Three days of intermittent stretching after muscle disuse alters the proteins involved in force transmission in muscle fibers in weanling rats

The aim of this study was to determine the effects of intermittent passive manual stretching on various proteins involved in force transmission in skeletal muscle. Female Wistar weanling rats were randomly assigned to 5 groups: 2 control groups containing 21- and 30-day-old rats that received neither immobilization nor stretching, and 3 test groups that received 1) passive stretching over 3 days, 2) immobilization for 7 days and then passive stretching over 3 days, or 3) immobilization for 7 days. Maximal plantar flexion in the right hind limb was imposed, and the stretching protocol of 10 repetitions of 30 s stretches was applied. The soleus muscles were harvested and processed for HE and picrosirius staining; immunohistochemical analysis of collagen types I, III, IV, desmin, and vimentin; and immunofluorescence labeling of dystrophin and CD68. The numbers of desmin- and vimentin-positive cells were significantly decreased compared with those in the control following immobilization, regardless of whether stretching was applied (P<0.05). In addition, the semi-quantitative analysis showed that collagen type I was increased and type IV was decreased in the immobilized animals, regardless of whether the stretching protocol was applied. In conclusion, the largest changes in response to stretching were observed in muscles that had been previously immobilized, and the stretching protocol applied here did not mitigate the immobilization-induced muscle changes. Muscle disuse adversely affected several proteins involved in the transmission of forces between the intracellular and extracellular compartments. Thus, the 3-day rehabilitation period tested here did not provide sufficient time for the muscles to recover from the disuse maladaptations in animals undergoing postnatal development.

Type of dietary lipids and storing time on egg stability

The objective of this work was to evaluate the influence of diets containing different lipid sources on eggs quality during refrigerated storage, on yolk fatty acid composition, and on cholesterol in the yolk. Four diets were used containing Soy Oil (SO), Sunflower Seed (SS), and Meat and Bone Meal + Soy Oil (MBM + SO) or Meat and Bone Meal + Tallow (MBM + TA). The experiment followed a factorial design 4 × 3 with four dietary treatments and three storage times. The eggs were stored at 4 °C for 0, 30, and 60 days. The collected eggs were analyzed for egg weight loss, Haugh units, yolk moisture, yolk lipid oxidation, and cooked yolk firmness. Refrigerated storage reduced Haugh units, and increased yolk moisture. Sixty days of storage time reduced the firmness of hard-cooked yolk. There was an interaction between dietary treatment and storage time for egg weight loss and lipid oxidation. With regard to yolk fatty acid profile, MBM + TA diet increased the contents of palmitic and palmitoleic acids. The levels of oleic and arachidonic acids were higher in yolks from birds fed with SS diet. Linoleic acid level was higher in the yolk from treatment with SO diet. Diets containing MBM + SO induced higher levels of docosahexaenoic acid. Yolk cholesterol content was reduced with the inclusion of SS in the diet. Therefore, the type of lipid present in the diet and refrigerated storage for 60 days at 4 °C can affect the egg quality.

Not any type of rice performs equally to improve lactose-induced diarrhea characteristics in rats: is amylose an antidiarrheal factor?

The effectiveness of different types of rice in relation to their ability to accelerate diarrhea recovering was evaluated in a rat model of osmotic diarrhea (OD). Animals (90-100 g) received protein free diet until reaching up to 20% weight loss, followed by lactose rich diet (LRD) to induce osmotic diarrhea. Rats presenting osmotic diarrhea were divided into 4 groups, which received lactose rich diet for 4 days from 8 am to 8 pm, and one of three experimental products containing 6% rice flour differing in amylose content during the night: high (HA), intermediate (IA), and low (LA). A group fed stock diet containing equivalent amount of lactose was taken as control and allowed to recover spontaneously. Amylose and viscosity (cp at 25 °C, 10 rpm) of final products were determined. Effectiveness was expressed as the ratio between percentages of normal vs. diarrheic stools during the treatment. Fecal characteristics in this rat model improved only as result of feeding high amylose content (HA) type of rice. In this experimental model of osmotic diarrhea in young rats, the antidiarrheal effects of rice were strongly dependent on the type of diet used and appear to be related to its amylose content.

