Hindered settling of sand grains

The sedimentation rate of sand grains in the hindered settling regime has been considered to assess particle shape effects. The behaviour of various particulate systems involving sand has been compared with the widely used Richardson-Zaki expression. The general form of the expression is found to hold, in as much as remaining as a suitable means to describe the hindered settling of irregular particles. The sedimentation exponent n in the Richardson-Zaki expression is found to be significantly larger for natural sand grains than for regular particles. The hindered settling effect is therefore greater, leading to lower concentration gradients than expected. The effect becomes more pronounced with increasing particle irregularity. At concentrations around 0.4, the hindered settling velocity of fine and medium natural sands reduces to about 70% of the value predicted using existing empirical expressions for n. Using appropriate expressions for the fluidization velocity and the clear water settling velocity, a simple method is discussed to evaluate the sedimentation exponent and to determine the hindered settling effect for sands of various shapes.

Field observations of instantaneous water slopes and horizontal pressure gradients in the swash-zone

Field observations of instantaneous water surface slopes in the swash zone are presented. For free-surface flows with a hydrostatic pressure distribution the surface slope is equivalent to the horizontal pressure gradient. Observations were made using a novel technique which in its simplest form consists of a horizontal stringline extending seaward from the beach face. Visual observation, still photography or video photography is then sufficient to determine the surface slope where the free-surface cuts the line or between reference points in the image. The method resolves the mean surface gradient over a cross-shore distance of 5 m or more to within +/- 0.001, or 1/20th -1/100th of typical beach gradients. In addition, at selected points and at any instant in time during the swash cycle, the water surface slope can be determined exactly to be dipping either seaward or landward. Close to the location of bore collapse landward dipping water surface slopes of order 0.05-0.1 occur over a very small region (order 0.5 m) at the blunt or convex leading edge of the swash. In the middle and upper swash the water surface slope at this leading edge is usually very close to horizontal or slightly seaward. Behind the leading edge, the water surface slope was observed to be very close to horizontal or dipping seaward at all times throughout the swash uprush. During the backwash the water surface slope was observed to be always dipping seaward, approaching the beach slope, and remained seaward until a new uprush edge or incident bore passed any particular cross-shore location of interest. The observations strongly Suggest that the swash boundary layer is subject to an adverse pressure gradient during uprush and a favourable pressure gradient during the backwash. Furthermore, assuming Euler's equations are a good approximation in the swash, the observations also show that the total fluid acceleration is negative (offshore) for almost the whole of the uprush and for the entire backwash. The observations are contrary to recent work suggesting significant shoreward directed accelerations and pressure gradients occur in the swash (i.e., delta u/delta t > 0 similar to delta p/delta x < 0), but consistent with analytical and numerical solutions for swash uprush and backwash. The results have important implications for sediment transport modelling in the swash zone.

Beach face and berm morphodynamics fronting a coastal lagoon

This study documents two different modes of berm development: (I) vertical growth at spring tides or following significant beach cut due to substantial swash overtopping, and (2) horizontal progradation at neap tides through the formation of a proto-berm located lower and further seaward of the principal berm. Concurrent high-frequency measurements of bed elevation and the associated wave runup distribution reveal the details of each of these berm growth modes. In mode I sediment is eroded from the inner surf and lower swash zone where swash interactions are prevalent. The net transport of this sediment is landward only, resulting in accretion onto the upper beach face and over the berm crest. The final outcome is a steepening of the beach face gradient, a change in the profile shape towards concave and rapid vertical and horizontal growth of the berm. In mode 2 sediment is eroded from the lower two-thirds of the active swash zone during the rising tide and is transported both landward and seaward. On the falling tide sediment is eroded from the inner surf and transported landward to backfill the zone eroded on the rising tide. The net result is relatively slow steepening of the beach face, a change of the profile shape towards convex, and horizontal progradation through the formation of a neap berm. The primary factor determining which mode of berm growth occurs is the presence or absence of swash overtopping at the time of sediment accumulation on the beach face. This depends on the current phase of the spring-neap tide cycle, the wave runup height (and indirectly offshore wave conditions) and the height of the pre-existing berm. A conceptual model for berm morphodynamics is presented, based on sediment transport shape functions measured during the two modes of berm growth. (c) 2006 Elsevier B.V. All rights reserved.

