Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

What is this thing called Historical Archaeology?

Historical archaeology, in its narrow temporal sense -as an archaeology of the emergence and subsequent evolution of the Modern world- is steadily taking pace in Spanish academia. This paper aims at provoking a more robust debate through understanding how Spanish historical archaeology is placed in the international scene and some of its more relevant particularities. In so doing, the paper also stresses the strong links that have united historical and prehistorical archaeology since its inception, both in relation to the ontological, epistemological and methodological definition of the first as to the influence of socio-political issues in the latter. Such reflection is partly a situated reflection from prehistory as one of the paper’s authors has been a prehistorian for most of her professional life.

The Neolithic of El Niño cave (Ayna, Albacete) in the Sierra del Segura context

Since its excavation in the summer of 1973, El Niño cave has been considered a key site to understand the process of production economy and pottery technology introduction in South-eastern Iberian Peninsula, and especially to approach how such process could have affected people already settled in the Segura mountains. However, data from El Niño cave was very fragmentary, due to the lack of a broad study of Neolithic occupations of the site. In this paper, we present the analysis of pottery, lithic industry and faunal remains, as well as the existing dates from the site´s Holocene levels. The review of different evidence from the site allows suggesting that El Niño cave would have probably acted as a hunting and shepherding station, being a logistical site of larger places. However, limitations due to the fact that we are dealing with a 40- year-old excavation, prevent specifying how the process of Neolithic introduction in the Segura Mountains occurred.

The management of bone tools from the Bronze Age site of El Portalón of Cueva Mayor, Sierra de Atapuerca, Burgos

In this paper we analyze the set of Bronze Age bone tools recovered at the archaeological site of El Portalón of Cueva Mayor in the Sierra de Atapuerca (Burgos). The Bronze Age cultural period is the best represented in the cavity and its study has forced us to unify the different excavation and stratigraphical criteria undertaken from the earliest archaeological excavations developed by J.M. Apellániz during the 70s until the excavations of the current research team (EIA) since 2000. We propose here for the first time a relationship between the initial system of “beds” used by Apellániz and our recent sedimentary sequence that recognizes eleven stratigraphic levels radiometrically dated from the late Upper Pleistocene to the Middle Age. Within the bone industry assemblage we recognize a large variety of utensils and ornamental elements, with native and allochthonous features, that make evident a regional as well as long distance relationships of these populations of the interior of the Iberian Peninsula during the recent Prehistory.

La cerámica del yacimiento arqueológico de Castillejo del Bonete (Terrinches, Ciudad Real). Estudio morfológico y tecnólogico

El presente trabajo incluye el estudio de un amplio conjunto cerámico perteneciente al yacimiento arqueológico de la Edad del Cobre y Edad del Bronce de Castillejo del Bonete. La muestra fue recuperada de distintas áreas del asentamiento durante la campaña de excavación de 2012. La investigación ha tenido como fin conocer mejor la relación forma-función de las vasijas, su proceso de fabricación, así como el modelo productivo y las posibles manifestaciones simbólicas presentes en el repertorio analizado. La metodología utilizada para cumplir con los objetivos se ha basado en la recopilación de datos, considerando una serie de variables morfológicas y tecnológicas, y su procesamiento con el empleo de técnicas estadísticas sencillas.

Visibilidad y percepción en la construcción de un paisaje Prehistórico. El caso de Calviá (Mallorca, Islas Baleares)

El presente trabajo se centra en el estudio del papel que juega el control visual del espacio en las prácticas sociales de las comunidades prehistóricas. Este trabajo se articula a partir de un estudio de caso, el término municipal de Calviá, situado en el sureste de la isla de Mallorca, para analizar las diferentes formas de monumentalidad arquitectónica y cómo estas se constituyen cómo un punto de referencia social dentro del paisaje. Partiendo de una amplia horquilla temporal, que abarcaría el Bronce Naviforme (1550-850 AC), el período Talayótico (850-550 AC) y el Postalayótico (550-123 AC), se propone analizar los cambios y pervivencias en la construcción del paisaje, a través de estrategias de visibilidad, percepción y movimiento alrededor de los monumentos arquitectónicos. A través de la perspectiva de la Arqueología del Paisaje y mediante el uso de Sistemas de Información Geográfica (SIG) se propone un análisis de tendencias a largo plazo en la configuración social de un paisaje.

Fronteras en construcción: Diferenciación social y desterritorialización en el Sur ibérico (siglos IX-VI a.C.)