Rosemary extract and celery-based products used as natural quality enhancers for colonial type salami with different ripening times

This study aimed to evaluate the use of rosemary (Rosmarinus officinalis) extract (RE), celery (Apium graveolis), and low levels of NO3 and NO2 as natural agents to enhance the quality of colonial salami. Salami was produced according to three treatments: (A) Control: 0.1% curing salt; (B) Rosemary: 0.05% curing salt + 0.5% RE (rosemary extract); and (C) Rosemary+celery: 0.14% Veg 503 + 0.27% Veg 504 (sea salt plus celery) + 0.5% of RE (rosemary extract). There was no effect (P > 0.05) of the treatments on water activity, Na content, and residual NO3 and NO2. Fatty acids C18:2 and C20:4 were reduced (P < 0.05) during the ripening period in the Control treatment indicating possible oxidation. The use of celery resulted in lower pH values (P < 0.05) in the salami. Reduced addition of NO3 and NO2 resulted in salami lighter in color (higher L* values, P < 0.05) at the 12th day of ripening. In conclusion, celery-based products proved to be an effective source of NO2 and NO3 for color development, but the low pH of the product indicates the need for better evaluation of its use in fermented salami. The RE (rosemary extract) reduced fat oxidation in salami, but this needs further evaluation.

Quality evaluation of parmesan-type cheese: a chemometric approach

Parmesan-type cheeses are the most consumed special cheeses in Brazil. It is generally sold in retail shops, either grated or in wedge-shaped pieces, and its quality varies considerably, which is reflected directly in its price. There is lack of processing standardization and, since the ripening period is fundamental for the quality of this hard, semi-fat cooked cheese, this stage seems to be the thin line between low and high quality products. It is important to note that the Italian Parmegiano Reggiano is matured for a period of twelve months, as well as its rival Grana Padano, and this long ripening period causes changes making them gourmet, highly-valued cheeses. In the present study, twelve different Parmesan-type cheeses were purchased from the Brazilian retail market and evaluated for microbiological, physicochemical, and instrumental parameters. Heterogeneous quality was confirmed by microbiological problems detected in the samples and physicochemical composition that did not meet current Brazilian specifications. The use of principal component analysis and hierarchical cluster analysis made it possible to separate the samples into three distinct groups, mainly due to different acidity and moisture levels, water activity, and hardness values. The price per kg was also considered and was correlated with moisture, acidity, and texture.

Effect of loading type on the fatigue strength of symmetric and asymmetric welded joints made of ultra high strength steel

In this study, finite element analyses and experimental tests are carried out in order to investigate the effect of loading type and symmetry on the fatigue strength of three different non-load carrying welded joints. The current codes and recommendations do not give explicit instructions how to consider degree of bending in loading and the effect of symmetry in the fatigue assessment of welded joints. The fatigue assessment is done by using effective notch stress method and linear elastic fracture mechanics. Transverse attachment and cover plate joints are analyzed by using 2D plane strain element models in FEMAP/NxNastran and Franc2D software and longitudinal gusset case is analyzed by using solid element models in Abaqus and Abaqus/XFEM software. By means of the evaluated effective notch stress range and stress intensity factor range, the nominal fatigue strength is assessed. Experimental tests consist of the fatigue tests of transverse attachment joints with total amount of 12 specimens. In the tests, the effect of both loading type and symmetry on the fatigue strength is studied. Finite element analyses showed that the fatigue strength of asymmetric joint is higher in tensile loading and the fatigue strength of symmetric joint is higher in bending loading in terms of nominal and hot spot stress methods. Linear elastic fracture mechanics indicated that bending reduces stress intensity factors when the crack size is relatively large since the normal stress decreases at the crack tip due to the stress gradient. Under tensile loading, experimental tests corresponded with finite element analyzes. Still, the fatigue tested joints subjected to bending showed the bending increased the fatigue strength of non-load carrying welded joints and the fatigue test results did not fully agree with the fatigue assessment. According to the results, it can be concluded that in tensile loading, the symmetry of joint distinctly affects on the fatigue strength. The fatigue life assessment of bending loaded joints is challenging since it depends on whether the crack initiation or propagation is predominant.

Corporate Entrepreneurship in Healthcare Organizations: An explorative study of employees’ corporate entrepreneurial behavior, job satisfaction and turnover intention