Shedding some light on b-factors

The use of a Fickian (infinitesimal–mixing–length) framework for the case of turbulent mixing can necessitate the use of ad hoc modifications (e.g. β–factors) in order to reconcile experimental data with theoretical expectations. This is because in many cases turbulent mixing occurs on scales which cannot be considered infinitesimal. In response to this problem a Finite–Mixing– Length (FML) model for turbulent mixing was derived by Nielsen and Teakle. This paper considers the application of this model to the scenario of suspended sediment in steady, uniform channel flows. It is shown that, unlike the Fickian framework, the FML model is capable of explaining why β– factors are required to be an increasing function of ws/u*. The FML model does not on its own explain observations of β < 1, seen in some flat–bed experiments. However, some potential reasons for β < 1 are considered.

A Modeling Approach to Determine the Impacts of Land Use and Climate Change Scenarios on the Water Flux of the Upper Mara River

With the flow of the Mara River becoming increasingly erratic especially in the upper reaches, attention has been directed to land use change as the major cause of this problem. The semi-distributed hydrological model Soil and Water Assessment Tool 5 (SWAT) and Landsat imagery were utilized in the upper Mara River Basin in order to 1) map existing field scale land use practices in order to determine their impact 2) determine the impacts of land use change on water flux; and 3) determine the impacts of rainfall (0%, ±10% and ±20%) and air temperature variations (0% and +5%) based on the Intergovernmental Panel on Climate Change projections on the water flux of the 10 upper Mara River. This study found that the different scenarios impacted on the water balance components differently. Land use changes resulted in a slightly more erratic discharge while rainfall and air temperature changes had a more predictable impact on the discharge and water balance components. These findings demonstrate that the model results 15 show the flow was more sensitive to the rainfall changes than land use changes. It was also shown that land use changes can reduce dry season flow which is the most important problem in the basin. The model shows also deforestation in the Mau Forest increased the peak flows which can also lead to high sediment loading in the Mara River. The effect of the land use and climate change scenarios on the sediment and 20 water quality of the river needs a thorough understanding of the sediment transport processes in addition to observed sediment and water quality data for validation of modeling results.

Transporte longitudinal de sedimento na zona costeira de Natal/RN

The longshore sediment transport (LST) is determinant for the occurrence of morphological changes in coastal environments. Understanding their movement mechanisms and transport is an essential source of information for the project design and coastal management plans. This study aims to characterize, initially, the active hydrodynamic circulation in the study area, comprised of four beach sectors from the south coast of Natal, assessing the average annual LST obtained through three proven equations (CERC, Kamphuis and Bayram et al.), defining the best formulation for the study area in question, and analyze the seasonal variability and the decadal transport evolution. The coastal area selected for this work constitutes one of the main tourist corridors in the city, but has suffered serious damage resulting from associated effects of hydrodynamic forcings and their disorderly occupation. As a tool was used the Coastal Modelling System of Brazil (SMC-Brazil), which presents integrated a series of numerical models and a database, properly calibrated and validated for use in developing projects along the Brazilian coastline. The LST rates were obtained for 15 beach profiles distributed throughout the study area. Their extensions take into account the depth of closure calculated by Harllermeier equation, and regarding the physical properties of the sediment, typical values of sandy beaches were adopted, except for the average diameter, which was calculated through an optimization algorithm based on equilibrium profile formulation proposed by Dean. Overall, the results showed an intensification of hydrodynamic forcings under extreme sea wave conditions, especially along the headlands exist in the region. Among the analyzed equations, Bayram et al. was the most suitable for this type of application, with a predominant transport in the south-north direction and the highest rates within the order of 700.000 m3 /year to 2.000.000 m3 /year. The seasonal analysis also indicated a longitudinal transport predominance in the south to north, with the highest rates associated with the fall and winter seasons. In these periods are observed erosive beach states, which indicate a direct relationship between the sediment dynamics and the occurrence of more energetic sea states. Regarding the decadal evolution of transportation, it was found a decrease in transport rate from the 50’s to the 70’s, followed by an increase until the 2000’s, coinciding with the beginning of urbanization process in some stretches of the studied coastline.

