Preparation of mussel meat by drying

The paper describes a simple and cheap process for the preservation of mussel meat by drying. The method involves blanching the mussel meat shucked from purified live mussels in 5% boiling brine for 5 min followed by drying to moisture of 10 to 15%. The product stored in glass bottles or polythene bags suitably sealed, has a storage life of about six months after which the organoleptic qualities begin to deteriorate. No preservative is used at any stage of processing and the yield of the product is approximately 20%. The major type of spoilage during storage is brown discoloration. Spoilage due to insect infestation is also common unless packed properly.

Tin coating requirements in fish cans

Prawn, crab and clam meat were processed in experimental ca s having reduced internal tin coating of 5.6 GSM. Conventional cans having 11.2 GSM tin coating were used as control. Results showed that experimental cans behaved normally when used for canning prawns, provided the lacquer film was perfect with no exposure of metal. When there was a discontinuity in lacquer film exposing the metal blackening took place in such areas. Areas subjected to severe strains like the lock seam side and expansion rings on can ends were found to be more prone to blackening. Experimental cans were found unsuitable for canning crab meat or clam meat because in both cases the can wall as well as the contents underwent discoloration, in all cases.

Survey of plankton blooms and red tides and their interaction with environmental factors through monitoring satellite images

One of the most important marine ecological phenomena is red tide which is created by increasing of phytoplankton population, influenced by different factors such as climate condition changes, utrification hydrological factors and can leave sever and undesired ecological and economical effects behind itself in the case of durability. Coast line of Hormozgan is about 900km from east to west, within the range of geographical coordinates of 56 16 23.8, 26 58 8.8 to 54 34 5.33 and 26 34 32 eastern longitude and northern latitude, seven sampling stations were considered and sampled for a period of one year from October 2008 to October 2009. after the analysis of Satellite images, monthly, during the best time. In several stages, samplings were performed. In each station, three samples were collected for identification and determination of Bloom- creating species abundance. Cochlodinium polykrikoides was the species responsible for the discoloration which occurred at October 2008 in Hormozgan marine water. Environmental parameters such as sea surface temperature, pH, salinity, Dissolved Oxygen concentration, Total Dissolved Solids (T.D.S.), conductivity, nitrate, nitrite and phosphate and also chlorophyll a were measured and calculated. Kruscal Wallis test was used to compare the densities between different months, seasons and the studied stations. Mann-whitney test from Nonparametric Tests was used for couple comparison. Pearson correlation coefficient was used to determine the relationship between physical and chemical data set and the abundance of Cochlodinium polykrikoides. Multivariate Regression and analysis of variance (ANOVA) also were used to obtain the models and equations of red tide occurrence relationship, environmental parameters and nutrient data. The highest density was 26 million cells per liter in Qeshm station. A meaningful difference was observed between sampling months and seasons but there was no between sampling stations which indicates that in favorable conditions, the occurrence of this phenomenon by the studied species is probable. Regarding to β coefficients of nitrate, temperature, phosphate, Total Dissolvable Solutions (T.D.S) and pH these parameters are effective on the abundance of this species and red tide occurrence. Increase in these factors can represent the effects and outcomes of human activities and increase in marine pollution.

The study of biological characteristics and determination of population dynamic parameters of sawtooth barracuda (Sphyraena putnamae) in the Persian Gulf (Hormozgun Province waters)

