Slow fashion and sustainability in Spain: How can local manufacturing improve sustainability and how do consumers respond?

"Slow Fashion" attempts to offset the demand for fast fashion and mass production (Fletcher, 2007). Consumers' response to sustainability-based practices is a limited discourse and studies for slow fashion concept are scarce. This study thus aims to enlighten the subject of how slow fashion concept could improve local economies and how Spanish consumers respond to such initiatives. This paper is based on an exploratory qualitative research for which focus group interviews including three group discussions with Spanish consumers were held. The data was examined by constant comparison analysis to present consumer insights. Moreover, a case study was conducted with a Spanish apparel brand. Saint Brissant was chosen since it manufactures in Spain to (i) ensure its products? high quality and (ii) to empower Spanish economy. This paper provides empirical insights. Even though local manufacturing was perceived to have a higher quality, Spanish consumers? behavioural intentions of using local brands were not high.Self-interest, mainly price and design, was recorded as the most influential purchase criteria. Furthermore, Saint Brissant case demonstrated that local manufacturing could boost local economies by creating workforce. However, governmental subsidies should be rearranged and consumers? perceptions should be improved to support local manufacturers in Spain.

Ku band waveguide diplexer design for satellite communication. Implementation by additive manufacturing and experimental characterization

Gran cantidad de servicios de telecomunicación tales como la distribución de televisión o los sistemas de navegación están basados en comunicaciones por satélite. Del mismo modo que ocurre en otras aplicaciones espaciales, existe una serie de recursos clave severamente limitados, tales como la masa o el volumen. En este sentido, uno de los dispositivos pasivos más importantes es el diplexor del sistema de alimentación de la antena. Este dispositivo permite el uso de una única antena tanto para transmitir como para recibir, con la consiguiente optimización de recursos que eso supone. El objetivo principal de este trabajo es diseñar un diplexor que cumpla especificaciones reales de comunicaciones por satélite. El dispositivo consiste en dos estructuras filtrantes unidas por una bifurcación de tres puertas. Además, es imprescindible utilizar tecnología de guía de onda para su implementación debido a los altos niveles de potencia manejados. El diseño del diplexor se lleva a cabo dividiendo la estructura en diversas partes, con el objetivo de que todo el proceso sea factible y eficiente. En primer lugar, se han desarrollado filtros con diferentes respuestas – paso alto, paso bajo y paso banda – aunque únicamente dos de ellos formarán el diplexor. Al afrontar su diseño inicial, se lleva a cabo un proceso de síntesis teórica utilizando modelos circuitales. A continuación, los filtros se optimizan con técnicas de diseño asistido por ordenador (CAD) full-wave, en concreto mode matching. En este punto es esencial analizar las estructuras y su simetría para determinar qué modos electromagnéticos se están propagando realmente por los dispositivos, para así reducir el esfuerzo computacional asociado. Por último, se utiliza el Método de los Elementos Finitos (FEM) para verificar los resultados previamente obtenidos. Una vez que el diseño de los filtros está terminado, se calculan las dimensiones correspondientes a la bifurcación. Finalmente, el diplexor al completo se somete a un proceso de optimización para cumplir las especificaciones eléctricas requeridas. Además, este trabajo presenta un novedoso valor añadido: la implementación física y la caracterización experimental tanto del diplexor como de los filtros por separado. Esta posibilidad, impracticable hasta ahora debido a su elevado coste, se deriva del desarrollo de las técnicas de manufacturación aditiva. Los prototipos se imprimen en plástico (PLA) utilizando una impresora 3D de bajo coste y posteriormente se metalizan. El uso de esta tecnología conlleva dos limitaciones: la precisión de las dimensiones geométricas (±0.2 mm) y la conductividad de la pintura metálica que recubre las paredes internas de las guías de onda. En este trabajo se incluye una comparación entre los valores medidos y simulados, así como un análisis de los resultados experimentales. En resumen, este trabajo presenta un proceso real de ingeniería: el problema de diseñar un dispositivo que satisfaga especificaciones reales, las limitaciones causadas por el proceso de fabricación, la posterior caracterización experimental y la obtención de conclusiones.

Improving manufacturing performance by standardization of interprocess communication

A number of environmental forces such as increasing value chain network complexity, decreasing product life-cycle cost, and time-to-market requirements or increasing product complexity act upon manufacturing organizations, enhancing the acute need for organizational routines that foster efficient and effective communication between processes. Such organizational routines erode quickly in the absence of common standards for knowledge sharing, that is why successful manufacturing systems benefit from interprocess standardization. The purpose of this paper is to offer a standardization model of interprocess communication that increases manufacturing operational performance (MOP). First, we propose a novel holistic model that makes standardized interprocess communication possible in manufacturing organizations. Second, we propose a model for quantifying the implications of standardizing interprocess communication upon MOP. Finally, as a matter of application, we show the results of its successful implementation in one Japanese manufacturing organization.