Coastal geomorphology, processes and erosion at the tourist destination of Ferryland, Newfoundland and Labrador

The community of Ferryland is located on the southeastern coast of the Avalon Peninsula. The town traditionally relied on a fishing-based economy until the collapse of the fishery in the early 1990s. The present economy emphasizes sustainable development in the tourism sector with focus on archaeology, geotourism and other recreational uses. This paper discusses coastal erosion and impacts on sites and infrastructure using methods including: local knowledge, Real Time Kinematic (RTK) surveying and other survey techniques, seawater level measurement, meteorological data from a locally-installed station, custom-made drifter tube buoys, photography, HD video, and investigation using various modes of transport including inflatable boat. The major findings of the study include that the residents and stakeholders are genuinely interested in and knowledgeable of coastal erosion. The causes of coastal erosion include: large waves, surge, longshore currents, harbour oscillations, mass wasting, and location of infrastructure causing alterations of these processes. Freeze-thaw Cycles (FTC), rainfall, and gravity loosen and transport rock, till, and fill materials downslope. Large waves and currents transport the materials alongshore or into the nearshore. Harbour oscillations causing high velocity currents (> 2 m/s) are responsible for shoreline erosion and damage to property in The Pool. Historical resources such as gun batteries and ordnance pieces which date to the 1700s are being lost or threatened through coastal erosion of till and rock cliffs. Improper drainage and maintenance is responsible for erosion of roads and supporting shoulders, necessitating mitigation measures. Sediment transport and deposition during and after large wave and surge events lead to undercutting of infrastructure and increased risk of washover of existing infrastructure. Erosion is ongoing at Bois Island and Ferryland Head Isthmus through slope processes and undercutting; The Pool and the lower Colony of Avalon site through harbour oscillations and related undermining; the tombolo and the main breakwater through wave attack; and Meade’s Cove including the East Coast Trail through wave attack and undercutting. The floor of the latrine in the lower Colony of Avalon site indicates that sea level was approximately 1.25m below present in the 1620s, a relative sea level rise rate of 3.2 mm/y. The recommendations include suggested mitigation to reduce impacts specific to each site.

Lithofacies distribution in the western Bay of Plenty, New Zealand

Sediment dynamics on a storm-dominated shelf (western Bay of Plenty, New Zealand) were mapped and analyzed using the newly developed multi-sensor benthic profiler MARUM NERIDIS III. An area of 60 km × 7 km between 2 and 35 m water depth was surveyed with this bottom-towed sled equipped with a high-resolution camera for continuous close-up seafloor photography and a CTD with connected turbidity sensor. Here we introduce our approach of using this multi-parameter dataset combined with sidescan sonography and sedimentological analyses to create detailed lithofacies and bedform distribution maps and to derive regional sediment transport patterns. For the assessment of sediment distribution, photographs were classified and their spatial distribution mapped out according to associated acoustic backscatter from a sidescan sonar. This provisional map was used to choose target locations for surficial sediment sampling and subsequent laboratory analysis of grain size distribution and mineralogical composition. Finally, photographic, granulometric and mineralogical facies were combined into a unified lithofacies map and corresponding stratigraphic model. Eight distinct types of lithofacies with seawards increasing grain size were discriminated and interpreted as reworked relict deposits overlain by post-transgressional fluvial sediments. The dominant transport processes in different water depths were identified based on type and orientation of bedforms, as well as bottom water turbidity and lithofacies distribution. Observed bedforms include subaquatic dunes, coarse sand ribbons and sorted bedforms of varying dimensions, which were interpreted as being initially formed by erosion. Under fair weather conditions, sediment is transported from the northwest towards the southeast by littoral drift. During storm events, a current from the southeast to the northweast is induced which is transporting sediment along the shore in up to 35 m water depth. Shorewards oriented cross-shore transport is taking place in up to 60 m water depth and is likewise initiated by storm events. Our study demonstrates how benthic photographic profiling delivers comprehensive compositional, structural and environmental information, which compares well with results obtained by traditional probing methods, but offers much higher spatial resolution while covering larger areas. Multi-sensor benthic profiling enhances the interpretability of acoustic seafloor mapping techniques and is a rapid and economic approach to seabed and habitat mapping especially in muddy to sandy facies.

Mineralogy of sea-floor surface sediments, Sonne cruise SO202/1 to the North Pacific and Bering Sea

During expedition 202 of research vessel SONNE in 2009, 39 sea-floor surface sediments were sampled over a wide area across the North Pacific and the Bering Sea, which are well suited as reference archives of modern environmental processes. In this study, we used the samples to infer the documentation of land-ocean linkages of terrigenous sediment supply. We followed an integrated approach of grain-size analysis, bulk mineralogy, and clay mineralogy in combination with statistical data evaluation (end-member modelling of grain-size data, fuzzy-cluster analysis of mineralogical data), in order to identify the significant sources and modes of sediment transport in an overregional context. We also compiled literature data on clay mineralogy and updated those with the new data. Today, two processes of terrigenous sediment supply prevail in the study area: far-distant aeolian sediment supply to the pelagic North Pacific as well as hemipelagic sediment dispersal from nearby land sources by ocean currents along the continental margins and island arcs of the study area. The aeolian particles show the finest grain sizes (clay and fine silt), while the hemipelagic sediments have high abundances of sortable silt, particles >10 microns.