The biological characteristics and population dynamisms of Sphyraena putnamae, were studied in the northern Persian Gulf and Oman Sea restricted to Hormuzgan province waters within 13 months period, from November 2006 up to November 2007. Biometrical and anatomical measurements were carried out, and biological surveys were conducted on 486 specimens. On the other hand, the growth and mortality parameters were estimated by using 3096 samples. These samples were collected from 3 landings, namely Bandar Abbas, Bandar Lengeh and Bandar Jask. The measurements of the minimum and maximum Fork lengths and weights were 11.7 to 8.03 cm and 135.0 to 4140.0 g, respectively. The results indicated that this species, having the Relative Length of Gut, RLG=0.34±0.002, is strongly carnivorous (often fish-eater), proven by the fact that more than 98% of its stomach contents were fish pieces. Examining the changes in the index of stomach emptiness by the percentage of CV = 0.47% indicates that this fish is Moderate feeder. The level of feeding increased in March, before spawning and decreased in June and September, simultaneously with the spawning season. There are 2 peaks of reproduction or spawning seasons during the months of April-May and September, of which the prior is assumed as the main spawning. The sex ratio (M:F) was calculated 0.5:1.0(X2 =2.11), which did not show a significant difference with expected level of 1:1 (P>0.05). The average absolute and relative reproduction rates of Sphyraena putnamae is respectively as follows: 1866827.1±255448.9 and 1097.7±94.3. The highest and the lowest diameter of matured egg are from 200 to 750 μ, and its average diameter is 402.10 ± 0.190 μ. A parameter for Saw-tooth barracuda length measurement, Lm50, based on the Fork-length, was calculated as 54.01 cm. In other words, as far as the fisheries management is concerned, the fish whose lengths are less than 54.01 cm should not be caught. The calculated level of (R2) (correlations of total length & weight), indicated strong correlations between length and weight of this fish, and the obtained formula included W =0.007100 FL 2.9295 and reinforced this assumption. The “K” Index for this fish in 3 above mentioned landings (Jask, Bandar-Abbas and Bandar-Length) were 1.24, 0.37 and 0.46 per year, respectively and the FL index for the same landings were estimated as 129, 110 and 134 cm, respectively. The growth coefficient (MONRO) for the above mentioned regions were calculated as 3.601, 3.647 and 3.917, respectively; and in the surveyed regions there were no significant differences in populations. The Total mortality coefficient (Z) was calculated 0.76, 1.12 and 1.07 per year, the Natural mortality coefficient was 0.46, 0.63 and 0.70, and the Fishing mortality coefficient (rate) (F) was found to be 0.30, 0.49 and 0.37 per year. The value of the exploitation rate (E) is equal to 0.39 per year, indicating that this species is an under-exploited resource, and there is no excessive fishing pressure on the fish supply of this species in the afore-said regions. The highest level of exploitation was found for ‘Bandar Abbas’ fishing region and the lowest level of exploitation is in ‘Bandar Lengeh’ waters.

Machine vision based concrete surface quality assessment

Manually inspecting concrete surface defects (e.g., cracks and air pockets) is not always reliable. Also, it is labor-intensive. In order to overcome these limitations, automated inspection using image processing techniques was proposed. However, the current work can only detect defects in an image without the ability of evaluating them. This paper presents a novel approach for automatically assessing the impact of two common surface defects (i.e., air pockets and discoloration). These two defects are first located using the developed detection methods. Their attributes, such as the number of air pockets and the area of discoloration regions, are then retrieved to calculate defects’ visual impact ratios (VIRs). The appropriate threshold values for these VIRs are selected through a manual rating survey. This way, for a given concrete surface image, its quality in terms of air pockets and discoloration can be automatically measured by judging whether their VIRs are below the threshold values or not. The method presented in this paper was implemented in C++ and a database of concrete surface images was tested to validate its performance. Read More: http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29CO.1943-7862.0000126?journalCode=jcemd4

Defects Detection and Assessment in Concrete Surfaces

Aside from cracks, the impact of other surface defects, such as air pockets and discoloration, can be detrimental to the quality of concrete in terms of strength, appearance and durability. For this reason, local and national codes provide standards for quantifying the quality impact of these concrete surface defects and owners plan for regular visual inspections to monitor surface conditions. However, manual visual inspection of concrete surfaces is a qualitative (and subjective) process with often unreliable results due to its reliance on inspectors’ own criteria and experience. Also, it is labor intensive and time-consuming. This paper presents a novel, automated concrete surface defects detection and assessment approach that addresses these issues by automatically quantifying the extent of surface deterioration. According to this approach, images of the surface shot from a certain angle/distance can be used to automatically detect the number and size of surface air pockets, and the degree of surface discoloration. The proposed method uses histogram equalization and filtering to extract such defects and identify their properties (e.g. size, shape, location). These properties are used to quantify the degree of impact on the concrete surface quality and provide a numerical tool to help inspectors accurately evaluate concrete surfaces. The method has been implemented in C++ and results that validate its performance are presented.

