Contribuição ao estudo do «vermelhão» do algodoeiro (Gossipium herbaceum)

During the years 1948, 1949 and 1951 a disease occurred in the cotton crops of the state of S. Paulo Brazil (S. Am.), which caused a severe drop in yields. The abnormality was characterized by a typical reddish - purple color of the leaves, being by this reason, called "vermelhão", that is, reddening of the cotton plant. The disease was associated with a dry season. Among the several hypotheses raised to explain the causes of the disease were: insect attack, potassium deficiency - where from the name "potash hunger" was also given -, and magnesium deficiency: In order to study the problem the Department of Agricultural Chemistry of the College of Agriculture of the University of São Paulo, at Piracicaba, carried out a series of experiments as follows: 1. pot experiments in which soil of one of the affected regions was used ("terra roxa", a red-brownish soil derived from basalt); 2. pot-soil experiments varying the moisture supplied; 3. sand culture experiments omitting certain elements from the nutrient solutions; 4. field plot experiments, conducted on a sandy soil; three different varieties were employed: Texas, Express, and I.A. 817; magnesium was applied either as sulfate or dolomitic limestone. All the experiments were completed with suitable chemical analyses. The results can be summarized as follows: 1. in the first trial, the not properly manured pots (minus Mg), symptoms were registered which were similar to the symptoms observed in the field; it was possible to establish some differences among three different types of reddening: due to lack of K in the mixed fertilizers used, the characteristic cotton rust made its appearance, the red color in the leaves of the minus Mg plants was all alike that described in the current literature as a symptom of Mg-deficiency; in all the treatments ocurred a yellow-reddish color in the leaves associated with the latest stages of maturity; 2. in the second experiment it was verified that when the plants in the pots with soil were kept 75 per cent of the water holding capacity, no symptom of deficiency showed up; was true even for the plants not receiving neither K nor Mg; however, plants supplied with only 25 per cent of the water holding capacity showed, respectively, cotton rust in the minus K treatment and the red purplish color in the minus Mg series; 3. the sand culture experiment confirmed lack of Mg as the cause of "vermelhão", being potash deficiency the responsible for cotton rust; 4. in the field experiment, variety LA. 817 revealed to be the most sensitive to "vermelhão" when Mg was omitted from the fertilizers; symptoms of K deficiency appeared when no K was supplied; both magnesium sulfate and dolomitic limestone proved to be equally effective in the control of "vermelhão"; 5. the analyses of material collected both in the field as well in the pots revealed that leaf petiole in the most reliable part to indicate the K and Mg status of the plant; the variation in Mg content suffered by the plants showing different stages of "vermelhão was, quantitatively, at least as large as that in K content, however when one deals with K deficient plants, that is, plants showing the typical rust, no variation occurred in the Mg content, whereas K in the dry mater dropped from more than 1 per cent to less than half per cent. Then, the following general conclusions can be drawn: 1. Mg deficiency is the cause of "vermelhão" of cotton crops; 2. K deficiency also occurred, but in a lesser degree; 3. the climate conditions - especially the lack of rain influenced the soil dynamic of K, and especially Mg, bringing a severe reduction in their assimilability; 4. the "vermelhão" disease can be easily controlled upon additions either of magnesium sulfate or dolomitic limestone.

Amphibians and reptiles of the Big Bend region of Texas, by Karl P. Schmidt and Tarleton F. Smith.

v.29:no.5(1944)

Assessment of distribution and evolution of mechanical dyssynchrony in a porcine model of myocardial infarction by cardiovascular magnetic resonance.

BACKGROUND: We sought to investigate the relationship between infarct and dyssynchrony post- myocardial infarct (MI), in a porcine model. Mechanical dyssynchrony post-MI is associated with left ventricular (LV) remodeling and increased mortality. METHODS: Cine, gadolinium-contrast, and tagged cardiovascular magnetic resonance (CMR) were performed pre-MI, 9 ± 2 days (early post-MI), and 33 ± 10 days (late post-MI) post-MI in 6 pigs to characterize cardiac morphology, location and extent of MI, and regional mechanics. LV mechanics were assessed by circumferential strain (eC). Electro-anatomic mapping (EAM) was performed within 24 hrs of CMR and prior to sacrifice. RESULTS: Mean infarct size was 21 ± 4% of LV volume with evidence of post-MI remodeling. Global eC significantly decreased post MI (-27 ± 1.6% vs. -18 ± 2.5% (early) and -17 ± 2.7% (late), p < 0.0001) with no significant change in peri-MI and MI segments between early and late time-points. Time to peak strain (TTP) was significantly longer in MI, compared to normal and peri-MI segments, both early (440 ± 40 ms vs. 329 ± 40 ms and 332 ± 36 ms, respectively; p = 0.0002) and late post-MI (442 ± 63 ms vs. 321 ± 40 ms and 355 ± 61 ms, respectively; p = 0.012). The standard deviation of TTP in 16 segments (SD16) significantly increased post-MI: 28 ± 7 ms to 50 ± 10 ms (early, p = 0.012) to 54 ± 19 ms (late, p = 0.004), with no change between early and late post-MI time-points (p = 0.56). TTP was not related to reduction of segmental contractility. EAM revealed late electrical activation and greatly diminished conduction velocity in the infarct (5.7 ± 2.4 cm/s), when compared to peri-infarct (18.7 ± 10.3 cm/s) and remote myocardium (39 ± 20.5 cm/s). CONCLUSIONS: Mechanical dyssynchrony occurs early after MI and is the result of delayed electrical and mechanical activation in the infarct.