(Table 1) Sr, Nd and Os isotopic composition from marine sediments of the Bengal Fan

Sr, Nd, and Os isotopic data are presented for sediments from diverse locations in the Bay of Bengal. These data allow the samples to be divided into three groups, related to their sedimentary contexts. The first group, mainly composed of sediments from the shelf off Bangladesh and the currently active fan, has Sr and Nd characteristics consistent with a dominantly Himalayan source. Their 187Os/188Os ratios (~1.2-1.5) show that the average detrital material delivered by the Ganga-Brahmaputra (G-B) river system is not unusually radiogenic. A large difference in 187Os/188Os ratio exists between these Bengal Fan sediments and Ganga bedloads (187Os/188Os ~2.5, Pierson-Wickmann et al. (2000, doi:10.1016/S0012-821X(00)00003-0)). This difference mainly reflects addition of a less radiogenic Brahmaputra component, though mineralogical sorting and loss of radiogenic Os during transport may also play some role. The second sample group contains sediments from elsewhere in the Bay, particularly those located on the continental slope. They display Os isotopic compositions (0.99-1.11) similar to that of present seawater and higher Os and Re concentrations. These characteristics suggest the presence of a large hydrogenous contribution, consistent with the lower sedimentation rate of these samples. Sr and Nd ratios indicate that a significant fraction of these sediments is derived from erosion of non-Himalayan sources, such as the Indo-Burman range. These observations could be explained by the deflection of sediments from the G-B river system by westward currents in the head of the Bay. The third group contains only one sample, but shows that in addition to a Himalayan source, sediment discharge from Sri Lanka may influence the detrital component in the distal part of the fan. The similarity between the isotopic compositions of the group I R/V Sonne samples and those of Ocean Drilling Program Leg 116 (France-Lanord et al., 1993; Reisberg et al., 1997, doi:10.1016/S0012-821X(00)00003-0) suggests that the material eroding in the Himalayas has been roughly constant since the Miocene. The high Os isotopic ratios of leachates of both Sonne group I and Miocene Leg 116 sediments imply that much of the leachable highly radiogenic Os component was conserved during transport through the estuary or interaction with seawater. In constrast, samples with lower, but still relatively high, sedimentation rates (Sonne groups II and III and Pliocene Leg 116) seem to have significantly adsorbed or exchanged Os and Re with seawater. This suggests that in some cases the Os isotopic ratios of leachates of detrital sediments can be used to constrain the ancient marine Os record, or conversely, to date unfossiliferous sediments.

Near-bed hydrodynamics and turbulence below a large-scale plunging breaking wave over a mobile barred bed profile

Funded by The research presented in this paper is part of the SINBAD project. Grant Number: STW (12058) and EPSRC (EP/J00507X/1, EP/J005541/1)

Strontium and neodymium concentrations and isotopic compositions of Arctic marine sediments

Sr and Nd isotopic compositions of Arctic marine sediments characterize changes of sediment source regions and trace shelf-ocean particle pathways during glacial-interglacial transitions in the eastern Arctic Ocean. In the 140-ka sedimentary record of a marine core from Yermak Plateau, north of Svalbard, 87Sr/86Sr ratios and epsion-Nd values vary between 0.717 and 0.740 and 39.3 and 314.9, respectively. Sr and Nd isotopic composition both change characteristically during glacial-interglacial cycles and are correlated with the extension of the Svalbard/Barents Sea ice sheet (SBIS). The downcore variation in Sr and Nd isotopic composition indicates climatically induced changes in sediment provenance from two isotopically distinct end-members: (1) Eurasian shelf sediments as a distal source; and (2) Svalbard bedrock as a proximal source that coincide with a change in transport mechanism from sea ice to glacial ice. During glacier advance from Svalbard and intensified glacial bedrock erosion, epsion-Nd values decrease gradually to a minimum value of 314.9 due to increased input of crystalline Svalbard bedrock material. During glacial maxima, the SBIS covered the entire Barents Sea shelf and supplied increasing amounts of Eurasian shelf material to the Arctic Ocean as ice rafted detritus (IRD). Epsion-Nd values in glacial sediments reach maximum values that are comparable to the average value of modern Eurasian shelf and sea ice sediments (epsion-Nd = 310.3). This confirms ice rafting as a major sediment transport mechanism for Eurasian shelf sediments into the Arctic Ocean and trace a sediment origin from the Kara Sea/Laptev Sea shelf area. After the decay of the shelf-based SBIS, the glacial shelf sediment spikes during glacial terminations I (epsion-Nd = 310.6) and II (epsion-Nd = 310.1) epsion-Nd values rapidly decrease to values of 312.5 typical for interglacial averages. The downcore Sr isotopic composition is anticorrelated to the Nd isotopic composition, but may be also influenced by grain-size effects. In contrast, the Nd isotopic composition in clay- to silt-size fractions of one bulk sediment sample is similar to within 0.3-0.8 epsion-Nd units and seems to be a grain-size independent provenance tracer.