High-order DES and zonal LES of a labyrinth seal

Hybrid numerical large eddy simulation (NLES) and detached eddy simulation (DES) methods are assessed on a labyrinth seal geometry. A high sixth order discretization scheme is used and is validated using a test case of a two dimensional vortex. The hybrid approach adopts a new blending function and along with DES is initially validated using a simple cavity flow. The NLES method is also validated outside of RANS zones. It is found that there is very little resolved turbulence in the cavity for the DES simulation. For the labyrinth seal calculations the DES approach is problematic giving virtually no resolved turbulence content. It is seen that over the tooth tips the extent of the LES region is small and is likely to be a strong contributor to excessive flow damping in these regions. On the other hand the zonal Hamilton-Jacobi approach did not suffer from this trait. In both cases the meshes used are considered to be hybrid RANS-LES adequate. Fortunately (or perhaps unfortunately) the DES profiles are in agreement with the time mean experimental measurements. It is concluded that for an inexperienced CFD practitioner this could have wider implications particularly if transient results such as unsteady loading are desired. Copyright © 2012 by the American Institute of Aeronautics and Astronautics, Inc.

Description of a new genus and two new species of labeonine fishes from South China (Teleostei : Cyprinidae)

A new genus and two new species are described from the Pearl River drainage in Guangxi Province, South China. Hongshuia, new genus, can be distinguished from all other Asian genera of the Labeonini by having a lower lip with its median lobe modified into a round, fleshy plate peripherally greatly protruded so as to form a ring-like fold that is posteromedially continuous with the mental region, and centrally sunken so as to form a round, flat, fleshy pad. This genus is distinct from all other Asian labeonine genera of the Garrina except for one newly described species of Parasinilabeo ( P. longibarbus), Pseudocrossocheilus, and Sinocrossocheilus, in the presence of well-developed maxillary barbels. Hongshuia differs from the above three genera in the lower lip morphology, and further from both Pseudocrossocheilus and Qianlabeo in the number of pharyngeal tooth rows and from Sinocrossocheilus in the colour pattern. Two new species, H. banmo and H. paoli, differ in the distribution density and degree of development of papillae on the rostral fold, depth of indentations on the distal edge of the rostral fold, presence or absence of papillae on the lower lip, size and shape of tubercles on the tip of the snout and anterior portion of the lachrymal, length, position and colour pattern of the dorsal fin, and snout length.

Redescription of Nais inflata Liang (Annelida : Oligochaeta) from China

Nais inflata Liang 1963 is redescribed on the basis of fully mature specimens collected from several localities of the Yangtze River and Yellow River. The observations and redescription resulting from the study of mature specimens supports N. inflata as a valid species. This species is characterized by a thickened body, the ventral crotchets all of the same type with distal tooth usually longer than proximal one, a greater number of dorsal chaetae per bundle, stout dorsal needles with equal minute bifid teeth (<1 mu m), presence of penial chaetae, and prostate glands on vasa deferentia instead of atria. The species is most closely related to N. communis Piguet, 1906 and N. variabilis Piguet, 1906. A table comparing allied species is provided.

