921 resultados para Shape memory polymers


Relevância:

20.00% 20.00%

Publicador:

Resumo:

To validate a simple partial coherence interferometry (PCI) based retinal shape method, estimates of retinal shape were determined in 60 young adults using off-axis PCI, with three stages of modeling using variants of the Le Grand model eye, and magnetic resonance imaging (MRI). Stage 1 and 2 involved a basic model eye without and with surface ray deviation, respectively and Stage 3 used model with individual ocular biometry and ray deviation at surfaces. Considering the theoretical uncertainty of MRI (12-14%), the results of the study indicate good agreement between MRI and all three stages of PCI modeling with <4% and <7% differences in retinal shapes along horizontal and vertical meridians, respectively. Stage 2 and Stage 3 gave slightly different retinal co-ordinates than Stage 1 and we recommend the intermediate Stage 2 as providing a simple and valid method of determining retinal shape from PCI data.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Image 200 participants include Erna Behr, Lenka Bederheimer, Paula Arendt, Elsa Trum, Hedwig Trum, Ruth Rosenau, Johanna Schoenmann and Martha Bruchfeld

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The microcommands constituting the microprogram of the control memory of a microprogrammed processor can be partitioned into a number of disjoint sets. Some of these sets are then encoded to minimize the word width of the ROM storing the microprogram. A further reduction in the width of the ROM words can be achieved by a technique known as bit steering where one or more bits are shared by two or more sets of microcommands. These sets are called the steerable sets. This correspondence presents a simple method for the detection and encoding of steerable sets. It has been shown that the concurrency matrix of two steerable sets exhibits definite patterns of clusters which can be easily recognized. A relation "connection" has been defined which helps in the detection of three-set steerability. Once steerable sets are identified, their encoding becomes a straightforward procedure following the location of the identifying clusters on the concurrency matrix or matrices.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Students in higher education typically learn to use information as part of their course of study, which is intended to support ongoing academic, personal and professional growth. Informing the development of effective information literacy education, this research uses a phenomenographic approach to investigate the experiences of a teacher and students engaged in lessons focused on exploring language and gender topics by tracing and analyzing their evolution through scholarly discourse. The findings suggest that the way learners use information influences content-focused learning outcomes, and reveal how teachers may enact lessons that enable students to learn to use information in ways that foster a specific understanding of the topic they are investigating.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Spatial dimensionality affects the degree of confinement when an electron-hole pair is squeezed from one or more dimensions approaching the bulk exciton Bohr radius (alpha(B)) limit. The etectron-hole interaction in zero-dimensional (0D) dots, one-dimensional (1D) rods/wires, and two-dimensional (2D) wells/sheets should be enhanced by the increase in confinement dimensions in the order 0D > 1D > 2D. We report the controlled synthesis of PbS nanomateriats with 0D, 1D, and 2D forms retaining at least one dimension in the strongly confined regime far below alpha(B) (similar to 10 nm for PbS) and provide evidence through varying the exciton-phonon coupling strength that the degree of confinement is systematically weakened by the loss of confinement dimension. Geometry variations show distinguishable far-field optical polarizations, which could find useful applications in polarization-sensitive devices.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Uncertainties associated with the structural model and measured vibration data may lead to unreliable damage detection. In this paper, we show that geometric and measurement uncertainty cause considerable problem in damage assessment which can be alleviated by using a fuzzy logic-based approach for damage detection. Curvature damage factor (CDF) of a tapered cantilever beam are used as damage indicators. Monte Carlo simulation (MCS) is used to study the changes in the damage indicator due to uncertainty in the geometric properties of the beam. Variation in these CDF measures due to randomness in structural parameter, further contaminated with measurement noise, are used for developing and testing a fuzzy logic system (FLS). Results show that the method correctly identifies both single and multiple damages in the structure. For example, the FLS detects damage with an average accuracy of about 95 percent in a beam having geometric uncertainty of 1 percent COV and measurement noise of 10 percent in single damage scenario. For multiple damage case, the FLS identifies damages in the beam with an average accuracy of about 94 percent in the presence of above mentioned uncertainties. The paper brings together the disparate areas of probabilistic analysis and fuzzy logic to address uncertainty in structural damage detection.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An experimental study is presented to show the effect of the cowl location and shape on the shock interaction phenomena in the inlet region for a 2D, planar scramjet inlet model. Investigations include schlieren visualization around the cowl region and heat transfer rate measurement inside the inlet chamber.Both regular and Mach reflections are observed when the forebody ramp shock reflects from the cowl plate. Mach stem heights of 3.3 mm and 4.1 mm are measured in 18.5 mm and 22.7 mm high inlet chambers respecively. Increased heat transfer rate is measured at the same location of chamber for cowls of longer lenghs is indicating additional mass flow recovery by the inlet.