933 resultados para Soil samples
Resumo:
The present study reports on an alternative methodology for the extraction of Humic Substances (HS) from the soil. The extractions were carried out with 0.5 M KOH for 3 h, at a ratio of 1:20 (m/v) under a nitrogen atmosphere. The HS were separated by centrifugation based on their solubility in alcaline solution. This methodology was compared with the usual procedure in three different soil samples and in one sample from vermicompost. The yield, E4/E6 ratio, ash content, and the elemental composition (C, H, O, N) of the extracted HS have been determined. The functional groups were identified by Fourier-transform infrared spectroscopy. This novel procedure adds a new perspective to the extraction of humic substances due to the short time and high performance of the extraction in relation to the usual procedure.
Resumo:
The application of agricultural fertilizers using variable rates along the field can be made through fertility maps previously elaborated or through real-time sensors. In most of the cases applies maps previously elaborated. These maps are identified from analyzes done in soil samples collected regularly (a sample for each field cell) or irregularly along the field. At the moment, mathematical interpolation methods such as nearest neighbor, local average, weighted inverse distance, contouring and kriging are used for predicting the variables involved with elaboration of fertility maps. However, some of these methods present deficiencies that can generate different fertility maps for a same data set. Moreover, such methods can generate inprecise maps to be used in precision farming. In this paper, artificial neural networks have been applied for elaboration and identification of precise fertility maps which can reduce the production costs and environmental impacts.
Resumo:
This paper supplies a revision about the main techniques of extraction, clean-up and pre-concentration of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) in water and soil samples, as well as chromatographic methods and immune assays for its identification and quantification.
Resumo:
Soil samples collected in the campus, UNESP, Araraquara, SP, were employed to isolate and characterize fungi strains with potential pectinolytic enzymes. These enzymes have arisen great interest due to its increasing application in the food industry. Two hundred forty six strains were isolated based on the appearance of colony on PDA medium, morphology (septate mycelia, nonseptate conidiophore, black conidia, and clublike spore-bearing head), after 48 h of growth at 30°C. Strains were selected in solid medium containing pectin citrus as sole carbon source and 0.5% rutenium red. The characterization of pectinolytic production was performed in solid culture and batch fermentation medium containing pectin citrus. The enzyme pectinolytic production was evaluated at 30°C, without agitation in 100 mL of medium containing 2% pectin citrus, 0.2% ammonium sulphate, 0.2% magnesium sulphate, and 0.05% potassium phosphate. The maximum pectinolytic activity (15U/mL) was observed in the medium after Aspergillus sp CFCF-0492 growth, while Aspergillus sp CFCF-CC1 showed the higher level of the final biomass. The pectinolytic activity is more preserved when the fungi-spores were maintained in agar-Czapeck medium.
Resumo:
With the significant increase in the incidence of invasive fungal infections during the last decade, mainly in patients with cancer, AIDS and other hospitalized patients who stay for long periods in intensive care units, there is an urgent need to screen for new antifungal agents possessing some advantages over known ones. This article reports a search in the field for a microorganism producing antibacterial and antifungal substances. Strains from soil samples collected in the region of Araraquara, Brazil, were isolated and analyzed for their antimicrobial potential against standard microorganisms (fungi Candida albicans and Aspergillus oryzae and bacteria Staphylococcus aureus and Escherichia coli). Out of the 64 strains isolated, 34 produced detectable antimicrobial activity. The streptomycete strain Ar4014 was chosen for further study, owing to its good antimicrobial activity against Candida albicans. Two of the fermentation media tested, 608-K and 602-B, were found to be best for the production and extraction of the antibiotic from Ar4014. After chromatographic separation of the crude extract on a silica column, the active fractions obtained showed UV-VIS absorption peaks characteristic of normal pentaenic antibiotics. The antibiotic was provisionally designated Ara 4014-75.
Resumo:
The spatial variability of physical and chemical properties of soil were evaluated to provide subsidies for management of the agricultural input. The chemical variables: P, organic matter (OM), K, Ca, Mg, pH, CEC and base saturation (BS); and physical variables: sand and clay were analysed. Soil samples were collected at two depths (0-0.2 and 0.6-0.8 m) located at irregular mesh of sampling in the region of Monte Alto, in a Yellow-Red Podzol (Alfissolo) (PVA), under different managements, resulting in 88 points in 1465 ha of total area; and at the region of Jaboticabal in a Red Latosol (LV) cultivated with sugarcane, resulting in 128 points in 2597 ha of total area. The chemical and physical soil properties studied showed spatial dependence, except CEC in 0.6-0.8 m layer for LV; Ca and clay at 0-0.2 m layer and P, OM, K, Mg, sand and clay in 0.6-0.8 m layer for PVA. The chemical and physical variables studied were adjusted to spherical and exponential models and some of them showed semivariogram without defined structure. The PVA showed low spatial continuity of chemical and physical properties, mainly in 0.6-0.8 m layer, which suffers less antropic influence. The LV soil showed more homogenous zones of fertility and granulometric composition.
