Development of an instrumentation system embedded on FPGA for real time measurement of mechanical vibrations in rotating machinery

The real-time monitoring of events in an industrial plant is vital, to monitor the actual conditions of operation of the machinery responsible for the manufacturing process. A predictive maintenance program includes condition monitoring of the rotating machinery, to anticipate possible conditions of failure. To increase the operational reliability it is thus necessary an efficient tool to analyze and monitor the equipments, in real-time, and enabling the detection of e.g. incipient faults in bearings. To fulfill these requirements some innovations have become frequent, namely the inclusion of vibration sensors or stator current sensors. These innovations enable the development of new design methodologies that take into account the ease of future modifications, upgrades, and replacement of the monitored machine, as well as expansion of the monitoring system. This paper presents the development, implementation and testing of an instrument for vibration monitoring, as a possible solution to embed in industrial environment. The digital control system is based on an FPGA, and its configuration with an open hardware design tool is described. Special focus is given to the area of fault detection in rolling bearings. © 2012 IEEE.

Development of a support vector machine-based navigation system for driving a mobile robot through paths in plantations

The use of mobile robots turns out to be interesting in activities where the action of human specialist is difficult or dangerous. Mobile robots are often used for the exploration in areas of difficult access, such as rescue operations and space missions, to avoid human experts exposition to risky situations. Mobile robots are also used in agriculture for planting tasks as well as for keeping the application of pesticides within minimal amounts to mitigate environmental pollution. In this paper we present the development of a system to control the navigation of an autonomous mobile robot through tracks in plantations. Track images are used to control robot direction by preprocessing them to extract image features. Such features are then submitted to a support vector machine in order to find out the most appropriate route. The overall goal of the project to which this work is connected is to develop a real time robot control system to be embedded into a hardware platform. In this paper we report the software implementation of a support vector machine, which so far presented around 93% accuracy in predicting the appropriate route. © 2012 IEEE.

Implementation of convective heating in Companhia Siderúrgica Nacional Blast Furnace runners

This paper describes the main characteristics and advantages of convective heating system for refractory lining, compared with conventional heating systems. In addition the main results obtained are presented with its implementation in CSN Blast Furnace #2 and 3 Runners, in terms of cost and equipment availability, as well as the need for ceramic coating to protect the lining against oxidation, arising from excessive air combustion. © 2012 Elsevier Ltd. All rights reserved.

Design of a labVIEW system applied to predictive maintenance

The implementation of vibration analysis techniques based on virtual instrumentation has spread increasingly in the academic and industrial branch, since the use of any software for this type of analysis brings good results at low cost. Among the existing software for programming and creation of virtual instruments, the LabVIEW was chosen for this project. This software has good interface with the method of graphical programming. In this project, it was developed a system of rotating machine condition monitoring. This monitoring system is applied in a test stand, simulating large scale applications, such as in hydroelectric, nuclear and oil exploration companies. It was initially used a test stand, where an instrumentation for data acquisition was inserted, composed of accelerometers and inductive proximity sensors. The data collection system was structured on the basis of an NI 6008 A/D converter of National Instruments. An electronic circuit command was developed through the A/D converter for a remote firing of the test stand. The equipment monitoring is performed through the data collected from the sensors. The vibration signals collected by accelerometers are processed in the time domain and frequency. Also, proximity probes were used for the axis orbit evaluation and an inductive sensor for the rotation and trigger measurement. © (2013) Trans Tech Publications, Switzerland.

Implementation of an AC model for transmission expansion planning considering reliability constraints

In this paper, a hybrid heuristic methodology that employs fuzzy logic for solving the AC transmission network expansion planning (AC-TEP) problem is presented. An enhanced constructive heuristic algorithm aimed at obtaining a significant quality solution for such complicated problems considering contingency is proposed. In order to indicate the severity of the contingency, 2 performance indices, namely the line flow performance index and voltage performance index, are calculated. An interior point method is applied as a nonlinear programming solver to handle such nonconvex optimization problems, while the objective function includes the costs of the new transmission lines as well as the real power losses. The performance of the proposed method is examined by applying it to the well-known Garver system for different cases. The simulation studies and result analysis demonstrate that the proposed method provides a promising way to find an optimal plan. Obtaining the best quality solution shows the capability and the viability of the proposed algorithm in AC-TEP. © Tübi̇tak..