The Finnish healthcare industry is currently facing significant challenges due to economic crises, aging population and major structural reforms, which have resulted in decreased job satisfaction and increased levels of turnover. This proposes that healthcare organizations need to come up with new, creative means to tackle these issues. Several researchers have argued that corporate entrepreneurship may be the necessary means to achieve this. As previous research has mainly focused on examining this concept from organizational perspective, this study looks at how it occurs on the level of individual employees. The purpose of this study is to examine how corporate entrepreneurship is manifested in individual behavior, and how this type of behavior is associated with the individual’s job satisfaction and turnover intention. Additionally, this study will examine the differences in corporate entrepreneurial behavior between private and public sector organizations, as previous research suggests that these two may be characterized differently. Data was collected with the help of a literature review as well as a survey study, which was sent out to a number of employees of four different healthcare organizations, out of which three were public and one was a private sector organization. Six distinct behavioral characteristics were recognized in previous research, which make up the measure for corporate entrepreneurial behavior. Principal components were formed from the different areas of the survey (corporate entrepreneurial behavior, job satisfaction, turnover intention), after which the association of these components were examined with linear regression analysis, which proved that corporate entrepreneurial behavior is positively correlated with both job satisfaction and intention to leave the organization. Differences between sectors were analyzed with analysis of variance and cross tabulation analysis, but neither of these suggested that any significant differences would occur. These results suggest that employees who behave entrepreneurially tend to be more satisfied with their jobs, but also consider leaving their current organizations more often than others. This may be due to the fact that healthcare organizations are not fertile for entrepreneurial behavior, which will drive entrepreneurial individuals looking for employers who may be more supportive of this type of behavior. With growing levels of dissatisfaction as well as little room for entrepreneurial behavior, the studied organizations may actually be in the process of losing those employees who have the ability and desire to behave in such manner, and who could very well be those who will eventually come up with solutions for the major challenges that these organizations are facing.

Attitudes of second year diploma nurses in three community colleges toward the use of computers in the nursing role /

The effectiveness of various kinds of computer programs is of concern to nurse-educators. Using a 3x3 experimental design, ninety second year diploma student nurses were randomly selected from a total population at three community colleges in Ontario. Data were collected via a 20-item valid and reliable Likert-type questionnaire developed by the nursing profession to measure perceptions of nurses about computers in the nursing role. The groups were pretested and posttested at the beginning and end of one semester. Subjects attending College A group received a computer literacy course which comprised word processing with technology awareness. College B students were exposed to computer-aided instruction primarily in nursing simulations intermittently throughout the semester. College C subjects maintained their regular curriculum with no computer involvement. The student's t-test (two-tailed) was employed to assess the attitude scores data and a one-way analysis of variance was performed on the attitude scores. Posttest analysis revealed that there was a significant difference (p<.05) between attitude scores on the use of computers in the nursing role between College A and C. No significant differences (p>.05) were seen between College B and A in posttesting. Suggestions for continued computer education of diploma student nurses are provided.

Habitat selection of three rodents in a frequently burned boreal environment : productivity and habitat diversity

How does fire affect the plant and animal community of the boreal forest? This study attempted to examine the changes in plant composition and productivity, and small mammal demography brought about by fire in the northern boreal environment at Chick Lake, N.W.T. (65053fN, 128°14,W). Two 5*6 ha plots measuring 375m x 150m were selected for study during the summers of 1973 and 197^. One had been unburned for 120 years, the other was part of a fire which burned in the spring of 1969. Grids of 15m x 15m were established in each plot and meter square quadrats taken at each of the 250 grid intersections in order to determine plant composition and density. Aerial primary production was assessed by clipping and drying 80 samples of terminal new production for each species under investigation. Small mammal populations were sampled by placing a Sherman live trap at each grid intersection for ten days in every month. The two plots were similar in plant species composition which suggested that most regrowth in the burned area was from rootstocks which survived the fire. The plant data were submitted to a cluster analysis that revealed nine separate species associations, six of which occured in the burned area and eight of which occured in the control. These were subsequently treated as habitats for purposes of comparison with small mammal distributions. The burned area showed a greater productivity in flowers and fruits although total productivity in the control area was higher due to a large contribution from the non-vascular component. Maximum aerial productivity as dry wieght was measured at 157.1 g/m and 207.8 g/m for the burn and control respectively. Microtus pennsylvanicus and Clethrionomys rutilus were the two most common small mammals encountered; Microtus xanthognathus, Synaptomys borealis, and Phenacomys intermedius also occured in the area. Populations of M. pennsylvanicus and C. rutilus were high during the summer of 1973; however, M. pennsylvanicus was rare on the control but abundant on the burn, while C. rutilus was rare on the burn but abundant in the control. During the summer of 197^ populations declined, with the result that few voles of any species were caught in the burn while equal numbers of the two species were caught in the control. During the summer of 1973 M. pennsylvanicus showed a positive association to the most productive habitat type in the burn which was avoided by C. rutilus. In the control £• rutilus showed a similar positive association to the most productive habitat type which was avoided by M. pennsylvanicus. In all cases for the high population year of 1973# the two species never overlapped in habitat preference. When populations declined in 197^f "both species showed a strong association for the most productive habitat in the control. This would suggest that during a high population year, an abundant species can exclude competitors from a chosen habitat, but that this dominance decreases as population levels decrease. It is possible that M. pennsylvanicus is a more efficient competitor in a recently burned environment, while C. rutilus assumes this role once non-vascular regrowth becomes extensive.