Resumo:
The objective of this work was to identify the spatial variability of the natural erosion potential, soil loss and erosion risk in two intensely cultivated areas, in order to assess the erosion occurrence patterns. The soil of the area located at Monte Alto, São Paulo state, was classified as Paleudalf (PVA) with moderately slope, with different managements. The soil of the area located at Jaboticabal, São Paulo state, was classified as Haplortox(LV) with gentle slope and cultivated with sugarcane. A irregular grid was imposed on the experimental areas. Soil samples were obtained from 0-0.2 m depth at each grid point: 88 samples in Monte Alto area (1465 ha) and 128 samples at Jaboticabal area (2597 ha). In order to obtain the values of the studied variables USLE was applied at each grid point. Descriptive statistics were calculated, and geoestatistical analyses were performed for defining semivariograms. Kriging techniques to develop map showing spatial patterns in variability of selected soil attributes were used. All variables showed spatial dependence. The PVA soil showed higher erosion risk due to the slope and atual management compared to the soil LV.
Resumo:
The objective of this study was to determine the optimal water interval and its relationship with soybean yield. For this study, an experiment was carried out in Jaboticabal, São Paulo State, Brazil, in a Haplustox medium textured soil. The experimental design consisted of a completely randomized with subdivided plots (six compaction levels and four soybean cultivars), with four replications. The soil compaction levels were: T 0 = 0, T 1* = 1, T 1 = 1, T 2 = 2, T 4 = 4 and T 6 = 6 strides of a 11 ton tractor, on the same place, side by side on soil surface. In T 1* the compaction occurred when the soil was dry. In December, 2003 the soybean (Glycine max), cultivars IAC Foscarin 31, MG/BR 46 (Conquista), BRS/MG 68 (Vencedora) and IAC 8 - 2 were sown. After sowing, indeformed soil samples were collected in layers of 0.03-0.06, 0.08-0.11, 0.15-0.18 and 0.22-0.25 m for determination of soil water content and resistance to penetration curve and the optimal water content. According to model, the critical soil bulk density (Dsc) for soybean yield varied between cultivars from 1.56 to 1.64 Mg m -3. The soil bulk density at which the yield of soybean cultivars decreased was greater than the Dsc.
Resumo:
The conventional system for soil management and preparation has the intensive mechanization as its basic principle and that changes soil properties, especially physical ones, faster and significantly. This study aimed to obtain and compare physical properties such as distribution of particle sizes, density, distribution of pore sizes, curves of water retention and degradation index of a Red Latosol, under intensive cultivation and no-cultivation for six years. Soil samples were collected at depths of 0.1, 0.2, 0.3, 0.4, 0.6, 0.8 and 1.0 m. There was a clay increment as a result of cultivated soil increase. The no-till soil density decreased as depth increased; however, in the arable layer (0.3 m) of the cultivated soil, the opposite was verified. The largest volume of pores was verified in the cultivated soil, especially in the superficial layers. In the smallest applied tension (0.001 MPa), the cultivated soil retained more water; however, starting from 0.033 MPa, the highest humidity values occurred in the no-till soil. The highest degradation index was observed at a depth of 0.1 m in no-till soil. However, that value was superior (0.020) to what is physically considered very poor soil.
Resumo:
The aim of this work was to evaluate the effect of soil compaction caused by tractor wheel traffic on the limiting water range (LLWR), shoot growth and levels of compaction and four replications in a completely randomized experimental design. Soil samples with preserved structure were collected in the layers: 0.02-0.05; 0.08-0.11; 0.15-0.18 and 0.22-0.25m to determine macroporosity, microporosity, total porosity, bulk density, resistance to penetration and LLWR. The evaluated corn parameters were: plant and first spike height, steam diameter, number of spikes per plant, plant dry matter, dry matter of 1000 seeds and seed productivity. The soil compaction restricted all corn parameters except the number of spikes per plant and dry matter of 1000 seeds. The LLWR was reduced by the soil resistance to penetration, even in the tilled soil with bulk density of 1.12 Mg m-3. Only the treatment with 11 Mg tractor, repeated four times on the area, demonstrated bulk density above critical bulk density in the LLWR that was 1.37 Mg m-3, where the seed productivity was significantly smaller.