Grain-size analysis of surface sediments, continental margin off NW Africa

The terrigenous fraction of seabed sediments recovered along the north-west African continental margin illustrates spatial variability in grain size attributed to different transport mechanisms. Three subpopulations are determined from the grain-size analyses (n = 78) of the carbonate-free silt fraction applying an end-member modelling algorithm (G. J. Weltje, 1997). The two coarsest end-members are interpreted as representing aeolian dust, and the fine-grained end-member is related to fluvial supply. The end-member model thus allows aeolian fallout to be distinguished from fluvial-sourced mud in this area. The relative contributions of the end-members show distinct regional variations that can be related to different transport processes and pathways. Understanding present-day sediment dispersal and mixing is important for a better understanding of older sedimentary records and palaeoclimate reconstructions in the region.

Annotated record of the detailed examination of Mn deposits from BLM Leg Alpha Cruise, R/V Kana Keoki off the south-western coastal area of the Gulf of Mexico off Texas

The BLM-OCS (Bureau of Land Management-Outer Continental Shelf) program was designed to establish chemical, biological, and geological baseline on the South Texas Continental Shelf. The focus for the geological program was to establish the nature and amount of the suspended sediment in the water column, of the Holocene sediments on the shelf, and to identify and locate regions of geology conditions which may be hazardous to OCS operations. To accomplish these goals three cruises were planned. The report constitutes results of the first cruise. The results of these cruises associated with the subsequent laboratory analysis, enabled to establish a detailed baseline in order to provide significant geologic and biologic data for environmental assessment. Dredges recovered are available at University of Texas (see: BLM/OCS South Texas Outer Continental Shelf (STOCS) Project Sediment Data http://www.ngdc.noaa.gov/docucomp/page?xml=NOAA/NESDIS/NGDC/MGG/Geology/iso/xml/G02888.xml&view=getDataView&header=none).

Granulometry, mineralogy and organic matter content of permafrost core 5011-3

The combination of permafrost history and dynamics, lake level changes and the tectonical framework is considered to play a crucial role for sediment delivery to El'gygytgyn Crater Lake, NE Russian Arctic. The purpose of this study is to propose a depositional framework based on analyses of the core strata from the lake margin and historical reconstructions from various studies at the site. A sedimentological program has been conducted using frozen core samples from the 141.5 m long El'gygytgyn 5011-3 permafrost well. The drill site is located in sedimentary permafrost west of the lake that partly fills the El'gygytgyn Crater. The total core sequence is interpreted as strata building up a progradational alluvial fan delta. Four macroscopically distinct sedimentary units are identified. Unit 1 (141.5-117.0 m) is comprised of ice-cemented, matrix-supported sandy gravel and intercalated sandy layers. Sandy layers represent sediments which rained out as particles in the deeper part of the water column under highly energetic conditions. Unit 2 (117.0-24.25 m) is dominated by ice-cemented, matrix-supported sandy gravel with individual gravel layers. Most of the Unit 2 diamicton is understood to result from alluvial wash and subsequent gravitational sliding of coarse-grained (sandy gravel) material on the basin slope. Unit 3 (24.25-8.5 m) has ice-cemented, matrix-supported sandy gravel that is interrupted by sand beds. These sandy beds are associated with flooding events and represent near-shore sandy shoals. Unit 4 (8.5-0.0 m) is ice-cemented, matrix-supported sandy gravel with varying ice content, mostly higher than below. It consists of slope material and creek fill deposits. The uppermost metre is the active layer (i.e. the top layer of soil with seasonal freeze and thaw) into which modern soil organic matter has been incorporated. The nature of the progradational sediment transport taking place from the western and northern crater margins may be related to the complementary occurrence of frequent turbiditic layers in the central lake basin, as is known from the lake sediment record. Slope processes such as gravitational sliding and sheet flooding occur especially during spring melt and promote mass wasting into the basin. Tectonics are inferred to have initiated the fan accumulation in the first place and possibly the off-centre displacement of the crater lake.