Molecular cloning restriction enzyme analysis, bovine adenovirus type 2 genome

Adenoviruses are non-enveloped icosahedral-shaped particles which possess a double-stranded DNA genome. Currently, nearly 100 serotypes of adenoviruses have been identified, 48 of which are of human origin. Bovine adenoviruses (BAVs), causing both mild respiratory and/or enteral diseases in cattle, have been reported in many countries all over the world. Currently, nine serotypes of SAVs have been isolated which have been placed into two subgroups based on a number of characteristics which include complement fixation tests as well as the ability to replicate in various cell lines. Bovine adenovirus type 2 (BAV2), belonging to subgroup I, is able to cause pneumonia as well as pneumonic-like symptoms in calves. In this study, the genome of BAV2 (strain No. 19) was subcloned into the plasmid vector pUC19. In total, 16 plasmids were constructed; three carry internal San fragments (spanning 3.1 to 65.2% ), and 10 carry internal Pstl fragments (spanning 4.9 to 97.4%), of the viral genome. Each of these plasmids was analyzed using twelve restriction endonucleases; BamHI, CiaI, EcoRl, HiOOlll, Kpnl, Noll, NS(N, Ps~, Pvul, Saj, Xbal, and Xhol. Terminal end fragments were also cloned and analyzed, sUbsequent to the removal of the 5' terminal protein, in the form of 2 BamHI B fragments, cloned in opposite orientations (spanning 0 to 18.1°k), and one Pstll fragment (spanning 97.4 to 1000/0). These cloned fragments, along with two other plasmids previously constructed carrying internal EcoRI fragments (spanning 20.6 to 90.5%), were then used to construct a detailed physical restriction map using the twelve restriction endonucleases, as well as to estimate the size of the genome for BAV2(32.5 Kbp). The DNA sequences of the early region 1 (E1) and hexon-associated gene (protein IX) have also been determined. The amino acid sequences of four open reading frames (ORFs) have been compared to those of the E1 proteins and protein IX from other Ads.

Self-directedness, personality type and success in self- employment

The new economy has spirited a transformation ofwork organizations from big business structures into smaller, more flexible enterprises, many of which are launched as self-employment initiatives. The growing trend towards increasing selfemployment in Canada demands aeritical review of how educational programs support and encourage entrepreneurship and self-employment opportunities for students ofpost-secondary and adult training programs. The focus ofthis study was threefold. First, the study examined whether a relationship exists between self-directedness and success in self-employment. Secondly, the purpose of this research was to determine whether a relationship exists between psychological type as defined by Jung and success in selfemployment. Finally, this research effort attempted to develop a model for identifying individual potential for self-employment based on combined factors of self-directedness and psychological type. Success was measured in three stages: 1) Did the subject start a selfemployment initiative? 2) Did the business survive six months? 3) Did the business survive one year? The research went beyond classroom training activities to determine whether individuals actually started a business enterprise while participating ina self-employment program designed for individuals who were unemployed. Given that many people initiate a self-employment venture.without actually operating the business beyond the initial start-up, this research effort measured success based on a commitment of at least one year to the selfemployment initiative. Results ofthe study revealed that individuals with a high level of selfdirected learning readiness tended to be more likely to succeed in business in terms ofbusiness starts, survival for six months, and survival for one year. In addition, it was discovered that individuals who were extraverted intuitive types succeeded more often in business at all three levels than any other type. These findings supported a model using the SDLRS and the PET Type Check as predictors for success in entrepreneurial ventures.

The cloning and reconstitution of a bovine adenovirus type 2 E3 deletion mutant and the sequencing and analysis of the early 4 region