Reforms of the Common Agricultural Policy and agriculture in Finland

Selostus: Euroopan unionin yhteisen maatalouspolitiikan uudistaminen ja Suomen maatalous

Agricultural phosphorus and water quality : sources, transport and management

Selostus: Maatalous, fosfori ja veden laatu: alkuperä, kulkeutuminen ja vesistökuormituksen hallinta

Monitoring and predicting crop growth and analysing agricultural ecosystems by remote sensing

Selostus: Maatalousekosysteemien analysointi ja sadon ennustaminen kaukokartoituksen avulla

The application of agricultural land rating and crop models to CO2 and climate change issues in Northern regions : the Mackenzie Basin case study

Selostus: Viljelyvyöhykkeiden ja kasvumallien soveltaminen ilmastonmuutoksen tutkimisessa: Mackenzien jokialue, Kanada

Three mechanical weed control techniques in spring cereals

Selostus: Kolme viljojen mekaanista rikkakasvintorjuntamentelmää

Land use response to agricultural policy and market movements on Finnish dairy-farms

Selostus: Tuki- ja hintamuutosten vaikutus maitotilojen pellon käyttöön

Arsenic and heavy metal concentrations in agricultural soils in South Savo province

Selostus: Etelä-Savon viljelysmaan arseeni- ja raskasmetallipitoisuudet

A two-phase composite in simple shear: Effective mechanical anisotropy development and localization potential

We present a combined shape and mechanical anisotropy evolution model for a two-phase inclusion-bearing rock subject to large deformation. A single elliptical inclusion embedded in a homogeneous but anisotropic matrix is used to represent a simplified shape evolution enforced on all inclusions. The mechanical anisotropy develops due to the alignment of elongated inclusions. The effective anisotropy is quantified using the differential effective medium (DEM) approach. The model can be run for any deformation path and an arbitrary viscosity ratio between the inclusion and host phase. We focus on the case of simple shear and weak inclusions. The shape evolution of the representative inclusion is largely insensitive to the anisotropy development and to parameter variations in the studied range. An initial hardening stage is observed up to a shear strain of gamma = 1 irrespective of the inclusion fraction. The hardening is followed by a softening stage related to the developing anisotropy and its progressive rotation toward the shear direction. The traction needed to maintain a constant shear rate exhibits a fivefold drop at gamma = 5 in the limiting case of an inviscid inclusion. Numerical simulations show that our analytical model provides a good approximation to the actual evolution of a two-phase inclusion-host composite. However, the inclusions develop complex sigmoidal shapes resulting in the formation of an S-C fabric. We attribute the observed drop in the effective normal viscosity to this structural development. We study the localization potential in a rock column bearing varying fraction of inclusions. In the inviscid inclusion case, a strain jump from gamma = 3 to gamma = 100 is observed for a change of the inclusion fraction from 20% to 33%.

Effect of Mechanical and Geometric Mismatching on Fatigue and Damage of Welded Joints

The future of high technology welded constructions will be characterised by higher strength materials and improved weld quality with respect to fatigue resistance. The expected implementation of high quality high strength steel welds will require that more attention be given to the issues of crack initiation and mechanical mismatching. Experiments and finite element analyses were performed within the framework of continuum damage mechanics to investigate the effect of mismatching of welded joints on void nucleation and coalescence during monotonic loading. It was found that the damage of undermatched joints mainly occurred in the sandwich layer and the damageresistance of the joints decreases with the decrease of the sandwich layer width. The damage of over-matched joints mainly occurred in the base metal adjacent to the sandwich layer and the damage resistance of the joints increases with thedecrease of the sandwich layer width. The mechanisms of the initiation of the micro voids/cracks were found to be cracking of the inclusions or the embrittled second phase, and the debonding of the inclusions from the matrix. Experimental fatigue crack growth rate testing showed that the fatigue life of under-matched central crack panel specimens is longer than that of over-matched and even-matched specimens. Further investigation by the elastic-plastic finite element analysis indicated that fatigue crack closure, which originated from the inhomogeneousyielding adjacent to the crack tip, played an important role in the fatigue crack propagation. The applicability of the J integral concept to the mismatched specimens with crack extension under cyclic loading was assessed. The concept of fatigue class used by the International Institute of Welding was introduced in the parametric numerical analysis of several welded joints. The effect of weld geometry and load condition on fatigue strength of ferrite-pearlite steel joints was systematically evaluated based on linear elastic fracture mechanics. Joint types included lap joints, angle joints and butt joints. Various combinations of the tensile and bending loads were considered during the evaluation with the emphasis focused on the existence of both root and toe cracks. For a lap joint with asmall lack-of-penetration, a reasonably large weld leg and smaller flank angle were recommended for engineering practice in order to achieve higher fatigue strength. It was found that the fatigue strength of the angle joint depended strongly on the location and orientation of the preexisting crack-like welding defects, even if the joint was welded with full penetration. It is commonly believed that the double sided butt welds can have significantly higher fatigue strength than that of a single sided welds, but fatigue crack initiation and propagation can originate from the weld root if the welding procedure results in a partial penetration. It is clearly shown that the fatigue strength of the butt joint could be improved remarkably by ensuring full penetration. Nevertheless, increasing the fatigue strength of a butt joint by increasing the size of the weld is an uneconomical alternative.

Materials developed by mechanical alloying and melt spinning

Materials science is a multidisciplinary research topic related to the development of physics and technology. Mechanical alloying of ribbon flakes is a two steps route to develop advanced materials. In this work, a Fe based alloy was obtained using three pathways: mechanical alloying, melt-spinning and mechanical alloying of previously melt-spun samples. Processing conditions allow us to obtain amorphous or nanocrystalline structures. Furthermore, a bibliographic revision of mechanical alloying is here presented