Resumo:
The high rate of mineralization of organic matter on savannah soils, which is reached fi ve times faster than in temperate regions, leads us to the challenge of electing the best system of management that maintains and/or increase it in soil, guaranteeing its quality and sustainability. In this sense the present research aimed to study the effects of green, organic and mineral manure on the chemical properties on the chemical properties of an Oxisol, on Savannah area, cultivated with cotton (Gossypium hirsutum) under conventional tillage and no-tillage in the pasture fi eld (Brachiaria decumbens) for 20 years. The experimental design was a randomized block design with split plots. The main plots consisted of two treatments: conventional tillage and no-tillage, and the subplots of six treatments: control (no fertilizer), mineral fertilizer recommended for the crop, according to the soil chemical analysis, organic fertilizer (cattle manure - 20 t ha-1), organic fertilizer (cattle manure - 20 t ha-1) + 1/2mineral fertilization recommended according to the analysis of soil, green manure-1 (Crotalaria juncea) and green manure-2 (Pennisetum americanum). There were studied the following soil chemical properties: P, OM, pH, K, Ca, Mg, Al, Al + H, S, exchange capacity cations and base saturation. The soil samples for the analysis were performed on layers of 0,00-0,05 m, 0,05-0,10 and 0,10-0,20 m. Then it came the following conclusions: the fertilization interfere in soil chemical properties and the preparation did not interfere, the cattle manure and its association with the mineral fertilizer caused increasing level elements in the soil, Crotalaria juncea and Pennisetum americanum did not infl uence on soil chemical properties.
Resumo:
Sugarcane is one of the most important crops of the Brazilian agribusiness and this importance justifies the use of techniques that allow the implementation of cultivation systems capable of reducing the variability of soil characteristics and the establishment of efficient agricultural planning. The aim of the present work was the planning and implementation of cultivation systems for sugarcane using geostatistical techniques, in the Pereira Barreto region, SP. An area of 505 ha was mapped using the global positioning system (GPS) and a Digital Elevation Model was elaborated (MDE). Soil samples were collected for 0-0.25 m depth, in each 7 ha, for their chemical attributes and texture characterization. Data were analyzed by descriptive statistics and geostatistics. The determination of the spatial distribution of soil granulometric and chemical attributes allowed the allocation of the studied sugarcane varieties according to soil fertility and clay content. The kriging maps of soil granulometric and chemical attributes brought useful information to the establishment of production environments with different soil and crop managements. The identification of different environments by means of geostatistical techniques allowed the precise planning of the sugarcane cultivation, as well as the adequacy of fertilization practices and the allocation of suitable sugarcane varieties adapted to the conditions imposed by differences in the soil attributes.
Resumo:
This investigation was carried out in Patrocínio Paulista municipality, located in the state of São Paulo, Brazil. Sugarcane has been extensively cultivated in the area in order to be utilized by the sugar and ethanol industries. The major effluent from the ethanol industry, vinasse, has been applied in the sugarcane fields as an alternative to supply several nutrients in crop production. Because it may represent a major environmental problem in that area, with implications to human health, soil samples from six points were collected and analyzed in order to evaluate the main factors related to the vinasse application in the ground. The importance of clays, iron oxides, organic matter and minor refractory minerals was also considered for explaining several relationships identified from the acquired data. © 2009 WIT Press.
Resumo:
This study aimed to evaluate the soil microbiota activity associated to S. aterrimum rhizosphere, during the phytoremediation process of a soil contaminated with trifloxysulfuron-sodium. S. aterrimum was cultivated in vases (6, 0 L) filled with soil, after trifloxysulfuron-sodium, at 7.5 g ha -1, was applied or not. Every 15 days after sowing (DAS), rhizospheric soil was collected for soil microbial respiration (amount of evolved CO 2) and microbial biomass carbon (MBC) analysis. To determine herbicide residues in the soil samples, after phytoremediation, Sorghum bicolor L. was cultivated as an indicator species, in addition to high performance liquid chromatography (HPLC) analysis. The microbiota associated to S. aterrimum rhizosphere showed to be sensitive to trifloxysulfuron-sodium and may be used as a microbiological indicator of disturbances caused by this herbicide in the environment. Regarding time for remediation, 45 days of development is enough for S. aterrimum to reduce residual trifloxysulfuron- sodium to a level not able to cause toxicity to the indicator plant.
Resumo:
The objective of this work was to verify the application of cluster analysis to evaluate soil erosion risk for different soil classes, soil slopes and soil managements. The study was conducted in a 33 ha section of a large field located in Carmo do Rio Claro County, MG, Brazil. The field had been managed in a corn/bean rotation under conventional tillage and under coffee plantation for seven years, both under sprinkle irrigation. Soil samples were obtained at every 10 m at 0.20 m depth along a transect of 1050 m. Soil erosion risk (A), natural potential erosion (PN), and erosion expectation (EE) were determined and submitted to a cluster and principal component analysis. The application of clustering analysis showed high correlation between the clusters and soil types. With clustering analysis plus principal components analysis, it was possible to identify groups of high and low soil erosion expectation, showing that the areas with higher soil erosion expectation are correlated to the soil class, soil slope and soil management. Among the studied variables, the natural potential erosion (PN) showed to be the most important factor to identify different soil erosion groups. The cluster analysis showed that 98% of the variables were classified within each group, and that they should be managed differently due to the soil erosive potential of each group,.