Recombinant Adenoviruses (Ads) have been shown to have potential applications in three areas: gene therapy, high level protein expression and recombinant vaccines.' At least three different locations within the Ad genome can be deleted and subsequently used for the insertion of foreign sequences. These include the Early 3 (E3), Early 1 (E1) and Early 4 (E4) regions. Viral vectors of this type have been well studied in Human Ads 2 and 5, however one has not yet been constructed for Bovine Adenovirus Type 2 (BAV2). The E3 region is located between 76.6 and 86 m.u. on the r-strand and is transcribed in a rightward direction. The gene products of the Early 3 region (E3) have been shown to be non-essential for viral replication, in vitro, but are required for host immunosurveillance. This study represents the cloning and reconstitution of a BAV2 E3 deletion mutant. A deletion of 1800bp was made within the E3 region of BAV2 and the thymidine kinase gene was subsequently inserted in the deleted area . . The plasmid pdlE3-4tk1 (23.4Kbp) was constructed and used to to facilitate homologous recombination with the wild type BAV2 to produce a mutant. Southern Blotting and Hybridization results suggest the presence of a BAV2 E3 deletion mutant with thymidine kinase sequences present. The E4 region of Human Adenovirus types 2 and 5 is located at the extreme right end of the genome (91.3 map units - 99.1 map units) and is transcribed in a leftward direction giving rise to a complicated set of differentially spliced mRNAs. Essentially there are 7 open reading frames (ORFs) encoding for at least 7 polypeptides. The gene products encoded by the E4 region have been shown to be essential for the expression of late viral genes, host cell shutoff and normal viral growth. We have cloned and sequenced the right end segment between 90.5 map units and 100 map units of the BAV2 genome. The results show several open reading frames which encode polypeptides exhibiting homology to three polypeptides encoded by the E4 region of human adenovirus type 2. These include the 14kDa protein encoded by ORF1, the 34kDa protein encoded by ORF6 and the 13kDa protein encoded by ORF3. The nucleotide sequence, restriction enzyme map, and ORF map of the E4 region could be very useful in future molecular manipulation of this region and could possibly explain the slow growth rate of BAV2 in MDBK cells.

Three people on the lawn near Memorial Hall, Chapman College, Orange, California

Three people are sitting on the lawn near Memorial Hall, Chapman College, Orange, California.

The impact of wine closure and packaging type, and light and temperature exposure on the concentration of 3-alkyl-2 -methoxypyrazines and other key constituents of wine

3-alkyl-2-methoxypyrazines (MPs) are grape- and insect-derived odor-active compounds responsible for vegetative percepts that are detrimental to wine quality when elevated. This study tested both the effect of closure/packaging types and light/temperature storage conditions on MPs (isopropyl-, secbutyl-, and isobutyl-MP) in wine. An MP-emiched wine rapidly (after 140 hours) and significantly decreased in MP concentration after natural and synthetic cork contact (immersion of closures in wine). This decrease was greatest with synthetic closures (70% - 89% reduction) and secbutyl-MP. Subsequently storage trials tested the effects of commercial closure/packaging options (natural cork, agglomerate cork, synthetic corks, screwcaps and TetraPak® cartons) on MPs in MP-emiched Riesling and Cabernet Franc over 18 months. Regardless of packaging, isobutyl-MP was the most altered from bottling. Notably, all MP levels tended to decrease to the greatest extent in TetraPak® cartons (~34% for all MPs) and there was evidence of contribution ofisoproyl- and secbutyl-MP from cork-based closures (i.e. ~30% increase in secbutyl-MP after 6 months) or from an unidentified wine constituent. To test the effects of various light/temperature conditions (light exposed at ambient temperature in three different bottle hues, light excluded at ambient temperature and light excluded at a "cellar" temperature (14°C)), MP-emiched Riesling and Cabernet Franc were also analyzed for MP concentrations over 12 months. MPs did not vary consistently with light or temperature. Other odorants and physico-chemical properties were tested in all wines during storage trials and closely agree with previous literature. These results provide novel insights into MPs during ageing, interactions with packaging and storage conditions, and assist in the selection of storage conditions/packaging for optimal wine quality.

Using Effective Teaching Strategies and Personality Type to Enhance the Mathematics Classroom: A Handbook for Intermediate Math Teachers

This project addressed the need for more insightful, current, and applicable resources for intermediate math teachers in Canadian classrooms. A need for a handbook in this division seemed warranted by a lack of government resource support. Throughout an extensive review of the literature, themes and topics for the handbook emerged. The handbook was designed to not only provide educators with examples of effective teaching strategies within the mathematics classroom but to also inform them about the ways in which their personal characteristics and personality type could affect their students and their own pedagogical practices. Three teaching professionals who had each taught in an intermediate math class within the past year evaluated the handbook. The feedback received from these educators was directly applied to the first draft of the handbook in order to make it more accessible and applicable to other math teachers. Although the handbook was written with teachers in mind, the language and format used throughout the manual also make it accessible to parents, tutors, preservice education students, and educational administrators. Essentially, any individual who is hoping to inspire and educate intermediate math students could make use of the content within the handbook.