Proposal for a code of good practice in statistics in Latin America and the Caribbean and implementation plan for 2012-2013

Incluye Bibliografía

South American transport statistics system (Setas)

A meeting of experts was held in Santiago, Chile on 27 and 28 October 1999 to mark the start of the project for the development of the South American Transport Statistics System (SETAS). The main objective of the meeting was to analyse different elements for the development of a SETAS pilot project. The meeting was attended by representatives of Bolivia, Brazil and Chile, the countries chosen to participate in this early stage of the project's development. Officials from the Latin American Integration Association (LAIA), and from the Statistics and Economic Projections Division and the Transport Unit, Natural Resources and Infrastructure Division of ECLAC also participated. This edition of the FAL Bulletin focuses on this regional effort, listing the specifications and components of the SETAS pilot plan and the results expected from its implementation.

Report on the implementation of the ECLAC work programme subregional activities for the Caribbean 2006-2007 biennium [Covering the period 1 Janurary 2006- 31 December 2007]

The focus of the activities of the Economic Commission for Latin America and the Caribbean/Caribbean Development and Cooperation Committee (ECLAC/CDCC) secretariat during the 2006-2007 biennium continued to be on assistance to member governments of the subregion with policy-making and development strategies, especially on issues relevant to the promotion of the economic, social, and environmental dimensions of development in the Caribbean. The Subregional Headquarters for the Caribbean worked closely with member countries of the CDCC in an effort to ensure the relevance of outputs which would inform policy options. This involved the strengthening of partnerships with both regional and subregional institutions and relevant agencies of the United Nations system working in the Caribbean. A major decision was taken to refocus the operational aspects of the secretariat to ensure that they were relevant to the development goals of its members. This involved the introduction of a thematic approach to the work of the office. One of the changes resulting from this was the restructuring and renaming of the Caribbean Documentation Centre. The Caribbean Knowledge Management Centre (CKMC), as it is now known, has changed its emphasis from organizing and disseminating documents, and is now a more proactive partner in the research undertaken by staff and other users of the service. The CKMC manages the ECLAC website, the public face of the organization. Newsletters and all other documents, including Information and Communications Technology (ICT) profiles of selected countries, prepared by the secretariat, are now available online at the ECLAC/CDCC website www.eclacpos.org . The Caribbean Knowledge Management Portal was launched at a meeting of information specialists in St. Vincent and the Grenadines in 2007. In addition to reaching a wider public, this measure was introduced as a means of reducing the cost of printing or disseminating publications. In spite of the unusually high vacancy rate, at both the international and local levels, during the biennium, the subregional headquarters accomplished 98 per cent of the 119 outputs earmarked for the period. Using vacant positions to carry out the assignments was not an easy task, given the complexity in recruiting qualified and experienced persons for short periods. Nevertheless, consultancy services and short-term replacement staff greatly aided the delivery of these outputs. All the same, 35 work months remained unused during the biennium, leaving 301 work months to complete the outputs. In addition to the unoccupied positions, the work of the subprogramme was severely affected by the rising cost of regional and subregional travel which limited the ability of staff to network and interact with colleagues of member countries. This also hampered the outreach programme carried out mainly through ad hoc expert group meetings. In spite of these shortcomings, the period proved to be successful for the subprogramme as it engaged the attention of member countries in its work either through direct or indirect participation. Staff members completed 36 technical papers plus the reports of the meetings and workshops. A total of 523 persons, representing member countries, participated in the 18 intergovernmental and expert meetings convened by the secretariat in the 24-month period. In its effort to build technical capacity, the subprogramme convened 15 workshops/seminars which offered training for 446 persons.