Linichthys: A new genus of Chinese cyprinid fishes (Teleostei : Cypriniformes)

yLinichthys, new genus, is proposed for Barbodes laticeps Lin and Zhang, 1986. It can be separated from all other genera of Asian Barbinae in having a shallow depression extending along the median portion of the upper lip. Linichthys is superficially very similar to the type species of a monotypic Chinese cyprinid cavefish genus, Typhlobarbus nudiventris, in having an elongate and somewhat compressed body form, a truncate distal margin of the dorsal fin, and a soft and smooth last unbranched dorsal-fin ray, all of them being atypical for most of Asian barbins. The two genera differ in size of the eye and the number of rows of pharyngeal tooth. Although the same body form and/or structure of the dorsal fin are also shared with some species currently placed in other genera of Asian barbins, the recognition of Linichthys is warranted because of their marked differences in other characters. A redescription is also provided for the type species of the monotypic genus, Linichthys laticeps. It is known only from the upper and middle Zhu Jiang basin and the upper Chang Jiang basin in the city of Guiyang, Guizhou Province, South China.

Redescription of Difflugia tuberspinifera Hu, Shen, Gu et Gong, 1997 (Protozoa : Rhizopoda : Arcellinida : Difflugiidae) from China

The freshwater testate amoeba Difflugia tuberspinifera Hu et al. 1997 collected from pond and lake in China, is investigated by light and scanning electron microscopy. This little known taxon is redescribed and its morphology, biometry and ecology are supplied. After carefully comparison with other six similar species including Difflugia bartosi Stepanek, D. corona Wallich, D. corona cashi Deflandre, D. corona tuberculata Vucetich, D. muriformis Gauthier-Lievre et Thomas and Netzelia tuberculata (Wallich) Netzal we believe that the sub-spherical to spherical shell, the mulberry-shaped appearance, the 7-10 apertural tooth-like structures, the short collar and the conical spines numbering from 4 to 8 at the upper equatorial region in D. tuberspinifera set it apart from other species. Besides, statistical analysis indicates that D. tuberspinifera is a size-monomorphic species characterized by a main-size class and a small size range and the shell height is significant correlated with other morphometric characters at p < 0.05 excepting the number of aperture tooth-like structures and the number of spines. Moreover, D. tuberspinifera inhabits not only lotic but also lentic environment.

Microorganisms linked to Neoproterozoic microspar carbonate sedimentation in the Jilin-Liaoning area

Molar-tooth carbonate refers to a sort of rock that has ptygmatical folded structure comparable to the ivory. This kind of carbonate exists in a special time range (from Middle to Neoproterozoic). Its origin and the possibility to use it in stratigraphic correlation of the paleocontinent is the key task of the IGCP447, a project on Proterozoic molar tooth carbonates and the evolution of the earth (2001-2005). The importance lies in that the molar-tooth structure is the key to solving problems related to Precambrian biological and global geochemical events. The molar-tooth structure is associated with microorganisms. Development and recession of such carbonates have relations with the evolution process of early lives and abrupt changes in sea carbonate geochemistry. In recent years, based on researches on petrology, geochemistry and Sr isotope of molar-tooth carbonate in the Jilin-Liaoning and Xuzhou-Huaiyang area, the authors hold that it can be used as a marker for stratigraphic sequence and sedimentary facies analyses.

Coupling coefficients of gratings with graded refractive index waveguides

In this paper, the effective coupling coefficient k(eff) and the self-coupling coefficient zeta(1) are introduced to describe the characteristic of gratings in a resonant situation when the effects of radiation and other partial waves coupling are considered. The dependence of these two coupling coefficients on grating tooth shapes and depths and the dimensions of graded refractive index (GRIN) waveguides is numerically analysed. The results show that the gratings with linear GRIN waveguides have the largest \k(eff)\. The possibility of realizing a complex-coupled DFB laser, even a pure gain or loss coupled DFB laser, employing only a real refractive index coupled grating is also discussed.