Durante las tres últimas décadas, numerosos/as arqueólogos/as han discutido extensamente sobre el ritual funerario original de las poblaciones del sur ibérico entre los siglos ix y vi a.c., esto es, cremación o inhumación. Este debate está además conectado con la existencia o no de complejidad social antes de la llegada fenicia, con la aparición de una élite “orientalizada” y con la adopción de nuevos objetos y prácticas por las poblaciones locales. En este artículo hago uso del concepto deleuziano de “desterritorialización” y lo asocio con el de “frontera” desarrollado por anzaldúa para interpretar la sociedad del sur ibérico. Para ello, analizo la evidencia funeraria indígena y cuestiono la división estricta entre cremación e inhumación en la región; así como examino la profundidad y significado de los cambios funerarios en las comunidades locales.

La estructuración del espacio urbano y productivo de Gadir durante la fase urbana clásica: Cambios y perduraciones

La reafirmación del modelo político-administrativo ciudadano tras la fase arcaica colonial abre una nueva etapa de prosperidad en la antigua fundación tiria. El esplendor de Gadir en el s. V a.C. se refleja en los textos clásicos y en los hallazgos arqueológicos y, sin embargo, nuestros conocimientos sobre el desarrollo histórico de la ciudad de época púnica son muy limitados. El horizonte arcaico comienza a esclarecerse tras los hallazgos del Teatro Cómico que han sacado a la luz los restos de la fundación tiria y, sin embargo, la ciudad posterior continúa siendo una gran incógnita. ¿A qué lugar se traslada la población una vez que se abandona el asentamiento primitivo? ¿Quiénes son los individuos enterrados en los excepcionales sarcófagos antropoides? ¿Qué relación jerárquica existe entre el asentamiento insular y los situados en tierra firme? ¿Qué papel jugó la industria y comercialización de las salazones? Los interrogantes planteados son múltiples y no hacen más que evidenciar la incapacidad del paradigma tradicional para explicar el desarrollo histórico de la Gadir postcolonial y la necesidad de buscar nuevos modelos interpretativos.

Source Provenance of Pre-Historic Granitic Grindstones: The Case Study of the Cogotas I Archaeological Site of Arroyo Mucientes/San Lázaro (Castronuño, Valladolid) and a Proposal on the General Methodological Flow Process

The occurrence of hand grindstones at the Cogotas I archaeological sites is considered to be a common feature. Given that a distant-provenance raw material is frequently involved, determination of its source is a basic factor in the search for a better understanding of resource management and for any Political Economy approach. To progress in these directions an overall study should be planned, using selected grindstones with a view to covering diverse sub-zones of the Cogotas I dispersal area, especially because of its considerable distance from the granite basement source. Such a study may today includes diverse analytical procedures combining successive geographic, petrographic, mineralogical and geochemical criteria. To check the plausibility of the proposed methodology, a preliminary test has been carried out on two granite grindstones, obtained at the archaeological excavation at the Castronuño (Valladolid) Cogotian site, which is fifty km away from an inferred source area that was presumably located at Peñausende (Zamora). The result obtained validates the proposed operational process, yielding a generalizable knowledge to other similar situations.

Late Bronze Age in Eastern Iberian Peninsula: Archaeological Bases and Periodization

Research surrounding the transition from II to I millennium cal BC in Eastern Iberian Peninsula has a large and extensive tradition of investigation. However, the chances to do research on this historical process have been limited by the lack of a well contextualized and dated stratigraphic sequence. For this reason, recent studies in this topic have followed the periodic proposals which were developed in closer regions and areas, especially in the South East and North East of the Peninsula. The investigation perspective about the Late Bronze in Eastern Iberian has however now improved, with the development of several archaeological investigations, the increase in the number of sites being dated and more recent studies into the region helping to bring about this change. As such, it is now in the correct state to be able to propose a new periodization and delve into the changes which occurred in the transition between 1500 and 725 cal BC.

Preliminary results of the roman camp of La Cabeza del Cid (Hinojosa, Guadalajara, Spain)

The recent archaeological works in Hinojosa, allowed us to discover a camp from Roman republic period. It is located in the center of the Celtiberian area and its study could open interesting perspectives to study this historical period. This paper shows the results of its preliminary studies.

Cova dels Jurats at Calescoves (Alaior, Minorca). A Cave Shrine in the Talayotic context?

Excavations carried out in the Cova dels Jurats between 2010 and 2012 served to establish that, unlike the rest of the caves Calescoves, this one functioned as a sanctuary, with two different phases. The first one corresponds to the Final Talayotic Period, as the first cave shrine documented in the Talayotic culture. In Roman times, the place was still used as a sanctuary, but with a totally different ritual, linked to the inscriptions discovered at the entrance of the cave.