De la isla de Menorca a las costas sur y este de Inglaterra: análisis del prototipo de torre Martello = From the island of Minorca to the south and east coasts of England: analysis of the prototype of the Martello tower

Esta tesis doctoral desarrolla una investigación original sobre las torres defensivas de Menorca y las torres Martello de las costas sur y este de Inglaterra. Con respecto a las torres menorquinas, se distinguen las de Alcaufar y Punta Prima, construidas por ingenieros militares españoles, en 1786; de las levantadas por el ejército británico durante su último periodo de dominación de la isla, entre 1798 y 1802. Estos ingenieros reales británicos construyen las torres Martello en las costas inglesas, entre 1805 y 1812; y otras, semejantes a ellas, en el resto de su Imperio, hasta mediados del siglo XIX. La falta de estudios que relacionen las torres defensivas de Menorca y las Martello inglesas dentro del marco disciplinario de la construcción, ha constituido la justificación de esta investigación. La hipótesis de trabajo plantea un objetivo principal: el estudio y análisis comparativo entre ellas, que se desarrolla en varios niveles de análisis: morfológico, físico-constructivo, de visibilidades; pero también territorial, histórico y poliorcético. Esta tesis cuestiona, en consecuencia, la idea tradicionalmente aceptada de que las torres Martello tomaran la torre de Mortella, en Córcega, o cualquiera de las denominadas torres "preMartello", como referencia para crear su prototipo. La metodología empleada combina los trabajos de gabinete con una intensa labor de campo, en la que se documentaron cincuenta y siete torres, catorce en Menorca y cuarenta y tres en Inglaterra. Se han redactado sus correspondientes fichas de datos, que incluyen aspectos generales - morfológicos y constructivos -, así como documentación fotográfica. Se han elaborado los levantamientos morfológicos de siete de estas torres, aquellas que por sus particularidades constructivas, o bien representan un determinado tipo de torre, o bien se distinguen del resto. Del mismo modo, se han desarrollado los levantamientos físico-constructivos y la caracterización de materiales de las cuatro torres más relevantes para este estudio: las menorquinas Alcaufar y Punta Prima, y las torres 24 y C, que ejemplifican, respectivamente, las levantadas en las costas sur y este de Inglaterra. El sistemático método de trabajo llevado a cabo ha favorecido la investigación y ha ayudado a obtener conclusiones que verifican la hipótesis planteada en la tesis y cumplen los objetivos establecidos al comienzo de la misma. ABSTRACT This doctoral thesis develops an original research on the defensive towers of Minorca, and the Martello towers on the south and east coasts of England. Regarding the Minorcan towers, Alcaufar and Punta Prima, built by the Spanish military engineers in 1786, must be distinguished from those erected by the British Army during its last period of domination of the island between 1798 and 1802. These Royal Engineers build the Martello towers on the English coasts between 1805 and 1812; and others, similar to them, in the rest of their Empire until the middle of the 19th century. The lack of studies linking these Minorcan and English towers, within the disciplinary framework of construction, has been the justification for this research. The hypothesis poses a main goal: the study and comparative analysis of them, which takes place at several levels of analysis: morphological, constructive, of visibilities; but also territorial, historical and poliorcetic. Consequently, this thesis questions the traditionally accepted notion that the Martello towers took the Corsican Mortella Tower, or any of the so-called “preMartello” towers as a reference to create their prototype. The methodology combines the cabinet works with significant fieldwork, in which fifty seven towers were documented, fourteen in Minorca and forty three in England. The corresponding data sheets were drafted including general aspects - morphological and constructive-, and photographic documentation. Morphological survey plans were developed for seven of these towers due to their construction peculiarities, which either denote a specific type of tower or makes it stand out from the rest. Likewise, constructive survey plans and material characterisation sheets of the four more relevant towers in this study were developed: the Minorcan Alcaufar and Punta Prima, and towers 24 and C, both respectively exemplifying those built on the south and east coasts of England. The systematic method of work encouraged the research and helped to draw conclusions that both confirm the hypothesis raised in the thesis and meet the objectives established at the beginning of it.

Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes

Self-passivating tungsten based alloys will provide a major safety advantage compared to pure tungsten when used as first wall armor of future fusion reactors, due to the formation of a protective oxide layer which prevents the formation of volatile and radioactive WO3 in case of a loss of coolant accident with simultaneous air ingress. Bulk WCr10Ti2 alloys were manufactured by two different powder metallurgical routes: (1) mechanical alloying (MA) followed by hot isostatic pressing (HIP) of metallic capsules, and (2) MA, compaction, pressureless sintering in H2 and subsequent HIPing without encapsulation. Both routes resulted in fully dense materials with homogeneous microstructure and grain sizes of 300 nm and 1 μm, respectively. The content of impurities remained unchanged after HIP, but it increased after sintering due to binder residue. It was not possible to produce large samples by route (2) due to difficulties in the uniaxial compaction stage. Flexural strength and fracture toughness measured on samples produced by route (1) revealed a ductile-to-brittle-transition temperature (DBTT) of about 950 °C. The strength increased from room temperature to 800 °C, decreasing significantly in the plastic region. An increase of fracture toughness is observed around the DBTT.