Microorganisms linked to Neoproterozoic microspar carbonate sedimentation in the Jilin-Liaoning area

Molar-tooth carbonate refers to a sort of rock that has ptygmatical folded structure comparable to the ivory. This kind of carbonate exists in a special time range (from Middle to Neoproterozoic). Its origin and the possibility to use it in stratigraphic correlation of the paleocontinent is the key task of the IGCP447, a project on Proterozoic molar tooth carbonates and the evolution of the earth (2001-2005). The importance lies in that the molar-tooth structure is the key to solving problems related to Precambrian biological and global geochemical events. The molar-tooth structure is associated with microorganisms. Development and recession of such carbonates have relations with the evolution process of early lives and abrupt changes in sea carbonate geochemistry. In recent years, based on researches on petrology, geochemistry and Sr isotope of molar-tooth carbonate in the Jilin-Liaoning and Xuzhou-Huaiyang area, the authors hold that it can be used as a marker for stratigraphic sequence and sedimentary facies analyses.

角蟾科（Megophryidae; Anura）蝌蚪的形态多样性和生态适应

角蟾科（Megophryidae）是以角蟾属（Megophrys Kuhl and Van Hasselt, 1822）为模式属而建立的，隶于无尾目（Anura），变凹型亚目（Anomocoela）。角蟾科包括2 亚科11 属142 种，分布于东洋界，从巴基斯坦、中国西部向东直到菲律宾和苏达群岛；中国有9 属75 种分布于华中和华南地区。角蟾科被认为是原始的两栖动物之一，其分类学、系统学、生态学、动物地理学的研究均深受中外科学家的瞩目。近年来，通过形态学、古生物学、细胞学、生态学、支序系统学的研究，角蟾科的分类与系统学研究取得了较大进展。与成体形态和分子系统学研究结果相比较，蝌蚪的研究存在更多的问题和挑战，尚需深入研究：（1）角蟾科蝌蚪的形态多样性分析；（2）角蟾科的系统发育关系与蝌蚪的演化，以及口漏斗的起源；（3）角蟾科蝌蚪表型分化与栖息环境和觅食行为的适应演化。针对上述问题，本文对角蟾科9 属30 种蝌蚪的形态特征，包括外部宏观形态和口器外部结构特征、口器内部显微结构、唇齿和角质颌的亚显微结构作了深入细致、多层次的比较研究；通过12s rRNA 和cytochrome b 基因构建最大简约树，采用贝叶斯系统发育进行分析，蝌蚪型的演化采用祖先性状的重建方法分析；得到如下结论：1）初步将角蟾科蝌蚪分为4 种类型；并且建立了2 种新的角蟾科蝌蚪类型。A 型：拟髭蟾型蝌蚪，该型蝌蚪包括拟髭蟾属、髭蟾属、齿蟾属和齿突蟾属的物种；B 型：新类型，掌突蟾型蝌蚪，该型蝌蚪在本文中包括掌突蟾属、小臂蟾属的物种；C 型：新类型，短腿蟾型蝌蚪，一种特化类型，该型蝌蚪在本文中仅包括短腿蟾属的物种；D 型：角蟾型蝌蚪，该型蝌蚪在本文中包括无耳蟾属、小口拟角蟾属和异角蟾属的物种。2）对角蟾科的分类进行了修订：（1）支持角蟾科两个亚科的分类系统；（2）角蟾亚科包括拟角蟾属、异角蟾属、无耳蟾属和短腿蟾属；该亚科形态差异小，系统学关系比较复杂，暂不作族级分类的再划分；（3）拟髭蟾亚科分为2 个族：拟髭蟾族，该族物种具有类型A 的蝌蚪，包括4 个属：拟髭蟾属、髭蟾属、齿蟾属、齿突蟾属；掌突蟾族，该族物种具有类型B 的蝌蚪，包括2 个属：掌突蟾属和小臂蟾属。3）结合分子系统进化关系探讨了4 种蝌蚪类型的演化。（1）角蟾科蝌蚪的最近共同祖先来自于一类具有拟髭蟾型蝌蚪性状的蝌蚪；（2）掌突蟾型蝌蚪和角蟾亚科的蝌蚪是由具有拟髭蟾型蝌蚪性状的祖先蝌蚪分别演化而来；（3）短腿蟾型蝌蚪是角蟾型蝌蚪的一种特化类型；（4）外群蝌蚪具有与拟髭蟾型蝌蚪相似的性状，进一步印证了类拟髭蟾型蝌蚪是角蟾科蝌蚪的最近共同祖先的假说；（5）具有口漏斗的蝌蚪类型是由不具口漏斗的蝌蚪类型演化而来，在角蟾科中口漏斗是一种衍生性状。4）分析了角蟾科四种蝌蚪类型与栖息环境的适应演化。（1）角蟾科蝌蚪的口部和体形的变化反映了该科蝌蚪由缓流向类似静水生境的回水凼的渐变式适应，角蟾科蝌蚪的形态显示了多方面的适应变化；（2）随着蝌蚪类型由A 向D的演化，当水速较大时，拟髭蟾型的蝌蚪营流水攀吸型生活方式；当水速递减时，掌突蟾型蝌蚪营流水附着型生活方式；当水速进一步递减时，具有较小口漏斗的短腿蟾型蝌蚪和具有大漏斗的角蟾型蝌蚪营流水浮泳型生活。角蟾科蝌蚪对于水流递减的适应演化说明蝌蚪的生态学适应是具有进化意义的；（3）蝌蚪口器内部结构的分化揭示了蝌蚪和食性的适应关系，蝌蚪以口部的唇齿与角质颌刮取或吞吸水中的物质，然后，通过口乳突有选择地过滤进入口腔中食物。拟髭蟾亚科蝌蚪的唇齿多而窄，唇齿间距宽，颌鞘粗而稀，反映了其植食性为主的特点；它们的舌前乳突一般为指状，在口腔入口处所占面积小，其机械过滤的作用很多被唇齿和角质颌分担了；而角蟾亚科的蝌蚪，其角质颌弱，其舌前乳突一般为匙状，几乎填满了口腔入口处，因此舌前乳突起了主要的机械过滤作用。