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The control of shapes of nanocrystals is crucial for using them as building blocks for various applications. In this paper, we present a critical overview of the issues involved in shape-controlled synthesis of nanostructures. In particular, we focus on the mechanisms by which anisotropic structures of high-symmetry materials (fcc crystals, for instance) could be realized. Such structures require a symmetry-breaking mechanism to be operative that typically leads to selection of one of the facets/directions for growth over all the other symmetry-equivalent crystallographic facets. We show how this selection could arise for the growth of one-dimensional structures leading to ultrafine metal nanowires and for the case of two-dimensional nanostructures where the layer-by-layer growth takes place at low driving forces leading to plate-shaped structures. We illustrate morphology diagrams to predict the formation of two-dimensional structures during wet chemical synthesis. We show the generality of the method by extending it to predict the growth of plate-shaped inorganics produced by a precipitation reaction. Finally, we present the growth of crystals under high driving forces that can lead to the formation of porous structures with large surface areas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Ystävä sä lapsien. Collections of Finnish language children s hymns and spiritual songs from 1824─1938 and their influence on the Hymnal 1938. The Hymnal has been the common song book of Lutheran parishes since the 1500s. In the beginning, the congregations sang the hymns from memory led by the choir or the church musician. The fundamentals of Christian faith are taught through the hymns, both in church and in family devotions. The Hymnal was the only song book of the church in Finland until the end of the 1800s. This study attempts to clarify when and by who were spiritual songs and hymns for children written in Finland. Research materials used were all the books I could find (approximately 200), whose headings were for pupils and young children in the home and school circles. The method of study is historical and analytical. In the first chapter, it is explained that children s literature in Finland differentiated from other literature at the end of the 1700s. Eric Juvelius published a small prayer book in 1781 with the prayer Gud, som hafver barnen kär / Jumala joka Lapsia rakasta. From that, after many Finnish translations, the first verse of the hymn Ystävä sä lapsien took shape. The second chapter considers singing instruction in the folk school from the beginning of the 1860s. Textbooks, including songbooks, were produced for the pupils. Some of the first pioneers in producing these materials were the teachers P.J. Hannikainen, Sofie Lithenius, Mikael Nyberg, Anton Rikström and Aksel Törnudd, as well as Hilja Haahti, Immi Hellén and Alli Nissinen, who were all teachers gifted in writing poetry. Several new spiritual songs appeared in the folk school songbooks. Hymns were sung often, especially in connection with church year celebrations. Children s songs in Christian education are discussed in the third chapter. The Lutheran Evangelical Association of Finland recognized children already in its early song collections. The illustrative teaching methods in the folk school influenced the Sunday school activities and especially the Sunday school hymns. Hymns introduced as exclusively for children and pupils which appear in the Hymnal from 1886 and the supplement to the 1923 Hymnal are explored in the fourth and fifth chapters. The study shows that the renewal of church life at the beginning of the 1900s also resulted in an increase of the number of spiritual songs for children. This is also seen in the diverse choice of songs in the supplementary materials from 1923. The final chapter deals with the School and Childhood section of the 1938 Hymnal. The Hymnal committee did not think that the already well known folk school and Sunday school songs received enough attention in the Hymnal. Those songs were, among others, Kautta tyynen, vienon yön, Oi, katsopa lintua oksalla puun, Olen Luojani pikku varpunen, Rakas Isä taivahan ja Tuolla keinuu pieni pursi. Heikki Klemetti, Ilmari Krohn, Armas Maasalo and Aarni Voipio influenced the opinion that the spiritual songs still were not suitable to be sung in church. Hymns for children and pupils were brought into the same line as the entire Hymnal. The same hymn tunes, which were mainly old ones, were used as common settings for numerous hymn texts. No special type of melody emerged for the children s hymns. It was still notable that hymns for children and pupils were collected at all. In addition, the Hymnal committee marked those verses suggested for singing in both the folk school and Sunday school with an asterisk (*) throughout the entire Hymnal.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Credence goods markets suffer from inefficiencies caused by superior information of sellers about the surplus-maximising quality. While standard theory predicts that equal mark-up prices solve the credence goods problem if customers can verify the quality received, experimental evidence indicates the opposite. We identify a lack of robustness with respect to heterogeneity in social preferences as a possible cause of this and conduct new experiments that allow for parsimonious identification of sellers’ social preference types. Our results confirm the assumed heterogeneity in social preferences and provide strong support for our explanation of the failure of verifiability to increase efficiency.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A generalised theory for the natural vibration of non-uniform thin-walled beams of arbitrary cross-sectional geometry is proposed. The governing equations are obtained as four partial, linear integro-differential equations. The corresponding boundary conditions are also obtained in an integro-differential form. The formulation takes into account the effect of longitudinal inertia and shear flexibility. A method of solution is presented. Some numerical illustrations and an exact solution are included.