Contribuições da implantação da tecnologia de informação MES - Manufacturing Execution System - para a melhoria das dimensões competitivas da manufatura: estudo de caso Novelis Brasil Ltda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso de sistemas construídos de áreas alagadas (Constructed Wetland System - CWS) para tratamento de efluentes

A large proportion of fresh water is greatly impaired due to increasing pollution; this could be minimized through the expansion of investment in sanitation programs. But the major problem faced by third world countries and developing ones in this respect, is the high cost of projects and their implementation. In an attempt to find a simple technology, efficient and inexpensive, this study aimed to verify the effectiveness of using constructed wetland systems (CWS) for removal of bacteria and nutrients from sanitary sewer effluent from the STS Piracicamirim - Piracicaba - SP. The installation of prototypes was followed, and testing prior to regularize the flow held, but due to malfunction of these and outages of the STS activity can not evaluate the effectiveness of both as to the parameters proposed: temperature, pH, dissolved oxygen, conductivity, total dissolved solids (TDS), nitrite, nitrate, ammonia, total nitrogen, total phosphorus, chemical oxygen demand (COD), sulfide, sulfate, biochemical oxygen demand (BOD), total coliform and Escherichia coli. To establish results about the effectiveness of these types if the system were conducted literature reviews of papers published with the same theme. Analysis of these results showed fairly good efficiencies in wastewater treatment, especially for nutrients and coliforms

Estudo da implementação do Warehouse Management System em uma empresa produtora de embreagens

In the supply chain management there are several risk factors that must be mitigated to increase the flow of production and as a possible solution the literature cites the implementation of a warehouse management system, but this subject is few explored. This thesis has as main objective the study of the implementation of a warehouse management system in a company from the automotive sector that produces clutches. As results, are shown data of the characterization of items; as well as data and comparisons between disruptions in production reports due to lack of material before and after the implementation of WMS and is presented the result of a questionnaire applied to the involved on the implementation of the system, the results were associated with the risk factors on the implementation of the system studied on the literature review, and enumeration of the results that are not associated with any factors previously studied. And finally, the study is concluded and are recommended future studies related to the theme

Barriers related to non-adherence in a mammography breast-screening program during the implementation period in the interior of São Paulo State, Brazil

Mammography is the best exam for early diagnosis of breast cancer. Developing countries frequently have a low income of mammography and absence of organized screening. The knowledge of vulnerable population and strategies to increase adherence are important to improve the implementation of an organized breast-screening program. A mammography regional-screening program was implemented in a place around 54.238 women, aged 40-69 years old. It was proposed to perform biannual mammography free of cost for the women. We analyze the first 2 years of the implementation of the project. Mammography was realized in 17.964 women. 42.1% of the women hadn't done de mammography in their lives and these women were principally from low socio-economic status (OR=2.99), low education (OR=3.00). The best strategies to include these women were mobile unit (OR=1.43) and Family Health Program (OR=1.79). The incidence of early breast tumors before the project was 14.5%, a fact that changed to 43.2% in this phase. Multivariate analysis showed that the association of illiterate and the mobile unit achieve more women who had not performed mammography in their lives. The strategies to increase adherence to mammography must be multiple and a large organization is necessary to overpass the barriers related to system health and education.

A hybrid method for the solution of a sparse power system matrices on vector computers

This paper describes a methodology for solving a linear system of equations on vector computer. The methodology combines direct and inverse factors. The decomposition and implementation of the direct solution in a CRAY Y-MPZE/232, and the performance results are discussed.

Tokamak TCABR: Acquisition system, data analysis, and remote participation using MDSplus

Each plasma physics laboratory has a proprietary scheme to control and data acquisition system. Usually, it is different from one laboratory to another. It means that each laboratory has its own way to control the experiment and retrieving data from the database. Fusion research relies to a great extent on international collaboration and this private system makes it difficult to follow the work remotely. The TCABR data analysis and acquisition system has been upgraded to support a joint research programme using remote participation technologies. The choice of MDSplus (Model Driven System plus) is proved by the fact that it is widely utilized, and the scientists from different institutions may use the same system in different experiments in different tokamaks without the need to know how each system treats its acquisition system and data analysis. Another important point is the fact that the MDSplus has a library system that allows communication between different types of language (JAVA, Fortran, C, C++, Python) and programs such as MATLAB, IDL, OCTAVE. In the case of tokamak TCABR interfaces (object of this paper) between the system already in use and MDSplus were developed, instead of using the MDSplus at all stages, from the control, and data acquisition to the data analysis. This was done in the way to preserve a complex system already in operation and otherwise it would take a long time to migrate. This implementation also allows add new components using the MDSplus fully at all stages. (c) 2012 Elsevier B.V. All rights reserved.