The family Megophryidae is the largest and most diverse families inArchaeobatrachia, and most of its species occur in India, Pakistan, and eastward intoChina, Southeast Asia, Borneo and the Philippines to the Sunda Islands. Currently thefamily includes 142 species have been grouped into two subfamilies, Megophryinaeand Leptobrachiinae. The mountains of central and southern China are rich in speciesof Megophryidae, 75 species belong to 9 genera and two subfamilies.The family was supposed to be ideal materials of studies in many fields of biology,such as taxonomy, evolution, systematics, ecology, and biogeography. Recently, therehave a great development in taxonomy and systematics of megophryids throughstudied by morphology, paleontology, cytology, ecology, and cladistics. However,larvae of megophryids were generally unknown, although the tadpoles might be veryimportant for above studies.In this paper, we examined the evolutionary scenario of the tadpoles’ morphologyin the context of a phylogenetic framework. Our objectives are (1) to evaluate thedivergence of larval body shape and oral discs in the family Megophryidae, (2) toexplore the evolutionary trends of the larvae in megophryidae, and test if thefunnel-shaped oral disc is apomorphic, and (3) to explore the relationship of the larvalstructure, diet and microhabitat.We examined larval morphology of 30 megophryid species, the larval body shape,oral discs, the buccopharyngeal cavity, and jaw sheaths and denticles of the Chinesemegophryid frogs were re-examined. We constructed a phylogeny of the species on thebasis of published mitochondrial cytochrome b and 16S rRNA gene segments usingpartitioned Bayesian analyses. Furthermore, hypothetical changes of larval morphologywere inferred using parsimony principle on the phylogeny. The results showed that:1) Four tadpole types in Megophryidae. The larval morphological charactersseries in Chinese megophryids fall into four general categories according to the bodyshape and oral discs: (A) Leptobrachiini type, species from genera Leptobrachium,Oreolalax, Scutiger and, Vibrissaphora share this type of tadpoles. (B) Leptolalax type,species of genus Leptolalax have this type of tadpoles. (C) Brachytarsophrys type,species of the genus Brachytarsophrys have this type of tadpoles. (D) Megophryinitype, species of the genera Atympanophrys, Ophryophryne, and Xenophrys share this type of tadpoles. Of which B and C are two novel types.2）Taxonomic implications. The present study leads us to reconsider the generalclassification of tribes attributed to members of Megophryidae. More specifically,concerning the phylogenetic relationships and the two novel tadpole types describedherein, we propose a provisional taxonomy for the family but suggest that further taxasampling of other megophryids be performed to confirm this taxonomic change. TheMegophryidae is composed of two subfamilies (Leptobrachiinae and Megophryinae).The Leptobrachiinae was recogonized the two tribes: (1) tribe Leptobrachiini sensuDubois, corresponding to the tadpole of type A, including four genera, i.e.,Leptobrachium, Oreolalax, Scutiger and, Vibrissaphora; (2) tribe Leptolalaxini,corresponding to the tadpole of novel type B, including two genera, i.e., Leptolalaxand Leptobrachella. However, the relationships among the genera of Megophryinaewere largely unresolved, they recognized no monophyletic groups