Manufacturing DNA microarrays of high spot homogeneity and reduced background signal

Analyses on DNA microarrays depend considerably on spot quality and a low background signal of the glass support. By using betaine as an additive to a spotting solution made of saline sodium citrate, both the binding efficiency of spotted PCR products and the homogeneity of the DNA spots is improved significantly on aminated surfaces such as glass slides coated with the widely used poly-l-lysine or aminosilane. In addition, non-specific background signal is markedly diminished. Concomitantly, during the arraying procedure, the betaine reduces evaporation from the microtitre dish wells, which hold the PCR products. Subsequent blocking of the chip surface with succinic anhydride was improved considerably in the presence of the non-polar, non-aqueous solvent 1,2-dichloroethane and the acylating catalyst N-methylimidazole. This procedure prevents the overall background signal that occurs with the frequently applied aqueous solvent 1-methyl-2-pyrrolidone in borate buffer because of DNA that re-dissolves from spots during the blocking process, only to bind again across the entire glass surface.

Understanding structural divergence in European manufacturing

The heterogeneity among European manufacturing systems has widened in the last fifteen years under the competitive pressure of new industrial powers within and outside the EU boundaries, and as a result of the 2008 global recession. This paper describes such transformation, in terms of the sectoral composition and the geographical concentration of industrial activities. It also analyzes how cross-country differences in the export performance, in the levels of domestic demand and in the exposure to low-cost import competition have contributed to the divergence in European manufacturing.

Implementing an Integrated Management System (IMS) at an Aerospace Manufacturing Facility

This project analyzes the challenges, issues, benefits, and lessons learned that several companies experienced while implementing integrated management systems. Based on previous experiences, this paper defines several strategies that an organization should use to increase the probability of implementing an integrated management system (IMS) successfully. Strategies include completing a feasibility analysis, creating a policy, allocating resources, developing objectives, modifying documentation, and creating a continuous monitoring process. Moreover, an organization can reduce potential obstacles by promoting a culture that encourages management commitment and employee participation. Results indicate the implementation of an IMS provides the framework to manage environmental, health, and safety programs effectively. By implementing an IMS, an organization can save time and money, as well as proactively control risk.

A Regulatory Compliance Plan for Decommissioning a Sodium Phosphate Manufacturing Plant

Sodium phosphates are a class of chemicals that have been widely employed in commercial and consumer applications. However, declining use of these chemicals due to environmental concerns has lead to restructuring within the industry that has caused, and is likely to continue to cause, reduction of sodium phosphate production capacity. Closure of a sodium phosphate manufacturing plant necessitates decommissioning and decontamination activities that are subject to a variety of federal, state, and local regulations. A compliance plan was developed to provide a blueprint for ensuring that all federal regulatory requirements are met, however, site dependent state and local requirements were excluded. The compliance plan provides a framework that addresses project team formation and project planning, regulatory requirements, identification of affected processing equipment, plant pre-shutdown activities, waste stream identification and waste management facilities, safety, training, and emergency preparedness planning, and project decommissioning remedial actions. This regulatory compliance plan will enable sodium phosphate plant operators to complete decontamination and decommissioning work in a timely, efficient, compliant, and cost effective manner.

A new paradigm: cloud agile manufacturing

Cloud Agile Manufacturing is a new paradigm proposed in this article. The main objective of Cloud Agile Manufacturing is to offer industrial production systems as a service. Thus users can access any functionality available in the cloud of manufacturing (process design, production, management, business integration, factories virtualization, etc.) without knowledge — or at least without having to be experts — in managing the required resources. The proposal takes advantage of many of the benefits that can offer technologies and models like: Business Process Management (BPM), Cloud Computing, Service Oriented Architectures (SOA) and Ontologies. To develop the proposal has been taken as a starting point the Semantic Industrial Machinery as a Service (SIMaaS) proposed in previous work. This proposal facilitates the effective integration of industrial machinery in a computing environment, offering it as a network service. The work also includes an analysis of the benefits and disadvantages of the proposal.

Cloud agile manufacturing

This paper proposes a new manufacturing paradigm, we call Cloud Agile Manufacturing, and whose principal objective is to offer industrial production systems as a service. Thus users can access any functionality available in the cloud of manufacturing (process design, production, management, business integration, factories virtualization, etc.) without knowledge — or at least without having to be experts — in managing the required resources. The proposal takes advantage of many of the benefits that can offer technologies and models like: Business Process Management (BPM), Cloud Computing, Service Oriented Architectures (SOA) and Ontologies. To develop the proposal has been taken as a starting point the Semantic Industrial Machinery as a Service (SIMaaS) proposed in previous work. This proposal facilitates the effective integration of industrial machinery in a computing environment, offering it as a network service. The work also includes an analysis of the benefits and disadvantages of the proposal.