, o município foi apontado como foco da doença no ano de 2000 por mídias regionais. O trabalho visa identificar o período de maior número de casos bem como a situação atual da doença na cidade. Este levantamento bibliográfico, contou com auxilio de agentes de saúde da Secretaria Municipal de Saúde e Instituto Adolfo Lutz presente na cidade, além de departamentos da prefeitura municipal envolvidos com tema. Ficou evidente que o município enfrentou períodos de surtos da doença, porém, atualmente a LTA está controlada, apresentando poucos casos em relação há anos anteriores. O atendimento aos doentes é oferecido gratuitamente na rede municipal de saúde. A cidade procura através dos órgãos envolvidos com o tema, conscientizar a população quanto ao risco e método de prevenção

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Patogenias e tratamentos da insuficiência hepática em cães

The liver has many biological functions that contribute to the proper functioning of the organism. Liver failure is the loss of these functions, leading to the appearance of complications that worsen the general clinical condition of the patient. This review shows the main complications of liver failure, explaining their pathogenesis and the possible forms of treatment in an attempt to improve the quality of life of patients during treatment of the disease that causes liver failure

Novas abordagens sobre tratamentos da Leishmaniose tegumentar

De acordo com a Organização Mundial da Saúde, a leishmaniose é ainda uma das doenças mais negligenciadas do mundo, afetando principalmente países pobres e em desenvolvimento. As leishmanioses podem, de acordo com a forma de acometimento do homem, dividir-se em dois grandes grupos: visceral e tegumentar. As estatísticas mostram que cerca de 350 milhões de pessoas são consideradas com risco de contrair leishmaniose, e cerca de dois milhões de novos casos ocorrem anualmente. O número de casos de leishmaniose tegumentar no Brasil em 2011 foi de 15.731. É considerada uma doença negligenciada uma vez que os fármacos de escolha são preparações à base de antimoniais, sendo os mesmos desde sua descoberta em 1912. Além disso o tratamento é longo, doloroso e altamente tóxico, assim levando os pacientes muitas vezes a desistirem antes do término previsto. O presente trabalho tem como objetivo fazer uma revisão bibliográfica a partir do banco de dados do PubMed e Scielo sobre novas pesquisas na área de fármacos e novos tratamentos para leishmaniose cutânea entre os anos de 2007 e 2012.

Uso de composto de poda de árvore e lodo de esgoto como substratos na formação de mudas de sangra d'água (Croton urucurana Baill.) irrigadas com três lâminas de água

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Estudo da modificação superficial de fibras de carbono por meio de tratamentos a plasma para o aumento da adesão na interface de compósitos fibra de carbono/PPS

Pós-graduação em Engenharia Mecânica - FEG

Caracterização de uma cerâmica 3Y-TZP e avaliação do efeito de tratamentos de superfície na adesão da cerâmica ao glaze ou cimento resinoso

Pós-graduação em Odontologia Restauradora - ICT

Comparação do custo e benefício entre o bloqueio ovariano com protocolo curto modificado e protocolo com antagonista em tratamentos de fertilização assisitida

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Influência de três tratamentos de superfície para cerâmicas a base de zircônia na resistência adesiva e no comportamento à fadiga do material

Pós-graduação em Odontologia Restauradora - ICT