above the generalevel. A more thorough sampling will likely foster a better taxonomic solution.3) The larval evolutionary scenario in Megophryidae.Type A is characteristicof normal-mouthed with multiple tooth rows, representing the tadpole type of theMRCA of Chinese megophryids. Type B is characteristic of normal-mouthed withreduced tooth rows, prolonging labium, and integumetary glands. Type C ischaracteristic of no labial teeth and smaller umbeliform oral disc. Type D ischaracteristic of no labial teeth, enlarged umbeliform oral disc, representing the tadpoleof the MRCA of subfamily Megophryinae. A previous hypothesis, referring tofunnel-shaped oral discs as an apomorphy, is supported.4) The larval adaptation to habitats in Megophryidae. Tadpoles generallyadhere to substrates using their mouths, and the microhabitat that the tadpoles occupyreflects the degree of adhesion and oral complexity. The morphological changes inmegophryid tadpoles virtually allow a progressive adaptation to a changing habitatfrom faster water to slower water. Within the tadpoles of Type A to type D, the TOTbecomes smaller and smaller, and the oral disc orientates from anteroventral toumbelliform upturned, and eye position orientates from dorsal to lateral, and the trunkis more and more depressed and tail becomes relatively longer and slender. Within therunning water, the normal-mouthed with multiple tooth rows of Leptobrachiini tadpoles are correlated with lotic-suctorial, benthic feeders with anteroventral oraldisc and the largest body. With the water’s velocity decreasing, the lotic-adherentfeeders of Leptolalax tadpoles have tube-shaped labium with reduced tooth rows andintegumetary glands. And then, the smaller umbeliform in Brachytarsophrys tadpolesand the enlarged umbeliform oral disc in the Megophryini tadpoles are inhabitmicrohabitats of non-flowing backwaters of rivers, indicative of adaptive traits oflotic-neustonic surface feeders. The scheme of megophryid tadpoles andmicrohabitats provided the first clear evidence which congruent with the hypothesis ofAltig and Johnston (1989). The ecological divergence plays a general role in thedivergence and evolution of megophrid larvae. There is a definite correlation amongthe buccopharyngeal cavity, diet and feeding mechanisms, the tadpole graze orswallow the food particles, then through papillae which like a sieve and sort out foodparticles to the oesophagus. The tadpole of Leptobrachiinae possess multiple toothrows, wide intertooth distance as well as thick and sparse jaw sheath, these tadpolesinhabit bottom of the streams and graze on epiphyton or major detritus of organicmatter on the substrates, their prelingual papillae like single finger, the mechanicalpurpose of papillae served share in by tooth and jaw. The tadpoles of Megophryinaeoccur near the water surface of small streams and are the filter feeder, their dietincludes plankton and organic debris floating on the water surface, those tadpolepossess weak jaw, their prelingual papillae like spoon, the mechanical purpose ofpapillae served mostly for sieve.